检索结果-南通市图书馆

CO oxidation under lean and stoichiometric conditions over ceriazirconia with very low metal contents(Cu,Co,Ag and pt)

引用

Journal of Rare Earths 2024年第9期42卷 1669-1681,I0002页

作者： J.C.martínez-munuera m.p.Yeste A.García-García mCmA Group Department of Inorganic Chemistry and Institute of MaterialsUniversity of AlicanteCarretera de San Vicente del Raspeig s/n03690San Vicente del RaspeigAlicanteSpain Solid Chemistry and Catalysis Group Department of Materials ScienceMetallurgic Engineering and Inorganic ChemistryInstitute of Electronic Microscopy and Materials ResearchUniversity of CádizAp.40E-11510Puerto RealCádizSpain

In this work,several ceria-zirconia based catalysts with very lo w(and equimolar) metal contents were prepared,characterised and tested for the CO oxidatio n reaction(under lean and stoichiometric conditions),trying to emulate those conditions found in a diesel oxidation catalyst(DOC) system from a diesel engine and those encountered under gasoline exhaust(λ=1).The metals chosen are Cu,Co,Ag and pt(as a reliable benchmark).The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts,showing differences among dispersion(Ag-catalyst seems to present a low level of dispersion).This catalyst seems to be characterised,as well,by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H_(2)-TpR ***,the order in catalytic activity(Cu>Ag>Co≈pt>>support) seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions,yielding nearly overlapped CO oxidation catalytic *** restingly,a stro ng correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce_(0.8)Zr_(0.2)O_(2)-supported metal catalysts is ***,OSC parameter measured at 150℃ can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts,much better than the H_(2)-TpR measurements.

关键词： CO oxidation Low metal content Ceria-zirconia Copper species OSC parameter Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

引用

Journal of Rare Earths 2024年第10期42卷 1950-1959页

作者： p.a.m.rtínez-m.ntoya J.m.del Río A.de J.morales-Ramirez m.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.Lindavista Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.Lindavista Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/n

polymeric nanoparticles of poly(methyl methacrylate) were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-IR) and ultraviolet-visible(UV-Vis) *** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEm).The polymeric materials were used for recovery of [Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85% of [Eu] at pH of *** images of SEm after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50% of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of6.

关键词： Chelating effect Emulsion polymerization Extraction process Rare earths Stripping process [Eu]recovery

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Single atom Cu-N-C catalysts for the electro-reduction of CO_(2) to CO assessed by rotating ring-disc electrode

引用

Journal of Energy Chemistry 2024年第1期88卷 169-182,I0004页

作者： S.pérez-Rodríguez m.Gutiérrez-Roa C.Giménez-Rubio D.Ríos-Ruiz p.Arévalo-Cid m.V.martínez-Huerta A.Zitolo m.J.Lázaro D.Sebastián Instituto de Carboquímica(CSIC) Miguel Luesma Castán 450018 ZaragozaSpain Instituto de Catálisis y petroleoquímica(CSIC) Marie Curie 228049 MadridSpain Synchrotron SOLEIL L’Orme des MerisiersDépartementale 12891190France

The electrochemical CO_(2) reduction reaction(CO_(2)RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogendoped carbon xerogel(Cu-N-C) are successfully developed varying the copper amount and the nature of the copper precursor, for the efficient CO_(2)RR. The electrocatalytic performance of Cu-N-C materials is assessed by a rotating ring-disc electrode(RRDE), technique still rarely explored for CO_(2)RR. For comparison, products are also characterized by online gas chromatography in a H-cell. The as-synthesized Cu-NC catalysts are found to be active and highly CO selective at low overpotentials(from -0.6 to -0.8 V ***) in 0.1 m KHCO_(3), while H_(2) from the competitive water reduction appears at larger overpotentials(-0.9 V vs. RHE). The optimum copper acetate-derived catalyst containing Cu-N_(4) moieties exhibits a CO_(2)-to-CO turnover frequency of 997 h^(-1) at -0.9 V vs. RHE with a H_(2)/CO ratio of 1.8. These results demonstrate that RRDE configuration can be used as a feasible approach for identifying electrolysis products from CO_(2)RR.

关键词： Cu-N-C Carbon xerogel Rotating ring disc electrode Carbon dioxide reduction reaction Carbon monoxide

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of cerium ions on structure-dependent magnetic properties of Ba-Sr m-type hexaferrite nanocrystals

引用

Journal of Rare Earths 2024年第2期42卷 364-372,I0005页

作者： Ram A.pawar Sunil m.patange p.m.Dighe Sher Singh meena Abdullah GAl-Sehemi mehboobali pannipara Santosh S.Jadhav Department of physics ArtsCommerce and Science CollegeAhmednagar413711MaharashtraIndia Department of physics Shri Krishna MahavidyalayaGunjotiDistOsmanabad413606MaharashtraIndia padmashri Vikhe patil College of Arts Science and CommercePravaranagarA/P.Loni(Kd)Tal.RahataDistAhmednagar413713MaharashtraIndia Solid State physics Division Bhabha Atomic Research CentreMumbai400085MaharashtraIndia Department of Chemistry King Khalid UniversityAbha61413Saudi Arabia Department of physics D.S.M's ArtsCommerce and Science CollegeJintur431509MaharashtraIndia

The present study is a systematic effort to investigate the structure-sensitive magnetic parameters of Ce^(3+) substituted Ba-Sr hexaferrite nanocrystals chemically formulated as Ba_(0.5)Sr_(0.5)Ce_(x)Fe_(12-x)O_(19) where x=0.0-0.2 with Δx=*** hexaferrite powders were prepared using the sol-gel self-ignition route and structurally characterized by means of powder X-ray diffraction and Fourier transform infrared *** creation of the m-type hexaferrite phase within the synthesized samples was revealed from the Rietveld refinement of the X-ray *** occurrence of a secondary phase of CeO_(2) was revealed within the hexaferrites for the substitution,x> *** refined X-ray diffraction data were utilized to compute the lattice parameters,X-ray density,and lattice parameter *** crystal structure plotted from the refined XRD data reveals the occupancy of the ions at different lattice *** XpS data of the hexaferrite were analyzed to confirm the oxidation states of the constituent *** nanocrystalline nature of the hexaferrites was revealed from the crystallite sizes calculated using Scherer's *** analysis of FTIR spectra confirms that only a fraction of Ce^(3+)accommodated in the lattice and the remaining Ce content reside in the form of the CeO_(2) *** morphology of the hexaferrites was analyzed from the FESEm profiles of the ferrite *** magnetic behavior study was performed by analyzing the Curie temperature,hysteresis loops,and hyperfine interactions by means of susceptibility,V.S.m,and mossbauer spectroscopy,*** hexaferrites with increasing coercivity,decreasing saturation magnetization,and decreasing Curie temperature are reported in the *** substituted Ce^(3+)ions inhibit the grain growth and create lattice imperfections giving rise to hexaferrites with tuned magnetic parameters suitable for different applications.

关键词： Ba-Sr hexaferrite Ce^(3+)substitution XpS Saturation magnetization Coercivity m?ssbauer spectroscopy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

predicting grain size-dependent superplastic properties in friction stir processed ZK30 magnesium alloy with machine learning methods

引用

Journal of magnesium and Alloys 2024年第5期12卷 1931-1943页

作者： Farid Bahari-Sambran Fernando Carreno C.m.Cepeda-Jiménez Alberto Orozco-Caballero physical metallurgy Department CENIM-CSICAv.Gregorio del Amo 828040 MadridSpain Department of mechanical Engineering Chemistry and Industrial DesignPolytechnic University of MadridRonda de Valencia 328012MadridSpain

The aim of this work is to predict,for the first time,the high temperature flow stress dependency with the grain size and the underlaid deformation mechanism using two machine learning models,random forest(RF)and artificial neural network(ANN).With that purpose,a ZK30 magnesium alloy was friction stir processed(FSp)using three different severe conditions to obtain fine grain microstructures(with average grain sizes between 2 and 3μm)prone to extensive superplastic *** three friction stir processed samples clearly deformed by grain boundary sliding(GBS)deformation mechanism at high *** maximum elongations to failure,well over 400% at high strain rate of 10^(-2)s^(-1),were reached at 400℃ in the material with coarsest grain size of 2.8μm,and at 300℃ for the finest grain size of 2μ***,the superplastic response decreased at 350℃ and 400℃ due to thermal instabilities and grain coarsening,which makes it difficult to assess the operative deformation mechanism at such *** work highlights that the machine learning models considered,especially the ANN model with higher accuracy in predicting flow stress values,allow determining adequately the superplastic creep behavior including other possible grain size scenarios.

关键词： machine learning Artificial intelligence magnesium alloys Superplasticity Friction stir processing Grain coarsening

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Solid-liquid extraction for yttrium recovery using porous polymeric resin(XAD-7) functionalized with D_(2)EHpA

引用

Journal of Rare Earths 2024年第9期42卷 1764-1773,I0005页

作者： p.a.m.rtínez-m.ntoya R.G.Sanchez-Alvarado D.Y.medina-Velazquez m.L.Carrera-Jota p.Garnica-Chávez A.de J.morales-Ramirez Higher School of Chemical Engineering and Extractive Industries ESIQIEIPNDepartment of Metallurgical EngineeringUPALM S/NCol.LindavistaGustavo A.Madero Cd.de MéxicoC.P07738Mexico metropolitan Autonomous University Department of MaterialsBasic Sciences and EngineeringAv.San Pablo No.180Col.Reynosa TamaulipasCd.de MéxicoC.P02200Mexico Center for Research and Technological Innovation CIITECIPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P02250CDMXMexico

The recovery of yttrium is proposed by applying a solid-liquid extraction process using di-2-ethyl hexylphosphoric acid(D2EHpA) as extracting *** extracting agents were supported on a macro porous polymeric resin XAD-7(solid phase).Yttrium ions extraction and discharge tests were performed,firstly from a synthetic aqueous solution of 100 mg/L Y(liquid phase) at 25℃ with *** effects of pH of aqueous solutions bearing yttrium,volume fraction of extracting agents and the solid/liquid(S/L)ratio on the yttrium recovery were *** most favorable conditions for yttrium ions extraction are;20 vol% D_(2)EHpA functionalized resin,pH=1.5 and an S/L ratio of 10 mg/mL The discharge of yttrium ions was done under the same conditions of extraction stage,using a 2 mol/L [H_(2)SO_(4)] as stripping *** to 80% yttrium is extracted,while 75% yttrium is recovered in the striping *** all experiments,the reaction equilibrium is reached after 20 min,and the kinetics for the extraction stage was determined as a second-order ***,experiments were carried out to discharge the yttriumloaded resins,and it has been determined that the best pH value to strip the Y ions is *** tests of extraction and discharge for yttrium ions show that the functionalized resin can work at least five cycles without decreasing its ***,the proposed process was tested in a real solution with Y ions fro m a waste fluorescent la mp powder leached in H_(2)SO_(4),demonstrating the ability to effectively recover yttrium,separating it from various metals from the studied residue.

关键词： Yttrium recovery Rare earth solid-liquid extraction XAD-7 resin Fluorescent lamps recycling Solid-liquid kinetics extraction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

BaTiO3 solid solutions co-doped with Gd3+ and Eu3+:Synthesis,structural evolution and dielectric properties

引用

Journal of Rare Earths 2024年第10期42卷 1920-1926页

作者： R.martínez-López m.pérez-Labra J.A.Romero-Serrano F.R.Barrientos-Hernández m.Reyes-pérez m.I.Valenzuela-Carrillo G.Urbano-Reyes V.E.Reyes-Cruz G.I.Dávila-pulido Academic Area of Earth Sciences and materials Autonomous University of Hidalgo State metallurgy and materials Department ESIQIE-IPNUPALM Autonomous University of Coahuila Boulevard Adolfo López Mateos S/n

In this paper,the synthesis,structural evolution,and dielectric properties of BaTiO3solid solutions codoped with rare earth elements(Gd3+and Eu3+) prepared using the solid-state reaction method are *** pure precursor powders of BaCl3,TiO2,Gd2O3,and Eu2O3were mixed in stoichiometric proportions,ground in an agate mortar before being uniaxially pressed at 250 mpa and sintered at 1300℃ in air atmosphere for 6 h to obtain Ba1-3xGd2xTi1-3xEu4xO3（x=0,0.0015,0.01 and0.1）.X-ray diffraction（XRD） and Rietveld's refinement results reveal the crystal phase ferroelectric tetragonal BaTiO3for the samples with x=0,0.0015 and 0.01, as well as a consistent increment in the lattice parameters caused by the *** solubility limit of Gd3+and Eu3+in the BaTiO3structure is reached for the sample with x>0.01,and the orthorhombic Eu2TiO5and monoclinic BaTi2O5secondary phases were *** Raman results show the characteristic peaks of ferroelectric tetragonal BaTiO3around 716 cm-1（LO of A1 symmetry）,515 cm-1（TO of A1 symmetry）,and 305 cm-1（B1）.The maximum relative permittivity measured at 1 kHz was recorded to be 6151.8 for the sample with x=0.0015,and a decrease in the Curie temperature to 105℃ with respect to the undoped sample was *** punctual microanalysis for the samples with x=0.0015,0.01,and 0.1 reveals grains composed of Ba,Ti,O,Gd,and Eu homogeneously distributed in the *** Ba/Ti ratios for samples with x=0.0015,0.01 and 0.1 are 2.86,2.91,and 0.68,respectively,indicating substitution at the Ti site for samples with x=0.0015 and 0.01 and a substitution at the Ba site for the sample with x=0.1.

关键词： BaTiO3 Doping Europium Gadolinium Rare earths Synthesis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

引用

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.p.SALAImANImAGUDAm J.JAYApRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Tutorial on Federated Learning from Theory to practice:Foundations,Software Frameworks,Exemplary Use Cases,and Selected Trends

引用

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 824-850页

作者： m.Victoria Luzón Nuria Rodríguez-Barroso Alberto Argente-Garrido Daniel Jiménez-López Jose m.moyano Javier Del Ser Weiping Ding Francisco Herrera Department of Software Engineering Andalusian Research Institute in Data Science and Computational Intelligence(DaSCI)University of GranadaGranada 18071Spain Department of Computer Science and Artificial Intelligence Andalusian Research Institute in Data Science and Computational Intelligence(DaSCI)University of GranadaGranada 18071Spain Department of Communications Engineering University of the Basque Country(UPV/EHU)and also with TECNALIABasque Research&Technology Alliance(BRTA)Spain School of Information Science and Technology Nantong UniversityNantong 226019China

When data privacy is imposed as a necessity,Federated learning(FL)emerges as a relevant artificial intelligence field for developing machine learning(mL)models in a distributed and decentralized *** allows mL models to be trained on local devices without any need for centralized data transfer,thereby reducing both the exposure of sensitive data and the possibility of data interception by malicious third *** paradigm has gained momentum in the last few years,spurred by the plethora of real-world applications that have leveraged its ability to improve the efficiency of distributed learning and to accommodate numerous participants with their data *** virtue of FL,models can be learned from all such distributed data sources while preserving data *** aim of this paper is to provide a practical tutorial on FL,including a short methodology and a systematic analysis of existing software ***,our tutorial provides exemplary cases of study from three complementary perspectives:i)Foundations of FL,describing the main components of FL,from key elements to FL categories;ii)Implementation guidelines and exemplary cases of study,by systematically examining the functionalities provided by existing software frameworks for FL deployment,devising a methodology to design a FL scenario,and providing exemplary cases of study with source code for different mL approaches;and iii)Trends,shortly reviewing a non-exhaustive list of research directions that are under active investigation in the current FL *** ultimate purpose of this work is to establish itself as a referential work for researchers,developers,and data scientists willing to explore the capabilities of FL in practical applications.

关键词： Data privacy distributed machine learning federated learning software frameworks

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

引用

aBIOTECH 2024年第2期5卷 239-246页

作者： J.m.Lukasiewicz C.C.m.van de Wiel L.A.p.Lotz m.J.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques Consumer transparency plant products

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：