检索结果-南通市图书馆

Engineering Microbiology 2024年第3期4卷 1-15页

作者： I.C.Cunha-Ferreira C.S.Vizzotto T.D.Frederico j.Peixoto L.S Carvalho M.r.Tótola r.H.Krüger Laboratory of Enzymology Department of Cellular BiologyUniversity of Brasília(UNB)Brasília70910-900Brazil Laboratory of Environmental Sanitation Department of Civil and Environmental EngineeringUniversity of Brasília(UNB)Brasília70910-900Brazil Laboratório de Biotecnologia e Biodiversidade para o Meio Ambiente Universidade Federal de Viçosa(UFV)Viçosa36570-900Brazil

The biotechnological industry faces a crucial demand for novel bioactive compounds,particularly antimicrobial agents,to address the rising challenge of bacterial resistance to current available *** strate-gies for cultivating naturally occurring microorganisms often limit the discovery of novel antimicrobial *** study presents a protocol for targeted selection of bacterial strains using the supernatant of Paenibacillus el-gii,which produces abundant signal molecules and antimicrobial *** samples were inoculated in these enriched culture media to selectively cultivate bacteria resistant to the supernatant,indicating their potential to produce similar *** bacterial strains isolated through this method were assessed for their antibac-terial *** addition,the functional annotation of the genome of one of these strains revealed several gene clusters of biotechnological *** study highlights the effectiveness of using this approach for selective cultivation of microorganisms with potential for biotechnological applications.

关键词： Prospecting Supernatant Antibacterial activity

Analysis of mid-spatial frequency wavefront distortions from a liquid-cooled flash-lamp pumped Nd:phosphate laser amplifier

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第1期12卷 24-29页

作者： Pierre-Marie Dalbies Sandy Cavaro Edouard Bordenave Nathalie Blanchot julien G.Moreau jérôme Neauport CEA CESTA Le BarpFrance

Mid-spatial frequency wavefront deformation can be deleterious for the operation of high-energy laser systems. When fluid cooled high-repetition-rate amplifiers are used, the coolant flow is likely to induce such detrimental mid-spatial frequency wavefront deformations. Here, we describe the design and performance of a 90 mm × 90 mm aperture, liquid-cooled Nd:phosphate split-slab laser amplifier pumped by flash-lamps. The performance of the system is evaluated in terms of wavefront aberration and gain at repetition rates down to 1 shot per minute. The results show that this single cooled split-slab system exhibits low wavefront distortions in the medium to large period range, compatible with a focus on target, and despite the use of liquid coolant traversed by both pump and amplified wavelengths. This makes it a potential candidate for applications in large high-energy laser facilities.

关键词： flash-lamp pumping high-power laser laser cooling neodymium glass wavefront error

Structural changes in the obese brain

在线全文

学校读者我要写书评

暂无评论

Neural regeneration research 2024年第12期19卷 2561-2562页

作者： Anna r.r.Da Conceicao Marcelo N.N.Vieira Fernanda G.De Felice D’Or Institute for research and Education Rio de JaneiroBrazil Institute of Medical Biochemistry Leopoldo De Meis Federal University of Rio de JaneiroRio de JaneiroBrazil Centre for Neuroscience Studies Department of Biomedical and Molecular Sciences&Department of PsychiatryQueen’s UniversityKingstonONCanada

Obesity represents a major global health concern,with widespread growing prevalence and severe consequences for the quality of life and life expectancy of affected individuals and for the economic burden of healthcare systems(Prospective Studies Collaboration,2009).Obesity is a well-established risk factor for a variety of conditions including metabolic,vascula r,and heart diseases,and seve ral types of cancer(Prospective Studies Collaboration,2009).

关键词： diseases consequences prevalence

Impact of welding equipment on power quality

在线全文

学校读者我要写书评

暂无评论

China Welding 2024年第3期33卷 44-51页

作者： Kovács Attila Molnár judit jármai Károly Institute of Physics and Electrical Engineering Department of Electrical and Electronic Engineering Institutional DepartmentUniversity of MiskolcMiskolc H3515Hungary Institute of Energy and Chemical Engineering University of MiskolcMiskolc H3515Hungary

In an industrial facility,many electrical consumers can affect the quality of ***,the freedom from interference sources of these devices and equipment can be crucial for quality and uninterrupted electricity *** welding equipment is also a possible source of *** electrical harmonic injections created by welding equipment into the electrical network can affect the operation of other consumers connected to the given distribution points and cause unjustified overheating and shutdowns of some network *** aim of the research is to analyse the current harmonic injection of welding equipment of different types and modes of operation connected to the internal distribution network of the industrial *** effectiveness of the active harmonic filter built into the welding equipment was also examined in the *** results showed that the built-in active harmonic filter of the DC045 laser welding equipment was ineffective because the total harmonic distortion(THD)was about three times the 8%allowed by IEEE 519−2022 *** current harmonic injection of MIG 320 and MM403 type welding equipment was more than five times the permissible value of 5%.The current harmonic distortion of the PLAS140 type plasma-jet cutter equipment was below the 5% value allowed in the standard,thus it complied with *** on the measurement results,it can be concluded that the use of protection against harmonics is also necessary for welding ***,proposals were made in the paper to reduce the effect of harmonics.

关键词： electrical transients harmonic distortion electrical network disturbances voltage breaks total harmonic distortion(THD)

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： M.P.SALAIMANIMAGUDAM j.jAYAPrAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

Error field penetration in j-TEXT tokamak based on two-fluid drift-MHD model

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第4期33卷 545-551页

作者：王文徐涛张仪 the j-TEXT team State Key Laboratory of Advanced Electromagnetic Technology International Joint Research Laboratory of Magnetic Confinement Fusion and Plasma PhysicsSchool of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

An externally generated resonant magnetic perturbation can induce complex non-ideal MHD responses in their resonant *** have studied the plasma responses using Fitzpatrick's improved two-fluid model and program *** calculated the error field penetration threshold for *** addition,we find that the island width increases slightly as the error field amplitude increases when the error field amplitude is below the critical penetration ***,the island width suddenly jumps to a large value because the shielding effect of the plasma against the error field disappears after the *** scanning the natural mode frequency,we find that the shielding effect of the plasma decreases as the natural mode frequency ***,we obtain the m/n=2/1 penetration threshold scaling on density and temperature.

关键词： plasma responses drift-MHD model error field penetration

Low-Cost and Biodegradable Thermoelectric Devices Based on van der Waals Semiconductors on Paper Substrates

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第1期7卷 201-206页

作者： Gulsum Ersu Carmen Munuera Federico j.Mompean Daniel Vaquero jorge Quereda joão Elias F.S.rodrigues jose A.Alonso Eduardo Flores jose r.Ares Isabel j.Ferrer Abdullah M.Al-Enizi Ayman Nafady Sruthi Kuriakose joshua O.Island Andres Castellanos-Gomez Materials Science Factory Instituto de Ciencia de Materiales de Madrid(ICMM-CSIC)Madrid E-28049Spain Nanotechnology Group USAL-NanolabUnivesidad de SalamancaSalamanca Junta de Castilla y León 37007Spain GISC Departamento de Física de MaterialesUniversidad Complutense de MadridMadrid E-28040Spain Departamento de Física Aplicada Centro de Investigación y Estudios AvanzadosMérida 97310Mexico MIrE Group Departamento de Física de MaterialesUniversidad Autónoma de MadridMadrid E-28049Spain Instituto Nicolás Cabrera Universidad Autónoma de MadridMadrid E-28049Spain Department of Chemistry College of ScienceKing Saud UniversityRiyadh 11451Saudi Arabia Department of Physics and Astronomy University of Nevada Las VegasLas Vegas NV 89154USA

We present a method to fabricate handcrafted thermoelectric devices on standard office paper *** devices are based on thin films of WS_(2),Te,and BP(P-type semiconductors)and TiS_(3)and TiS_(2)(N-type semiconductors),deposited by simply rubbing powder of these materials against *** thermoelectric properties of these semiconducting films revealed maximum Seebeck coefficients of(+1.32±0.27)mV K^(-1)and(-0.82±0.15)mV K^(-1)for WS_(2)and TiS_(3),***,Peltier elements were fabricated by interconnecting the P-and N-type films with graphite electrodes.A thermopower value up to 6.11 mV K^(-1)was obtained when the Peltier element were constructed with three *** findings of this work show proof-of-concept devices to illustrate the potential application of semiconducting van der Waals materials in future thermoelectric power generation as well as temperature sensing for low-cost disposable electronic devices.

关键词： paper-based electronics Seebeck effect semiconductors thermoelectrics van der Waals materials

reply to the note by Li Piani et al.

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 603-606页

作者： T.Li Piani j.Weerheijm L.j.Sluys TU Delft Stevinweg 12628 CNDelftthe Netherlands TNO PO Box 452280 AARijswijkthe Netherlands NLDA Faculty of Military Sciences1781 CADen Helderthe Netherlands

In 2017,a ballistic phenomenological model was proposed by the authors of ref.[1] to numerically simulate the experimental depths of small caliber projectiles impacting walls made of *** opportunity for a new model in the field revealed from the observation that two older models recently used by the authors of ref.[2] shared a linear relationship between the penetration depth P and the impacting velocity v_(O).

关键词： Penetration Adobe Modeling

In vivo and in vitro study of resorbable magnesium wires for medical implants:Mg purity,surface quality,Zn alloying and polymer coating

在线全文

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第6期12卷 2472-2488页

作者： K.Tesar j.Luňácková M.jex M.Žaloudková r.Vrbová M.Bartoš P.Klein L.Vištejnová j.Dušková E.Filová Z.Sucharda M.Steinerová S.Habr K.Balík A.Singh Department of Materials Faculty of Nuclear Sciences and Physical EngineeringCzech Technical University in PragueTrojanova 13Prague 12000Czech Republic Institute of Physics Czech Academy of SciencesNa Slovance 2Prague 18221Czech Republic Institute of Dental Medicine First Faculty of MedicineCharles University and General University Hospital in PragueKaterinská32Prague 12801Czech Republic Department of Physics Faculty of Nuclear Sciences and Physical EngineeringCzech Technical University in PragueBrehová7Prague 11519Czech Republic Department of Composites and Carbon Materials Institute of Rock Structure and MechanicsCzech Academy of SciencesV Holešovickách 41Prague 18209Czech Republic Institute of Anatomy First Faculty of MedicineCharles UniversityU Nemocnice 3Prague 12800Czech Republic Biomedical Center Faculty of Medicine in PilsenCharles UniversityAlej Svobody 76Pilsen 32300Czech Republic Department of Pathological Physiology Faculty of Medicine in PilsenCharles UniversityAlej Svobody 7632300 PilsenCzech Republic Department of Histology and Embryology Faculty of Medicine in PilsenCharles UniversityAlej Svobody 7632300 PilsenCzech Republic Institute of Pathology First Faculty of MedicineCharles University and General University Hospital in PragueStudnickova 2Prague 12800Czech Republic Department of Biomaterials and Tissue Engineering Institute of PhysiologyCzech Academy of SciencesVidenska 1083Prague 14200Czech Republic research Center for Structural Materials National Institute for Materials Science1-2-1 SengenTsukuba 305-0047Japan

Magnesium is an excellent material in terms of biocompatibility and its corrosion products can serve as an active source for new bone ***,localized corrosion and H_(2)generation limit the potential of Mg-based *** low-alloyed Mg-Zn wires can strongly reduce problems with large H_(2)bubbles and improve the mechanical properties considerably while maintaining excellent long-term *** pickling and a polymer coating can be effectively used to lower the rate of in vivo *** this work,microstructural,mechanical,and in vitro characterization of 250μm and 300μm extruded wires made from ultra-pure Mg,commercially pure Mg,Mg-0.15Zn,Mg-0.4Zn and Mg-1Zn was ***,Mg-0.4Zn wires together with a variant coated with a copolymer of L-lactide andε-caprolactone were tested in vivo on artificially damaged Wistar rat *** on the observed Mg-induced osteogenesis,polymer-coated Mg wires with a small addition of Zn are a perspective material for bone-support applications,such as cerclage and fixation wires.

关键词： Magnesium resorbable Mg wire Mg-Zn implant degradation Biocompatibility study Zn grain boundary segregation

Wettability,reactivity,and interface structure in Mg/Ni system

在线全文

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第2期12卷 659-672页

作者： S.Terlicka N.Sobczak Ł.Maj P.Darłak j.j.Sobczak Institute of Metallurgy and Materials Science Polish Academy of Sciences25 Reymonta Str.KrakowPoland Faculty of Foundry Engineering AGH University23 Reymonta Str.KrakowPoland

The sessile drop method was applied to the experimental investigation of the wetting and spreading behaviors of liquid Mg drops on pure Ni *** comparison,the experiments were performed in two variants:(1)using the Capillary Purification(CP)procedure,which allows the non-contact heating and squeezing of a pure oxide-free Mg drop;(2)by classical Contact Heating(CH)*** high-temperature tests were performed under isothermal conditions(CP:760℃for 30 s;CH:715℃for 300 s)using Ar+5 wt%H_(2) *** the sessile drop tests,images of the Mg/Ni couples were recorded by CCD cameras(57 fps),which were then applied to calculate the contact angles of metal/substrate *** and transmission electron microscopy analyses,both coupled with energy-dispersive X-ray spectroscopy,were used for detailed structural characterization of the solidified *** was found that an oxide-free Mg drop obtained by the CP procedure showed a wetting phenomenon on the Ni substrate(an average contact angleθreading and good wetting over the Ni substrate(θ_((CP))~20°in 5 s)to form a final contact angle ofθ_(f(CP))~18°.In contrast,a different wetting behavior was observed for the CH procedure,where the unavoidable primary oxide film on the Mg surface blocked the spreading of liquid Mg showing apparently non-wetting behavior after 300 s contact at the test ***,in both cases,the deep craters formed in the Ni substrates under the Mg drops and significant change in the structure of initially pure Mg drops to Mg-Ni alloys suggest a strong dissolution of Ni in liquid Mg and apparent values of the final contact angles measured for the Mg/Ni system.

关键词： Magnesium-based alloys Sessile drop tests Capillary purification procedure Wettability reactivity Contact angle