检索结果-南通市图书馆

Chinese Journal of Chemical Engineering 2018年第1期26卷 152-158页

作者： Kazem Motahari mohammad Abdollahi moghaddam Mojtaba Moradian Department of Chemical Engineering Faculty of EngineeringArak UniversityArak 38156-8-8349Iron Young Researchers and Elite Club Malayer BranchIslamic Azad UniversityMalayerIran

In current research, MWCNT-SiO2/oil hybrid nano-lubricant viscosity is experimentally examined. By dispersing 0.05%, 0.1%, 0.2%, 0.4%, 0.8% and 1% volume of MWCNTs and SiO2 nanopartide into the engine oil SAE 20W50, the temperature and solid volume fraction consequences were studied. At 40 to 100 ℃ temperature, the viscosities were assessed. The results indicated Newtonian behavior for the hybrid nano-lubricant. Moreover, solid volume fraction augmentation and temperature enhanced the viscosity enhancement of hybrid nano-lubricant. At highest solid volume fraction and temperature, nano-lubricant viscosity was 171% greater compared to pure 20W50. Existed models lack the ability to predict the hybrid nano-lubricant viscosity. Thus, a new correlation regarding solid volume fraction and temperature was suggested with R-squared of 0.9943.

关键词： Hybrid nano-lubricant Dynamic viscosity Temperature Solid volume fraction New correlation

Genetic and Genotype × Environment Interaction Effects for Appearance Quality of Rice

在线全文

学校读者我要写书评

暂无评论

Agricultural Sciences in China 2009年第8期8卷 891-901页

作者： Sharifi Peyman Dehghani Hamid Mumeni Ali moghaddam mohammad Department of Plant Breeding Faculty of Agriculture Tarbiat Modares University Rice Research Institute of Iran (RRII) Department of Agronomy and Plant Breeding Faculty of Agriculture Tabriz University

This study was conducted to generate genetic information in rice varieties based on a complete diallel crosses over two years. The results indicated that genotype effect was significant for all traits. Genotype × environment interaction effects were significant only for cooked grain length （CGL） and cooked grain shape （CGSH）. General combining ability （GCA） and specific combining ability （SCA） effects were significant for entire traits, which indicated the important roles of both additive and non-additive gene actions. GCA x environment interaction effects were significant for CGL, CGSH and grain elongation index （GEI）. In the controlling of the inheritance of milled grain shape （GSH）, milled grain width （MGW）, GEI, milled grain length （MGL）, CGSH and cooked grain width （CGW）, the additive gene effects were more important than non-additive one. The average degree of dominance was within the range of partial dominance for all of the traits. The narrow-sense heritability was ranged from 0.65 （GSH） to 0.36 （CGL）. GCA effects were significant for all of the parents in milled grain length and it was significant for some of the parents in other traits. The crosses of Deilmani × IRFAON-215 exhibited significant SCA for GEI. The positive mean of heterosis was observed for CGW. The highest maximum values of heterosis were revealed in GEI, flowed by GSH, MGW and CGW. GCA and MPV were significantly and positively correlated together for all traits.

关键词： appearance quality diallel analysis genetic main effects environment interaction milling quality rice

An analytical model for pyrolysis of a single biomass particle

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2015年第1期22卷 350-359页

作者： Mehdi Bidabadi mohammad Rastegar moghaddam Seyed Alireza Mostafavi Farzad Faraji Dizaji Hossein Beidaghy Dizaji School of Mechanical Engineering Department of Energy Conversion Combustion Research LaboratoryIran University of Science and Technology Department of Mechanical Engineering Faculty of Engineering Arak University School of Engineering the University of Vermont 33 Colchecter Avenue Young Researchers and Elite Club Tabriz Branch Islamic Azad University

Decreasing in emissions of greenhouse gases to confront the global warming needs to replace fossil fuels as the main doer of the world climate changes by renewable and clean fuels produced from biomass like wood waste which is neutral on the amount of CO2. An analytical and engineering model for pyrolysis process of a single biomass particle has been presented. Using a two-stage semi global kinetic model which includes both primary and secondary reactions, the effects of parameters like shape and size of particle as well as porosity on the particle temperature profile and product yields have been investigated. Comparison of the obtained results with experimental data shows that our results are in a reasonable agreement with previous researchers' works. Finally, a sensitivity analysis is done to determine the importance of each parameter on pyrolysis of a single biomass particle which is affected by many constant parameters.

关键词： biomass pyrolysis analytical model single particle sensitivity analysis

Validation of EST-derived STS markers localized on ***-3BS for Fusarium head blight resistance in wheat using a‘Wangshuibai’derived population

在线全文

学校读者我要写书评

暂无评论

Journal of Genetics and Genomics 2008年第10期35卷 625-629页

作者： Amir mohammad Naji mohammad moghaddam mohammad Reza Ghaffari Hashem Pour Irandoost Laleh Karimi Farsad Seyed Mostafa Pirseyedi Seyed Abolghasem mohammadi Behzad Ghareyazie Mohsen Mardi Department of Agronomy and Crop Breeding Shahed University of Tehran Department of Agronomy and Plant Breeding University of Tabriz Department of Genomics Agricultural Biotechnology Research Institute of Iran

A few EST-derived STS markers localized on ***-3BS, a major QTL for resistance to Fusarium head blight （FHB） in wheat, have been previously identified in the ＇Sumai 3＇/＇Stoa＇ population. In this study, we used a ＇Wangshuibai＇（resistant）/＇Seri82＇（susceptible） derived population, linkage group, QTL, and quantitative gene expression analysis to assess the genetic background dependence and stability of the EST-derived STS markers for use in marker aided selection to improve FHB resistance in wheat. Based on our results, a QTL in the map interval of Xsts3B-138_1-Xgwrn493 on chromosome 3BS was detected for FHB resistance, which accounted for up to 16% of the phenotypic variation. BLASTN analysis indicated that Xsts3B-138_1 sequence had significant similarity with the resistance gene analogue. Real-time quantitative PCR showed that the relative expression of Xsts3B-138_1 in ＇Wangshuibai＇ at 96 h after inoculation was 2.6 times higher than ＇Seri82＇. Our results underlined that EST-derived STS3B-138 markers could be predominantly used in marker aided selection to improve FHB resistance in wheat.

关键词： EST-derived STS markers Qfhs.ndsu-3BS Fusarium head blight wheat

Occult hepatitis C virus infection in the Middle East and Eastern Mediterranean countries:A systematic review and meta-analysis

在线全文

学校读者我要写书评

暂无评论

World Journal of Hepatology 2021年第2期13卷 242-260页

作者： mohammad Reza Hedayati-moghaddam Hossein Soltanian Sanaz Ahmadi-Ghezeldasht Blood Borne Infections Research Center Academic Center for EducationCulture and Research(ACECR)Razavi Khorasan BranchMashhad 91779-49367Iran

BACKGROUND The presence of hepatitis C virus(HCV)RNA in liver tissue or peripheral blood mononuclear cells with no identified virus genome in the serum has been reported worldwide among patients with either normal or elevated serum liver *** characterization of occult HCV infection(OCI)epidemiology in the Middle East and Eastern Mediterranean(M and E)countries,a region with the highest incidence and prevalence rates of HCV infection in the world,would be effective for more appropriate control of the *** To estimate the pooled prevalence of OCI in M and E countries using a systematic review and *** A systematic literature search was performed using international,regional and local electronic *** conference proceedings and references from bibliographies were also reviewed *** search was carried out during May and June *** observational surveys were considered if they assessed the prevalence of OCI among the population of M and E countries by examination of HCV nucleic acid in peripheral blood mononuclear cells in at least 30 cases selected by random or non-random sampling *** meta-analysis was performed using Comprehensive Meta-analysis software based on heterogeneity assessed by Cochran’s Q test and I-square *** were considered statistically significant at a P value<*** A total of 116 non-duplicated citations were found in electronic sources and grey literature.A total of 51 non-overlapping original surveys were appraised,of which 37 met the inclusion criteria and were included in the *** were available from 5 of 26 countries including Egypt,Iran,Pakistan,Saudi Arabia,and *** overall prevalence rate of OCI was estimated at 10.04%(95%CI:7.66%-13.05%).The lowest OCI rate was observed among healthy subjects(4.79%,95%CI:2.86%-7.93%).The higher rates were estimated for patients suffering from chronic liver diseases(12.04%,95%CI:5.87%-23.10%),and multi-transfused

关键词： Occult hepatitis C Prevalence Review Meta-analysis Middle East Eastern Mediterranean region

Determination of Some Design Parameters for Roller Type Seed Metering Device

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Agricultural Science and Technology(A) 2012年第6期2卷 845-850页

作者： Hossein Navid Hamid Reza Ghassemzadeh mohammad moghaddam Department of Agricultural Machinery Engineering University of Tabriz Tabriz lran Department of Agronomy and Plant Breeding University ofTabriz Tabriz Iran

There are many design parameters in precision planters to be considered such as cell diameter, peripheral speed of roller, number of cells, manner of feeding seeds into cell and travel speed. In precision planters each cell must contain only one seed. Therefore, sliding the seed to the cell is important and depends on several parameters such as seed repose angle, seed dimensions and physics of cell. To help the seed to repose in the cell, making a groove on the roller would be very useful. Dimensions of this groove are very important and are considered as basic design parameters. This research was performed to determine some design parameters such as roller speed, travel speed, length and depth of groove for tomato seeds precision planting. In this regard, seeds with a diameter of 4 mm were used. The range of variation was based on calculations obtained. A roller with 42 mm width, 118 mm diameter and 15 cells on the surface was used in the experiment. For each cell, a triangular groove was created on the roller. The groove depth varied from zero at the beginning to the maximum value where the groove connected to the cell. The test unit had a continued and wide belt with 1 l m length. In each replication, planter worked for 20 s to reach a stable state. Thereafter, seeds were allowed to drop on the grease belt. Number of seeds and their spacing were measured on the 4.5 m of the belt. Results showed that the roller speed of 41.5 rpm, the planter travel speed of approximately 1 km/h, groove length of 6-8 mm and groove depth of 1.5 mm can improve planter performance for tomato pelleted seed.

关键词： Design metering device precision planter design parameters

Genetic Diversity and Relationships among Diploid and Tetraploid Cotton Using RAPD Markers

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

棉花学报 2008年第S1期20卷 78-页

作者： moghaddam mohammad Reza Ramazani MAJIDI Eslam MOFIDABADI Ali Jafari Cotton Research Station of Kashmar PO Box 398 Kashmar Khorasan-e-Razavi Iran ABRII of Iran Karaj Cotton Research Institute of Iran

Gossypium species(+49) represent a vast resource of genetic diversity for improvement of cultivated *** determine intra-and inter-specific genetic diversity and relationships,we

关键词： DNA fingerprinting Gossypium species genetic similarity RAPD

Auto-tuning PVT data using multi-objective optimization: Application of NSGA-Ⅱ algorithm

在线全文

学校读者我要写书评

暂无评论

Petroleum 2024年第1期10卷 135-149页

作者： Abdolhadi Zarifi mohammad Madani mohammad Jafarzadegan Reservoir Engineering Systems Petroleum Engineering Department Main Office Building of National Iranian South Oil Company (NISOC) Combined Planning Management National Iranian Oil Company (NIOC) Reservoir Engineering Division Petroleum Engineering Department Petroleum Engineering and Development Company (PEDEC)

Reservoir simulation is known as perhaps the most widely used, accurate, and reliable method for field development in the petroleum industry. An integral part of a reliable reservoir simulation process is to consider robust and rigorous tuned EOS models. Traditionally, EOS models are tuned iteratively through arduous workflows against experimental PVT data. However, this comes with a number of drawbacks such as forcingly using weight factors, which upon alteration adversely affects the optimization *** objective of the current work is thus to introduce an auto-tune PVT matching tool using NSGA-II multi-objective optimization. In order to illustrate the robustness of the presented technique, three different PVT samples are used, including two black-oil and one gas condensate sample. We utilize PengRobinson EOS during all the manual and auto-tuning processes. Comparison of auto-tuned EOS-generated results with those of experimental and computed statistical error values for these samples clearly show that the proposed method is robust. In addition, the proposed method, contrary to the manual matching process, provides the engineer with several matched solutions, which allows them to select a match based on the engineering background to be best amenable to the problem at hand. In addition, the proposed technique is fast, and can output several solutions within less time compared to the traditional manual matching method.

关键词： Auto-tuning PVT Equation of state NSGA-II Multi-objective optimization

Investigation of material composition,design,and performance of open-graded asphalt mixtures for semi-flexible pavement:A comprehensive experimental study

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Traffic and Transportation Engineering(English Edition) 2024年第1期11卷 92-116页

作者： mohammad Taghipoor Abolfazl Hassani mohammad M.Karimi Department of Civil and Environmental Engineering Tarbiat Modares UniversityTehranIran

The primary goal of this study is the design and construction of semi-flexible pavement(SFP)mixture in accordance with the engineering and mechanical *** study involves the use of a range of gradation curves,air void contents,cellulose and synthesized fibers,and neat and modified asphalt binders to prepare the open-graded asphalt(OGA)*** analyze the characteristics of these mixtures,a variety of test,namely binder drainage,semi-circular bending(SCB),Cantabro,wheel tracking,indirect tensile strength(ITS),and permeability tests were ***,to analyze the prepared grouting material,flexural strength,compressive strength,and fluidity tests were *** the final stage,SFP was compared to HMA in terms of engineering characteristics and *** to the results,SFP was more resistant to skid,rutting,fire,and moisture damage,while HMA had a better performance in fracture tests,including SCB *** to the results of the mechanical performance tests conducted on OGA mixtures,the highest and lowest values for air void content to achieve the highest mechanical performance level were 30%-35%and 25%,***,based on the laboratory results,it was determined that the required void ratio for constructing OGA mixtures was 24%-26%based on the bitumen type and fibers amount in the ***,SFP mixture can be regarded as a viable alternative to common pavements thanks to its high resistance to rutting and moisture damage,long freezing-thawing fatigue life,and adequate fire and skid resistance.

关键词： Semi-flexible pavement mixture Open-graded asphalt mixture Engineering properties Cantabro test Hot mix asphalt

Recent Progress in Bionic Hydrogels for Articular Cartilage:Tribological and Mechanical Characteristics

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第2期21卷 653-673页

作者： mohammad Javan Almasi Dangsheng Xiong School of Materials Science and Engineering Nanjing University of Science and TechnologyNanjing210094China

Cartilage regeneration and repair are considered clinical challenges since cartilage has limited capability for *** tissue-engineered materials have the ability to repair cartilage,they have weak mechanical characteristics and cannot resist long-term *** the other hand,surgery to replace the joint is frequently done to treat significant cartilage deterioration these ***,the materials that are being used for replacement have high friction coefficients,lack shock absorption functions,and lack *** research on natural articular cartilage structure and function may lead to bionic hydrogels,which have suitable physicochemical and biological characteristics(e.g.,tribological and mechanical properties and the ability to support loadbearing capability),but need *** on their tribological and mechanical characteristics,the current review highlights the most recent advancements of bionic hydrogels used for articular cartilage,highlighting both the field's recent progress and its potential for future *** this reason,firstly,some important property improvement methods of bionic hydrogels are discussed and then,the recent findings of various research on the making of those bionic materials are provided and *** seems that by using some modifications such as product design,surface treatments,animal tests,controlling the isoelectric point of hydrogels,and computer simulation,the intended mechanical and tribological characteristics of natural articular cartilage may be attained by the bionic hydrogels.

关键词： Bionic hydrogel Articular cartilage Mechanical property Tribological property Lubrication