检索结果-南通市图书馆

Communications in Computational Physics 2006年第2期1卷 362-382页

作者： h.T.Banks K.ito J.Toivanen Center for Research in Scientific Computation Box 8205North Carolina State UniversityRaleighNC 27695-8205USA

The electromagnetic backscattering of a crosscut of a cruise missile coated by a thin homogeneous layer made of radar absorbent material is modeled using a finite element *** on the radar cross section and a reflection coefficient,optimization problems are formulated for evaders and interrogators leading to optimal material parameters for the coating and optimal monostatic radar operating frequencies,*** coating materials are constructed for several radar *** only dielectric permittivity gives a narrow frequency range of high absorption while also tuning magnetic permeability widens it *** the coating layers considered do not provide substantial reduction of backscattering in the entire frequency range from 0.2 to 1.6 *** experiments also demonstrate that the reflection coefficient based on a simple planar geometry can predict well the strength of radar cross section in the sector of interest with a substantially reduced computational burden.

关键词： Radar cross section radar absorbent material optimization finite element model

Synchronous multiple lung cancers with hilar lymph node metastasis of small cell carcinoma:A case report

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

世界临床病例杂志 2023年第25期11卷 5919-5925页

作者： Ryusei Yoshino Nana Yoshida Shunsuke Yasuda Akane ito Masaki Nakatsubo Sayaka Yuzawa Masahiro Kitada Thoracic Surgery and Breast Surgery Asahikawa Medical UniversityAsahikawa 078-8510Japan Diagnostic Pathology Asahikawa Medical University HospitalHokkaido 078-8510Japan

BACKGROUND Synchronous multiple lung cancers are rare and refer to the simultaneous presence of two or more primary lung tumors,which present significant challenges in terms of diagnosis and *** SUMMARY We report a case of multiple synchronous lung cancers with hilar lymph node metastasis of small cell carcinoma of unknown origin in a 73-year-old *** lung biopsy revealed squamous cell *** enlargement of lymph node 12u was detected,no distant metastases were *** patient was preoperatively diagnosed with T1cN0M0 and underwent thoracoscopic right upper lobectomy with nodal dissection(ND2a).Based on histopathological findings,the primary lesion was squamous cell carcinoma.A microinvasive adenocarcinoma was also observed on the cranial side of the primary *** were detected in two resected lymph nodes(#12u and#11s).Both tumors were pathologically diagnosed as small cell *** primary lesion of the small cell carcinoma could not be identified even by whole-body imaging;however,chemotherapy was initiated for hilar lymph node metastasis of the small cell carcinoma of unknown *** Multiple synchronous lung cancers can be accompanied by hilar lymph node metastasis of small cell carcinomas of unknown origin.

关键词： Small cell carcinoma Synchronous multiple lung cancers Squamous cell carcinoma Adenocarcinoma Chemotherapy Case report

Imbricate structure of the Otakeyama area, Okayama Permian Yoshii Group in the Prefecture, southwest Japan

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Earth Science 2015年第1期9卷 152-163页

作者： Tsuyoshi ito Atsushi MATSUOKA State Key Laboratory of Geo-processes and Mineral Resources China University of Geosciences Wuhan 430074 China Department of Geology Faculty of Science Niigata University Niigata 950-2181 Japan

The Yoshii Group of the Akiyoshi terrane is distributed over the Otakeyama area, Okayama Prefecture, southwest Japan. The Yoshii Group is composed of siliceous rocks and clastics, comprising chert-clastic sequences. The Yoshii Group is divided into four structural units （Units Ot 1, Ot 2, Ot 3, and Ot 4） in structurally ascending order. Lithological similarities and radiolarian age suggest that these units exhibit almost identical ocean plate stratigraphy. These units are structurally-repeated to form an imbricate structure. This structure was possibly formed by off-scrape accretion at a toe of an accretionary complex. Additionally, a review of previous studies indicates that an imbricate structure is common in the Akiyoshi terrane. The presence of an imbricate structure in the Akiyoshi terrane, Permian accretionary complex, indicates the possibility that a specific horizon of Permian pelagic sequences acted as a drcollement zone.

关键词： accretionary complex imbricate structure,Permian radiolafia Yoshii Group Okayama Prefecture,southwest Japan

Reduce Malicious Activity in Trusted Programs

在线全文

学校读者我要写书评

暂无评论

Journal of Computer and Communications 2022年第10期10卷 34-49页

作者： Elliot ito Depeng Li Department of Information and Computer Sciences University of Hawaii at Manoa Honolulu USA

The malicious activity comes in many forms, but many can come through trusted applications that we commonly use. Current systems have the capability to reduce damages, but implementations for the reduction are either outside of the system or are implemented in a manner that is unintuitive or confusing to users. In this paper, an access control method has been proposed that focuses on the alleviation of damage caused by such applications through the interactions between the user, application, and computer system. In details, the proposed model would work as a module or an interceptor to delegate permissions to applications through user input by using existing system calls. The evaluation about the proposed model as well as the first step implementation can show better security protection than existing systems.

关键词： Malicious Activity

Visible light-curable polymers for biomedical applications

维普期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2014年第4期57卷 510-521页

作者： ZhOU Di ito Yoshihiro Emergent Bioengineering Materials Research Team RIKEN Center for Emergent Matter Science Jiangsu Key Laboratory of Advanced Functional Materials School of Chemistry and Material EngineeringChangshu Institute of Technology

Photocurable systems, which offer advantages such as microfabrication and in situ fabrication, have been widely used as dental restorative materials. Because the visible light-curable(VLC) system causes no biological damage, it is popular as a dental material and is being investigated by many researchers for other medical applications. here, the principle of the VLC system is explained and recent progress in key components including photoinitiators, monomers, macromers, and prepolymers is discussed. Finally, biomedical applications for drug delivery and soft tissue engineering are reviewed. Considering the recent development of VLC systems, its importance in the field of medical applications is expected to continue to increase in the future.

关键词：医疗应用光固化聚合物医学领域大分子单体固化系统生物医学应用牙科材料微细加工

Periodical shedding of cloud cavitation from a single hydrofoil in high-speed cryogenic channel flow

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2009年第1期18卷 58-64页

作者： Yutaka ito Koichi SETO Takao NAGASAKI Tokyo Institute of Technology

In order to explain criteria for periodical shedding of the cloud cavitation, flow patterns of cavitation around apiano-convex hydrofoil were observed using a cryogenic cavitation tunnel of a blowdown type. Two hydrofoils ofsimilarity of 20 and 60 mm in chord length with two test sections of 20 and 60 mm in width were *** fluids were water at ambient temperature, hot water and liquid nitrogen. The parameter range was variedbetween 0.3 and 1.4 for cavitation number, 9 and 17 m/sec for inlet flow velocity, and -8° and 8~ for the flow incidenceangle, respectively. At incidence angle 8°, that is, the convex surface being suction surface, periodicalshedding of the whole cloud cavitation was observed on the convex surface under the specific condition withcavitation number and inlet flow velocity, respectively, 0.5, 9 m/sec for liquid nitrogen at 192℃ and 1.4, 11 m/secfor water at 88℃, whereas under the supercavitation condition, it was not observable. Periodical shedding ofcloud cavitation occurs only in the case that there are both the adverse pressure gradient and the slow flow regionon the hydrofoil.

关键词：空泡流非稳态现象流动控制可视化工程热物理学

PhOTOChROMISM AND LUMINESCENCE OF DOPANT ChROMOPhORES ThROUGh TWO-PhOTON IONIZATION IN POLYMER FILMS

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2001年第2期19卷 129-134页

作者： Masahide Yamamoto hideo Ohkita Shinzaburo ito Faculty of Science and Engineering Ritsumeikan University Kusatsu Shiga 525-8577 JapanDepartment of Polymer Chemistry Graduate School of Engineering Kyoto University Sakyo Kyoto 606-8501 JapanDepartment of Polymer Chemistry Graduate School of Engineering Kyoto University Sakyo Kyoto 606-8501 Japan

Two-photon ionization and recombination processes of an aromatic chromophore doped in polymer films werestudied and the features of these processes were discussed in relation to photofunctional polymers, An aromatic moleculehaving low ionization potential, e.g., N,N,N',N'-tetramethyl-p-phenylene diamine doped in poly(methyl methacrylate)(PMMA) film was easily photoionized by intense laser ligh excitation, giving a colored radical cation (photochromism) anda trapped electron in PMMA matrix. As a reversed process, the radical cation recombined with the trapped electron, showingdiscoloration and emitting luminescence, either isothermal luminescence (ITL), or thermoluminescence (TL). In this report,ITL and TL through the charge recombination process were studied and the luminescence was suggested as a mean of the read-out of photorecording.

关键词： Two-photon ionization Photochromism Charge recombination Trapped electron Isothermal luminescence Thermoluminescence Aromatic amines Poly(methyl methacrylate)

Three-dimensionally Perforated Calcium Phosphate Ceramics

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2005年第B12期20卷 223-225页

作者： Atsuo ito T Sakurai Y Sogo M Ikeuchi h Ohgushi T Mutsuzaki Institute for human Science and Biomedical Engineering National Institute of Advanced Industrial Science and Technology Central 6 1-1-1 Higashi Tsukuba 305-8566 Japan Research Institute for Cell Engineering National Institute of Advanced Industrial Science and TechnologyAmagasaki Site 3-11-46 Nakouji Amagasaki Hyogo 661-0974 Japan Department of Orthopedic Surgery University of Tsukuba 1-1-1 Tennodai Tsukuba 305-8571 Japan

Porous calcium phosphate ceramics were produced by compression molding using a special mold followed by sintering. The porous calcium phosphate ceramics have three-dimensional and penetrated open pores 380-400μm in diacneter spaced at intervals of 200μm. The layers of the linear penetration pores alternately lay perpendicular to pore direction. The porosity was 59%-65% . The Ca/ P molar ratios of the porous calcium phos phate ceramics range from 1.5 to 1.85. A binder cantaining methyl cellulose was most effective for preparing the powder compact among vinyl acetate, polyvinyl alcohol, starch, stearic acid, methyl cellulose and their mixtures . Stainless steel, polystyrene, nylon and bamboo were used as the long columnar dies for the penetrated open pores. When polystyrene, nylon and bamboo were used as the long columnar male dies, the dies were burned oat during the sintering process. Using stainless steel as the male dies with the removal of the dies before heat treatment resulted in a higher level of densification of the calcium phosphate ceramic.

关键词： calcium phosphate porous ceramic three-dimensionally perforated tissue engineering scaffold tricalcium phosphate

Large Eddy Simulation of Methane Non-premixed Flame Using the Laminar Flamelet Model

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2011年第6期20卷 534-542页

作者： Mari Mitani Yuta ito Nobuhiko Yamasaki Department of Aeronautics and Astronautics Kyushu University

The large eddy simulation (LES) using the steady laminar flamelet model is applied to a simple turbulent jet flame with 33.2% h2,22.1% Ch4 and 44.7% N2 at the Reynolds number of 15,200 in order to validate the numerical methods and to investigate the flame *** the validation,the detailed experimental data of DLR-A flame is *** numerical results are in reasonable agreement with experimental results except mass fractions of minor *** the flow field,the break-down of the potential core,the vortex structure and the mixing intensity are well *** the combustion field,mass fractions of major species (h2O,CO2,CO) are well predicted *** species are well predicted *** the present study,the simulations conducted on the Cartesian and cylindrical grids with approximately 6.6× 10 5 nodes are compared.

关键词：小火焰模型大涡模拟预混火焰层流甲烷数值方法数据验证质量分数

Modeling of numerical simulation and experimental verification for carburizing-nitriding quenching process

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2006年第B2期16卷 566-571页

作者： R. MUKAI T. MATSUMOTO JU Dong-ying T. SUZUKI h. SAito Y. ito high-Tech Research Center Special Researcher Saitama Institute of Technology Fukaya 369-0293 Japan Department of Mechanical Engineering Saitama Institute of Technology Fukaya 369-0293 Japan Research Center of high Technology Anshan University of Science and Technology Anshan 114044 China Department of Technology Development Tobuyakin Ltd. Japan

A model considering quantitative effects of diffused carbon and nitrogen gradients and kinetics of phase transformation is presented to examine metallo-thermo-mechanical behavior during carburized and nitrided quenching. Coupled simulation of diffusion, phase transformation and stress/strain provides the final distribution of carbon and nitrogen contents as well as residual stress and distortion. Effects of both transformation and lattice expansion induced by carbon and nitrogen absorption were introduced into calculating the evolution of the internal stress and strain. In order to verify the method and the results, the simulated distributions of carbon and nitrogen content and residual stress/strain of a ring model during carburized and nitrided quenching were compared with the measured data.

关键词：金属热处理渗碳渗氮淬火过程数值模拟模型实验验证