检索结果-南通市图书馆

journal of Rare Earths 2024年第7期42卷 1385-1393,I0007页

作者： A.Ezaier R.masrour m.ham.doun.j.kharbach A.Rezzouk A.Hourmatallah N.Benzakour K.Bouslykhane Laboratory of Solid Physics Faculty of Sciences Dhar El MehrazSidi Mohamed Ben Abdellah UniversityBP 1796FezMorocco Equipe de Physique du Solide LaboratoiresLIPIEcole Normale SupérieureBensoudaFèsMorocco

In this paper,we analyzed the physical characteristics of the ternary alloys RE_(2)Rh_(3)Ge(RE=Pr and Sm)using the first principles calculation based on functional density theory integrated in the Wien2k *** calculated formation energies of Pr_(2)Rh_(3)Ge and Sm_(2)Rh_(3)Ge are−5.3827 and−5.2782 eV/atom,respectively,showing that these alloys may exist *** results of the band structure and density of states indicate that all of the compounds tested are magnetic metals,and their magnetism is mostly related to the contribution of Pr and Sm *** total magnetic moments of Pr_(2)Rh_(3)Ge and Sm_(2)Rh_(3)Ge are 4.07245 and 11.16161μB/f.u,*** parameters such as heat capacity at constant pressure,entropy,Debye temperature,lattice volume,compressibility coefficients,and Grüneisen parameter alloys were calculated using the Gibbs algorithm and studied in depth over a large temperature range of 0-900 *** Debye temperature increases with increasing pressure and decreases with decreasing ***,the Debye temperatures calculated at p=0 GPa and T=300 K are equal to be 342 and 322 K for Pr_(2)Rh_(3)Ge and Sm_(2)Rh_(3)Ge,*** optical characteristics such as the real and imaginary portions of the dielectric function,the absorption coefficient,the energy-loss function,and the refractive index were investigated and discussed in more depth.

关键词： magnetic metals Functional density theory Density of states magnetic moment Optical and thermodynamic properties Rare earths

Classification and technical target of water electrolysis for hydrogen production

在线全文

学校读者我要写书评

暂无评论

journal of Energy Chemistry 2024年第8期95卷 554-576,I0012页

作者： Kahyun ham Sooan Bae jaeyoung Lee Ertl Center for Electrochemistry and Catalysis Gwangju Institute of Science and Technology(GIST)123 Cheomdangwagi-RoBuk-guGwangju 61005South Korea Department of Heterogeneous Reactions Max Planck Institute for Chemical Energy ConversionStiftstr.34-36Mülheim an der RuhrGermany School of Earth Sciences and Environmental Engineering GIST123 CheomdangwagiroBuk-guGwangju 61005South Korea International Future Research Center of Chemical Energy Storage and Conversion Processes GIST123 CheomdangwagiroBuk-guGwangju 61005South Korea eSuS Co. Ltd.#408S6 BuildingSchool of Environment and Energy EngineeringGIST123 CheomdangwagiroBuk-guGwangju 61005South Korea

Continuous efforts are underway to reduce carbon emissions worldwide in response to global climate *** electrolysis technology,in conjunction with renewable energy,is considered the most feasible hydrogen production technology based on the viable possibility of large-scale hydrogen production and the zero-carbon-emission nature of the ***,for hydrogen produced via water electrolysis systems to be utilized in various fields in practice,the unit cost of hydrogen production must be reduced to$1/kg H_(2).To achieve this unit cost,technical targets for water electrolysis have been suggested regarding components in the *** this paper,the types of water electrolysis systems and the limitations of water electrolysis system components are *** suggest guideline with recent trend for achieving this technical target and insights for the potential utilization of water electrolysis technology.

关键词： Water electrolysis Hydrogen production Technical target Electrochemistry

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.j.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： m.NEmATI m.SEFID A.KARImIPOUR A.j.ChamKHA Faculty of mechanical Engineering Yazd UniversityYazd ***Iran Department of mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(mF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBm)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed mF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and mF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

在线全文

学校读者我要写书评

暂无评论

aBIOTECH 2024年第2期5卷 239-246页

作者： j.m.Lukasiewicz C.C.m.van de Wiel L.A.P.Lotz m.j.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques Consumer transparency Plant products

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第10期42卷 1950-1959页

作者： P.A.martínez-montoya j.m.del Río A.de j.morales-Ramirez m.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.Lindavista Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.Lindavista Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/n

Polymeric nanoparticles of poly(methyl methacrylate) were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-IR) and ultraviolet-visible(UV-Vis) *** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEm).The polymeric materials were used for recovery of [Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85% of [Eu] at pH of *** images of SEm after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50% of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of6.

关键词： Chelating effect Emulsion polymerization Extraction process Rare earths Stripping process [Eu]recovery

Analysis of synthetic parameters for coating aluminum powders with phenyltriethoxysilane coupling agent and their effects on powder flow behavior

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第7期90卷 412-417页

作者： Lillian m.mawby Bellamarie Ludwig Benjamin j.Lear Department of Chemistry The Pennsylvania State UniversityUniversity ParkPA16802USA Applied Research Laboratory The Pennsylvania State UniversityUniversity ParkPA16802USA

Though silanization of aluminum powder is currently used to improve its flow properties,for use as an alternative fuel source,there are a wide range of experimental parameters for the process and not all of them have been thoroughly *** this is complete,it is unknown if the process is optimized in terms of time,efficiency,and ***,we report on a study into the effects of changes in humidity,degree of agitation,reaction temperature,and curing time upon the deposition of phenyl triethoxysilane into 20μm(d50)aluminum *** confirm the deposition of the coating via diffuse reflectance infrared spectroscopy and x-ray photoelectron *** then characterize the coated particles using apparent density measurements and Carney flow *** analysis of variance,we find that,of the parameters explored,only changes in cure time and reaction temperature provide meaningful changes to the apparent density,while none of our parameters produced statistically significant changes in Carney flow ***,we conclude that,when optimizing silanization of aluminum particles,environmental control of humidity is unneeded and that the reaction can be run with minimal *** ability to largely ignore these parameters is a benefit to large-scale processing.

关键词： Aluminum powder Silane Fluidization Apparent density Carney flow

Background removal from global auroral images:Data-driven dayglow modeling

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第1期8卷 247-257页

作者： A.Ohma m.madelaire K.m.Laundal j.P.Reistad S.m.Hatch S.Gasparini S.j.Walker Birkeland Centre for Space Science Department of Physics and TechnologyUniversity of BergenBergenNorway

Global images of auroras obtained by cameras on spacecraft are a key tool for studying the near-Earth ***,the cameras are sensitive not only to auroral emissions produced by precipitating particles,but also to dayglow emissions produced by photoelectrons induced by *** emissions and scattered sunlight can contribute to the background *** fully utilize such images in space science,background contamination must be removed to isolate the auroral *** we outline a data-driven approach to modeling the background intensity in multiple images by formulating linear inverse problems based on B-splines and spherical *** approach is robust,flexible,and iteratively deselects outliers,such as auroral *** final model is smooth across the terminator and accounts for slow temporal variations and large-scale asymmetries in the *** demonstrate the model by using the three far ultraviolet cameras on the Imager for magnetopause-to-Aurora Global Exploration(ImAGE)*** method can be applied to historical missions and is relevant for upcoming missions,such as the Solar wind magnetosphere Ionosphere Link Explorer(SmILE)mission.

关键词： aurora dayglow modeling global auroral images far ultraviolet images dayglow removal

Greatly enhanced corrosion/wear resistances of epoxy coating for mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

在线全文

学校读者我要写书评

暂无评论

journal of magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.Y.Xue X.j.Li j.H.Chu m.m.Li D.N.Zou L.B.Tong School of metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of mg alloys.

关键词： mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer