检索结果-南通市图书馆

Thermoluminescence characterization of natural and synthetic irradiated ce-monazites

在线全文

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第4期42卷 643-650页

作者： V.correcher c.Boronat j.Garcia-Guinea j.F.Benavente T.Rivera-Montalvo cIEMAT Av.Complutense 4028040MadridSpain MNcN-cSIc J.Gutierrez Abascal 228006MadridSpain Instituto Politécnico Nacional CICATA-IPNAv.Legaria 694Mexico City11500Mexico

The thermoluminescence(TL)emission of synthetic and natural ce-monazites was characterized here to determine the potential application in the identification of microscopic defects from a qualitative point of view trying to link each TL peak to a chemical-physical *** kinetic parameters that lead the luminescence processes were calculated by means of variable heating rate and computing glow curve deconvolution methods and allow identifying three groups of components at~90,130 and 290℃(for the mineral sample)and~90,170,220,270 and 320℃(for the synthetic cePO_(4):Nd_(0.20),La_(0.25)).The main differences appreciated in these complex TL curves are mainly due to(i)the content of impurities(natural sample contains lanthanides as well as U 0.60%and Th 5.22%)and(ii)the degree of crystallinity of the samples which is directly related to the type of impurities(synthetic monazite relies only on Nd and La).The behavior of the dose response in the range of 1-8 Gy is similar for both samples;the TL intensity increases linearly as the dose increases without changes in the position of the maxima,denoting first-order kinetic luminescence *** peak could be mostly associated with structural defects(i.e.,phase transitions),chemical reactions(i.e.,ce3+?ce4+redox reaction,dehydration or dehydroxylation processes)or intrinsic defects(i.e.,Frenkel defects,ODcs or NBOHcs).

关键词： Thermoluminescence Kineticparameters Phosphate ce-monazite Defects Rare earths

consumer transparency in the production chain for plant varieties produced using new genomic techniques

在线全文

学校读者我要写书评

暂无评论

aBIOTEcH 2024年第2期5卷 239-246页

作者： j.M.Lukasiewicz c.c.M.van de Wiel L.A.P.Lotz M.j.M.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically Modified Organisms Directive(2001/18/Ec)in the European *** the proposal of the European commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques consumer transparency Plant products

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第1期45卷 197-216页

作者： c.G.PAVITHRA B.j.GIREESHA M.L.KEERTHI Department of PG Studies and Research in Mathematics Kuvempu UniversityShankaraghatta 577451India Department of Mathematics and Statistics M.S.Ramaiah University of Applied SciencesBengaluru 560058India

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTM) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

关键词： convection radiation moving longitudinal fin Adomian decomposition Sumudu transform method(ADSTM) trihybrid nanofluid magnetic field

cO oxidation under lean and stoichiometric conditions over ceriazirconia with very low metal contents(cu,co,Ag and Pt)

在线全文

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第9期42卷 1669-1681,I0002页

作者： j.c.Martínez-Munuera M.P.Yeste A.García-García McMA Group Department of Inorganic Chemistry and Institute of MaterialsUniversity of AlicanteCarretera de San Vicente del Raspeig s/n03690San Vicente del RaspeigAlicanteSpain Solid chemistry and catalysis Group Department of Materials ScienceMetallurgic Engineering and Inorganic ChemistryInstitute of Electronic Microscopy and Materials ResearchUniversity of CádizAp.40E-11510Puerto RealCádizSpain

In this work,several ceria-zirconia based catalysts with very lo w(and equimolar) metal contents were prepared,characterised and tested for the cO oxidatio n reaction(under lean and stoichiometric conditions),trying to emulate those conditions found in a diesel oxidation catalyst(DOc) system from a diesel engine and those encountered under gasoline exhaust(λ=1).The metals chosen are cu,co,Ag and Pt(as a reliable benchmark).The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts,showing differences among dispersion(Ag-catalyst seems to present a low level of dispersion).This catalyst seems to be characterised,as well,by a strong electronic interaction between ce and Ag centres which is suggested to yield an improved reducibility under H_(2)-TPR ***,the order in catalytic activity(cu>Ag>co≈Pt>>support) seems not to follow the order found in reducibility and the cu-catalyst seems to be the most active independently on the reaction conditions,yielding nearly overlapped cO oxidation catalytic *** restingly,a stro ng correlation between the catalytic activity under the two conditions tested and the OSc values of the ce_(0.8)Zr_(0.2)O_(2)-supported metal catalysts is ***,OSc parameter measured at 150℃ can be used as a relevant descriptor to evaluate the cO oxidation activity at low and medium conversions for the investigated catalysts,much better than the H_(2)-TPR measurements.

关键词： cO oxidation Low metal content ceria-zirconia copper species OSc parameter Rare earths

Laser-induced graphene-coated wearable smart textile electrodes for biopotentials signal monitoring

在线全文

学校读者我要写书评

暂无评论

Frontiers of Materials Science 2024年第1期18卷 95-111页

作者： c.M.Vidhya Yogita Maithani Sakshi Kapoor j.P.Singh Department of Physics Indian Institute of Technology DelhiHauz KhasNew Delhi 110016India

This paper describes how to produce a wearable dry electrode at a reasonable cost and how to use it for the monitoring of biopotentials in *** textiles in wearable technologies have made a great advancement in the health care management and living standards of *** was manufactured using the low-cost single-step process,laser ablation of polyimide,a commercial *** dispersions were made using solvent isopropyl alcohol which has low boiling point,nontoxicity,and environmental *** successive coating of the graphene dispersion on the cotton fabric to make it conductive,the sheet resistance of the resulting fabric dropped to 3% of its initial *** laser-induced graphene(LIG)cotton dry electrodes thus manufactured are comparable to Ag/Agcl wet electrodes in terms of the skin-to-electrode impedance,measuring between 78.0 and 7.2 kΩ for the frequency between 40 Hz and 1 *** LIG cotton electrode displayed a signal-to-noise ratio of 20.17 *** to its comfort,simplicity,and good performance over a longer period of time,the textile electrode appears suited for medical applications.

关键词： biopotential electrocardiogram electromyogram flexible electrode textile porous graphene

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang c.j.Wang W.V.Yue Z.j.Zhang Z.Q.Yue Department of civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UcS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UcS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process constant drilling speed Soil improvement Quality assessment

n-Alkane bound biomarker fingerprints from asphaltenes in the bitumens of Eastern Dahomey Basin,Nigeria:Source and genetic implications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Research 2024年第1期9卷 85-91页

作者： Modupe A.Egbeola Olubunmi c.Adeigbe Olajide j.Adamolekun Department of Geology University of IbadanIbadanNigeria Structural Geology and Tectonics Institute of Applied GeosciencesKIT-Karlsruhe Institute of TechnologyAdenauerring 20a76131KarlsruheGermany

The asphaltene fractions of the bitumens of Eastern Dahomey Basin in Nigeria,were analyzed by flash pyrolysis-gas chromatography(Py-Gc)method in order to unravel its geochemical history and *** distributions of the initial biomarkers of the original oils from the pyrolysates are related to the assessment of organic matter source,paleo-redox conditions and source environment during ***,it effectively establishes the genetic relationship of the *** n-alkane distributions in the pyrolysates reveal nc_(9)-nc_(32)n-alkanes,maximizing at nc_(14),isoprenoids-pristane(Pr)and phytane(Ph),and some n-alkene *** peaks of low to medium-weight nc_(9)-nc20 n-alkanes and low peaks of nc_(21)+n-alkanes characterize the *** reveal that abundant algal organic matter with some terrigenous inputs contributed to the source rock of the *** high concentration of marine organic matter inputs to the source rock is further confirmed by the nc_(17)/nc27 ratios which range from 5.39 to 19.82 and shows the predominance of nc_(17)*** general unimodal n-alkane distributions in the bitumens indicate derivation from similar organic matter types showing that they are genetically *** anoxic to suboxic environmental conditions that prevailed during the deposition of the sediments is revealed by the isoprenoids,Pr/Ph ratios(0.72-1.28).Pristane/nc_(17)and Phytane/nc_(18)range from 0.16 to 0.33 and 0.22 to 0.56,revealing that the bitumens were from predominantly marine organic matter(type II kerogen)preserved in a reducing environment with no evidence of ***,the Ph/nc_(18)ratio and the cross plot of Pr+Ph/nc_(17)+nc_(18)allow the classification of the bitumens into two subfamilies/groups(A and B).The bitumen samples have low wax content as indicated by the degree of waxiness ranging from 0.21 to 0.38 which confirms low terrigenous *** on the carbon preference index(cPI:0.92 to 1.55)and odd-even predo

关键词： Genetic relationship Flash pyrolysis Biomarker Asphaltene Pyrolysates

Storing Freshwater Versus Storing Electricity in Power Systems with High Freshwater Electric Demand

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Modern Power Systems and clean Energy 2024年第2期12卷 323-333页

作者： Mubarak j.Al-Mubarak Antonio j.conejo Department of Electrical and computer Engineering The Ohio State UniversityColumbusOHUSA Department of Electrical Engineering Kuwait UniversityP.O.Box 5969Safat 13060Kuwait Department of Integrated Systems Engineering and the Department of Electrical and computer Engineering The Ohio State UniversityColumbusOH 43210USA IEEE

We consider a power system whose electric demand pertaining to freshwater production is high(high freshwater electric demand),as in the Middle East,and investigate the tradeoff of storing freshwater in tanks versus storing electricity in batteries at the day-ahead operation *** storing freshwater and storing electricity increase the actual electric demand at valley hours and decrease it at peak hours,which is generally beneficial in term of cost and ***,to what extent?We analyze this question considering three power systems with different generation-mix configurations,i.e.,a thermal-dominated mix,a renewable-dominated one,and a fully renewable *** generation-mix configurations are inspired by how power systems may evolve in different countries in the Middle *** production uncertainty is compactly modeled using chance *** draw conclusions on how both storage facilities(freshwater and electricity)complement each other to render an optimal operation of the power system.

关键词： Power system operation freshwater production and transportation coordination day-ahead scheduling

Mathematical modeling and simulations of stress mitigation by coating polycrystalline particles in lithium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 947-962页

作者： N.IQBAL j.cHOI S.F.SHAH c.LEE S.LEE Department of Mechanical Roboticsand Energy EngineeringDongguk University-SeoulSeoul 04620Republic of Korea

A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyco_(z)O_(2)(x≥0.8)(NMc)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary NMc particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more ***,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress *** paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of NMc active particles mitigates stress levels.

关键词： lithium-ion battery(LIB) polycrystalline particle coating finite element simulation Ni-rich LiNixMnyco_(z)O_(2)(x>0.8)(NMc)