检索结果-南通市图书馆

黏声波方程波场模拟的通用格式自适应系数频域有限差分方法

1982年

作者：（英）j.m.苏泽兰等熊希民苏国英译

来源：汇雅图书（南通市图书馆... 评论

在线全文

汇雅图书（南通市图书馆）

学校读者我要写书评

暂无评论

地球物理学报 2024年第2期67卷 654-669页

作者：徐文豪巴晶 j.m.Carcione 朱鹤松河海大学地球科学与工程学院南京211100 National Institute of Oceanography and Applied Geophysics-OGS Borgo Grotta Gigante 42/cTriesteSgonico 34010Italy

黏声波方程常被用于描述地下介质的黏弹性及波的传播现象,频域有限差分(finite difference frequency domain,FDFD)方法是黏声波和黏弹性波波场模拟的常用工具.目前FDFD黏声波模拟常用的二阶五点方法和优化九点方法在一个波长内的网格... 详细信息

黏声波方程常被用于描述地下介质的黏弹性及波的传播现象,频域有限差分(finite difference frequency domain,FDFD)方法是黏声波和黏弹性波波场模拟的常用工具.目前FDFD黏声波模拟常用的二阶五点方法和优化九点方法在一个波长内的网格点数小于4时误差较大.通过令FDFD系数随一个波长内的网格点数自适应从而提高FDFD方法的精度,本文针对黏声波波场模拟发展了一种适用于不同空间采样间隔之比的通用格式自适应系数FDFD方法.同时,为了验证自适应系数FDFD方法对一般黏声波模型的有效性,本文针对三个典型的黏声波模型,分别采用解析解和基于高阶FDFD的参考解验证了所提出方法的有效性.本方法的FDFD格式通过在传统的二阶FDFD格式的基础上引入相关校正项得到,其中校正项按网格点与中心点的距离进行分类选取,同时校正项对应的自适应FDFD系数不仅和空间采样间隔之比相关,还和一个波长内的采样点数相关.所需的自适应FDFD系数可通过声波方程的数值频散关系和查找表高效给出.数值频散分析表明,在空间采样间隔相等或不等的情况下,以相速度误差不超过1%为标准,通用格式自适应系数FDFD方法所需的一个波长内的采样点数均小于2.5.数值模拟实验表明,对于不同的空间采样间隔之比,相对于常用的二阶五点FDFD方法和优化九点FDFD方法,通用格式自适应系数FDFD方法均可在相似的计算量和内存需求下,有效提高黏声波模拟的精度.

关键词：黏声波频域有限差分自适应系数波场模拟通用格式

粉末冶金Al-5.6Zn-2mg合金在热压缩过程中加工硬化特性及本构模型的比较

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

journal of Central South University 2024年第2期31卷 346-368页

作者： KATIKA Harikrishna DAmODA R.K. DAVIDSON m.j. SEETHARAm R. KASAGANI Veera Venkata Nagaraju Department of mechanical Engineering National Institute of TechnologyWarangal 506004India Department of mechanical Engineering The Indian Institute of Information Technology Design and ManufacturingKurnool 518007India

在300~5000℃、应变速率为0.1~0.0001 s−1的条件下,在万能试验机上对Al-5.6Zn-2mg铝合金进行热压缩试验,以确定动态再结晶开始时的加工硬化速率曲线σ_(c)(ε_(c))l以及关键特征σ_(c)(ε_(c))l、σ_(p)(ε_(p))和σ_(ss)与Z系数之间的... 详细信息

在300~5000℃、应变速率为0.1~0.0001 s−1的条件下,在万能试验机上对Al-5.6Zn-2mg铝合金进行热压缩试验,以确定动态再结晶开始时的加工硬化速率曲线σ_(c)(ε_(c))l以及关键特征σ_(c)(ε_(c))l、σ_(p)(ε_(p))和σ_(ss)与Z系数之间的相关性。使用了四个本构模型,Arrhenius模型、改进的johnson-Cook模型(mjC)、改进的Zerilli-Armstrong模型(mZA)和开发的人工神经网络(ANN)。结果表明,ANN型模型和Arrhenius模型的相对误差的绝对平均值最低,分别为0.486%和3.36%,mZA型模型和mjC型模型的相对误差的绝对平均值较高,分别为8.84%和3.93%。由于Arrhenius模型能够处理各种因素之间的非线性关系,因此它被认为是最合适的预测模型,但在材料性质未知或实验数据有限的情况下,mjC模型可能是一种更简单的替代方法。mZA模型不适合估计热压缩时的流变应力。此外,训练最好的神经网络模型的预测性能最好,相对误差的绝对平均值为0.486%,R值为0.99。

关键词：加工硬化速率曲线本构建模热压缩 EBSD分析流变曲线

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.j.m.HmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

辣椒素治疗神经病理性疼痛:4周后轴突反射血管舒张与疼痛减轻相关

在线全文

学校读者我要写书评

暂无评论

中国疼痛医学杂志 2024年第4期30卷 251-254页

作者： Sendel m Dunst A Forsten pointer j 贺婷(译) 郑拥军(校) 不详复旦大学附属华东医院

辣椒素是瞬时受体电位香草酸亚型1(transient receptor potential vanilloid 1,TRPV1)的激动剂,用于外周神经病理性疼痛的局部治疗。其作用机制是皮肤痛觉感受器可逆的去功能化和变性及随后的再生。该研究假设伤害性传入的一个亚类,肽... 详细信息

辣椒素是瞬时受体电位香草酸亚型1(transient receptor potential vanilloid 1,TRPV1)的激动剂,用于外周神经病理性疼痛的局部治疗。其作用机制是皮肤痛觉感受器可逆的去功能化和变性及随后的再生。该研究假设伤害性传入的一个亚类,肽能血管活性伤害感受器的功能加速恢复是辣椒素镇痛的潜在原因。在非干预性探索性试验中,23名患有外周神经病理性疼痛的病人接受了1次局部高浓度辣椒素治疗。评估基线疼痛等级、共病和生活质量。在受影响的皮肤中进行功能性激光散斑对比分析(热诱发神经源性血管舒张以评估肽能伤害感受器的功能特性)和定量感觉测试。治疗4周后,再次进行功能性激光散斑对比分析和问卷调查。在第2、10和12周进行电话随访。局部辣椒素治疗诱导疼痛强度显著降低,最大值出现在第4周。同时,热诱发的神经源性血管舒张平均值与治疗前相似。一半的病人不仅显示出功能恢复,而且显示出血管舒张的改善,表明神经纤维的再生。在第4周,热诱发的神经源性血管扩张改善病人比恶化的病人疼痛减轻更多。血管舒张程度与疼痛减轻显著相关。表明肽能感受器的再生可能是辣椒素诱导镇痛的机制,辣椒素对这些纤维的疾病缓解作用在应用4周后已经发生。

关键词：伤害感受器痛觉感受器疼痛减轻血管舒张辣椒素神经病理性疼痛激光散斑血管扩张

巴拉尼《急性单侧前庭病/前庭神经炎诊断标准》编译

在线全文

学校读者我要写书评

暂无评论

听力学及言语疾病杂志 2024年

作者：金占国王恩彤 Strupp m Bisdorff A Furman j 空军特色医学中心航空航天眩晕诊疗研究中心首都医科大学电力教学医院(国家电网公司北京电力医院)耳鼻咽喉头颈外科

急性单侧前庭病(acute unilateral vestibulopathy,AUVP)也称前庭神经炎(vestibular neuritis,VN),为一种急性前庭综合征(acute vestibular syndrome,AVS)。该病虽为较常见的外周性眩晕疾病,但一直以来缺少统一的诊断标准,临床上易被误诊误治。2022年10月巴拉尼协会发布了AUVP/VN的诊断标准(以下简称《标准》),现就该标准进行编译,以加深相关专业医师对该病的认识。

关键词：

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： m.NEmATI m.SEFID A.KARImIPOUR A.j.CHAmKHA Faculty of mechanical Engineering Yazd UniversityYazd ***Iran Department of mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(mF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBm)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed mF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and mF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

在线全文

学校读者我要写书评

暂无评论

aBIOTECH 2024年第2期5卷 239-246页

作者： j.m.Lukasiewicz C.C.m.van de Wiel L.A.P.Lotz m.j.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques Consumer transparency Plant products

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

癫痫

癫痫