检索结果-南通市图书馆

Comparison of the timing of spring phenological events between phenological garden trees and wild populations

journal of Plant Ecology 2024年第2期17卷 49-61页

作者： Calum j.Sweeney Fidelma butler Astrid Wingler School of Biological Earth&Environmental Sciences and Environmental Research InstituteUniversity College CorkDistillery FieldsNorth MallCork T23 TK30Ireland

Phenological research is engaged in monitoring the infuence of climate change on the natural *** International Phenological Gardens(IPG)network provides a valuable dataset of standardized tree phenology records dating back to the mid-20th *** make best use of this actively growing record,it is important to investigate how network data can be applied to predict the timing of phenological events in natural *** study compared clonally propagated IPG downy birch(Betula pubescens Ehrh.)and hazel(Corylus avellana L.)specimens of central European provenance to nearby wild populations at the western-most margin of the IPG network,in the south-west of *** addition to monitoring by trained scientists,observations by citizen scientists were *** order of the timing of phenological events among sites was consistent across 2 years,confrming reproducibility of the *** trees had the earliest *** leaf unfolding and *** fowering dates of the sites *** addition,leaf unfolding occurred later in the wild populations than expected from the temperature responses of the *** and *** IPG *** variation in phenology also exceeded the historical change observed at the IPG site,suggesting a potential genetic basis for climate *** circumference,refecting the age-dependent increase in tree size,was found to infuence *** phenology,with earlier timing of phenological events in larger *** fnding highlights tree size as an important consideration in the management of phenological gardens and tree phenology research in general.

关键词： citizen science downy birch(Betula pubescens) hazel(Corylus avellana) phenological garden spring phenology tree size

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

引用

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.j.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

引用

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Outcomes following minimally invasive dorsal cheilectomy for hallux rigidus:A systematic review

引用

World journal of Orthopedics 2024年第6期15卷 585-592页

作者： Katherine Esser james j butler mackenzie Roof Nathaniel P mercer michael C Harrington Alan P Samsonov Andrew j Rosenbaum john G Kennedy Department of Orthopaedic Surgery University of Toledo medical Center University of Toledo College of Medicine and Life SciencesToledoOH 43614United States Department of Orthopedic Surgery NYU Langone HealthNew YorkNY 10002United States Department of Orthopedic Surgery Albany Medical CenterAlbanyNY 12208United States

BACKGROUND Cheilectomy of the 1^(st)metatarsophalangeal joint(mTPj)is one of the most common procedures for the management of hallux ***,there is no consensus regarding outcomes following minimally invasive dorsal cheilectomy(mIDC)for the management of hallux *** To evaluate outcomes following mIDC for the management of hallux *** During November 2023,the Pubmed,EmBASE and Cochrane Library databases were systematically reviewed to identify clinical studies examining outcomes following mIDC for the management of hallux *** Six studies were *** total,348 patients(370 feet)underwent mIDC for hallux rigidus at a weighted mean follow-up of 37.9±16.5 *** distribution of patients by Coughlin and Shurna's classification was recorded in 4 studies as follows:Ⅰ(58 patients,27.1%),Ⅱ(112 patients,52.3%),Ⅲ(44 patients,20.6%).Three studies performed an additional 1^(st)mTPj arthroscopy and debridement following *** intra-articular bone debris was observed in 100%of patients in 1 *** weighted mean American orthopedic foot and ankle society score improved from a preoperative score of 68.9±3.2 to a postoperative score of *** complication rate was 8.4%,the most common of which was persistent joint pain and ***-two failures(8.7%)were ***-three secondary procedures(8.9%)were performed at a weighted mean time of 8.6±3.2 months following the index *** This systematic review demonstrated improvements in subjective clinical outcomes together with a moderate complication rate following mIDC for the management of hallux rigidus at short-term follow-up.A moderate reoperation rate at short-term follow-up was *** marked heterogeneity between included studies and paucity of high quality comparative studies limits the generation of any robust conclusions.

关键词： minimally invasive dorsal cheilectomy Hallux rigidus The first metatarsophalangeal joint Cheilectomy minimally invasive surgery

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

引用

Applied mathematics and mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： m.NEmATI m.SEFID A.KARImIPOUR A.j.CHAmKHA Faculty of mechanical Engineering Yazd UniversityYazd ***Iran Department of mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(mF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBm)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed mF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and mF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

引用

aBIOTECH 2024年第2期5卷 239-246页

作者： j.m.Lukasiewicz C.C.m.van de Wiel L.A.P.Lotz m.j.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques Consumer transparency Plant products

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

硒来源及硒浓度对肉仔鸡生长性能及硒存留的影响

引用

饲料与畜牧（新饲料） 2007年第7期 49-49页

作者：高俊 I.Yoon T.m.Werner j.m.butler

用360只一日龄的jumboCornish杂交肉仔鸡进行为期6周的试验，以评估不同的硒来源及硒添加量对肉鸡生长性能和硒存留率的影响。肉仔鸡饲以玉米一豆粕型日粮，其中添加0（负对照）、来源于SelenosourceAF（硒酵母A，DiamondVm-山s，CedarR... 详细信息

用360只一日龄的jumboCornish杂交肉仔鸡进行为期6周的试验，以评估不同的硒来源及硒添加量对肉鸡生长性能和硒存留率的影响。肉仔鸡饲以玉米一豆粕型日粮，其中添加0（负对照）、来源于SelenosourceAF（硒酵母A，DiamondVm-山s，CedarRapids，IA）的0．1、0．2、0．3ppm硒、来源于Sel—Plex（酵母硒B，Alltech，Nicholasville，KY）的0．3ppm硒、来源于亚硒酸钠的0．3ppm硒。

关键词：生长性能硒浓度肉仔鸡硒存留率亚硒酸钠一日龄添加量硒酵母

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

引用

journal of Rare Earths 2024年第10期42卷 1950-1959页

作者： P.A.martínez-montoya j.m del Río A.de j.morales-Ramirez m.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.LindavistaGustao A.MaderoCDMXC.P.07738Mexico Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.LindavistaGustavoA.MaderoCDMXC.P.07738Mexico Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P.02250CDMXMexico

Polymeric nanoparticles of poly(methyl methacrylate)were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-IR)and ultraviolet-visible(UV-Vis)*** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEm).The polymeric materials were used for recovery of[Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85%of[Eu]at pH of *** images of SEm after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50%of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of 6.

关键词： [Eu]recovery Chelating effect Extraction process Stripping process Emulsion polymerization Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analysis of synthetic parameters for coating aluminum powders with phenyltriethoxysilane coupling agent and their effects on powder flow behavior

引用

Particuology 2024年第7期90卷 412-417页

作者： Lillian m.mawby Bellamarie Ludwig Benjamin j.Lear Department of Chemistry The Pennsylvania State UniversityUniversity ParkPA16802USA Applied Research Laboratory The Pennsylvania State UniversityUniversity ParkPA16802USA

Though silanization of aluminum powder is currently used to improve its flow properties,for use as an alternative fuel source,there are a wide range of experimental parameters for the process and not all of them have been thoroughly *** this is complete,it is unknown if the process is optimized in terms of time,efficiency,and ***,we report on a study into the effects of changes in humidity,degree of agitation,reaction temperature,and curing time upon the deposition of phenyl triethoxysilane into 20μm(d50)aluminum *** confirm the deposition of the coating via diffuse reflectance infrared spectroscopy and x-ray photoelectron *** then characterize the coated particles using apparent density measurements and Carney flow *** analysis of variance,we find that,of the parameters explored,only changes in cure time and reaction temperature provide meaningful changes to the apparent density,while none of our parameters produced statistically significant changes in Carney flow ***,we conclude that,when optimizing silanization of aluminum particles,environmental control of humidity is unneeded and that the reaction can be run with minimal *** ability to largely ignore these parameters is a benefit to large-scale processing.

关键词： Aluminum powder Silane Fluidization Apparent density Carney flow

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Background removal from global auroral images:Data-driven dayglow modeling

引用

Earth and Planetary Physics 2024年第1期8卷 247-257页

作者： A.Ohma m.madelaire K.m.Laundal j.P.Reistad S.m.Hatch S.Gasparini S.j.Walker Birkeland Centre for Space Science Department of Physics and TechnologyUniversity of BergenBergenNorway

Global images of auroras obtained by cameras on spacecraft are a key tool for studying the near-Earth ***,the cameras are sensitive not only to auroral emissions produced by precipitating particles,but also to dayglow emissions produced by photoelectrons induced by *** emissions and scattered sunlight can contribute to the background *** fully utilize such images in space science,background contamination must be removed to isolate the auroral *** we outline a data-driven approach to modeling the background intensity in multiple images by formulating linear inverse problems based on B-splines and spherical *** approach is robust,flexible,and iteratively deselects outliers,such as auroral *** final model is smooth across the terminator and accounts for slow temporal variations and large-scale asymmetries in the *** demonstrate the model by using the three far ultraviolet cameras on the Imager for magnetopause-to-Aurora Global Exploration(ImAGE)*** method can be applied to historical missions and is relevant for upcoming missions,such as the Solar wind magnetosphere Ionosphere Link Explorer(SmILE)mission.

关键词： aurora dayglow modeling global auroral images far ultraviolet images dayglow removal

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：