检索结果-南通市图书馆

Bulging Distortion of Austenitic Stainless Steel Sheet on the Partially Penetrated Side of Non-Penetration Lap Laser Welding Joint

引用

Chinese Journal of Mechanical Engineering 2024年第1期37卷 286-295页

作者： Chengwu yao Enze Liu Jiaming ni Binying nie Shanghai Key Laboratory of Materials Laser Processing and Modification School of Material Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240China Shanghai Aerospace Precision Machinery Institute Shanghai 201600China Chemical and Biological Engineering College Yichun UniversityYichun 336000China

Non-penetration laser welding of lap joints in austenitic stainless steel sheets is commonly preferred in fields where the surface quality is of utmost importance.However,the application of non-penetration welded austenitic stainless steel parts is limited owing to the micro bulging distortion that occurs on the back surface of the partial penetration side.In this paper,non-penetration lap laser welding experiments,were conducted on galvanized and SUS304 austenitic stainless steel plates using a fiber laser,to investigate the mechanism of bulging distortion.A comparative experiment of DC01 galvanized steel-Q235 carbon steel lap laser welding was carried out,and the deflection and distortion profile of partially penetrated side of the sheets were measured using a noncontact laser interferometer.In addition,the cold-rolled SUS304 was subjected to heat holding at different temperatures and water quenching after bending to characterize its microstructure under tensile and compressive stress.The results show that,during the heating stage of the thermal cycle of laser lap welding,the partial penetration side of the SUS304 steel sheet generates compressive stress,which extrudes the material in the heat-affected zone to the outside of the back of the SUS304 steel sheet,thereby forming a bulge.The findings of these experiments can be of great value for controlling the distortion of the partial penetrated side of austenitic stainless steel sheet during laser non-penetration lap welding.

关键词： Non-penetration lap laser welding Bulging distortion Austenitic stainless steel Compressive stress Tension stress

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Impact of frailty on short-term postoperative outcomes in patients undergoing colorectal cancer surgery:A systematic review and meta-analysis

引用

World Journal of Gastrointestinal Surgery 2024年第3期16卷 893-906页

作者： yao Zhou Xiao-Lei Zhang Hong-Xia ni Tian-Jing Shao Ping Wang Department of Operating Room Affiliated Tumor Hospital of Nantong University&Nantong Tumor HospitalNantong 226361Jiangsu ProvinceChina Department of Gastrointestinal Surgery The Affiliated Tumor Hospital of Nantong University&Nantong Tumor HospitalNantong 226361Jiangsu ProvinceChina

BACKGROUND Colorectal cancer is a major global health challenge that predominantly affects older people.Surgical management,despite advancements,requires careful consideration of preoperative patient status for optimal outcomes.AIM To summarize existing evidence on the association of frailty with short-term postoperative outcomes in patients undergoing colorectal cancer surgery.METHODS A literature search was conducted using PubMed,EMBASE and Scopus databases for observational studies in adult patients aged≥18 years undergoing planned or elective colorectal surgery for primary carcinoma and/or secondary metastasis.Only studies that conducted frailty assessment using recognized frailty assess-ment tools and had a comparator group,comprising nonfrail patients,were included.Pooled effect sizes were reported as weighted mean difference or relative risk(RR)with 95%confidence intervals(CIs).RESULTS A total of 24 studies were included.Compared with nonfrail patients,frailty was associated with an increased risk of mortality at 30 d(RR:1.99,95%CI:1.47-2.69),at 90 d(RR:4.76,95%CI:1.56-14.6)and at 1 year(RR:5.73,95%CI:2.74-12.0)of follow up.Frail patients had an increased risk of any complications(RR:1.81,95%CI:1.57-2.10)as well as major complications(Clavien-Dindo classification grade≥III)(RR:2.87,95%CI:1.65-4.99)compared with the control group.The risk of reoperation(RR:1.18,95%CI:1.07-1.31),readmission(RR:1.70,95%CI:1.36-2.12),need for blood transfusion(RR:1.67,95%CI:1.52-1.85),wound complications(RR:1.49,95%CI:1.11-1.99),delirium(RR:4.60,95%CI:2.31-9.16),risk of prolonged hospitalization(RR:2.09,95%CI:1.22-3.60)and discharge to a skilled nursing facility or rehabilitation center(RR:3.19,95%CI:2.0-5.08)was all higher in frail patients.CONCLUSION Frailty in colorectal cancer surgery patients was associated with more complications,longer hospital stays,higher reoperation risk,and increased mortality.Integrating frailty assessment appears crucial for tailored surgical management.

关键词： Frailty Frail adults Colorectal surgery Colorectal cancer Complications Mortality Survival Slinical outcomes Meta-analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Production of Functional Materials Derived from Regenerated Silk Fibroin by Utilizing 3D Printing and Biomimetic Enzyme-induced Mineralization

引用

Chinese Journal of Polymer Science 2024年第3期42卷 299-310,I0005页

作者： ni Chen Fei-Yu Luo Gong-Wen Yang Jin-Rong yao Xin Chen Zheng-Zhong Shao State Key Laboratory of Molecular Engineering of Polymers Laboratory of Advanced Materials and Department of Macromolecular ScienceFudan UniversityShanghai 200433China

Critical-sized bone defects, commonly encountered in clinical orthopedic surgery, present a significant challenge. One of the promising solutions is to prepare synthetic bone substitute materials with precise structural control, mechanical compatibility, and enhanced osteogenic induction performance, nevertheless the successful preparation of such materials remains difficult. In this study, a two-step technique,integrating an extrusion-based printing process with biomimetic mineralization induced by alkaline phosphatase(ALP), was developed. Initially,a pre-cured hydrogel of regenerated silk fibroin(RSF) with a small quantity of hydroxypropyl cellulose(HPC) and ALP was prepared through heating the mixed aqueous solution. This pre-cured hydrogel demonstrated thixotropic property and could be directly extruded into predetermined structures through a 3D-printer. Subsequently, the 3D-printed RSF-based materials with ALP underwent biomimetic in situ mineralization in calcium glycerophosphate(Ca-GP) mineralizing solution, utilizing the polymer chains of RSF as templates and ALP as a trigger for cleaving phosphate bonds of Ca-GP. The resulting 3D-printed RSF-mineral composites including hydrogel and sponge possessed adjustable compression modulus of megapascal grade and variable hydroxyapatite content, which could be controlled by manipulating the duration of the mineralization process.Moreover, these 3D-printed RSF-mineral composites demonstrated non-cytotoxicity towards rat bone marrow mesenchymal stem cells. Therefore, they may hold great potential for applications involving the replacement of tissues characterized by osteoinductivity and intricate structures.

关键词： Silk protein Alkaline phosphatase Extrusion-based printing Biomineralization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparison of different versions of the quick sequential organ failure assessment for predicting in-hospital mortality of sepsis patients:A retrospective observational study

引用

World Journal of Emergency Medicine 2022年第2期13卷 114-119页

作者： Hai Hu Jing-yuan Jiang ni yao Emergency Office of West China Hospital Sichuan UniversityChengdu 610041China China International Emergency Medical Team Chengdu 610041China Emergency Department West China HospitalSichuan UniversityChengdu 610041China West China School of Nursing Sichuan UniversityChengdu 610041China Department of Critical Care Medicine West China HospitalSichuan UniversityChengdu 610041China

BACKGROUND:The quick sequential organ failure assessment(qSOFA)is recommended to identify sepsis and predict sepsis mortality.However,some studies have recently shown its poor performance in sepsis mortality prediction.To enhance its effectiveness,researchers have developed various revised versions of the qSOFA by adding other parameters,such as the lactate-enhanced qSOFA(LqSOFA),the procalcitonin-enhanced qSOFA(PqSOFA),and the modified qSOFA(MqSOFA).This study aimed to compare the performance of these versions of the qSOFA in predicting sepsis mortality in the emergency department(ED).METHODS:This retrospective study analyzed data obtained from an electronic register system of adult patients with sepsis between January 1 and December 31,2019.Receiver operating characteristic(ROC)curve analyses were performed to determine the area under the curve(AUC),with sensitivity,specificity,and positive and negative predictive values calculated for the various scores.RESULTS:Among the 936 enrolled cases,there were 835 survivors and 101 deaths.The AUCs of the LqSOFA,MqSOFA,PqSOFA,and qSOFA were 0.740,0.731,0.712,and 0.705,respectively.The sensitivity of the LqSOFA,MqSOFA,PqSOFA,and qSOFA were 64.36%,51.40%,71.29%,and 39.60%,respectively.The specificity of the four scores were 70.78%,80.96%,61.68%,and 91.62%,respectively.The LqSOFA and MqSOFA were superior to the qSOFA in predicting in-hospital mortality.CONCLUSIONS:Among patients with sepsis in the ED,the performance of the PqSOFA was similar to that of the qSOFA and the values of the LqSOFA and MqSOFA in predicting in-hospital mortality were greater compared to qSOFA.As the added parameter of the MqSOFA was more convenient compared to the LqSOFA,the MqSOFA could be used as a candidate for the revised qSOFA to increase the performance of the early prediction of sepsis mortality.

关键词： Quick sequential organ failure assessment In-hospital mortality Sepsis Lactate-enhanced qSOFA Modified qSOFA

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

引用

World Journal of Emergency Medicine 2022年第6期13卷 425-432页

作者： Hai Hu ni yao Xiao-qin Lai Emergency Management Office of West China Hospital Sichuan UniversityChengdu 610041China China International Emergency Medical Team Chengdu 610041China Sichuan University’s Emergency Medical Rescue Base Chengdu 610041China Department of Critical Care Medicine West China HospitalSichuan UniversityChengdu 610041China Day Surgery Center West China HospitalSichuan UniversityChengdu 610041China West China School of Nursing Sichuan UniversityChengdu 610041China

BACKGROUND:There is limited evidence for emergency physicians and emergency trauma surgeons regarding the determinants of early and rapid assessment of older adult in-hospital mortality due to earthquakes.This study explored factors related to the early and rapid assessment of the mortality among older adult earthquake trauma patients(OAETPs)and created a screening model.METHODS:Data on 7,308 OAETPs from the West China Earthquake Patients Database were analyzed retrospectively.The 35 variables that can be obtained rapidly on arrival at the hospital were collected.Least absolute shrinkage and selection operator(LASSO)regression analysis was performed.Then,the nomogram for assessing the mortality of OAETPs was constructed.RESULTS:We identified 10 independent mortality-related factors that contributed to the in-hospital mortality of OAETPs.The 10 factors included age(odds ratio[OR]=1.061,95%confidence interval[CI]:1.031-1.090),dementia(OR=5.146,95%CI:1.169-17.856),coronary heart disease(CHD;OR=23.441,95%CI:4.799-83.927),malignant tumor(OR=8.497,95%CI:3.583-17.967),deep vein thrombosis(DVT;OR=7.110,95%CI:1.369-27.168),chronic kidney disease(CKD;OR=11.783,95%CI:5.419-24.407),pulse rate(PR;OR=1.036,95%CI:1.022-1.048),mean artery pressure(MAP;OR=0.960,95%CI:0.945-0.975),Glasgow Coma Scale(GCS;OR=0.864,95%CI:0.760-0.972),and Triage Revised Trauma Score(T-RTS,OR=0.485,95%CI:0.351-0.696).CONCLUSION:The 10 mortality-related factors could be quickly obtained on hospital arrival and should be the focal point of future earthquake response strategies regarding hospitalized older adults with trauma.A nomogram was constructed based on the factors for screening OAETPs with a higher risk of in-hospital mortality.

关键词： Trauma Mortality Earthquakes Elderly patients

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A neuromorphic device mimicking synaptic plasticity under different body fluid K^(+) homeostasis for artificial reflex path construction and pattern recognition

引用

Fundamental Research 2024年第2期4卷 353-361页

作者： Lu Yang yao ni Chengpeng Jiang Lu Liu Song Zhang Jiaqi Liu Lin Sun Wentao Xu Institute of Photoelectronic Thin Film Devices and Technology Key Laboratory of Optoelectronic Thin Film Devices and Technology of TianjinEngineering Research Center of Thin Film Photoelectronic TechnologyMinistry of EducationNankai UniversityTianjin 300350China Shenzhen Research Institute of Nankai University Shenzhen 518000China

The ionic environment of body fluids influences nervous functions for maintaining homeostasis in organisms and ensures normal perceptual abilities and reflex activities.Neural reflex activities,such as limb movements,are closely associated with potassium ions(K+).In this study,we developed artificial synaptic devices based on ion concentration-adjustable gels for emulating various synaptic plasticities under different K+concentrations in body fluids.In addition to performing essential synaptic functions,potential applications in information processing and associative learning using short-and long-term plasticity realized using ion concentration-adjustable gels are presented.Artificial synaptic devices can be used for constructing an artificial neural pathway that controls artificial muscle reflex activities and can be used for image pattern recognition.All tests show a strong relationship with ion homeostasis.These devices could be applied to neuromorphic robots and human-machine interfaces.

关键词： Nervous regulation Artificial synaptic device Ion gel Ion homeostasis Artificial reflex pathway

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Status and progress of metal-supported solid oxide fuel cell: Towards large-scale manufactory and practical applications

引用

Energy Reviews 2024年第1期3卷 1-23页

作者： Haoran Xu Yu Han Jing Zhu Meng ni Zhen yao State Key Laboratory of Clean Energy Utilization Zhejiang University38 Zheda RoadHangzhou310027China Department of Building and Real Estate Research Institute for Sustainable Urban Development(RISUD)&Research Institute for Smart Energy(RISE)Hong Kong Polytechnic UniversityHung HomKowloonHong KongChina Fakultät für Physik Universität BielefeldUniversitätsstr.2533615BielefeldGermany

Metal-supported solid oxide fuel cells(MS-SOFCs)own advantages of high performance,fast start-up,thermal cycle stability,easy sealing,and reduced material cost.In recent years,significant progress has been made in the development of MS-SOFCs,particularly with respect to improved electrochemical performance,long-term stability,and industrial production.Previous studies have mainly focused on stainless steel-based MS-SOFCs,with an emphasis on the development of low-temperature preparation processes,antioxidant coatings,stable electrodes,and the direct utilization of hydrocarbon fuels.Notably,Ceres Power and GE have successfully commercialized MS-SOFCs and have constant cooperated with several institutions and companies,such as Jülich Research Center,Weichai and Cummins,to promote the performance and expand the market of MS-SOFC.Looking ahead,this review paper provides an outlook on future research directions in this rapidly evolving field.

关键词： Metal support Solid oxide fuel cell High performance Long-term stability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Highly dispersive tetrahedral vanadium species on pure silica ZSM-12 zeolite boosting the selective oxidation of cyclohexane into cyclohexanone

引用

Science China Chemistry 2024年第7期67卷 2206-2214页

作者： Menglin Xie Ting Li Chao Wu Xiaoling Liu Jinling ni Siqin yao Yu Zhou Shibo Xi Jun Wang State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical EngineeringNanjing Tech UniversityNanjing 211816China Institute of Sustainability for Chemicals Energy and Environment(ISCE2)Agency for ScienceTechnology and Research(A*STAR)Singapore 627833Republic of Singapore College of Materials Science and Engineering Sichuan UniversityChengdu 610065China

The selective oxidation of cyclohexane is a promising green route for the production of KA oil(cyclohexanol and cyclohexanone),but remains a huge challenge to design high-performing heterogeneous catalysts under mild conditions.Herein,a pure silica ZSM-12(MTW topology)zeolite was applied as the support to immobilize highly dispersive tetrahedrally coordinated vanadium(V)species and the constructed catalyst 1%V/SZ-12 exhibited high efficiency in the fast and selective oxidation of cyclohexane into cyclohexanone with H2O2.The reaction completed within 30 s,affording the selectivity of 99%towards cyclohexanone and the extremely high turnover frequency(TOF)of 5,891 h^(-1).1%V/SZ-12 was facilely reused with stable activity and feasibly extended to the oxidation of various cyclohexane derivatives.The one-dimensional 12-membered ring microchannels contributed to the formation and accessibility of tetrahedrally coordinated high valent V5+species as the robust active centers,which activated H2O2to generate V–O–O·,the active oxygen species for the electrophilic attack on cyclohexane to produce cyclohexanone as the sole product.

关键词： zeolite metal doping cyclohexane oxidation heterogeneous catalysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Upper-Bound Limit Analysis of the Multi-Layer Slope Stability and Failure Mode Based on Generalized Horizontal Slice Method

引用

Journal of Earth Science 2024年第3期35卷 929-940页

作者： Huawei Zhang Changdong Li Wenqiang Chen ni Xie Guihua Wang Wenmin yao Xihui Jiang Jingjing Long Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources Changjiang River Scientific Research InstituteWuhan 430010China Faculty of Engineering China University of GeosciencesWuhan 430074China Badong National Observation and Research Station of Geohazards China University of GeosciencesWuhan 430074China School of Civil Engineering Zhengzhou UniversityZhengzhou 450001China

Multi-layer slopes are widely found in clay residue receiving fields.A generalized horizontal slice method(GHSM)for assessing the stability of multi-layer slopes that considers the energy dissipation between adjacent horizontal slices is presented.In view of the upper-bound limit analysis theory,the energy equation is derived and the ultimate failure mode is generated by comparing the sliding surface passing through the slope toe(mode A)with that below(mode B).In addition,the influence of the number of slices on the stability coefficients in the GHSM is studied and the stable value is obtained.Compared to the original method(Chen’s method),the GHSM can acquire more precise results,which takes into account the energy dissipation in the inner sliding soil mass.Moreover,the GHSM,limit equilibrium method(LEM)and numerical simulation method(NSM)are applied to analyze the stability of a multi-layer slope with different slope angles and the results of the safety factor and failure mode are very close in each case.The ultimate failure modes are shown to be mode B when the slope angle is not more than 28°.It illustrates that the determination of the ultimate sliding surface requires comparison of multiple failure modes,not only mode A.

关键词： stability and failure mode slope stability generalized horizontal slice method upperbound limit analysis energy dissipation geotechnical engineering.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Genetically Predicted Plasma Levels of Amino Acids and Endometriosis:A Mendelian Randomization Study

引用

Biomedical and Environmental Sciences 2024年第6期37卷 672-675页

作者： Juanmei Li yao ni ning Wang Yu Liao Yiwei Yu Wenliang Lyu Ruihua Zhao Guang’anmen Hospital China Academy of Chinese Medical SciencesBeijing 100053China Department of Dermatovenereology Chengdu Second People’s HospitalChengdu 610021SichuanChina

Endometriosis(EMS)is one of the most common disorders among women of reproductive age and affects approximately 6%–10%of the world total population^([1]).Women with EMS often experience symptoms such as dysmenorrhea,infertility,or difficulties in conceiving.Recent studies focusing on amino acids(AAs)metabolism have shed light on the mechanisms underlying the development and progression of EMS^([2]).

关键词： metabolism infertility Plasma

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：