检索结果-南通市图书馆

Optimizing Average Electric Power During the Charging of Lithium-Ion batteries Through the Taguchi Method

Transactions of Tianjin University 2024年第2期30卷 152-166页

作者： Mohd h.s.Alrashdan Department of Electrical Engineering Al-Hussein Bin Talal UniversityMaan 71110Jordan

In recent times, lithium-ion batteries have been widely used owing to their high energy density, extended cycle lifespan, and minimal self-discharge rate. The design of high-speed rechargeable lithium-ion batteries faces a significant challenge owing to the need to increase average electric power during charging. This challenge results from the direct influence of the power level on the rate of chemical reactions occurring in the battery electrodes. In this study, the Taguchi optimization method was used to enhance the average electric power during the charging process of lithium-ion batteries. The Taguchi technique is a statistical strategy that facilitates the systematic and efficient evaluation of numerous experimental variables. The proposed method involved varying seven input factors, including positive electrode thickness, positive electrode material, positive electrode active material volume fraction, negative electrode active material volume fraction, separator thickness, positive current collector thickness, and negative current collector thickness. Three levels were assigned to each control factor to identify the optimal conditions and maximize the average electric power during charging. Moreover, a variance assessment analysis was conducted to validate the results obtained from the Taguchi analysis. The results revealed that the Taguchi method was an eff ective approach for optimizing the average electric power during the charging of lithium-ion batteries. This indicates that the positive electrode material, followed by the separator thickness and the negative electrode active material volume fraction, was key factors significantly infl uencing the average electric power during the charging of lithium-ion batteries response. The identification of optimal conditions resulted in the improved performance of lithium-ion batteries, extending their potential in various applications. Particularly, lithium-ion batteries with average electric power of 16 W and 17

关键词： Lithium-ion batteries Average electric power during charging Taguchi method COMsOL Multiphysics software C rate L27 orthogonal array

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

引用

Applied Mathematics and Mechanics(English Edition) 2024年第3期45卷 543-562页

作者： h.M.FEIZAbaD M.h.YAs Department of Mechanical Engineering Razi UniversityKermanshah ***Iran

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent *** fibers are renowned for their good mechanical properties,abundance,and short cycle *** beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFrC)beams on the elastic *** different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the *** elastic properties of the composite are determined with the law of *** hamilton’s principle,the governing equations of motion are *** generalized differential quadrature method(GDQM)is then applied to the equations to obtain the *** achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam ***,a comparative study is conducted between the derived analysis outcomes for BFrC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber ***,the obtained analysis results of BFrC beams are also compared with those for carbon nanotube reinforced composite(CNTrC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFrC beams are lower than those of CNTrC beams.

关键词： bamboo fiber free vibration buckling analysis functionally graded(FG)beam elastic foundation generalized differential quadrature method(GDQM)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Deformable microlaser force sensing

引用

Light(science & Applications) 2024年第6期13卷 1196-1209页

作者： Eleni Dalaka Joseph shill Jonathan h.h.Booth Anna Popczyk stefan r.Pulver Malte C.Gather Marcel schubert Centre of Biophotonics SUPASchool of Physics and AstronomyUniversity of St AndrewsNorth HaughSt AndrewsUK humboldt Centre for Nano-and Biophotonics Department of ChemistryUniversity of CologneKölnGermany school of Psychology and Neuroscience University of St AndrewsSt Mary’s QuadSouth StreetSt AndrewsUK Institute for Bioengineering of Catalonia BarcelonaSpain

Mechanical forces are key regulators of cellular behavior and function,affecting many fundamental biological processes such as cell migration,embryogenesis,immunological responses,and pathological *** force sensors and imaging techniques have been developed to quantify these otherwise invisible forces in single cells and in ***,current techniques rely heavily on high-resolution microscopy and do not allow interrogation of optically dense tissue,reducing their application to 2D cell cultures and highly transparent biological ***,we introduce DEFOrM,deformable microlaser force sensing,a spectroscopic technique that detects sub-nanonewton forces with unprecedented spatio-temporal *** is based on the spectral analysis of laser emission from dye-doped oil microdroplets and uses the force-induced lifting of laser mode degeneracy in these droplets to detect nanometer *** validation by atomic force microscopy and development of a model that links changes in laser spectrum to applied force,DEFOrM is used to measure forces in 3D and at depths of hundreds of microns within tumor spheroids and late-stage Drosophila *** furthermore show continuous force sensing with single-cell spatial and millisecond temporal resolution,thus paving the way for non-invasive studies of biomechanical forces in advanced stages of embryogenesis,tissue remodeling,and tumor invasion.

关键词： invasion otherwise hundreds

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Comprehensive review on Charging Topologies and Power Electronic Converter solutions for Electric Vehicles

引用

Journal of Modern Power systems and Clean Energy 2024年第3期12卷 675-694页

作者： Abdelfatah Ali hossam h.h.Mousa Mostafa F.shaaban Maher A.Azzouz Ahmed s.A.Awad the Department of Electrical Engineering American University of Sharjah26666 SharjahUnited Arab Emirates the Department of Electrical Engineering South Valley University83523 QenaEgypt the Department of Electrical and Computer Engineering University of WindsorWindsorON N9B 3P4 Canada Electrical Engineering Department Qatar UniversityDoha 2713Qatar Department of Electrical and Computer Engineering Sultan Qaboos UniversityMuscat123Oman

Electric vehicles(EVs)are becoming more popular worldwide due to environmental concerns,fuel security,and price *** performance of EVs relies on the energy stored in their batteries,which can be charged using either AC(slow)or DC(fast)***,EVs can also be used as mobile power storage devices using vehicle-to-grid(V2G)*** electronic converters(PECs)have a constructive role in EV applications,both in charging EVs and in ***,this paper comprehensively investigates the state of the art of EV charging topologies and PEC solutions for EV *** examines PECs from the point of view of their classifications,configurations,control approaches,and future research prospects and their impacts on power *** can be classified into various topologies:DC-DC converters,AC-DC converters,DC-AC converters,and AC-AC *** address the limitations of traditional DC-DC converters such as switching losses,size,and high-electromagnetic interference(EMI),resonant converters and multiport converters are being used in high-voltage EV ***,power-train converters have been modified for high-efficiency and reliability in EV *** paper offers an overview of charging topologies,PECs,challenges with solutions,and future trends in the field of the EV charging station applications.

关键词： Charging station charging topology electric vehicle power electronic converter vehicle-to-grid

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Novel synthesis of stabilized Bi_(1-x-y)Gd_(x)Dy_(y)O_(1.5) solid electrolytes with enhanced conductivity for intermediate temperature solid oxide fuel cells(sOFCs)

引用

Journal of rare Earths 2024年第10期42卷 1903-1911页

作者： Ahmed h.Ibrahim Yehia M.Abbas h.A.Ayoub Marwa h.Ali Mustafa Aldoori Materials science Laboratory Physics DepartmentFaculty of ScienceSuez Canal University41522IsmailiaEgypt Ministry of higher Education and scientific research Aliraqia University10011BaghdadIraq

herein,we report the synthesis of a Dy-Gd co-doped cubic phase-stabilized Bi_(2)O_(3) solid electrolyte system via solid-state processing under atmospheric *** with Dy^(3+) and Gd^(3+) has been observed to significantly enhance the densification process during sintering for stabilization purposes,thereby improving the electrical properties of δ-Bi_(2)O_(3)-type *** synthesized ceramics were characterized using X-ray diffraction(XrD),field emission scanning electron microscopy-energy dispersive X-ray spectroscopy(FEsEM-EDX),thermal gravimetry/differential thermal analysis(TG/DTA),and the four-point probe technique(4PPT).XrD analysis reveals that the samples Bi_(1-x-y)Gd_(x)Dy_(y)O_(1.5)(y=0.05/x=0.05,0.10,0,15,and 0.20,and x=0.05/y=0.10,0.15,and 0.20) exhibit a stable face-centered cubic δ-phase and a mixed-phase crystallographic *** XrD analysis of the stabilized δ-phase suggests that the prepared oxides show a face-centered cubic(FCC) structure with a space group of *** micrographs reveal that the composition Bi_(0.90)Gd_(0.05)Dy_(0.05)O_(1.5) has no significant ***,an evident increase in the pore formation is observed as the amount of Gd_(2)O_(3) increases until it reaches 20%.This finding suggests that dense pellets are formed during the sintering process at 900-1000℃.The DTA analyses were performed to verify the phase stability,which agrees with the XrD *** electrochemical performance of the synthesized Dy-Gd co-doped Bi_(2)O_(3)solid electrolyte system was evaluated and analyzed in detail by using the electrochemical impedance spectroscopy(EIs) technique,based on EIs and conductivity measurements,Bi_(0.75)Gd_(0.20)Dy_(0.05)O_(1.5) exhibits the lowest activation energy of 0.519 eV and the highest conductivity value of 0.398 s/cm at 627℃compared to the other samples;this composition can be used as a solid electrolyte for intermediatetemperature solid oxide fuel cells(sOFCs).

关键词： solid oxide fuel cells(sOFCs) rare earths solid-state processing rietveld Fast Fourier transform(FFT) Electrochemical impedance spectroscopy(EIs)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cr-induced fusion reactions to synthesize superheavy elements

引用

Nuclear science and Techniques 2024年第5期35卷 122-130页

作者： s.Madhu h.C.Manjunatha N.sowmya B.M.rajesh L.seenappa r.s.susheela Department of Physics R V College of EngineeringBangalore 560074India Visvesvaraya Technological University BelagaviKarnataka 590018India Department of Physics Government First Grade CollegeSrinivasapurKarnataka 563135India Department of Physics Government First Grade CollegeDevanahallyKarnataka 562110India Department of Physics Government First Grade CollegeMulbagalKarnataka 563131India Department of Physics Government First Grade collegeNanjangudOoty RoadMysore 571301India

We investigated ^(50,52-54)Cr-induced fusion reactions for the synthesis of the superheavy element in the 104≤Z≤122 *** cross sections produced in this investigation using ^(54)Cr projectiles were compared with those obtained in prior *** estimated cross sections from this analysis are consistent with the findings of prior *** the current study,the predicted cross section was found to be 42fb at 236 MeV for ^(53)Cr+^(243)Am,23.2 fb at 236 MeV for ^(54)Cr+^(247)Cm,95.6 fb at 240 MeV for ^(53)Cr+248Bk,and 1.33 fb at 242 MeV for ^(53)Cr+***,these projected cross sections with excitation energy and beam energy will be useful in future Cr-induced fusion reaction investigations.

关键词： Fusion cross sections Compound nucleus formation probability survival probability Evaporation residue cross sections

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

MgO-attached graphene nanosheet(MgO@GNs)reinforced magnesium matrix nanocomposite with superior mechanical,corrosion and biological performance

引用

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 2062-2076页

作者： s.Abazari A.shamsipur h.r.bakhsheshi-rad M.s.soheilirad F.Khorashadizade s.s.Mirhosseini Department of Materials and Metallurgical Engineering Amirkabir University of TechnologyTehran ***Iran Iranian National standards Organization of hormozgan HormozganIran Advanced Materials research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran Department of Materials and Metallurgical Engineering Iran University of Science and TechnologyTehranIran

Magnesium(Mg)alloys are gaining great consideration as body implant materials due to their high biodegradability and ***,they suffer from low corrosion resistance and antibacterial *** this research,semi-powder metallurgy followed by hot extrusion was utilized to produce the magnesium oxide@graphene nanosheets/magnesium(MgO@GNs/Mg)composite to improve mechanical,corrosion and cytocompatibility *** have revealed that the incorporation of MgO@GNs nanohybrids into Mg-based composite enhanced microhardness and compressive *** vitro,osteoblast cell culture tests show that using MgO@GNs nanohybrid fillers enhances osteoblast adhesion and apatite *** presence of MgO@GNs nanoparticles in the composites decreased the opening defects,micro-cracks and micro-pores of the composites thus preventing the penetration of the corrosive solution into the *** demonstrated that the MgO@GNs/Mg composite possesses excellent antibacterial properties because of the combination of the release of MgO and physical damage to bacterium membranes caused by the sharp edges of graphene nanosheets that can effectively damage the cell wall thereby facilitating penetration into the bacterial lipid ***,the MgO@GNs/Mg composite with high mechanical strength,antibacterial activity and corrosion resistance is considered to be a promising material for load-bearing implant applications.

关键词： metal matrix composites MgO@GNs nanohybrid strengthening mechanisms antibacterial activity biocompatibility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Exploring one material for dual applications:A red-emitting Mg_(2)GeO_(4):Eu^(3+)nanophosphor for future generation energy efficient WLEDs and dosimetric applications

引用

Journal of rare Earths 2024年第10期42卷 1835-1845页

作者： Akshay Arjun G.P.Darshan s.C.sharma h.Nagabhushana D.V.sunitha h.B.Premkumar Department of Physics Faculty of Mathematical and Physical SciencesM.S.Ramaiah University of Applied SciencesBengaluru560054India honorary Professor of Law and Forensic Materials Jain UniversityBengaluru560069India C.N.r.rao Centre for Advanced Materials Tumkur UniversityTumkur572103India school of Applied sciences(Physics) REVA UniversityBengaluru560064India

The envisaged design and developme nt of individual mate rials to excavate a broader spectrum of desired properties and offer multiple applications are highly *** this in mind,a series of forsterite-structured Mg_(2)GeO_(4):Eu^(3+)(1 mol%-9 mol%)nanophosphors was synthesized via a solution combustion method using oxalyl dihydrazide as a *** X-ray diffraction patterns confirm the orthorhombic crystal system with a Puma space *** results clearly show irregularly shaped cluster-like structures with aggregation of the *** diffuse reflectance spectra,the optical energy band gap of the Mg_(2)GeO_(4):Eu^(3+)(1 mol%-9 mol%)nanophosphors was estimated and obtained to be~4.12-4.32 *** photoluminescence emission spectra exhibit intense peaks at^(5)79,589,610,661,and 707 nm,which are due to characteristic^(5)D_(0)→^(7)F_(0),^(5)D_(0)→^(7)F_(1),^(5)Do→^(7)F_(2),^(5)D_(0)→^(7)F_(3)and^(5)D_(0)→^(7)F_(4)transitions of Eu^(3+)ions,*** Commission International de L'Eclairage color coordinates are gradually tuned from pale red(0.5980,0.4012)to a pure red(0.6385,0.3611)*** glow peaks showcase excellent super-linear response at low doses ofγ-irradiations,indicating that the prepared phosphor can be used in thermoluminescent personal dosimetry which is a biological tissue *** aforementioned results demonstrate that the prepared Mg_(2)GeO_(4):Eu^(3+)(1 mol%-9 mol%)nanophosphors are considered an excellent candidate for dual applications,i.e.,red component in future generation white-light-emitting diodes(WLEDs)and personal dosimetric applications.

关键词： Nanophosphors Photoluminescence Thermoluminescence Dosimetry Photometric properties rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fast efficient photon deceleration in plasmas by using two laser pulses at different frequencies

引用

Matter and radiation at Extremes 2024年第3期9卷 11-18页

作者： Y.X.Wang X.L.Zhu s.M.Weng P.Li X.F.Li h.Ai h.r.Pan Z.M.sheng Key Laboratory for Laser Plasmas(moe) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghai 200240China Collaborative Innovation Center of IFsA Shanghai Jiao Tong UniversityShanghai 200240China research Center of Laser Fusion of China Academy of Engineering Physics MianyangSichuan 621900China state key Laboratory of high Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Tsung-dao Lee Institute Shanghai Jiao Tong UniversityShanghai 200240China

The generation of ultrashort high-power light sources in the mid-infrared(mid-Ir)to terahertz(Thz)range is of interest for applications in a number of fields,from fundamental research to biology and *** conventional laser technology,photon deceleration in plasma wakes provides an alternative approach to the generation of ultrashort mid-Ir or Thz ***,we present a photon deceleration scheme for the efficient generation of ultrashort mid-Ir or Thz pulses by using an intense driver laser pulse with a relatively short wavelength and a signal laser pulse with a relatively long *** signal pulse trails the driver pulse with an appropriate time delay such that it sits at the front of the second wake bubble that is driven by the driver *** to its relatively long wavelength,the signal pulse will be subjected to a large gradient of the refractive index in the plasma wake ***,the photon deceleration in the plasma wake becomes faster and more efficient for signal pulses with longer *** greatly enhances the capacity and efficiency of photon deceleration in the generation of ultrashort high-power light sources in the long-wavelength Ir and Thz spectral ranges.

关键词： laser ultrashort photon

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

On an isotropic porous solid cylinder:the analytical solution and sensitivity analysis of the pressure

引用

Applied Mathematics and Mechanics(English Edition) 2024年第9期45卷 1499-1522页

作者： h.AsGhArI L.MILLEr r.PENTA J.MErODIO Departamento de Matematica Aplicada a las TIC ETS de Ingenieria de Sistemas InformaticosUniversidad Politecnica de MadridMadrid 28031Spain school of Mathematics and statistics University of GlasgowGlasgow G128QQU.K.

Within this work,we perform a sensitivity analysis to determine the influence of the material input parameters on the pressure in an isotropic porous solid *** provide a step-by-step guide to obtain the analytical solution for a porous isotropic elastic cylinder in terms of the pressure,stresses,and elastic *** obtain the solution by performing a Laplace transform on the governing equations,which are those of Biot's poroelasticity in cylindrical polar *** enforce radial boundary conditions and obtain the solution in the Laplace transformed domain before reverting back to the time *** sensitivity analysis is then carried out,considering only the derived pressure *** analysis finds that the time t,Biot's modulus M,and Poisson's ratio ν have the highest influence on the pressure whereas the initial value of pressure P_(0) plays a very little role.

关键词： sensitivity analysis Laplace transform cylindrical polar coordinate Biot's modulus cylinder

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：