检索结果-南通市图书馆

Degradation of o-dichlorobenzene by DBD-NTP co-modified titanium gel catalyst

Journal of Environmental Sciences 2024年第9期143卷 71-84页

作者： Wenbo Zhang yi Xing Wei Su Jiaqing Wang Haoqi Jia Yongkang Cui jing Chen hui Zhang School of Energy and Environmental Engineering University of Science and Technology BeijingBeijing 100083China Beijing Key Laboratory of Resource-oriented Treatment of Industrial Pollutants University of Science and Technology BeijingBeijing 100083China Guangdong Province Engineering Laboratory for Air Pollution Control Guangzhou 510530China College of Environmental and Resource Sciences Shanxi UniversityTaiyuan 030006China Sinosteel Maanshan Mine Research Institute Co.Ltd. Anhui 243071China

In order to study the degradation process of dioxins in industrial flue gas,the decomposition of o-dichlorobenzene(o-DCB)in a DBD plasma catalytic reactor was *** results showed that an NTP-catalyzed system,especially using the Cu Mn Ti Oxcatalyst,had better o-DCB degradation performance compared to plasma *** combination of the Cu Mn Ti Oxcatalyst with NTP can achieve a degradation efficiency of up to 97.2%for o-DCB;the selectivity of CO and CO_(2)and the carbon balance were 40%,45%,and 85%,*** dielectric constant and electrical property results indicated that the surface discharge capacity of the catalysts played a major role in the degradation of o-DCB,and a higher dielectric constant could suppress the plasma expansion and enhance the duration of the plasma discharge per discharge *** to the O1s XPS and O_(2)-TPD results,the conversion of CO to CO_(2)follows the M-v-K mechanism;thus,the active species on the catalyst surface play an important ***,the Cu Mn Ti Oxand NTP mixed system exhibited excellent stability,which is probably because Cu doping improved the lifetime of the *** work can provide an experimental and theoretical basis for research in the degradation of o-DCB by plasma catalyst systems.

关键词： o-dichlorobenzene(o-DCB) Non-thermal plasma catalysis Ozone concentration

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study of deep transportation and plugging performance of deformable gel particles in porous media

引用

Petroleum Science 2024年第2期21卷 962-973页

作者： Wen-jing Zhao jing Wang Zhong-Yang Qi hui-Qing Liu National Key Laboratory of Petroleum Resources and Engineering China University of PetroleumBeijing102249China MOE Key Laboratory of Petroleum Engineering China University of PetroleumBeijing102249China

Deformable gel particles(DGPs) possess the capability of deep profile control and flooding. However, the deep migration behavior and plugging mechanism along their path remain unclear. Breakage, an inevitable phenomenon during particle migration, significantly impacts the deep plugging effect. Due to the complexity of the process, few studies have been conducted on this subject. In this paper, we conducted DGP flow experiments using a physical model of a multi-point sandpack under various injection rates and particle sizes. Particle size and concentration tests were performed at each measurement point to investigate the transportation behavior of particles in the deep part of the reservoir. The residual resistance coefficient and concentration changes along the porous media were combined to analyze the plugging performance of DGPs. Furthermore, the particle breakage along their path was revealed by analyzing the changes in particle size along the way. A mathematical model of breakage and concentration changes along the path was established. The results showed that the passage after breakage is a significant migration behavior of particles in porous media. The particles were reduced to less than half of their initial size at the front of the porous media. Breakage is an essential reason for the continuous decreases in particle concentration, size, and residual resistance coefficient. However, the particles can remain in porous media after breakage and play a significant role in deep plugging. Higher injection rates or larger particle sizes resulted in faster breakage along the injection direction, higher degrees of breakage, and faster decreases in residual resistance coefficient along the path. These conditions also led to a weaker deep plugging ability. Smaller particles were more evenly retained along the path, but more particles flowed out of the porous media, resulting in a poor deep plugging effect. The particle size is a function of particle size before inject

关键词： Physical simulation Deformable gel particle Breakage Particle size Residual resistance coefficient

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Grain boundary engineering for enhancing intergranular damage resistance of ferritic/martensitic steel P92

引用

Nuclear Science and Techniques 2024年第5期35卷 186-199页

作者： Lei Peng Shang-Ming Chen jing-yi Shi Yong-Jie Sun yi-Fei Liu yin-Zhong Shen Hong-Ya He hui-Juan Wang Jie Tian State Key Laboratory of Particle Detection and Electronics University of Science and Technology of ChinaHefei 230026China School of Nuclear Science and Technology University of Science and Technology of ChinaHefei 230027China School of Materials Engineering Shanghai University of Engineering Science333 Long Teng RoadShanghai 201620China Experimental Center of Engineering and Material Science University of Science and Technology of ChinaHefei 230026China

Ferritic/martensitic(F/M)steel is widely used as a structural material in thermal and nuclear power ***,it is susceptible to intergranular damage,which is a critical issue,under service *** this study,to improve the resistance to intergranular damage of F/M steel,a thermomechanical process(TMP)was employed to achieve a grain boundary engineering(GBE)microstructure in F/M steel *** TMP,including cold-rolling thickness reduction of 6%,9%,and 12%,followed by austenitization at 1323 K for 40 min and tempering at 1053 K for 45 min,was applied to the as-received(AR)P92 *** prior austenite grain(PAG)size,prior austenite grain boundary character distribution(GBCD),and connectivity of prior austenite grain boundaries(PAGBs)were *** to the AR specimen,the PAG size did not change *** fraction of coincident site lattice boundaries(CSLBs,3≤Σ≤29)and Σ3^(n) boundaries along PAGBs decreased with increasing reduction ratio because the recrystallization fraction increased with increasing reduction *** PAGB connectivity of the 6%deformed specimen slightly deteriorated compared with that of the AR ***,potentiodynamic polarization studies revealed that the intergranular damage resistance of the studied steel could be improved by increasing the fraction of CSLBs along the PAGBs,indicating that the TMP,which involves low deformation,could enhance the intergranular damage resistance.

关键词： Grain boundary engineering Ferritic/martensitic steel Prior austenite grain boundary character distribution Grain boundary connectivity Intergranular damage resistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synergy of phosphorus vacancies and build-in electric field into NiCo/NiCoP Mott-Schottky integrated electrode for enhanced water splitting performance

引用

Chinese Chemical Letters 2024年第2期35卷 604-610页

作者： Xiaochen Zhang hui Xue jing Sun Niankun Guo Tianshan Song Jiawen Sun yi-Ru Hao Qin Wang College of Chemistry and Chemical Engineering Inner Mongolia UniversityHohhot 010021China

Vacancy engineering and Mott-Schottky heterostructure can accelerate charge transfer,regulate adsorption energy of reaction intermediates,and provide additional active sites,which are regarded as valid means for improving catalytic ***,the underlying mechanism of synergistic regulation of interfacial charge transfer and optimization of electrocatalytic activity by combining vacancy and Mott-Schottky junction remains ***,the growth of a bifunctional NiCo/NiCoP Mott-Schottky electrode with abundant phosphorus vacancies on foam nickel(NF)has been synthesized through continuous phosphating and reduction *** obtained NiCo/NiCoP heterojunctions show remarkable OER and HER activities,and the overpotentials for OER and HER are as low as 117 and 60 mV at 10 mA/cm^(2) in 1 mol/L KOH,***,as both the cathode and anode of overall water splitting,the voltage of the bifunctional NiCo/NiCoP electrocatalyst is 1.44 V at 10 mA/cm^(2),which are far exceeding the benchmark commercial *** theoretical calculation results confirm that the phosphorus vacancies and build-in electric field can effectively accelerate ion and electron transfer between NiCo alloy and NiCoP semiconductor,tailor the electronic structure of the metal centers and lower the Gibbs free energy of the ***,the unique self-supported integrated structure is beneficial to facilitate the exposure of the active site,avoid catalyst shedding,thus improving the activity and structural stability of NiCo/*** study provides an avenue for the controllable synthesis and performance optimization of Mott-Schottky electrocatalysts.

关键词： Mott-Schottky Build-in electric field Phosphorus vacancies Phosphides Overall water splitting

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of CONTHAC-3D and hydrogen distribution analysis of HPR1000

引用

Nuclear Science and Techniques 2024年第2期35卷 210-221页

作者： hui Wang jing-jing Li Yuan Chang Gong-Lin Li Ming Ding China Nuclear Power Engineering Co.LTD. Beijing 100084China Fundamental Science on Nuclear Safety and Simulation Technology Laboratory Harbin 100049China

An in-house code,CONTHAC-3D,was developed to calculate and analyze thermal-hydraulic phenomena in containments during severe ***-3D is a three-dimensional computational fluid dynamics code that can be applied to predict gas flow,diffusion,and steam condensation in a containment during a severe hypothetical accident,as well as to obtain an estimate of the local hydrogen concentration in various zones of the ***-3D was developed using multiple models to simulate the features of the proprietary systems and equipment of HPR1000 and ACP100,such as the passive cooling system,passive autocatalytic recombiners and the passive air cooling *** validate CONTHAC-3D,a GX6 test was performed at the Battelle Model Containment *** hydrogen concentration and temperature monitored by the GX6 test are accurately predicted by ***,the hydrogen distribution in the HPR1000 containment during a severe accident was *** results show that the hydrogen removal rates calculated using CONTHAC-3D for different types of PARs agree well with the theoretical values,with an error of less than 1%.As the accident progresses,the hydrogen concentration in the lower compartment becomes higher than that in the large space,which implies that the lower compartment has a higher hydrogen risk than the dome and large space at a later stage of the *** amount of hydrogen removed by the PARs placed on the floor of the compartment is small;therefore,raising the installation height of these recombiners appropriately is ***,we do not recommend installing all autocatalytic recombiners at high *** study findings in regard to the hydrogen distribution in the HPR1000 containment indicate that CONTHAC-3D can be applied to the study of hydrogen risk containment.

关键词： Hydrogen risk mitigation Pressurized water reactor HPR1000 Thermal hydraulic CONTHAC-3D

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

N-Heterocyclic carbene-catalyzed enantioselective(dynamic) kinetic resolutions and desymmetrizations

引用

Science China Chemistry 2024年第2期67卷 482-511页

作者： yi Zhang hui Cai Xiuhai Gan Zhichao Jin National Key Laboratory of Green Pesticide Key Laboratory of Green Pesticide and Agricultural BioengineeringMinistry of EducationGuizhou UniversityHuaxi DistrictGuiyang550025China

N-heterocyclic carbene-catalyzed enantioselective kinetic resolutions,dynamic kinetic resolutions,and desymmetrization reactions are systematically *** content is organized according to the activation modes involved i... 详细信息

关键词： N-heterocyclic carbene kinetic resolution dynamic kinetic resolution desymmetrization organocatalysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A simple route for preparation of TRIP-assisted Si-Mn steel with excellent performance using direct strip casting

引用

International Journal of Minerals,Metallurgy and Materials 2024年第10期31卷 2173-2181页

作者： hui Xu Lejun Zhou Wanlin Wang Yang yi School of Metallurgy and Environment Central South UniversityChangsha 410083China National Center for International Research of Clean Metallurgy Central South UniversityChangsha 410083China

The complex producing procedures and high energy-consuming limit the large-scale production and application of advanced high-strength steels(AHSSs).In this study,the direct strip casting(DSC)technology with unique sub-rapid solidification characteristics and cost advantages was applied to the production of low-alloy Si-Mn steel with the help of quenching&partitioning(Q&P)concept to address these *** this method with the conventional compact strip production(CSP)process,the initial microstructure formed under different solidification conditions and the influence of heat treatment processes on the final mechanical properties were *** results show that the initial structure of the DSC sample is a dual-phase structure composed of fine lath martensite and bainite,while the initial structure of the CSP sample consists of pearlite and *** volume fraction and carbon content of retained austenite(RA)in DSC samples are usually higher than those in CSP samples after the same Q&P *** samples typically demonstrate better comprehensive mechanical properties than the CSP *** DSC sample partitioned at 300℃ for 300 s(DSC-Pt300)achieves the best comprehensive mechanical properties,with yield strength(YS)of 1282 MPa,ultimate tensile strength(UTS)of 1501 MPa,total elongation(TE)of 21.5%,and product of strength and elongation(PSE)as high as 32.3 GPa·%.These results indicate that the excellent mechanical properties in low-alloy Si-Mn steel can be obtained through a simple process(DSC-Q&P),which also demonstrates the superiority of DSC technology in manufacturing AHSSs.

关键词： direct strip casting sub-rapid solidification quenching and partitioning TRIP-assisted AHSSs microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Insights into in-situ imbibition behavior of fracturing fluid in propped shale fractures based on nuclear magnetic resonance:A case study from Longmaxi Formation shale,Sichuan Basin,China

引用

Petroleum Science 2024年第1期21卷 410-429页

作者： jing-jing Guo Kai-Xiang Di Lie-hui Zhang Yu-Long Zhao hui-ying Tang Rui-Han Zhang Ye Tian National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500SichuanChina

Shale gas is an important component of unconventional oil and gas *** the imbibition behavior is helpful to optimize flowback parameters and enhance gas *** imbibition studies have focused on shale matrix,and the pressure conditions discussed were mostly *** initial imbibition behavior begins from propped fractures to matrix,but there are few studies working on explaining the imbibition behavior in propped fractures or the phenomenon of many shale wells exhibit higher productivity after a“soaking”***,propped fracture samples were designed for imbibition and migration *** order to accurately study the mechanism and main influencing factors of fracturing fluid imbibition and migration in propped and unpropped shale fractures under high temperature and high pressure,a series of experiments based on nuclear magnetic resonance(NMR)were carried *** showed that NMR T_(2) spectra of all samples exhibited a bimodal *** final imbibition volume of fracturing fluid was positively related to pressure and fracture *** imbibition effect of fracturing fluid was more evident in matrix pores under high *** the migration during soaking stage,the fracturing fluid gradually migrated from large pores to small pores and gradually displaced the shale gas from the matrix,thus allowing the water blocking in propped fractures to self-unlock to some *** permeability decreased in the imbibition stage,while it recovered in the migration stage to some extent.

关键词： Forced imbibition Migration Soaking NMR T_(2)spectra Propped fracture Permeability recovery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Vanadium(V) Complexes Containing Unsymmetrical N-Heterocyclic Carbene Ligands: Highly Efficient Synthesis and Catalytic Behavior towards Ethylene/Propylene Copolymerization

引用

Chinese Journal of Polymer Science 2024年第1期42卷 32-41,I0006页

作者： yi-Cong Wang hui Zhat Pei-yi Cheng Shu Zhang Xiang-Wei Liu yi-Xian Wu State Key Laboratory of Chemical Resource Engineering Beijing University of Chemical TechnologyBejing 100029China

The highly efficient method has been developed for the synthesis of NHC·VOCl_(3) containing symmetrical or unsymmetrical Nheterocyclic carbene(NHC) ligands by the transmetallation reaction of NHC·AgCl with VOCl_(3).The total isolated yield of VOCl_(3)[1,3-(2,4,6-Me_(3)C_(6)H_(2))_(2)(NCH=)_(2)C:](V4') reached 86% by transmetallation reaction,which is much higher than that(48%) by direct coordination *** methodology has also been used to synthesize the novel vanadium complexes containing unsymmetrical NHC ligands of VOCl_(3)[PhCH_(2)NCH=CHNR)C:](V5',R=2,4,6-Me_(3)C_(6)H_(2);V6',R=2,4-Me_(2)-6-Ph-C_(6)H_(2);V7',R=2,6-^(i)Pr_(2)-C_(6)H_(3)) with high yield,which could not be obtained by direct coordination *** catalytic activity and copolymerization ability would be improved by introducing unsymmetrical NHC ligands due to their less steric bulky *** vanadium complex V5' containing unsymmetrical NHC ligand exhibits higher catalytic activity(3.7×10^(5)g_(copolymer)·mol^(-1) of V·h^(-1)) than that of V4' containing symmetrical NHC ***,the higher propylene incorporation ratio(45.6 mol%) in the copolymers of ethylene with propylene could be obtained by using V5' than that(39.9%) by using V4'.The results would provide a highly efficient strategy for the synthesis of early transition metal complexes containing versitile NHC ligands,affording the catalyst with both high catalytic activity and copolymerization ability for the synthesis of high performance polyolefin elastomers.

关键词： Vanadium complex N-heterocyclic carbene ligand Transmetallation reaction Copolymerization of ethylene with propylene

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Electrochemical Analysis of Single Glucose Oxidase with a Nanopipette

引用

Chemical Research in Chinese Universities 2024年第2期40卷 272-278页

作者： WANG Yongyong MA hui LONG yi-Tao yiNG yi-Lun School of Chemistry and Chemical Engineering Molecular Sensing and Imaging Center(MSIC)Nanjing UniversityNanjing210023P.R.China

Nanopore-based electrochemical technique is a promising tool for detecting single ***,detecting single proteins using a nanopipette in their native state without labeling is challenging due to the rapid translocation,which results in an inefficient signal *** our study,we finely tuned the driving force equilibrium between electrophoretic force(EPF)and electroosmotic flow(EOF)inside the nanopipette for efficient sensing of single glucose oxidase(GOD)*** duration time of GOD within the nanopipette is extended to about 4 *** strategy provided clear ionic current signals with a signal-to-noise ratio of *** EPF increased in the direction opposite to the motion of GOD,we observed a nonlinear growth in GOD’s duration *** extended the duration to about 4.4 times longer at−1000 mV compared to at−800 ***,nanopore-based electrochemical sensing could be used for single GOD molecule analysis as an ultrasensitive method.

关键词： Nanopore Single-molecule analysis Glucose oxidase Electrophoretic force Electroosmotic flow

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：