检索结果-南通市图书馆

Mechanical performance of 22SiMn2TiB steel welded with lowtransformation- temperature filler wire and stainless steel filler wire

引用

Journal of Iron and Steel Research International 2024年第4期31卷 967-981页

作者： Zi-dong Lin Kai-jie song Zhen Sun Zi-qian Zhu Xue-feng Zhao Constantinos Goulas Wei Ya Xing-hua Yu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401120China Department of Design Production and Management Faculty of Engineering Technology.University of TwenteEnschede 7500 AETheNetherlands Rotterdam Additive Manufacture Fieldlab(RAMLAB) Rotterdam 3089 JWTheNetherlands

TX-80 low-transformation-temperature(LTT)welding wire was used to replace the traditional ER 307Si welding wire to realize the connection of 22SiMn2TiB armor steel in manual overlay *** previously existing issues,such as welding cracks,large welding deformation,and severe welding residual stress,were solved to ensure good strength and ductility *** particular,with the same welding conditions,TX-80 LTT wire eliminates welding *** reduces the welding deformation no matter the base pretreatment of pre-setting angle or no pre-setting *** comparison,it was found that the microstructure at the TX-80 weld is mainly composed of martensite and a small amount of retained *** contrast,the microstructure of the ER 307Si weld consists of a large amount of austenite and a small amount of skeleton-like *** variation trend of residual stress and microhardness from the weld to the base were investigated and compared with the mechanical properties of base *** TX-80 and the ER 307Si tensile samples elongation is 6.76%and 6.01%,while the ultimate tensile strengths are 877 and 667 MPa,*** average impact toughness at room temperature of the ER 307Si weld is 143.9 J/cm^(2),much higher than that of the TX-80 weld,which is only 36.7 J/cm^(2).The relationship between impact and tensile properties with microstructure species and distribution was *** addition,the fracture surface of the tensile and the impact samples was observed and *** dimples,fewer pores,larger radiation zone,and shear lips of TX-80 samples indicate better tensile ductility and worse impact toughness than those of ER 307Si weld.

关键词： Low-transformation-temperature material 22SiMn2TiB steel Welding deformation Residual stress Martensitic transformation Mechanical property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and mechanical properties of Co-28Cr-6Mo-0.22C investment castings by current solution treatment

引用

China Foundry 2024年第4期21卷 369-378页

作者： Ze-yu Dan Jun Liu Jian-lei Zhang Yan-hua Li Yuan-xin Deng Yun-hu Zhang Chang-jiang song Center for Advanced Solidification Technology School of Materials Science and EngineeringShanghai UniversityShanghai 200444China Wuxi CastPro Precision Co. Ltd.Wuxi 214105JiangsuChina

This study examined the impact of current solution treatment on the microstructure and mechanical properties of the Co-28Cr-6Mo-0.22C alloy investment *** findings reveal that the current solution treatment significantly promotes the dissolution of carbides at a lower *** optimal conditions for solution treatment are determined as a solution temperature of 1,125°C and a holding time of 5.0 *** these parameters,the size and volume fraction of precipitated phases in the investment castings are measured as6.2μm and 1.1vol.%.The yield strength,ultimate tensile strength,and total elongation of the Co-28Cr-6Mo-0.22C investment castings are 535 MPa,760 MPa,and 12.6%,*** values exceed those obtained with the conventional solution treatment at 1,200°C for 4.0 *** findings suggest a phase transformation of M_(23)C_(6)→σ+C following the current solution treatment at 1,125°C for 5.0 *** comparison,the traditional solution treatment at 1,200°C for 4.0 h leads to the formation of M_(23)C_(6)and M_(6)C *** is noteworthy that the non-thermal effect of the current during the solution treatment modifies the free energy of both the matrix and precipitation *** modification lowers the phase transition temperature of the M_(23)C_(6)→σ+C reaction,thereby facilitating the dissolution of *** a result,the current solution treatment approach achieves carbide dissolution at a lower temperature and within a significantly shorter time when compared to the traditional solution treatment methods.

关键词： CoCrMo alloy investment castings current solution treatment microstructure mechanical property carbide

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

3D modeling for effect of tool eccentricity on coupled thermal and material flow characteristics during friction stir welding

引用

Transactions of Nonferrous Metals Society of China 2024年第10期34卷 3309-3325页

作者： Hao SU Ji CHEN chuan-song WU Key Laboratory for Liquid−Solid Structural Evolution&Processing of Materials Ministry of EducationInstitute for Materials JoiningShandong UniversityJinan 250061China

A novel three-dimensional numerical model is proposed to investigate the effect of tool eccentricity on the coupled thermal and material flow characteristics in friction stir welding(FSW) *** asymmetrical boundary condition at the tool-workpiece interface,and the dynamic mesh technique are both employed for the consideration of the tool eccentricity during tool *** is found that tool eccentricity induces the periodical variation of the heat densities both at the tool-workpiece interface and inside the shear layer,but the fluctuation amplitudes of the heat density variations are ***,it is demonstrated that tool eccentricity results in significant variation of the material flow behavior in one tool rotating ***,the material velocity variation at the retreating side is particularly important for the formation of the periodic characteristics in *** modeling result is found to be in good agreement with the experimental one.

关键词： friction stir welding tool eccentricity thermal behavior periodic material flow numerical simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Necroptosis contributes to non-alcoholic fatty liver disease pathoetiology with promising diagnostic and therapeutic functions

引用

World Journal of Gastroenterology 2024年第14期30卷 1968-1981页

作者： Hong-Ju Sun Bo Jiao Yan Wang Yue-hua Zhang Ge Chen Zi-Xuan Wang Hong Zhao Qing Xie Xiao-hua song Department of General Medicine Qingdao Central HospitalUniversity of Health and Rehabilitation Sciences(Qingdao Central Medical Group)Qingdao 266042Shandong ProvinceChina Department of Gastroenterology Qingdao Central HospitalUniversity of Health and Rehabilitation Sciences(Qingdao Central Medical Group)Qingdao 266042Shandong ProvinceChina Department of Medical Administration Qingdao Central HospitalUniversity of Health and Rehabilitation Sciences(Qingdao Central Medical Group)Qingdao 266042Shandong ProvinceChina Qingdao Medical College Qingdao UniversityQingdao 266042Shandong ProvinceChina Department of Infectious Diseases Ruijin HospitalShanghai Jiao Tong University School of MedicineShanghai 200025China

Nonalcoholic fatty liver disease(NAFLD)is the most prevalent type of chronic liver ***,the disease is underappreciated as a remarkable chronic disorder as there are rare managing *** studies have focused on determining NAFLD-caused hepatocyte death to elucidate the disease pathoe-tiology and suggest functional therapeutic and diagnostic ***,ferroptosis,and necroptosis are the main subtypes of non-apoptotic regulated cell deaths(RCDs),each of which represents particular *** the complexity of the findings,the present study aimed to review these types of RCDs and their contribution to NAFLD progression,and subsequently discuss in detail the role of necroptosis in the pathoetiology,diagnosis,and treatment of the *** study revealed that necroptosis is involved in the occurrence of NAFLD and its progression towards steatohepatitis and cancer,hence it has potential in diagnostic and therapeutic ***,further studies are necessary.

关键词： Nonalcoholic fatty liver disease Apoptosis Necroptosis Cell death Diagnosis Treatment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multiple Matching Attenuation Based on Curvelet Domain Extended Filtering

引用

Journal of Ocean University of China 2024年第4期23卷 924-932页

作者： hua Qingfeng CHEN Zhang HE Huili TAN Jun CHEN Haifeng LI Guanbao song Peng ZHAO Bo JIANG Xiuping Key Laboratory of Marine Geology and Metallogeny First Institute of OceanographyMinistry of Natural ResourcesQingdao 266061China Laboratory for Marine Mineral Resources Qingdao Marine Science and Technology CenterQingdao 266237China College of Marine Geoscience Ocean University of ChinaQingdao 266100China BGP Inc. China National Petroleum CorporationZhuozhou 072750China Key Laboratory of Submarine Geosciences and Prospecting Techniques Ministry of EducationQingdao 266100China

The paper develops a multiple matching attenuation method based on extended filtering in the curvelet domain,which combines the traditional Wiener filtering method with the matching attenuation method in curvelet ***,the method uses the predicted multiple data to generate the Hilbert transform records,time derivative records and time derivative records of Hilbert ***,the above records are transformed into the curvelet domain and multiple matching attenuation based on least squares extended filtering is ***,the attenuation results are transformed back into the time-space *** on the model data and field data show that the method proposed in the paper effectively suppress the multiples while preserving the primaries ***,it has higher accuracy in eliminating multiple reflections,which is more suitable for the multiple attenuation tasks in the areas with complex structures compared to the time-space domain extended filtering method and the conventional curvelet transform method.

关键词： multiple matching attenuation curvelet domain extended filtering

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cooperative enhancement of mechanical and tribological properties through tailoring TiN transition interface in boron nitride nanosheets reinforced copper composites

引用

Rare Metals 2024年第10期43卷 5202-5215页

作者： Zhong-hua Li Liang Liu Xin You Jian-Hong Yi Rui Bao Ming-Yi Zhu song Lu Jun-Jun Pai Faculty of Materials Science and Engineering Kunming University of Science and Technology Key Laboratory of Advanced Materials of Yunnan Province Kunming University of Science and Technology

Strengthening interface bonding between boron nitride nanosheets(BNNS) and copper matrix is an essential prerequisite for exploiting a new generation of copper matrix composites(CMCs) with high strength and wear resistance. Herein, BNNS/Cu composites were fabricated by the powder metallurgy route, matrix-alloying(adding 1.0 wt% Ti) strategy was adopted to improve the interfacial wettability and strengthen interface adhesion. A typical "sandwich"-like multiply interface structure involving TiN transition layers, BNNS and Cu matrix had been well constructed through the rational heat treatment(900℃for 120 min). Additionally, nano-sized TiB whisker was in situ formed in the vicinity of the interface, it had linked the BNNS-Cu-TiN multiply interface, which played a role of "threading the needle" and significantly strengthened the multi-interfaces bonding. This specific interface structure was finely characterized, and the formation mechanism of solid-state interfacial reaction feature was proposed. The results demonstrated that the ultimate tensile strength(UTS) of BNNS/Cu-(Ti)-900℃ increased from 248 to 530 MPa(increased by 114%), and the coefficient of friction(COF) decreased from 0.51 to 0.28 than pure Cu. This work highlights the importance of interface configuration design, which contributes to the development of CMCs with prominent comprehensive properties.

关键词： Boron nitride nanosheets Copper matrix composites Interface structure Mechanical and frictional properties

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Medicine Combined with Adjuvant Chemotherapy for Improving Myelosuppression in Colorectal Cancer Patients:A Systematic Review and Network Meta-Analysis

引用

Chinese Journal of Integrative Medicine 2024年第7期30卷 643-652页

作者： LI Rui ZHANG Tong YAN Shao-hua YAN Yun-zi DING Ya-cong WANG Yan-song YANG Yu-fei Department of Oncology China Academy of Chinese Medical SciencesXiyuan HospitalBeijing100091China Department of Oncology Dongfang Hospital Beijing University of Chinese MedicineBeijing100078China Graduate School Beijing University of Chinese MedicineBeijing100029China

Objective To assess the effectiveness of Chinese herbal medicine(CHM)combined with adjuvant chemotherapy on myelosuppression for colorectal cancer(CRC)patients using network meta-analysis(NMA).Methods Literature searches in both international(PubMed,Embase,Web of Science,and Cochrane Library)and Chinese(China Science and Technology Journal Database,Wanfang Data,China National Knowledge Infrastructure)databases for relevant randomized controlled trials(RCTs)were conducted from inception until October 10,*** included RCTs of patients who received CHM combined with chemotherapy,including FOLFOX,XELOX,FOLFIRI,and other relevant regimens in the CHM treatment *** outcomes included the incidence of myelosuppression,leukopenia,hemoglobin reduction,and *** reviewers independently screened the databases,extracted the data,and assessed the risk of bias and credibility of *** 5.4.1 software and STATA 14.0 were used to perform the *** A total of 31 RCTs were included,published from 2008 to 2021 in *** these,2,314 participants comparing the following 9 CHMs were identified:Shengbai Recipe(SBR),Bazhen Decoction(BZD),Jianpi Jiedu Recipe(JJR),Jianpi Recipe(JR),Compound Cantharis Capsule(CCC),Zaofan Pill(ZFP),Guilu Erxian Gel(GL),Buzhong Tiaogan Decoction(BZ),and Qiamagu Capsule(QM).The results of NMA found an indirect *** on the surface under the cumulative ranking curve(SUCRA),the ZFP+chemotherapy group had the lowest incidence of myelosuppression,with an odds ratio(OR)of 0.08[95%confidence interval(CI):0.01,0.76],whereas the GL+chemotherapy group had the lowest incidence of leukopenia,hemoglobin reduction,and thrombocytopenia,with an OR of 5.25(95%CI:2.41,11.43),4.66(95%CI:2.23,9.72),and 0.27(95%CI:0.13,0.54),***,BZD+chemotherapy could alleviate leukopenia,hemoglobin reduction,and thrombocytopenia(P<0.01).Pairwise comparison showed that there was no difference in the efficacy among the 8 CHMs+c

关键词： Chinese herbal medicine colorectal cancer network meta-analysis systematic review myelosuppression chemotherapy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High-Performanceα-Diimine Nickel Complexes for Facile Access of PE Elastomers with Exceptional Material Properties

引用

Chinese Journal of Polymer Science 2024年第5期42卷 620-635,I0008页

作者： Li-Dong Qin Xin-Yu Wang Qaiser Mahmood Zhi-Xin Yu Yi-Zhou Wang song Zou Tong-Ling Liang Wen-hua Sun School of Pharmaceutical Sciences Changchun University of Chinese MedicineChangchun130117China Chemistry and Chemical Engineering Guangdong Laboratory Shantou515031China Key Laboratory of Engineering Plastics and Beijing National Laboratory for Molecular Science Institute of ChemistryChinese Academy of SciencesBeijing100190China

For practicable elastomeric polyethylene,achieving high catalyst thermal stability and activity,along with precise control of polymer properties such as branching density,molecular weights,and distribution,is crucial but *** this study,two sets of symmetricalα-diimine nickel complexes,each comprising four nickel bromide or chloride complexes,were synthesized and investigated their performance for ethylene polymerization under various reaction *** activation with either Et2AlCl or MMAO cocatalysts,these complexes displayed not only high activity but also generated high molecular weight polyethylenes with controlled polydispersity and a substantial number of *** catalyst with the least steric hindrance displayed the remarkable high activity(up to 1.2×10^(7) g·mol^(-1)·h^(-1)).Notably,nickel bromides demonstrated higher activity compared to their chloride *** investigation into the effect of reaction temperature on catalytic performance revealed that NiBrMe-MMAO system displayed high thermal stability(activity up to 2.51×10^(6) g·mol^(-1)·h^(-1) at 100℃)and consistently yielded high polymer molecular weights with narrow polydispersity over a broad temperature range of 30-100℃.Of significant note,mechanical analysis of the resulting polyethylene demonstrated excellent ultimate tensile strength and high strain at ***,the polyethylene sample prepared at 100℃exhibited ultimate tensile strength up to 10 MPa with 1863%maximum strain at break and a strain recovery of up to 54.9%after ten cycles at a fixed strain of 300%,indicating excellent material properties of prepared thermoplastic polyethylene elastomers(TPE).

关键词： Thermoplastic polyethylene elastomers α-Diimine nickel pre-catalysts Ethylene polymerization Mechanical properties Highly branched polyethylene

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Full waveform inversion based on hybrid gradient

引用

Petroleum Science 2024年第3期21卷 1660-1670页

作者： chuang Xie Zhi-Liang Qin Jian-hua Wang Peng song Heng-Guang Shen Sheng-Qi Yu Ben-Jun Ma Xue-Qin Liu Qingdao Innovation and Development Base Harbin Engineering UniversityQingdao266000ShandongChina Qingdao Innovation and Development Center Harbin Engineering UniversityQingdao266000ShandongChina CNOOC Research Institute Co. Ltd.Beijing100028China College of Marine Geoscience Ocean University of ChinaQingdao266100ShandongChina Weihai Sunfull Geophysical Exploration Equipment Co. Ltd.Weihai264209ShandongChina

The low-wavenumber components in the gradient of full waveform inversion(FWI)play a vital role in the stability of the ***,when FWI is implemented in some high frequencies and current models are not far away from the real velocity model,an excessive number of low-wavenumber components in the gradient will also reduce the convergence rate and inversion *** solve this problem,this paper firstly derives a formula of scattering angle weighted gradient in FWI,then proposes a hybrid *** hybrid gradient combines the conventional gradient of FWI with the scattering angle weighted gradient in each inversion frequency band based on an empirical formula derived *** weighted hybrid mode,we can retain some low-wavenumber components in the initial lowfrequency inversion to ensure the stability of the inversion,and use more high-wavenumber components in the high-frequency inversion to improve the convergence *** results of synthetic data experiment demonstrate that compared to the conventional FWI,the FWI based on the proposed hybrid gradient can effectively reduce the low-wavenumber components in the gradient under the premise of ensuring inversion *** also greatly enhances the convergence rate and inversion accuracy,especially in the deep part of the *** the field marine seismic data experiment also illustrates that the FWI based on hybrid gradient(HGFWI)has good stability and adaptability.

关键词： Full waveform inversion Hybrid gradient Scattering angle weighted Low-wavenumber component

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Radical involved reactive wetting and retarding mechanism of alumina refractory ceramic by molten slags under weak static magnetic field

引用

Journal of Iron and Steel Research International 2024年第6期31卷 1355-1366页

作者： Sheng-hao Li Ao huang Fan-bo Zeng Hui Peng Hao-ran Wei Xue-chun huang Sheng-qiang song hua-zhi Gu The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina

High alumina slag will cause severe corrosion at the interface of alumina refractory,and the wetting behavior of slag is a key factor influencing the corrosion resistance of refractory *** static magnetic field is a promising solution for improvement in the slag resistance of *** wetting of alumina refractory ceramics with different basicities of high alumina slags under a weak static magnetic field was analyzed,given that a weak static magnetic field can affect the corrosion behavior of refractory *** slag S_(3) as an example,when there was an external static magnetic field of 1.0 mT at 1600 ℃,the thickness of calcium aluminate reaction layer at the interface decreased by 36.7%,the denting depth of interface decreased by 35.6%,and the apparent wetting angle increased by 20%.The living radicals and their formation path in oxide melts were verified by first-principles calculation combined with electron paramagnetic resonance spectroscopy *** influence of the flux density of a weak static magnetic field on the wetting behavior of slags was also *** contact angle of the slags increased owing to the inhibitory effect of magnetic field on the radicalinvolved reaction at the interface of the slag and the alumina refractory *** relationships between the magnetic flux density,diffusion coefficient,slag microstructure(hyperfine coupling constant),and contact angle were *** provides a theoretical basis for the field control of radical involved reactive wetting between inorganic oxide slags and solid oxide ceramics.

关键词： Alumina refractory ceramic Molten slag Weak magnetic field effect Reactive wetting Free radical

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：