检索结果-南通市图书馆

Characteristics of Biopellets Manufactured from Various Lignocellulosic Feedstocks as Alternative Renewable Energy Sources

引用

Journal of Renewable Materials 2024年第6期12卷 1103-1123页

作者： Anggara Ridho Putra Apri Heri Iswanto Arif Nuryawan Saptadi Darmawan ElvaraWindra Madyaratri Widya Fatriasari lee seng hua Petar Antov Harisyah Manurung Ade Pera Amydha Sudrajat Herawati Pendi Department of Forest Products Faculty of ForestryUniversitas Sumatera Utara.Kampus USU Padang BulanMedan20155Indonesia Research Center for Biomass and Bioproducts National Research and Innovation Agency(BRIN)Jl Raya Bogor KM 46 CibinongBogor16911Indonesia Department of Wood Industry Faculty of Applied SciencesUniversiti Teknologi MARA(UiTM)Cawangan Pahang Kampus JengkaShah Alam26400Malaysia Faculty of Forest Industry University of ForestrySofia1797Bulgaria

The increased valorization of renewable and cost-effective lignocellulosic feedstocks represents a viable,sustainable,and eco-friendly approach toward the production of biopellets as alternative energy *** aim of this research work was to investigate and evaluate the feasibility of using various lignocellulosic raw materials,i.e.,raru(Cotylelobium melanoxylon),mangrove(Rhizophora spp.),sengon(Paraserianthes falcataria),kemenyan toba(Styrax sumatrana),oil palm(Elaeis guineensis),manau rattan(Calamus manan),and belangke bamboo(Gigantochloa pruriens)for manufacturing biopellets with different particle *** raw materials used were tested for their moisture content,specific gravity,ash,cellulose,and lignin *** addition,thermal analyses,i.e.,calorific values,thermogravimetric analysis(TGA),and differential scanning calorimetry(DSC),were *** following properties of the biopellets produced were investigated:moisture content,volatile matter,ash content,fixed carbon,density,and thermal *** on an analysis of the raw materials,raru had the lowest moisture content(12%)and ash content(1.5%)and the highest specific gravity(1.2).Markedly,palm oil stem had the highestα-cellulose(55%)and lignin(37%)*** accordance with the SNI 8675:2018 standard requirements,biopellets with optimal properties(moisture content of 1.4%,ash content of 0.79%,density of 1.09 g/m^(3),calorific value of 4672 cal/g,and TGA residue of 13.9%),were manufactured from raru wood.

关键词： Biomass biopellet renewable energy particle size

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition

引用

Journal of Renewable Materials 2024年第7期12卷 1311-1341页

作者： Apri Heri Iswanto Harisyah Manurung Asma Sohail lee seng hua Petar Antov Deded Sarip Nawawi Sarah Latifah Dewi Shafa Kayla Sukma Surya Kusumah Muhammad Adly Rahandi Lubis Linda MakovickáOsvaldová MohdHazwan Hussin Rangabhashiyam Selvasembian Lum Wei Chen Puji Rahmawati Nurcahyani Nam Hun Kim Widya Fatriasari Department of Forest Products Faculty of ForestryUniversitas Sumatera UtaraKampus USU Padang BulanMedanNorth Sumatra20155Indonesia Department of Chemistry Lahore College for Women UniversityLahore4444Pakistan Department of Wood Industry Faculty of Applied SciencesUniversiti Teknologi MARA(UiTM)Cawangan Pahang Kampus JengkaShah Alam26400Malaysia Faculty of Forest Industry University of ForestrySofia1797Bulgaria Department of Forest Product Faculty of Forestry and EnvironmentIPB UniversityBogor16680Indonesia Research Center for Biomass and Bioproducts National Research and Innovation Agency(BRIN)Cibinong16911Indonesia Department of Forest Engineering Faculty of Security EngineeringUniversity of ZilinaZilina01001Slovakia Materials Technology Research Group(MaTReC) School of Chemical SciencesUniversiti SainsMalaysiaMindenPenang11800Malaysia Department of Environmental Science and Engineering School of Engineering and SciencesSRM University-APAmaravatiAndhra Pradesh522240India Department of Bio and Natural Resources Faculty of Bioengineering and TechnologyUniversitiMalaysia KelantanJeliKelantan17600Malaysia Department of Forest Biomaterials Engineering College of Forest and Environmental SciencesKangwon National UniversityChuncheon24341Republic of Korea

Lignin,lignosulfonate,and synthesized phosphorylated lignosulfonate were introduced as greenﬁllers in citric acid-sucrose adhesives for bonding particleboard fabricated from areca leaf sheath(ALS).The characteristics of particleboards were compared to that of ultralow emitting formaldehyde(ULEF-UF).Theﬁllers derived from Eucalyptus ***-lignin were added forﬂame retardancy enhancement.10%of each lignin and modiﬁed lig-nin was added into the ULEF-UF and citric acid-sucrose bonded *** applied to particle-boards included thermal characteristics,X-ray diffraction analysis(XRD),morphological properties,Fourier transform infrared spectroscopy(FTIR),as well as physical,mechanical,andﬁre resistance characteristics of the laboratory-fabricated *** and modiﬁed lignin resulted in improved thermal stability of the composites bonded with ULEF-UF while the improvement in the particleboard bonded with citric acid-sucrose was not signiﬁ*** introduction ofﬁller exerted a higher inﬂuence on the UF-bonded particleboards compared to composites fabricated with citric ***,the presence of lignin,lignosulfonate,and phosphorylated lignosulfonate enhanced the mechanical strength of the ULEF-bonded particleboards,although their dimensional stability has ***,the use of lignin and lignosulfonate enhanced theﬁre resis-tance of the particleboards produced with lower observed weight *** laboratory particleboards exhibited satisfactoryﬁre resistance,attaining a V-0 rating in according to the UL-94 standard.

关键词： Modiﬁed lignin eco-friendly particleboard ﬁre and thermal properties citric acid-sucrose ultralow-emitting urea-formaldehyde resin

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparison of three processing methods for laminated bamboo timber production

引用

Journal of Forestry Research 2019年第1期30卷 363-369页

作者： Edi Suhaimi Bakar Muhammad Nadzim Mohd Nazip Rogerson Anokye lee seng hua Faculty of Forestry Universiti Putra Malaysia Institute of Tropical Forestry and Forest Products (INTROP) Universiti Putra Malaysia

Three processing techniques, split-squaring(SS),V-grooving(VG), and split-edging(SE), were evaluated and compared in terms of their processing time and recovery. Semantan bamboo(Gigantochloa scortechinii Gamble) was used as a raw material and the results showed that the VG-method required the longest processing time(32.1 min), followed by the SS-method(18.2 min), and the SE-method(17.9 min). However, the VG-method showed the highest recovery(82.0%) compared to the SS-method and SE-method, 31.0 and 49.4%, respectively. When both processing time and recovery factors were combined with the same weighing factor, the highest value was recorded with the VG-method(49.1), while the SE-method had values of 31.1 and the SS-method 12.8. The results suggest that the VG-method is the best option. However, the V-grooving machine is still a prototype and therefore the SE-method could be an alternative option until the improved V-grooving machine is available.

关键词： Bamboo culm Laminated bamboo timber Vgrooving method Split-squaring method Split-edging method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bending,Compression and Bonding Performance of Cross-Laminated Timber(CLT)Made from Malaysian Fast-Growing Timbers

引用

Journal of Renewable Materials 2022年第11期10卷 2851-2869页

作者： Norshariza Mohamad Bhkari Lum Wei Chen Anis Azmi Muhammad Shaiful Nordin Norman Wong Shew Yam Zakiah Ahmad lee seng hua Institute for Infrastructure Engineering and SustainableManagement(IIESM) Universiti TeknologiMARAShah Alam40450Malaysia School of Civil Engineering College of EngineeringUniversiti Teknologi MARAShah Alam40450Malaysia Sapulut Forest Development Sdn.Bhd. Kota Kinabalu88400Malaysia Institute of Tropical Forestry and Forest Products(INTROP) Universiti Putra Malaysia UPMSerdang43400Malaysia

This study investigated the bending,compression as well as the bonding performance of CLT panels made from fast-growing timber species,i.e.,Laran(Neolamarckia cadamba)and Batai(Paraserianthes falcataria).The variables studied were timber species(Laran and Batai),layers of lamination(3-layer and 5-layer),loading direction in bending(in-plane and out-of-plane),loading direction in compression(x-,y-,and z-axis)and different treatment conditions for bonding performance *** desired outputs of this study were bending and compression properties(strength and stiffness)as well as bonding performance(block shear strength,wood failure percentage and delamination value).The bending and compression test were conducted according to EN16351:2015 and EN408:2012,*** the other hand,the bonding performance test was determined by block shear and delamination test based on EN16351:2015 and EN14374:2004,*** to block shear test,the samples were subjected to three different treatment *** results showed that CLT made from 3-layer Laran timber,loaded at out-of-plane direction exhibited the highest bending ***,CLT made from 5-layered Batai timber,loaded at in-plane direction showed the lowest bending *** samples for compression loaded at x-axis exhibited the best compressive ***,Laran CLT showed greater bonding performance determined by shear test compared to Batai CLT for both 3-and 5-layer *** the contrary,delamination results showed that Batai CLT demonstrated better bonding performance compared to Laran *** terms of bonding performance measured by wood failure percentage(WFP),most samples under various treatment conditions showed WFP≥80%except for samples under wet condition with WFP≤60%.

关键词： Cross-laminated timber plantation timber flexural performance bonding performance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Characterization of Formacell Lignin Derived from Black Liquor as a Potential Green Additive for Advanced Biocomposites

引用

Journal of Renewable Materials 2023年第6期11卷 2865-2879页

作者： Sri Hidayati Eugenia Fonny Budiyanto Hadi Saputra Sutopo Hadi Apri Heri Iswanto Nissa Nurfajrin Solihat Petar Antov lee seng hua Widya Fatriasari MohdSapuan Salit Agricultural Product Technology Department Faculty of AgricultureThe University of LampungJl.Sumantri Brojonegoro No.1Bandar LampungIndonesia Department of Forest Product Faculty of ForestryUniversitas Sumatera UtaraKampus USU Padang BulanNorth SumatraIndonesia JATI-Sumatran Forestry Analysis Study Center Jl.Tridharma Ujung No.1Kampus USUMedanNorth SumatraIndonesia Research Center for Biomass and Bioproducts National Research and Innovation Agency(BRIN)Jl.Raya BogorCibinongIndonesia Faculty of Forest Industry University of ForestrySofiaBulgaria Department of Wood Industry Faculty of Applied SciencesUniversiti Teknologi MARA(UiTM)Cawangan Pahang Kampus JengkaLintasan SemarakBandar JengkaMalaysia Institute of Tropical Forestry and Forest Products Universiti Putra MalaysiaSelangorMalaysia Research Collaboration Center for Marine Biomaterials Jl.Ir.SukarnoJatinangorSumedangWest JavaIndonesia Advanced Engineering Materials and Composites Research Centre Department of Mechanical and Manufacturing EngineeringUniversiti Putra MalaysiaSelangorMalaysia

Black liquor is obtained as a by-product of the pulping process,which is used to convert biomass into pulp by removing lignin,hemicelluloses and other extractives from wood to free cellulose *** represents a major constituent in black liquor,with quantities varying from 20%to 30%,of which a very low share is used for manufacturing value-added products,while the rest is mainly burned for energy purposes,thus underestimating its great potential as a raw ***,it is essential to establish new isolation and extraction methods to increase lignin valorization in the development of bio-based *** aim of this research work was to determine the effect of KOH or ethanol concentration as an isolation agent on lignin yields and the chemical characteristics of lignin isolated from formacell black liquor of oil palm empty fruit bunch(OPEFB).Isolation of lignin was carried out using KOH with various concentrations ranging from 5%to 15%(w/v).Ethanol was also used to precipitate lignin from black liquor at concentrations varying from 5%to 30%(v/v).The results obtained showed that the addition of KOH solution at 12.5%and 15%concentrations resulted in better lignin yield and chemical properties of lignin,i.e.,pH values of 3.86 and 4.27,lignin yield of 12.78%and 14.95%,methoxyl content of 11.33%and 10.13%,and lignin equivalent weights of 476.25 and 427.03,*** to its phenolic structure and rich functional groups that are favorable for modifications,lignin has the potential to be used as a green additive in the development of advanced biocomposite products in various applications to replace current fossil fuel-based material,ranging from fillers,fire retardants,formaldehyde scavengers,carbon fibers,aerogels,and wood adhesives.

关键词： Formacell black liquor lignin properties KOH ethanol oil palm empty fruit bunch advanced biocomposite

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Development and Characterization of Eco-Friendly Non-Isocyanate Urethane Monomer from Jatropha curcas Oil for Wood Composite Applications

引用

Journal of Renewable Materials 2023年第1期11卷 41-59页

作者： Samsul Bhakri Muhammad Ghozali Edy Cahyono Evi Triwulandari Witta Kartika Restu Nissa Nurfajrin Solihat Apri Heri Iswanto Petar Antov Viktor Savov lee seng hua ErikaAyu Agustiany Lubos Kristak Widya Fatriasari Department of Chemistry Universitas Negeri SemarangSemarang50229Indonesia Research Center for Chemistry National Research and Innovation Agency(BRIN)Serpong15314Indonesia Research Center for Biomass and Bioproducts National Research and Innovation Agency(BRIN)Cibinong16911Indonesia Department of Forest Product Faculty of ForestryUniversitas Sumatera UtaraMedan20155Indonesia JATI-Sumatran Forestry Analysis Study Center Medan20155Indonesia Faculty of Forest Industry University of ForestrySofia1797Bulgaria Laboratory of Biopolymer and Derivatives Institute of Tropical Forestry and Forest ProductUniversiti Putra MalaysiaSelangor43400Malaysia Department of Forest Products Faculty of Forestry and EnvironmentIPB UniversityBogor16680Indonesia Faculty of Wood Sciences and Technology Technical University in ZvolenZvolen96001Slovakia

The aim of this research work was to evaluate the potential of using renewable natural feedstock,i.e.,Jatropha curcas oil(JCO)for the synthesis of non-isocyanate polyurethane(NIPU)resin for wood composite *** polyurethane(PU)is synthesized through a polycondensation reaction between isocyanate and ***,utilizing toxic and unsustainable isocyanates for obtaining PU could contribute to negative impacts on the environment and human ***,the development of PU from eco-friendly and sustainable resources without the isocyanate route is *** this work,tetra-n-butyl ammonium bromide was used as the activator to open the epoxy ring with 3-Aminopropyltriethoxisylane as a catalyst to yield urethane of JCO(UJCO).The UJCO were characterized by Fourier Transform Infra-Red spectroscopy(FTIR)and their oxirane,and hydroxyl values were *** result showed that a decrease in oxirane value was found while the hydroxyl value was increased during the time,confirming that the urethane group was *** presence of functional groups in FTIR spectra at wave numbers 1732.08,1562.34,and 3348.42 cm^(−1) indicates the functional groups of C=O(urethane carbonyl),–NH,and–OH,respectively confirmed this *** potential applications of NIPU in the wood composite were also outlined.

关键词： Jatropha curcas oil urethane groups non-isocyanate polyurethane epoxidized JCO cyclic carbonate oxirane value wood composites

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Surface-phonon-polariton-enhanced photoinduced dipole force for nanoscale infrared imaging

引用

National Science Review 2024年第5期11卷 227-235页

作者： Jian Li Junghoon Jahng Xuezhi Ma Jing Liang Xue Zhang Qianhao Min Xiao-Liang Wang Shuangjun Chen Eun Seong lee Xing-hua Xia State Key Lab of Analytical Chemistry for Life Science School of Chemistry and Chemical Engineering Nanjing University Hyperspectral Nano-Imaging Team Korea Research Institute of Standards and Science Institute of Materials Research and Engineering Agency for ScienceTechnology and Research College of Materials Science and Engineering Nanjing Tech University

The photoinduced dipole force(Pi DF) is an attractive force arising from the Coulombic interaction between the light-induced dipoles on the illuminated tip and the sample. It shows extreme sample-tip distance and refractive index dependence, which is promising for nanoscale infrared(IR) imaging of ultrathin samples. However, the existence of Pi DF in the mid-IR region has not been experimentally demonstrated due to the coexistence of photoinduced thermal force(Pi TF), typically one to two orders of magnitude higher than Pi DF. In this study, we demonstrate that, with the assistance of surface phonon polaritons, the Pi DF of c-quartz can be enhanced to surpass its Pi TF, enabling a clear observation of Pi DF spectra reflecting the properties of the real part of permittivity. Leveraging the detection of the Pi DF of phonon polaritonic substrate, we propose a strategy to enhance the sensitivity and contrast of photoinduced force responses in transmission images, facilitating the precise differentiation of the heterogeneous distribution of ultrathin samples.

关键词： surface phonon polariton photoinduced dipole force nanoscale infrared imaging ultrathin sample

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Improving lung allograft function in the early post-operative period through the inhibition of pyroptosis

引用

Medical Review 2024年第5期4卷 384-394页

作者： Doug A.Gouchoe Zhentao Zhang Jung-Lye Kim Yong Gyu lee Bryan A.Whitson hua Zhu Department of Surgery Division of Cardiac SurgeryThe Ohio State University Wexner Medical CenterColumbusOHUSA COPPER Laboratory The Ohio State University Wexner Medical CenterColumbusOHUSA Cardiac Surgery The Ohio State University Wexner Medical CenterColumbusOH 43210USA

Lung transplantation is the only deﬁnitive ther-apy for end-stage pulmonary *** than 20%of offered lungs are successfully transplanted due to a limited ischemic time window and poor donor lung quality man-ifested by pulmonary edema,hypoxia,or ***,poor donor organ recovery and utilization are signiﬁcant barriers to wider implementation of the life-saving therapy of *** ischemia reperfusion injury(IRI)is often identiﬁed as the underlying molecular insult leading to immediate poor lung function in the post-operative period,this injury encompasses several pathways of cellular injury in addition to the recruitment of the innate immune system to the site of injury to propagate this inflammatory *** is a central molecular inflammatory pathway that is the most signiﬁcant contributor to injury in this early post-operative *** is another form of pro-grammed cell death and is often associated with *** mitigation of pyroptosis in the early post-operative period following lung transplantation is a potential novel way to prevent poor allograft function and improve outcomes for all *** we detail the pyroptotic pathway,its importance in lung transplantation,and several therapeutic modalities that can mitigate this harmful inflammatory pathway.

关键词： lung transplantation pyroptosis ischemia reperfusion injury IRI ex vivo lung perfusion EVLP

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparative associations of non-alcoholic fatty liver disease and metabolic dysfunction-associated steatotic liver disease with risk of incident chronic kidney disease:a cohort study

引用

Hepatobiliary Surgery and Nutrition 2024年第5期13卷 801-813,I0003-I0005页

作者： Ji Hye Heo Mi Yeon lee Seong Hwan Kim Ming-hua Zheng Christopher D.Byrne Giovanni Targher Ki-Chul Sung Department of Internal Medicine Hallym University College of MedicineChuncheonRepublic of Korea Division of Biostatistics Department of R&D ManagementKangbuk Samsung HospitalSungkyunkwan University School of MedicineSeoulRepublic of Korea Division of Cardiology Department of Internal MedicineKorea University Ansan HospitalAnsanRepublic of Korea MAFLD Research Center Department of HepatologyThe First Affiliated Hospital of Wenzhou Medical UniversityWenzhouChina Wenzhou Key Laboratory of Hepatology WenzhouChina Institute of Hepatology Wenzhou Medical UniversityWenzhouChina Key Laboratory of Diagnosis and Treatment for the Development of Chronic Liver Disease in Zhejiang Province WenzhouChina Nutrition and Metabolism Faculty of MedicineUniversity of SouthamptonSouthamptonUK Southampton National Institute for Health and Care Research Biomedical Research CentreUniversity Hospital SouthamptonSouthamptonUK Metabolic Diseases Research Unit IRCCS Sacro Cuore-Don Calabria HospitalNegrar di ValpolicelleItaly Division of Cardiology Department of Internal MedicineKangbuk Samsung HospitalSungkyunkwan University School of MedicineSeoulRepublic of Korea

Background:We examined the comparative associations between non-alcoholic fatty liver disease(NAFLD)and metabolic dysfunction-associated steatotic liver disease(MASLD)definitions with risk of developing chronic kidney disease(CKD)and abnormal ***:We conducted a cohort study of 214,145 Korean adults with normal kidney function at baseline who underwent liver *** were further subdivided into no steatotic liver disease(no-SLD),NAFLD-only,MASLD-only,both NAFLD and MASLD,and SLD not categorized as NAFLD or MASLD *** proportional hazards models were used to analyze the risk of incident CKD and ***:Compared with either the no-NAFLD or no-MASLD groups,the NAFLD and MASLD groups were associated with a higher risk of incident CKD(NAFLD:adjusted hazard ratio(HR),1.18[95%CI,1.01-1.38];MASLD:adjusted HR,1.21[95%CI,1.04-1.39]).Among the five subgroups,both NAFLD and MASLD group had the strongest association with risk of incident CKD(adjusted HR,1.21[95%CI,1.04-1.42]).The MASLD-only group had the strongest association with incident abnormal albuminuria,with an adjusted HR comparable to that of the both NAFLD and MASLD group(adjusted HR 1.96[95%CI,1.44-2.67]for the MASLD-only,and adjusted HR 1.98[95%CI,1.58-2.49]for the both NAFLD and MASLD group versus the no-SLD group).The NAFLD-only group was not independently associated with risk of CKD or abnormal ***:These findings suggest that MASLD definition identifies individuals at high risk of developing incident CKD or abnormal albuminuria better than NAFLD definition.

关键词： Metabolic dysregulation non-alcoholic fatty liver disease(NAFLD) metabolic syndrome chronic kidney disease(CKD) albuminuria

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Color liquid crystal grating based color holographic 3D display system with large viewing angle

引用

Light(Science & Applications) 2024年第1期13卷 103-112页

作者： Di Wang Yi-Long Li Fan Chu Nan-Nan Li Zhao-Song Li Sin-Doo lee Zhong-Quan Nie Chao Liu Qiong-hua Wang School of Instrumentation and Optoelectronic Engineering Beihang UniversityBeijing 100191China State Key Laboratory of Virtual Reality Technology and Systems Beihang UniversityBeijing 100191China Display Technology Research Center Seoul National UniversityGwanak-ro 1Gwanak-guSeoul 08826Republic of Korea Key Lab of Advanced Transducers and Intelligent Control System Ministry of EducationTaiyuan University of TechnologyTaiyuan 030024China

Holographic 3D display is highly desirable for numerous applications ranging from medical treatments to military ***,it is challenging to simultaneously achieve large viewing angle and high-fidelity color reconstruction due to the intractable constraints of existing ***,we conceptually propose and experimentally demonstrate a simple and feasible pathway of using a well-designed color liquid crystal grating to overcome the inevitable chromatic aberration and enlarge the holographic viewing angle,thus enabling large-viewing-angle and color holographic 3D *** use of color liquid crystal grating allows performing secondary diffraction modulation on red,green and blue reproduced images simultaneously and extending the viewing angle in the holographic 3D display *** principle,a chromatic aberration-free hologram generation mechanism in combination with the color liquid crystal grating is proposed to pave the way for on such a superior holographic 3D *** proposed system shows a color viewing angle of~50.12°,which is about 7 times that of the traditional system with a single spatial light *** work presents a paradigm for achieving desirable holographic 3D display,and is expected to provide a new way for the wide application of holographic display.

关键词： holographic angle crystal

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：