检索结果-南通市图书馆

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 947-962页

作者： n.IQBAL j.CHOI S.f.SHAH C.LEE S.LEE Department of Mechanical Roboticsand Energy EngineeringDongguk University-SeoulSeoul 04620Republic of Korea

A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline ni-rich LinixMnyCo_(z)O_(2)(x≥0.8)(nMC)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary nMC particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more ***,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress *** paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of nMC active particles mitigates stress levels.

关键词： lithium-ion battery(LIB) polycrystalline particle coating finite element simulation ni-rich LinixMnyCo_(z)O_(2)(x>0.8)(nMC)

Characterization of bright betatron radiation generated by direct laser acceleration of electrons in plasma of near critical density

在线全文

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第2期9卷 26-35页

作者： j.Cikhardt M.Gyrdymov S.Zähter P.Tavana M.M.Günther n.Bukharskii n.Borisenko j.jacoby X.f.Shen A.Pukhov n.E.Andreev O.n.Rosmej faculty of Electrical Engineering Czech Technical University in Prague16627 Prague 6Czech Republic Goethe University FrankfurtMax-von-Laue-Straße 160438 Frankfurt am MainGermany GSI Helmholtzzentrum für Schwerionenforschung GmbH Planckstraße 164291 DarmstadtGermany focused Energy GmbH Im Tiefen See 4564293 DarmstadtGermany national Research nuclear University MEPhI Kashirskoe shosse 31115409 MoscowRussian Federation Lebedev Physical Institute RAS Leninskiy Prospekt 53119991 MoscowRussian Federation Heinrich-Heine-University Düsseldorf Universitätsstrasse 1DüsseldorfGermany joint Institute for High Temperatures RASIzhorskaya st.13Bldg.2125412 MoscowRussian Federation Moscow Institute of Physics and Technology Institutskiy Pereulok 9141700 DolgoprudnyRussia

Directed x-rays produced in the interaction of sub-picosecond laser pulses of moderate relativistic intensity with plasma of near-critical density are investigated. Synchrotron-like (betatron) radiation occurs in the process of direct laser acceleration (DLA) of electrons in a relativisticlaser channel when the electrons undergo transverse betatron oscillations in self-generated quasi-static electric and magnetic fields. In anexperiment at the PHELIX laser system, high-current directed beams of DLA electrons with a mean energy ten times higher than the ponderomotive potential and maximum energy up to 100 MeV were measured at 10^(19) W/cm^(2)laser intensity. The spectrum of directed x-raysin the range of 5–60 keV was evaluated using two sets of Ross filters placed at 0°and 10°to the laser pulse propagation axis. The differential x-ray absorption method allowed for absolute measurements of the angular-dependent photon fluence. We report 10^(13) photons/sr withenergies >5 keV measured at 0°to the laser axis and a brilliance of 10^(21) photons s^(−1) mm^(−2) mrad−2(0.1%BW)−1. The angular distributionof the emission has an fWHM of 14°–16°. Thanks to the ultra-high photon fluence, point-like radiation source, and ultra-short emissiontime, DLA-based keV backlighters are promising for various applications in high-energy-density research with kilojoule petawatt-class laserfacilities.

关键词： laser acceleration critical

Phase composition,conductivity,and sensor properties of cerium-doped indium oxide

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

nano Materials Science 2024年第2期6卷 193-200页

作者： M.I.Ikim G.n.Gerasimov V.f.Gromov O.j.Ilegbusi L.I.Trakhtenberg n.n.Semenov federal Research Center for Chemical Physics of RAS MoscowRussia University of Central florida OrlandoFLUSA Moscow Institute of Physics and Technology(State University) DolgoprudnyMoscow RegionRussia Lomonosov Moscow State University MoscowRussia

The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these *** the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2).

关键词： Cerium oxide Indium oxide nanocomposite Hydrothermal method Cubic phase Rhombohedral phase Sensor response Conductivity Hydrogen Response/recovery time

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

在线全文

学校读者我要写书评

暂无评论

journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： Y.B.Zhang S.j.Song f.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPfE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MnCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MnCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

Wettability,reactivity,and interface structure in Mg/ni system

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第2期12卷 659-672页

作者： S.Terlicka n.Sobczak Ł.Maj P.Darłak j.j.Sobczak Institute of Metallurgy and Materials Science Polish Academy of Sciences25 Reymonta Str.KrakowPoland faculty of foundry Engineering AGH University23 Reymonta Str.KrakowPoland

The sessile drop method was applied to the experimental investigation of the wetting and spreading behaviors of liquid Mg drops on pure ni *** comparison,the experiments were performed in two variants:(1)using the Capillary Purification(CP)procedure,which allows the non-contact heating and squeezing of a pure oxide-free Mg drop;(2)by classical Contact Heating(CH)*** high-temperature tests were performed under isothermal conditions(CP:760℃for 30 s;CH:715℃for 300 s)using Ar+5 wt%H_(2) *** the sessile drop tests,images of the Mg/ni couples were recorded by CCD cameras(57 fps),which were then applied to calculate the contact angles of metal/substrate *** and transmission electron microscopy analyses,both coupled with energy-dispersive X-ray spectroscopy,were used for detailed structural characterization of the solidified *** was found that an oxide-free Mg drop obtained by the CP procedure showed a wetting phenomenon on the ni substrate(an average contact angleθnfollowed by fast spreading and good wetting over the ni substrate(θ_((CP))~20°in 5 s)to form a final contact angle ofθ_(f(CP))~18°.In contrast,a different wetting behavior was observed for the CH procedure,where the unavoidable primary oxide film on the Mg surface blocked the spreading of liquid Mg showing apparently non-wetting behavior after 300 s contact at the test ***,in both cases,the deep craters formed in the ni substrates under the Mg drops and significant change in the structure of initially pure Mg drops to Mg-ni alloys suggest a strong dissolution of ni in liquid Mg and apparent values of the final contact angles measured for the Mg/ni system.

关键词： Magnesium-based alloys Sessile drop tests Capillary purification procedure Wettability Reactivity Contact angle

On the analytical solution of transient friction in channel flows

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第8期45卷 1447-1466页

作者： f.j.GARCíA-GARCíA P.fARInAS-ALVARInO Department of naval&Industrial Engineering Polytechnic School of EngineeringUniversity of A CorunaCampus Industrial de FerrolFerrol 15403A CorunaSpain Integraciones Técnicas de Seguridad S.A.Pol.Ind.Espiritu SantoC/Nobel15Cambre 15650A CorunaSpain

The transient friction in channel mean flows is the sum of two contributions,i.e.,the underlying laminar flow(ULf)and the purely turbulent component(PTC),and the contributions are analyzed separately by theoretical *** is found that,the transient friction may be higher or remarkably lower than that in equal-Reynolds number steady-state *** universal time constant for plane-parallel laminar flows is reported,and the role of the time constant in a turbulent mean flow is *** is shown that the time constant is related to the turbulence's frozen ***,a study of the logarithmic layer during the transient flow is accomplished,which shows that the logarithmic layer is destroyed.

关键词： transient friction transient flow unsteady channel flow

Inflow and outflow permeability tests in a very soft clay under low stresses

在线全文

学校读者我要写书评

暂无评论

journal of Rock Mechanics and Geotechnical Engineering 2024年第8期16卷 3270-3283页

作者： j.W.S.Vargas f.A.B.Danziger f.R.Lopes T.Lunne federal University of Rio de j.neiro Rio de JaneiroBrazil norwegian Geotechnical Institute OsloNorway

In situ inflow and outflow permeability tests with the BAT probe at SarapuíII soft clay test site are presented.A description of the BAT permeability test is provided,discussing its advantages and shortcomings,especially in the case of very soft clays under low *** pressures were monitored during probe installation and were found to be slightly lower than piezocone u2 pore pressures,consistent with the position of the *** role of filter tip saturation was investigated after the usual saturation procedure provided an unsatisfactory pore pressure response during probe *** show that the vacuum saturation procedure provides adequate response during installation and increases the reliability of the coefficient of permeability determination in early *** inflow and outflow tests yielded similar results,indicating that careful execution of the test can lead to good test repeatability regardless of the loading *** sequences of alternated inflow and outflow tests have yielded similar results,indicating that soil reconsolidation and filter clogging were negligible in the tests *** are presented concerning the relationship between index parameters and the in situ coefficient of permeability for SarapuíII clay,which plot outside the range of existing databases.

关键词： Permeability test Soft clay BAT probe Inflow and outflow tests

Thermoluminescence characterization of natural and synthetic irradiated Ce-monazites

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第4期42卷 643-650页

作者： V.Correcher C.Boronat j.Garcia-Guinea j.f.Benavente T.Rivera-Montalvo CIEMAT Av.Complutense 4028040MadridSpain MnCn-CSIC J.Gutierrez Abascal 228006MadridSpain Instituto Politécnico nacional CICATA-IPNAv.Legaria 694Mexico City11500Mexico

The thermoluminescence(TL)emission of synthetic and natural Ce-monazites was characterized here to determine the potential application in the identification of microscopic defects from a qualitative point of view trying to link each TL peak to a chemical-physical *** kinetic parameters that lead the luminescence processes were calculated by means of variable heating rate and computing glow curve deconvolution methods and allow identifying three groups of components at~90,130 and 290℃(for the mineral sample)and~90,170,220,270 and 320℃(for the synthetic CePO_(4):nd_(0.20),La_(0.25)).The main differences appreciated in these complex TL curves are mainly due to(i)the content of impurities(natural sample contains lanthanides as well as U 0.60%and Th 5.22%)and(ii)the degree of crystallinity of the samples which is directly related to the type of impurities(synthetic monazite relies only on nd and La).The behavior of the dose response in the range of 1-8 Gy is similar for both samples;the TL intensity increases linearly as the dose increases without changes in the position of the maxima,denoting first-order kinetic luminescence *** peak could be mostly associated with structural defects(i.e.,phase transitions),chemical reactions(i.e.,Ce3+?Ce4+redox reaction,dehydration or dehydroxylation processes)or intrinsic defects(i.e.,frenkel defects,ODCs or nBOHCs).

关键词： Thermoluminescence Kineticparameters Phosphate Ce-monazite Defects Rare earths

Resistive field generation in intense proton beam interaction with solid targets

在线全文

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第1期9卷 35-43页

作者： W.Q.Wang j.j.Honrubia Y.Yin X.H.Yang f.Q.Shao Department of Physics National University of Defense TechnologyHunanChina ETSI Aeronáutica y del Espacio Universidad Politécnica de MadridMadridSpain Department of nuclear Science and Technology National University of Defense TechnologyHunanChina

The Brown-Preston-Singleton(BPS)stopping power model is added to our previously developed hybrid code to model ion beam-plasma *** simulations show that both resistive field and ion scattering effects are important for proton beam transport in a solid target,in which they compete with each *** the target is not completely ionized,the self-generated resistive field effect dominates over the ion scattering ***,when the target is completely ionized,this situation is ***,it is found that Ohmic heating is important for higher current densities and materials with high *** energy fraction deposited as Ohmic heating can be as high as 20%-30%.Typical ion divergences with half-angles of about 5°-10°will modify the proton energy deposition substantially and should be taken into account.

关键词： interaction beam intense

Stochastic seismic inversion and Bayesian facies classification applied to porosity modeling and igneous rock identification

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 918-935页

作者： fábio j.nior Damasceno fernandes Leonardo Teixeira Antonio fernando Menezes freire Wagner Moreira Lupinacci Exploratory Interpretation and Reservoir Characterization Group(GIECAR) Department of Geology and GeophysicsFederal Fluminense UniversityNiter oiRJ24210-346Brazil Petrobras Rio de JaneiroRJ20231-030Brazil national Institute of Science and Technology of Petroleum Geophysics(InCT-GP/CnPQ) Niter oiRJ24210-346Brazil

We apply stochastic seismic inversion and Bayesian facies classification for porosity modeling and igneous rock identification in the presalt interval of the Santos Basin. This integration of seismic and well-derived information enhances reservoir characterization. Stochastic inversion and Bayesian classification are powerful tools because they permit addressing the uncertainties in the model. We used the ES-MDA algorithm to achieve the realizations equivalent to the percentiles P10, P50, and P90 of acoustic impedance, a novel method for acoustic inversion in presalt. The facies were divided into five: reservoir 1,reservoir 2, tight carbonates, clayey rocks, and igneous rocks. To deal with the overlaps in acoustic impedance values of facies, we included geological information using a priori probability, indicating that structural highs are reservoir-dominated. To illustrate our approach, we conducted porosity modeling using facies-related rock-physics models for rock-physics inversion in an area with a well drilled in a coquina bank and evaluated the thickness and extension of an igneous intrusion near the carbonate-salt interface. The modeled porosity and the classified seismic facies are in good agreement with the ones observed in the wells. notably, the coquinas bank presents an improvement in the porosity towards the top. The a priori probability model was crucial for limiting the clayey rocks to the structural lows. In Well B, the hit rate of the igneous rock in the three scenarios is higher than 60%, showing an excellent thickness-prediction capability.

关键词： Stochastic inversion Bayesian classification Porosity modeling Carbonate reservoirs Igneous rocks