检索结果-南通市图书馆

An Optimization Approach of IoD Deployment for Optimal Coverage Based on radio Frequency Model

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第6期139卷 2627-2647页

作者： Tarek Sheltami Gamil Ahmed ansar Yasar Computer Engineering Department Interdisciplinary Research Center of Smart Mobility and LogisticsKing Fahd University of Petroleum and MineralsDhahran31261Saudi Arabia Transportation research Institute(IMOB) Hasselt UniversityHasselt3500Belgium

recently,Internet of Drones(IoD)has garnered significant attention due to its widespread ***,deploying IoD for area coverage poses numerous limitations and *** include interference between neighboring drones,the need for directional antennas,and altitude restrictions for *** challenges necessitate the development of efficient *** research paper presents a cooperative decision-making approach for an efficient IoDdeployment to address these challenges *** primary objective of this study is to achieve an efficient IoDdeployment strategy thatmaximizes the coverage regionwhile minimizing interference between neighboring *** deployment problem,the interference increases as the number of deployed drones increases,resulting in bad quality of *** the other hand,deploying a few drones cannot satisfy the coverage *** accomplish this,an enhanced version of a concise population-based meta-heuristic algorithm,namely Improved Particle SwarmOptimization(IPSO),is *** objective function of IPSO is defined based on the coverage probability,which is primarily influenced by the characteristics of the antennas and drone altitude.A radio frequency(rF)model is derived to evaluate the coverage quality,considering both Line of Sight(LOS)and Non-Line of Sight(NLOS)down-link coverage probabilities for ground *** is assumed that each drone is equipped with a directional antenna to optimize coverage in a given *** simulations are conducted to assess the effectiveness of the proposed *** demonstrate that the proposed method achieves maximum coverage with minimum transmission ***,a comparison is made against Collaborative Visual Area Coverage Approach(CVACA),and a game-based approach in terms of coverage quality and convergence *** simulation results reveal that our approach outperforms both CVACA and the gamebased schemes in terms of coverage an

关键词： IoD line of sight optimal deployment IPSO rF model

Systematic review of the efficacy of data-driven urban building energy models during extreme heat in cities:Current trends and future outlook

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第5期17卷 695-722页

作者： Nilabhra Mondal Prashant Anand ansar Khan Chirag Deb David Cheong Chandra Sekhar Dev Niyogi Mattheos Santamouris Department of Architecture and regional Planning Indian Institute of Technology KharagpurKharagpurIndia Department of Geography Lalbaba CollegeUniversity of CalcuttaKolkataIndia School of Architecture Design and PlanningThe University of SydneyAustralia Department of the Built Environment National University of SingaporeSingapore Department of Geological Sciences Jackson School of GeosciencesThe University of Texas at AustinAustinUSA DepartmentofCivil Architecturaland Environmental EngineeringThe Universityof Texas at AustinAustinUSA Faculty of Built Environment University of New South WalesAustralia

Energy demand fluctuations due to low probability high impact(LPHI)micro-climatic events such as urban heat island effect(UHI)and heatwaves,pose significant challenges for urban infrastructure,particularly within urban *** short term load forecasting(STLF)of buildings in urban micro-climatic setting(UMS)is obscured by the complex interplay of surrounding morphology,micro-climate and inter-building energy *** urban building energy modelling(UBEM)approaches to provide quantitative insights about building energy consumption often neglect the synergistic impacts of micro-climate and urban morphology in short temporal *** order modelling,unavailability of rich urban datasets such as building key performance indicators for building archetypes-characterization,limit the inter-building energy dynamics consideration into *** addition,mismatch of resolutions of spatio-temporal datasets(meso to micro scale transition),LPHI events extent prediction around UMS as well as its accurate quantitative inclusion in UBEM input organization step pose another degree of *** review aims to direct attention towards an integrated-UBEM(i-UBEM)framework to capture the building load fluctuation over multi-scale spatio–temporal *** highlights usage of emerging data-driven hybrid approaches,after systematically analysing developments and limitations of recent physical,data-driven artificial intelligence and machine learning(AI-ML)based modelling *** also discusses the potential integration of google earth engine(GEE)-cloud computing platform in UBEM input organization step to(i)map the land surface temperature(LST)data(quantitative attribute implying LPHI event occurrence),(ii)manage and pre-process high-resolution spatio-temporal UBEM *** the potential of digital twin,central structed data models to integrate along UBEM workflow to reduce uncertainties related to building archetype characterizat

关键词： urban heat island(UHI) urbanmicro-climate urban morphology urban building energy modelling(UBEM) digitaltwin shorttermload forecasting(STLF) googleearthengine(GEE)

Surface morphology and cell viability of samarium(Ⅲ) oxide/chromium(Ⅲ) oxide/graphene oxide/polycaprolactone targeting wound dressing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第3期42卷 555-561,I0005页

作者： Muteb H.Alshammari Ahmed Onayzan Alshammari Mohamed Tharwat Elabbasy rafat Zreiq Faris Mohammed Albati M.A.El-Morsy A.A.Menazea Department of Health Informatics College of Public Health and Health InformaticsUniversity of Ha'ilHa'ilSaudi Arabia Department of Surgery College of MedicineUniversity of Ha'ilHa'ilSaudi Arabia Department of Public Health College of Public Health and HealthInformaticsHalUniversityHa'il2440Saudi Arabi Food Control Department Faculty of Veterinary MedicineZagazig UniversityZagazig44519Egypt Applied Science research Center Applied Science Private UniversityAmman541350Jordan College of Shariah and Law Ha'il UniversityHa'il2440Saudi Arabia College of Science and Humanities in Al-Kharj Physics DepartmentPlasma Technology and Material Science UnitPrince Sattam Bin Abdulaziz UniversityAl-kharj11942Saudi Arabia Physics Department Faculty of ScienceUniversity of DamittaNew Damietta34517.Egyp Spectroscopy Department Physics Research InstituteNational Research CentreDokki12622GizaEgypt

Combinations of metal and lanthanide oxides have been done through casted films for potential medical applications. In this regard, samarium(Ⅲ) oxide/chromium(Ⅲ) oxide/graphene oxide(GO)/polycaprolactone(PCL) based films nano-composites(NCs) were fabricated, pointing their utilization as a biological scaffold for wound dressing purposes. Also, samarium(Ⅲ) oxide and chromium(Ⅲ) oxide have been merged as promising optical constituents due to their unique optical behavior. The structural and compositional examination of the studied NCs was executed by X-ray diffraction(XrD), raman, and field emission scanning electron microscopy(FESEM). The Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL NC exhibits a surface with a lower roughness degree owing to the presence of GO. Cr_(2)O_(3)shows size reduction upon GO insertion to reach 1.2 μm as the average grain size, whilst Sm_(2)O_(3)records an average grain size of less than 1 μm. As well, the polymeric nano-compositions exhibit variation in contact angle values that hit 29.76°± 3.52°for Sm_(2)O_(3)/PCL, and 48.62°± 1.37°for Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL as the second lowest contact angle. The optical behavior contributes to absorption edge relocation along the x-axis from 1.7 eV for pure PCL, to 2.65 eV for Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL. regarding biological responses, the cell exposed to 2.5 μg/m L of Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL shows cell viability of 119.31%, while 5 μg/m L hits 99.6%. Additionally, the resulting cell attachment micrographs show layers of fibroblast tissue, besides the proliferation and growth of cultivated cells. Thus, the Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL scaffold provides 3D proliferation of fibroblast cells endorsing the wound healing process.

关键词： Wound healing Wound dressing Polycaprolactone Sm_(2)O_(3) Cr_(2)O_(3) rare earths

Analysis and Optimization of Operational and Pollutant Attributes of Diesel Engine with CNT-Infused Orange Peel Biodiesel-Diesel Blend Fuel

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 761-778页

作者： ranjeet rAI r.r.SAHOO Mechanical Engineering Department GLA UniversityMathura281406India Mechanical Engineering Department IIT(BHU)Varanasi221005India

The current study is performed to find sustainable solutions for the future of transportation and environmental *** conventional methods and experimental design table(L16 Orthogonal Array)techniques have been employed to examine and optimize a diesel-powered engine's operational and pollutant *** L16 Orthogonal Array is obtained through Taguchi's experimental design approach using Minitab 16 *** experimental design incorporated three control variables,namely engine speed,fuel type,and engine load,each with four *** operational parameters,namely brake thermal efficiency(BTE)and brake specific fuel consumption(BSFC),as well as the emission characteristics,including hydrocarbon(HC),carbon monoxide(CO),nitrogen oxide(NO),and smoke emissions,were acquired using the L16 orthogonal array(OA) and subsequently *** utilization of methodologies such as signal-to-noise(S/N) ratio and grey analysis was employed to determine the optimal operational state of the engine to achieve maximum performance while minimizing *** engine's ideal state of operation,in terms of BTE and BSFC,was determined to be at 75% engine load,1000 r/min engine speed,and using 10^(-4)(in vol) carbon nanotube incorporated 20% orange peel biodiesel(OPB20CNT100) blended fuel(A3-B1-C4).The study indicated that engine load significantly influenced BTE and BSFC,with 84.05% and 87.79% contribution factors,*** 25% engine load,1000 r/min,and OPB20CNT100 fuel(A1-B1-C4) CO,smoke,NO,and HC emissions were the *** load affects emissions the *** BSFC increased 3.10% and NO emissions 1.77%.BTE,CO,smoke,and HC emissions decreased by 1.9%,12.29%,47.05%,and 47.22%,respectively,at optimal operating conditions concerning diesel *** study shows that Taguchi-Grey's experimental design optimizes diesel engine operational and pollutant *** outcomes revealed that orange peel biodiesel infused with CNT can replace diesel fuel in a

关键词： Taguchi-Grey method OPB20CNT100 transesterification S/N ratio GrG HC CO and NO

Kinematic analysis of flexible bipedal robotic systems

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 795-818页

作者： r.FAZEL A.M.SHAFEI S.r.NEKOO Department of Mechanical Engineering Shahid Bahonar University of KermanKerman ***Iran Departamento de Ingenieria de Sistemas y Automatica Escuela Técnica Superior de IngenieriaUniversidad de SevillaSeville 41092Spain

In spite of its intrinsic complexities,the passive gait of bipedal robots on a sloping ramp is a subject of interest for numerous *** distinguishes the present research from similar works is the consideration of flexibility in the constituent links of this type of robotic *** is not a far-fetched assumption because in the transient(impact)phase,due to the impulsive forces which are applied to the system,the likelihood of exciting the vibration modes increases ***,the human leg bones that are involved in walking are supported by viscoelastic muscles and ***,for achieving more exact results,it is essential to model the robot links with viscoelastic *** this end,the Gibbs-Appell formulation and Newton's kinematic impact law are used to derive the most general form of the system's dynamic equations in the swing and transient phases of *** most important issue in the passive walking motion of bipedal robots is the determination of the initial robot configuration with which the system could accomplish a periodic and stable gait solely under the effect of gravitational *** extremely unstable nature of the system studied in this paper and the vibrations caused by the impulsive forces induced by the impact of robot feet with the inclined surface are some of the very serious challenges encountered for achieving the above-mentioned *** overcome such challenges,an innovative method that uses a combination of the linearized equations of motion in the swing phase and the algebraic motion equations in the transition phase is presented in this paper to obtain an eigenvalue *** solving this problem,the suitable initial conditions that are necessary for the passive gait of this bipedal robot on a sloping surface are *** effects of the characteristic parameters of elastic links including the modulus of elasticity and the Kelvin-Voigt coefficient on the walking stability of this type of

关键词： bipedal robot flexible link swing phase transient phase eigenvalue problem Kelvin-Voigt coefficient

Holographic dark energy in non-conserved gravity theory

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第4期76卷 126-133页

作者： H r Fazlollahi Institute of Gravitation and Cosmology Peoples Friendship University of Russia(RUDN University)6 Miklukho-Maklaya StMoscow117198Russia

recently, reconsidering the rastall idea T_(μ;νν)^(v)=α_(,μ) through relativistic thermodynamics gives a new form for the scalar field α which led us to construct modern modified theory of gravity debugged ‘non-conserved gravity theory’ Fazlollahi 2023 Euro. Phys. J. C 83 923. This theory unlike other modified theories of gravity cannot directly explain the current acceleration expansion in the absence of the cosmological constant and or existence of other forms of dark energy. Hence, in this study we have reinvestigated holographic dark energy Ρ_(X)~H^(2) in the non-conserved theory of gravity. In this context, the density and pressure of dark energy depend on the non-conserved term and density of the dust matter field. As shown, due to non-conservation effects on large-scale structures, unlike the original holographic model, our model onsets an acceleration epoch for the current Universe satisfies observations. Moreover, the interaction and viscous scenarios are studied for this model.

关键词： non-conserved gravity covariant form of thermodynamics holographic dark energy

Investigating the impact of the universal function of the nuclear proximity potential in heavy-ion fusion cross sections

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第5期76卷 86-93页

作者： r Gharaei E Sarvari Department of Physics Sciences FacultyHakim Sabzevari UniversityPO Box 397SabzevarIran Department of Physics Faculty of ScienceFerdowsi University of MashhadPO Box 91775-1436MashhadIran Science Faculty Department of PhysicsTarbiat Modares UniversityTehranIran

The fusion barriers and cross sections of 15 colliding systems with 320≤Z_(1)Z_(2)≤1512 are investigated in detail to understand the influence of the universal function of proximity potential formalism in the heavy-ion fusion *** realize this goal,we select three versions of the phenomenological proximity potentials,including Prox.77,Zhang 2013,and Guo 2013,to calculate the nucleus-nucleus *** experimental fusion cross sections for the selected reactions are analyzed using the standard coupled-channel calculations,including couplings to the low-lying 2^(+)and 3^(-)states in the target and *** calculated results show that the universal functions of the Guo 2013 and Prox.77 models provide the lowest and highest fusion barriers,*** addition,it is found that the height of the fusion barriers is enhanced by increasing the mass number of the projectile from light to heavy *** highest sensitivity to the mass number of the projectile belongs to the results of Prox.77.A discussion is also presented on the influence of the universal function on the radial behavior of the interaction potential in the allowed region for overlapping *** results reveal that the best fit to the experimental data of the fusion cross sections for the reactions involving light and medium nuclei is obtained using the universal function of the Zhang 2013 *** the heavier systems,the results of the Guo 2013 model at sub-barrier energies provide a good description of the available data.

关键词： fusion reactions proximity-type potentials universal function coupled-channel calculations

Pile foundation in alternate layered liquefiable and non-liquefiable soil deposits subjected to earthquake loading

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 359-376页

作者： Praveen Huded M Suresh r Dash LEA Associates South East Asia Pvt.Ltd. New Delhi 110044India Indian Institute of Technology Bhubaneswar Khurda 752050India

Pile foundations are still the preferred foundation system for high-rise structures in earthquake-prone *** foundations have experienced failures in past earthquakes due to *** on pile foundations in liquefiable soils has primarily focused on the pile foundation behavior in two or three-layered soil ***,in natural occurrence,it may occur in alternative layers of liquefiable and non-liquefiable ***,the experimental and/or numerical studies on the layered effect on pile foundations have not been widely addressed in the *** of the design codes across the world do not explicitly mention the effect of sandwiched non-liquefiable soil layers on the pile *** the present study,the behavior of an end-bearing pile in layered liquefiable and non-liquefiable soil deposit is studied *** study found that the kinematic bending moment is higher and governs the design when the effect of the sandwiched non-liquefied layer is considered in the analysis as opposed to when its effect is ***,ignoring the effect of the sandwiched non-liquefied layer in a liquefiable soil deposit might be a nonconservative design approach.

关键词： pile foundation liquefaction alternately layered soil fixity effect layered effect

Effect of cylinder wall parameters on the final packing density of mono-disperse spheres subject to three-dimensional vibrations Author links open overlay panel

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 211-225页

作者： Jack r.Grogan Andrei L.Nicuşan Christopher r.K.Windows-Yule School of Chemical Engineering The University of BirminghamEdgbastonBirminghamB152TTUK

Achieving densely packed particles is desirable within the industries of ceramics,pharmaceuticals,defence and additive *** this work,we use the discrete element method(DEM)to determine the effect of wall parameters on the final packing density of mono-disperse spheres subject to 4 varying three-dimensional vibration and fill *** focus specifically on the impact of the container wall parameters on the particles'final packing *** on from the validation of the DEM simulation the particle-wall coefficient of restitution,the particle-wall coefficient of rolling friction and the particle-wall coefficient of sliding friction were varied individually and the effect on the final packing density *** relatively low particle-particle friction glass beads,the effect of these wall properties had no discernible effect on the final packing density *** on from these findings the particle-wall properties were varied at the extreme values of particle-particle coefficient of rolling friction and particle-particle coefficient of sliding *** a particle-particle coefficient of sliding friction=1,increases in particle-wall coefficient of restitution resulted in a minor increase in the final packing density of particles though this was not statistically *** a particle-particle coefficient of sliding friction=1,increases in particle-wall coefficient of rolling friction resulted in a minor decrease in the final packing density of the particles though again not to a degree where the trend can,with complete certainty,be distinguished from the random error across the ***,when the particle-particle coefficient of sliding friction=1,increases in particle-wall coefficient of sliding friction resulted in a significant decrease in the final packing density of *** decrease was attributed to the propagation of force chains throughout the *** significant decrease in final packing density with

关键词： Vibropacking Packing Densification Vibration Discrete element method Friction Wall friction restitution