检索结果-南通市图书馆

Characterization of lattice parameters gradient of Cu(In1-xGax)Se2 absorbing layer in thin-film solar cell by glancing incidence X-ray diffraction technique

引用

Journal of Materials Science & Technology 2020年第16期47卷 193-201页

作者： Yong-Il kim ki-Bok kim Miso kim Department of Nano Science University of Science and Technology217GajeongYuseongDaejeon34113Republic of Korea Korea Research Institute of Standards and Science 267GajeongYuseongDaejseon34113Republic of Korea

In or Ga gradients in the Cu(In1-xGax)Se2(CIGS)absorbing layer lead to change the lattice parameters of the absorbing layer,giving rise to the bandgap grading in the absorbing layer which is directly associated with the degree of absorbing ability of the CIGS solar *** tried to characterize the depth profile of the lattice parameters of the CIGS absorbing layer using a glancing incidence X-ray diffraction(GIXRD)technique,and then investigate the bandgap grading of the CIGS absorbing *** the glancing incident angle increased from 0.50 to 5.00°,the a and c lattice parameters of the CIGS absorbing layer gradually decreased from 5.7776(3)to 5.6905(2)?,and 11.3917(3)to 11.2114(2)?,*** depth profile of the lattice parameters as a function of the incident angle was consistent with vertical variation in the compositionof In or Ga with depth in the absorbing *** variation of the lattice parameters was due to the difference between the ionic radius of In and Ga co-occupying at the same crystallographic *** to the results of the depth profile of the refined parameters using GIXRD data,the bandgap of the CIGS absorber layer was graded over a range of 1.222-1.532 *** approach allows to determine the In or Ga gradients in the CIGS absorbing layer,and to nondestructively guess the bandgap depth profile through the refinement of the lattice parameters using GIXRD data on the assumption that the changes of the lattice parameters or unit-cell volume follow a good approximation to Vegard’s law.

关键词： Cu(In1-xGax)Se2 absorbing layer Depth profile Glancing incidence X-ray diffraction technique Bandgap grading Vegard’s law

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Implanting a preferential solid electrolyte interphase layer over anode electrode of lithium ion batteries for highly enhanced Li^+ diffusion properties

引用

Journal of Energy Chemistry 2020年第9期29卷 285-292,I0009页

作者： Ye Kyu kim Yoongon kim Jaejin bae Hyunwoo Ahn Yuseong Noh Hyunsu Han Won bae kim Department of Chemical Engineering Pohang University of Science and Technology(POSTECH)Nam-gu 37673PohangSouth Korea

The lithium-ion batteries are recognized as the most promising energy storage system,but it still does not meet the power requirements of electric vehicle batteries owing to low volumetric energy density with the traditional graphite electrode *** this study,we report the development of a novel electrode system fabricated by implantation of a solid electrolyte interphase(SEI)layer on the graphite *** SEI-implanted graphite electrode is made using a lithium bis(trifluoromethanesulfonyl)imide(LiTFSI)-based electrolyte and cycled with a lithium tetrafluoroborate LiBF4-based *** new electrode system shows significantly enhanced electrochemical properties owing to the rapid and efficient diffusion of Li ions through the SEI layer between the electrolyte and *** graphite electrode with its pre-formed SEI layer achieves a reversible capacity of 357 mAh g^-1 at 0.5 C after 50 cycles,which is significantly higher than that of commercial lithium-ion battery systems constructed with LiPF6(312mAh g^-1).The resulting unique electrode system could present a new avenue in SEI research for highperformance lithium-ion batteries.

关键词： SEI layer Graphite Implanting Li ion diffusion LiTFSI LiBF4 Artificial Mobility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A comparative study on serologic profiles of virus hepatitis B

引用

World Journal of Gastroenterology 2001年第1期7卷 107-110页

作者： BoYOUl Cho Moran ki Hung bae Park Department of Preventive Medicine Hanyang University College of Medicine Seoul 133791 Korea Department of Preventive Medicine Eulji University School of Medicine Taejon 301110 Korea

INTRODUCTIONHepatitis B viral infection, one of the most-prevalent liver disorders in China and Korea, is aserious infectious disease as it has the potential ofprogressing into liver cirrhosis and primary hepaticcarcinoma. China and Korea both belong to high-risk endemic regions of viral hepatitis[1]. TheHBsAg positive rates in China ranged from 6.9% -17.9% by age, race and test methods[2-5].

关键词： Adult Age Distribution Antibodies, Viral China Comparative Study Enzyme-Linked Immunosorbent Assay Ethnic Groups Female Hepatitis B Hepatitis B Surface Antigens Hepatitis B virus Humans Korea Male Middle Aged Research Support, Non-U.S. Gov't Seroepidemiologic Studies Sex Distribution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analysis of Finger Muscular Forces using a Wearable Hand Exoskeleton System

引用

Journal of Bionic Engineering 2017年第4期14卷 680-691页

作者： Suin kim Jeongsoo Lee Joonbum bae Department of Mechanical Engineering UNIST Ulsan Korea

In this paper, the finger muscular forces were estimated and analyzed through the application of inverse dynamics-based static optimization, and a hand exoskeleton system was designed to pull the fingers and measure the dynamics of the hand. To solve the static optimization, a muscular model of the hand flexors was derived. The experimental protocol was devised to analyze finger flexors in order to evaluate spasticity of the clenched fingers; muscular forces were estimated while the flexed fingers were extended by the exoskeleton with external loads applied. To measure the finger joint angles, the hand exoskeleton system was designed using four-bar linkage structure and potentiometers. In addition, the external loads to the fingertips were generated by cable driven actuators and simultaneously measured by loadcells which were located at each phalanx. The ex- periments were performed with a normal person and the muscular forces estimation results were discussed with reference to the physical phenomena.

关键词： hand rehabilitation wearable system bionic exoskeleton musculoskeletal model inverse dynamics static opti-mization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of reduction in area per pass on strain distribution and microstructure during caliber rolling in twinning-induced plasticity steel

引用

Journal of Iron and Steel Research International 2020年第1期27卷 62-74页

作者： Joong-ki Hwang Sung Jin kim School of Mechanical Engineering Tongmyong UniversityBusan 48520Republic of Korea Department of Advanced Materials Engineering Sunchon National UniversitySuncheon 57922Republic of Korea

The effects of reduction in area(RA)per pass during caliber rolling on microstructure and strain distribution of twinninginduced plasticity steel have been investigated to find solutions to make a more homogeneous material along the radial direction for wire rod *** steel wires subjected to an average RA per pass of 2.5%(skin pass caliber rolling)and 10.0%(conventional caliber rolling)were *** skin pass caliber-rolled wire was characterized as a duplex fiber texture of majorand minor.and the textures were almost same at/between center and surface area,which is totally different from those of conventional caliber rolling and wire *** skin pass caliber rolling led to more homogeneous microstructure and mechanical properties along the radial direction in comparison with the conventional caliber rolling and wire drawing due to the more homogeneous Hall-Petch hardening,dislocation hardening,and texture behavior with area,resulting in higher formability.

关键词： Twinning-induced plasticity steel Caliber rolling Deformation twin Reduction in area Skin pass

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cutoff characteristics of dielectric-filled circular holes embedded in dispersive plasmonic medium

引用

Chinese Optics Letters 2009年第10期7卷 904-908页

作者： ki Young kim Department of Physics National Cheng Kung University

The cutoff characteristics of dielectric-filled circular holes embedded in a dispersive plasmonic medium are investigated. Since two distinctive operating modes, surface plasmon polariton and circular waveguide modes, can exist in the slow and fast wave regions, respectively, the cutoff characteristics for each are separately investigated for linear and radial polarizations of the guided fields. As a result, the cutoff wavelengths for the linear and radial polarizations with very small subwavelength hole radii are found to be limited by the plasma resonance wavelength and plasma wavelength, which in turn are dependent and independent, respectively, of the dielectric constant of the dielectric filler material.

关键词： Circular waveguides Polarization Surface plasmon resonance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

DC Motor Speed Regulator via Active Damping Injection and Angular Acceleration Estimation Techniques

引用

IEEE/CAA Journal of Automatica Sinica 2021年第3期8卷 641-647页

作者： Seok-Kyoon kim Choon ki Ahn Department of Creative Convergence Engineering Hanbat National UniversityDaejeon 341-58Republic of Korea School of Electrical Engineering Korea UniversitySeoul 136-701Republic of Korea

This paper suggests a novel model-based nonlinear DC motor speed regulator without the use of a current *** current dynamics,machine parameters and mismatched load variations are *** proposed controller is designed to include an active damping term that regulates the motor speed in accordance with the first-order low-pass filter dynamics through the pole-zero ***,the angular acceleration and its reference are obtained from simple first-order estimators using only the speed *** effectiveness is experimentally verified using hardware comprising the QUBEServo2,myRIO-1900,and LabVIEW.

关键词： Active damping injection angular acceleration estimator DC motor(DCM) speed regulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In?uence of Carbon Equivalent Value on the Weld Bead Bending Properties of High-Strength Low-Alloy Steel Plates

引用

Journal of Materials Science & Technology 2017年第4期33卷 321-329页

作者： ki Hyuk kim In Jun Moon ki Won kim ki Bong Kang Byung Gyu Park Kwang Seok Lee R&D Center of Dongkuk Steel Mill Co. Ltd Pohang 790-729 South Korea Korea Institute of Materials Science Implementation Research Division Materials Deformation Department 797 Changwondaero Changwon Gyeongnarn642-831 South Korea

The contribution of chemical compositions in terms of carbon equivalent value（CEV） on impending crack propagation during weld bead bend tests（WBBTs） was studied with five different high-strength lowalloy steel plates that underwent different rolling processes. The test showed that cracks developed at the weld joint, easily passed through the coarse-grain heat-affected zone（CGHAZ）, and finally were arrested within the heat-affected zone（HAZ）. An apparent decrease in the average crack length, which consequently indicated improvement in crack arrestability, was found with decreasing CEV. In addition,the relatively fine microstructure in the HAZ of low-CEV steel plates helped in preventing the crack from further propagation. Special emphasis was placed on the empirical expectation of critical CEV above which WBBT might fail.

关键词： Mechanical characterization Steel Welding Fracture Crack arrestability against bending

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Seasonal Prediction of Monthly Precipitation in China Using Large-Scale Climate Indices

引用

Advances in Atmospheric Sciences 2010年第1期27卷 47-59页

作者： Maeng-ki kim Yeon-Hee kim Department of Atmospheric Science Kongju National University

In this study, seasonal predictions were applied to precipitation in China on a monthly basis based on a multivariate linear regression with an adaptive choice of predictors drawn from regularly updated climate indices with a two to twelve month lead time. A leave-one-out cross validation was applied to obtain hindcast skill at a 1% significance level. The skill of forecast models at a monthly scale and their significance levels were evaluated using Anomaly Correlation Coefficients （ACC） and Coefficients Of Determination （COD）. The monthly ACC skill ranged between 0.43 and 0.50 in Central China, 0.41-0.57 in East China, and 0.41 0.60 in South China. The dynamic link between large-scale climate indices with lead time and the precipitation in China is also discussed based on Singular Value Decomposition Analysis （SVDA） and Correlation Analysis （CA）.

关键词： seasonal prediction precipitation in China climate predictors climate index

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Corrosion characteristics of steel in seawater containing various chloride concentrations generated by electrochemical method

引用

中国有色金属学会会刊：英文版 2009年第B9期19卷 50-55页

作者： Seong-Jong kim Seok-ki JANG Division of Marine Engineering Mokpo Maritime University

The electro-clean system (ECS), a ballast water management system that eliminates harmful aquatic organisms in ship ballast water via electrochemically produced chloride, was developed. The current density for potentiostatic experiments subjected to seawater with an applied potential (-0.1 V) at various TRC concentrations (2×10-6, 6×10-6, 10×10-6, and 15×10-6) have similar results. The current density at -0.1 V has the highest value compared with that at -0.7 V and -0.4 V. For all concentrations, the current density increases with increasing applied potential.

关键词：含氯化物电化学方法腐蚀特性浓度海水船舶压载水钢铁电流密度

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：