检索结果-南通市图书馆

Enhanced cyclic stability of partially disordered spinel cathodes through direct fluorination with gaseous fluorine

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1635-1646页

作者： Yong-Nian Ma ling-chen kong Shao-Shan chen Yong Wang Li-Dong Sun Cong Peng Meng-Meng Qin Yu Li Wei Feng Tianjin Key Laboratory of Composite and Functional Materials School of Materials Science and EngineeringTianjin UniversityTianjin300072China Institute of Advanced Technology and Equipment Beijing University of Chemical TechnologyBeijing100029China

Spinel-type cathodes are considered an optimal substitute for conventional layered oxide cathodes owing to their use of inexpensive and earth-abundant manganese as the redox-active ***,the introduction of cation disorder can effectively suppress the detrimental two-phase reaction to realize high capacities in a wide voltage ***,the continuous capacity decay during cycles has hindered the widespread application of these cathode *** fluorides exhibit excellent electrochemical stability at high voltage;therefore,in this study,the direct F2 gas reaction with a partially disordered spinel cathode(Li_(1.6)Mn_(1.6)O_(3.7)F_(0.3,)LMOF1.6)was initially applied to investigate the impacts of fluorination on the surface structure and electrochemical *** inorganic fluorinated layer,mainly containing LiF,was distributed uniformly on the surface of LMOF1.6nanoparticles after fluorination for an appropriate time without the turbulence caused by the valency of manganese cation,which improved the capacity retention and rate capability by the suppression of structural damage,parasitic reaction,and cation *** LMOF1.6cathode fluorinated for 0.5 h exhibited a capacity of283.6 mAh·g^(-1)at 50 mA·g^(-1)and an enhanced capacity retention of 29.6%after 50 cycles in the voltage range of1.5-4.8 V,as compared to the pristine LMOF1.6 with only27.9%capacity retention.

关键词： Spinel-type cathodes Direct fluorination Capacity retention ability High rate capability

Micro-strain regulation strategy to stabilize perovskite lattice based on the categories and impact of strain on perovskite solar cells

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 578-604页

作者： Caixia Li Wenwu Liu Shiji Da lingbin kong Fen Ran State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of Technology School of Materials Science and Engineering Lanzhou University of Technology

Photovoltaic metal halide perovskite solar cells(PSCs) convert light to electricity more efficiently than crystalline silicon cells, and the cost of materials used to make them is lower than that of silicon *** efficiency is not a core issue affecting the application of perovskite solar cells in special *** present, stability is the major technical encounters that hinders its further commercial development. Microstrain in PSCs is currently a significant factor responsible for the device's instability. Strain-induced ion migration is widely believed to accelerate perovskite degradation even when external stimuli are ***, it is imperative to study strain to enhance the stability of PSCs. This paper reviews recent developments to understand strain's origin and effect mechanisms on performance of PSCs, including ion migration,failure behavior, defect formation, and its effect on photoelectric properties, stability, and ***, several well-known strain management strategies are systematically introduced based on the strain effect mechanism and strain engineering on the film, providing more clues for further preparation with increased stability. The manipulation of external physical strain applied from films to entire devices has been extensively studied. Furthermore, recommendations for future research directions and chemical approaches have been provided. It is emphasized that strain engineering plays a crucial role in improving the efficiency and longevity of PSCs. Tensile strain causes rapid degradation, while moderate compressive strain and external strain control could improve properties and stability. Efforts should focus on controlling compressive strain to mitigate residual tensile strain and introducing it in a controlled manner. Future research endeavors may focus on exploring these pathways to improve the efficiency and lifespan of PSCs.

关键词： Halide perovskite solar cells Strain origins Strain effects Strain management

Effects of Cover Sheets on the Nugget Growth and Fracture Behavior of Resistance Spot Welded Q&P980 Steel Joints

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2022年第4期35卷 360-373页

作者： Zhanxiang ling Ting chen Liang kong Min Wang Shanghai Key Laboratory of Materials Laser Processing and Modifcation Shanghai Jiao Tong UniversityShanghai 200240China

The resistance spot weldability of galvanized ultra-high-strength steels is not satisfed,the joints are prone to interfacial fracture and the weldable current range is *** solve the problems,a novel method called resistance spot welding with double-sided cover sheets was introduced to weld a galvanized Q&P980 steel with the thickness of 1.2 *** thin SPCC mild steel sheets were chosen as cover sheets and were placed symmetrically at both sides between the Q&P980 steels and the electrodes,then the RSW process was carried *** with the traditional RSW method,the joints obtained by using the novel method achieved larger tensile shear strength and energy absorption,which increased by 26.9%and 52.6%,*** increasing the welding current,the failure mode transferred from interfacial fracture to nugget pull-out fracture or base metal tearing *** contrast,the joints always showed interfacial fracture without cover *** improvement of the joint performance was mainly attributed to the enlargement of the *** the help of fnite element simulation,it was found that the cover sheets helped increase the contact area and reduced the current density during welding,which postponed the expulsion,and a larger area could be evenly *** application of the novel method can be easily extended to the resistance spot welding of other ultra-high-strength steels with various thicknesses.

关键词： Resistance spot welding Q&P980 steel Cover sheet Mechanical property

3D Printing of Tough Hydrogel Scaffolds with Functional Surface Structures for Tissue Regeneration

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 18-45页

作者： Ke Yao Gaoying Hong Ximin Yuan Weicheng kong Pengcheng Xia Yuanrong Li Yuewei chen Nian Liu Jing He Jue Shi Zihe Hu Yanyan Zhou Zhijian Xie Yong He State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China Liangzhu Laboratory Zhejiang UniversityHangzhou 310027People’s Republic of China Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province College of Mechanical EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China Stomatology Hospital School of StomatologyZhejiang University School of MedicineHangzhou 310027People’s Republic of China State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001People’s Republic of China Institute of Digital Medicine Nanjing First HospitalNanjing Medical UniversityNanjing 210006People’s Republic of China

Hydrogel scaffolds have numerous potential applications in the tissue engineering ***,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical *** by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this ***,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent ***,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell ***,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT *** experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.

关键词： 3D printing Tough hydrogel scaffold Functional surface structure Tissue regeneration Biomaterials

The impact of urban planning on land use and land cover in Pudong of Shanghai, China

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2003年第2期15卷 205-214页

作者： Nobukazu Nakagoshi chen Jia-kuan kong ling-yi Graduated School for International Development and Cooperation Hiroshima UniversityMinistry of Education Key Laboratory for Biodiversity Science and Ecological Engineering Institute of Biodiversity Science Fudan UniversitySchool of Environmental Engineering Tongji University Kagamiyama Higashi-Hiroshima 739—8529 JapanShanghai 200433 China Shanghai 200092 China

Functional zones in cities constitute the most conspicuous components of newly developed urban areas, and have been a hot spot for domestic and foreign investors in China, which not only show the expanse of urban space accompanied by the shifts both in landscape (from rural to urban) and land use(from less extensive to extensive), but also display the transformation of regional ecological functions. By using the theories and methods of landscape ecology, the structure of landscapes and landscape ecological planning can be analyzed and evaluated for studying the urban functional zones' layout. In 1990, the Central Government of China declared to develop and open up Pudong New Area so as to promote economic development in Shanghai. Benefited from the advantages of Shanghai's location and economy, the government of Pudong New Area has successively built up 7 different functional zones over the past decade according to their functions and strategic goals. Based on the multi-spectral satellite imageries taken in 1990, 1997 and 2000, a landscape ecology analysis was carried out for Pudong New Area of Shanghai, supported by GIS technology. Green space (including croplands) and built-up areas are the major factors considered in developing urban landscape. This paper was mainly concerned with the different spatial patterns and dynamics of green space, built-up areas and new buildings in different functional zones, as influenced by different functional layouts and development strategies. The rapid urbanization in Pudong New Area resulted in a more homogeneous landscape. Agricultural landscape and suburban landscape were gradually replaced by urban landscape as the degree of urbanization increased. As a consequence of urbanization in Pudong, not only built-up patches, but also newly-built patches and green patches merged into one large patch, which should be attributed to the construction policy of extensive green space as the urban development process in Pudong New Area. The

关键词： functional zone landscape ecology Pudong urbanization

The School that Changes Mindsets

在线全文

学校读者我要写书评

暂无评论

China Today 2025年第1期74卷 62-64页

作者： GUO QING kong SIQI 不详

China’s highest-altitude primary school is not only teaching children of farmers and herders but their parents as *** Sinopec Primary School in Nagqu,a city in Xizang Autonomous Region in southwest China,is known as the school“the closest to the sky”due to its high-altitude location-a breathtaking 4,700 meters above sea *** by oil and gas giant Sinopec as part of its corporate social responsibility,the school opened in 2012 and has since become a microcosm of China’s drive for education,especially in remote and rural areas,to ensure that no one is left behind.

关键词： altitude farmers southwest

A low redox potential and long life organic anode material for sodium-ion batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 557-564页

作者： Zhi Li Yang Wei Kang Zhou Xin Huang Xing Zhou Jie Xu Taoyi kong Junwei Lucas Bao Xiaoli Dong Yonggang Wang Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New Energy Collaborative Innovation Center of Chemistry for Energy Materials (iChEM) Fudan University Department of Chemistry Boston College School of Materials Science and Engineering Anhui University of Technology

Sodium-ion batteries （SIBs） with organic electrodes are an emerging research direction due to the sustainability of organic materials based on elements like C,H,O,and sodium ***,organic electrode materials for SIBs are mainly used as cathodes because of their relatively high redox potentials（>1 V）.Organic electrodes with low redox potential that can be used as anode are ***,a novel organic anode material （tetrasodium 1,4,5,8-naphthalenetetracarboxylate,Na4TDC） has been developed with low redox potential （ling stability for 1200 cycles even with a high mass loading of up to 20 mg *** pairing with a thick Na3V2（PO4）3cathode (20.6 mg cm-2),the as-fabricated full cell exhibited high operating voltage （2.8 V）,excellent rate performance and cycling stability with a high capacity retention of 88.7% after 200 cycles,well highlighting the Na4TDC anode material for SIBs.

关键词： Organic anode material Low redox potential Composite anode Sodium-ion batteries

Subtropical urban turfs： Carbon and nitrogen pools and the role of enzyme activity

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2018年第3期30卷 18-28页

作者： ling kong LM Chu School of Life Sciences The Chinese University of Hong Kong Shatin NT Hong Kong SAR China department of orthopaedics & traumatology faculty of medicine the chinese university of hong kong

Urban grasslands not only provide a recreational venue for urban residents, but also sequester organic carbon in vegetation and soils through photosynthesis, and release carbon dioxide through respiration, which largely contribute to carbon storage and fluxes at regional and global scales. We investigated organic carbon and nitrogen pools in subtropical turfs and found that dissolved organic carbon（DOC） and dissolved organic nitrogen（DON）were regulated by several factors including microbial activity which is indicated by soil enzymatic activity. We observed a vertical variation and different temporal patterns in both soil DOC, DON and enzyme activities, which decreased significantly with increasing soil depths. We further found that concentration of soil DON was linked with turf age. There were correlations between grass biomass and soil properties, and soil enzyme activities. In particular, soil bulk density was significantly correlated with soil moisture and soil organic carbon（SOC）. In addition, DOC correlated significantly with DON. Significant negative correlations were also observed between soil total dissolved nitrogen（TDN） and grass biomass of Axonopus compressus and Zoysia matrella. Specifically, grass biomass was significantly correlated with the soil activity of urease and β-glucosidase. Soil NO3-N concentration also showed negative correlations with the activity of both β-glucosidase and protease but there were no significant correlations between cellulase and soil properties or grass biomass. Our study demonstrated a relationship between soil C and N dynamics and soil enzymes that could be modulated to enhance SOC pools through management and maintenance practices.

关键词： Dissolved organic carbon (DOC)lDissolved organic nitrogen (DON)lSoil enzymelTurfgrass

On the Integrality of Characteristic Elements in Nonabelian Iwasawa Theory

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2008年第1期24卷 43-58页

作者： ling Quan kong School of Mathematical Sciences Beijing Normal University Beijing 100875 P. R. China

This paper is concerned with a conjecture formulated by Coates et al in [4] which describes the relation between the integrality of the characteristic elements and their evaluations in the noncommutative Iwasawa theor... 详细信息

关键词： p-adic Lie group K group characteristic element Iwasawa theory