检索结果-南通市图书馆

Journal of Iron and Steel Research(International) 2024年第7期31卷 1582-1589页

作者： Yong-chao Han zhi-he Dou Rui zhang Ting-an zhang Shuai Fang Key Laboratory for Ecological Metallurgy of Multimetallic Ores(Ministry of Education) Shenyang 110819LiaoningChina School of Metallurgy Northeastern UniversityShenyang 110819LiaoningChina

To comprehensively utilize the low-iron high-vanadium-titanium magnetite,a new method of vortex smelting reduction of vanadium-titanium magnetite was proposed,and the enrichment and reconstitution regularity of Ti-bearing phases in the slag was investigated through X-ray fluorescence spectrometry,X-ray photoelectron spectroscopy,X-ray diffraction analysis,and optical *** phase diagram revealed that the preferential crystallization of MgTi_(2)O_(5) can be achieved by adjusting the CaO,MgO,and TiO_(2) contents of *** predominant Ti-bearing phases in the slag obtained from the reduction process are MgxTi_(3_x)O_(5)(0≤x≤1)and CaTiO_(3).FeTiO_(3) is present at carbon-iron ratio(CR)=1.3,while MgTi_(2)O4 and TiC are formed at CR=*** enrichment of TiO_(2) in the slag increases first and then decreases as the CR increases,and at CR=1.1,the enrichment of TiO_(2) in the slag reaches 51.3 wt.%.Additionally,the concentrations of MgxTi_(3_x)O_(5)(0≤x≤1)and CaTiO_(3) in the slag,along with the grain width of MgxTi_(3_x)O_(5)(0≤x≤1),decrease with the increase in CR.

关键词： Vanadium-titanium magnetite Vortex smelting reduction Phase reconfiguration TiO_(2)enrichment

Intermittent disturbance mechanical behavior and fractional deterioration mechanical model of rock under complex true triaxial stress paths

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第1期34卷 117-136页

作者： zhi Zheng Hongyu Xu Kai zhang guangliang Feng Qiang zhang Yufei Zhao State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures Key Laboratory of Disaster Prevention and Structural Safety of Ministry of EducationCollege of Civil Engineering and ArchitectureGuangxi UniversityNanning 530004China State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan 430071China State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin China Institute of Water Resources and Hydropower ResearchBeijing 100080China State Key Laboratory for Geomechanics and Deep Underground Engineering China University of Mining and TechnologyXuzhou 221116China

Mechanical excavation,blasting,adjacent rockburst and fracture slip that occur during mining excavation impose dynamic loads on the rock mass,leading to further fracture of damaged surrounding rock in three-dimensional high-stress and even causing ***,a novel complex true triaxial static-dynamic combined loading method reflecting underground excavation damage and then frequent intermittent disturbance failure is *** triaxial static compression and intermittent disturbance tests are carried out on *** effects of intermediate principal stress and amplitude on the strength characteristics,deformation characteristics,failure characteristics,and precursors of monzogabbro are analyzed,intermediate principal stress and amplitude increase monzogabbro strength and tensile fracture *** increases in microseismic parameters during rock loading can be precursors for intermittent rock *** on the experimental result,the new damage fractional elements and method with considering crack initiation stress and crack unstable stress as initiation and acceleration condition of intermittent disturbance irreversible deformation are proposed.A novel three-dimensional disturbance fractional deterioration model considering the intermediate principal stress effect and intermittent disturbance damage effect is established,and the model predicted results align well with the experimental *** sensitivity of stress states and model parameters is further explored,and the intermittent disturbance behaviors at different f are *** study provides valuable theoretical bases for the stability analysis of deep mining engineering under dynamic loads.

关键词： True triaxial static and disturbance test Mechanical properties Failure mechanism and precursor Intermittent disturbance effect Fractional mechanical model

A Novel Disturbance Observer Based Fixed-Time Sliding Mode Control for Robotic Manipulators With Global Fast Convergence

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第3期11卷 661-672页

作者： Dan zhang Jiabin Hu Jun Cheng Zheng-guang Wu Huaicheng Yan IEEE Zhejiang University of Technology guangxi Normal University Zhejiang University the East China University of Science and Technology

This paper proposes a new global fixed-time sliding mode control strategy for the trajectory tracking control of uncertain robotic ***,a fixed-time disturbance observer(FTDO) is designed to deal with the adverse effects of model uncertainties and external disturbances in the manipulator *** an adaptive scheme is used and the adaptive FTDO(AFTDO) is developed,so that the priori knowledge of the lumped disturbance is not ***,a new non-singular fast terminal sliding mode(NFTSM) surface is designed by using an arctan function,which helps to overcome the singularity problem and enhance the robustness of the *** on the estimation of the lumped disturbance by the AFTDO,a fixed-time non-singular fast terminal sliding mode controller(FTNFTSMC)is developed to guarantee the trajectory tracking errors converge to zero within a fixed *** settling time is independent of the initial state of the *** addition,the stability of the AFTDO and FTNFTSMC is strictly proved by using Lyapunov ***,the fixed-time NFESM(FTNFTSM) algorithm is validated on a 2-link manipulator and comparisons with other existing sliding mode controllers(SMCs) are *** comparative results confirm that the FTNFTSMC has superior control performance.

关键词： Disturbance observer(DO) fixed-time non-singular sliding mode control robotic manipulator trajectory tracking

Static recrystallization behaviors and mechanisms of 7Mo super-austenitic stainless steel with undissolved sigma precipitates during double-stage hot deformation

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第2期31卷 475-487页

作者： Shi-guang Xu Jin-shan He Run-ze zhang Fu-cheng zhang Xi-tao Wang Collaborative Innovation Center of Steel Technology University of Science and Technology BeijingBeijing100083China State Key Laboratory of Metastable Materials Science and Technology Yanshan UniversityQinhuangdao066004HebeiChina Shandong Provincial Key Laboratory for High Strength Lightweight Metallic Materials Advanced Materials InstituteQilu University of Technology(Shandong Academy of Science)Jinan250353ShandongChina

Static recrystallization(SRX)behaviors and corresponding recrystallization mechanisms of 7Mo super-austenitic stainless steel were studied under different deformation *** order of influence of deformation parameters on static recrystallization behaviors,from high to low,is followed by temperature,first-stage strain and strain ***,the effect of holding time on static recrystallization behaviors is significantly controlled by *** addition,with the increase in temperature from 1000 to 1200°C,the static recrystallization mechanism evolves from discontinuous static recrystallization and continuous static recrystallization(cSRX)to metadynamic recrystallization and cSRX,and finally to *** cSRX exists at all *** is because high stacking fault energy(56 mJ m−2)promotes the movement of dislocations,making the deformation mechanism of this steel is dominated by planar slip of *** undissolved sigma precipitates promote static recrystallization through particle-stimulated ***,small strain-induced precipitates at grain boundaries hinder the nucleation of conventional SRX and the growth of recrystallized grains,while the hindering effect decreases with the increase in temperature.

关键词： 7Mo super-austenitic stainless steel Double-stage hot deformation Conventional static recrystallization Metadynamic recrystallization Strain-induced precipitation

The effects of cool materials,façade orientation,and morphological parameters on energy consumption at the residential neighborhood scale

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第4期17卷 525-542页

作者： Fusuo Xu Dongdong Tian zhi Gao Jianshun Jensen zhang Department of Mechanical and Aerospace Engineering Syracuse UniversitySyracuseNY13210USA School of Architecture and Urban Planning Nanjing University22 Hankou RoadNanjingJiangsu Province210093China

Building surface cool materials are novel materials that can reduce urban heat island intensity and decrease building energy *** study investigated the impact of radiative properties of materials,façade orientation,and morphological parameters on energy consumption in six typical residential neighborhoods in Nanjing,*** neighborhood energy consumption of 16 application schemes considering the façade orientation factor is compared to determine the best energy-saving *** and annual energy-saving rates,savings in electricity costs,and the price ceiling for materials per unit area are *** results show that for low-rise buildings,using cool materials only on the roof can reduce the annual energy consumption by 1%.When cool or super cool materials are also used on the building façade,the annual energy saving rate can be up to 3.4%and 4.3%,*** cool materials on the south façade of buildings is not recommended due to significant heat loss in *** savings in electricity costs and the price ceiling for materials per unit area,the price of cool and super cool materials should be less than 3.0 and 3.7 RMB/m2,respectively,assuming a lifespan of eight years in Nanjing.

关键词： cool materials building energy saving neighborhood morphology façade orientation

Complete kinetic model for esterification reaction of lauric acid with glycerol to synthesize glycerol monolaurate

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第6期70卷 211-221页

作者： Han-Qiao Hu Yue zhang Ming Fan Yong Cai guang-Wen Chu Liang-Liang zhang Research Center of the Ministry of Education for High Gravity Engineering and Technology Beijing University of Chemical TechnologyBeijing 100029China State Key Laboratory of Organic-Inorganic Composites Beijing University of Chemical TechnologyBeijing 100029China Petrochemical Research Institute China National Petroleum CorporationBeijing 102206China

Glycerol monolaurate(GML)is a widely used industrial chemical with excellent emulsification and antibacterial *** direct esterification of glycerol with lauric acid is the main method to synthesize *** this work,the kinetic process of direct esterification was systematically studied using p-toluenesulfonic acid as catalyst.A complete kinetic model of consecutive esterification reaction has been established,and the kinetic equation of acid catalysis was *** isomerization reactions of GML and glycerol dilaurate were *** was found that the reaction was an equilibrium reaction and the reaction rate was faster than the esterification *** kinetic equations of the consecutive esterification reaction were obtained by experiments as k_(1)=(276+92261Xcat)exp(-37720/RT)and k_(2)=(80+4413Xcat)exp(-32240/RT).The kinetic results are beneficial to the optimization of operating conditions and reactor design in GML production process.

关键词： Glycerol monolaurate p-Toluenesulfonic acid Esterification Kinetics Mass transfer

Preoperative preparation and surgical separation of conjoined pygopagus twins

在线全文

学校读者我要写书评

暂无评论

Chinese Medical Journal 2010年第13期123卷 1800-1803页

作者： SUN Tian-sheng LI Shao-guang zhang zhi-cheng LI Fang GUAN Kai Department of Orthopedic Surgery Beijing Army General Hospital Beijing 100700 China

Conjoined twins are very rare with an estimated ,incidence of about 1 in 200 000 births with a male-female ratio of 1：3 The separation ot conjolned twins presents a challenge to surgeons and also a test for comprehensive efficiency of a hospital. Recently, a rare pair of pygopagus twins were admitted to our hospital and a successful surgical separation was carded out.

关键词： pygopagus conjoined twins preoperative care separation

Advances in MET tyrosine kinase inhibitors in gastric cancer

在线全文

学校读者我要写书评

暂无评论

Cancer Biology & Medicine 2024年第6期21卷 484-498页

作者： Yifan zhang Lin Shen zhi Peng Key Laboratory of Carcinogenesis and Translational Research(Ministry of Education) Department of Gastrointestinal OncologyPeking University Cancer Hospital&InstituteBeijing 100142China State Key Laboratory of Holistic Integrative Management of Gastrointestinal Cancers Beijing Key Laboratory of Carcinogenesis and Translational ResearchDepartment of Gastrointestinal OncologyPeking University Cancer Hospital&InstituteBeijing 100142China

Gastric cancer is among the most frequently occurring cancers and a leading cause of cancer-related deaths *** gastric cancer is highly heterogenous and comprised of different subtypes with distinct molecular and clinical characteristics,the management of gastric cancer calls for better-defined,biomarker-guided,molecular-based treatment *** is a receptor tyrosine kinase mediating important physiologic processes,such as embryogenesis,tissue regeneration,and wound ***,mounting evidence suggests that aberrant MET pathway activation contributes to tumour proliferation and metastasis in multiple cancer types,including gastric cancer,and is associated with poor patient *** such,MET-targeting therapies are being actively developed and promising progress has been demonstrated,especially with MET tyrosine kinase *** review aims to briefly introduce the role of MET alterations in gastric cancer and summarize in detail the current progress of MET tyrosine kinase inhibitors in this disease area with a focus on savolitinib,tepotinib,capmatinib,and *** on current knowledge,this review further discusses existing challenges in MET alterations testing,possible resistance mechanisms to MET inhibitors,and future directions of MET-targeting therapies.

关键词： Gastric cancer MET alterations MET tyrosine kinase inhibitors savolitinib MET testing

Uncertainty and sensitivity analysis of in-vessel phenomena under severe accident mitigation strategy based on ISAA-SAUP program

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第1期35卷 108-123页

作者： Hao Yang Ji-Shen Li zhi-Ran zhang Bin zhang Jian-Qiang Shan School of Nuclear Science and Technology Xi’an Jiaotong UniversityXi’an 710049China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

The phenomenology involved in severe accidents in nuclear reactors is highly ***,integrated analysis programs used for severe accident analysis heavily rely on custom empirical parameters,which introduce considerable ***,in recent years,the field of severe accidents has shifted its focus toward applying uncertainty analysis methods to quantify uncertainty in safety assessment programs,known as“best estimate plus uncertainty(BEPU).”This approach aids in enhancing our comprehension of these programs and their further development and *** study concentrates on a third-generation pressurized water reactor equipped with advanced active and passive mitigation *** an Integrated Severe Accident Analysis Program(ISAA),numerical modeling and uncertainty analysis were conducted on severe accidents resulting from large break loss of coolant *** uncertainty parameters of the ISAA program were meticulously *** Wilks'formula,the developed uncertainty program code,SAUP,was employed to carry out Latin hypercube sampling,while ISAA was employed to execute batch *** analysis was then conducted on two figures of merit,namely hydrogen generation and the release of fission products within the pressure *** calculations revealed that hydrogen production and the fraction of fission product released exhibited a normal distribution,ranging from 182.784 to 330.664 kg and from 15.6 to 84.3%,*** ratio of hydrogen production to reactor thermal power fell within the range of 0.0578–0.105.A sensitivity analysis was performed for uncertain input parameters,revealing significant correlations between the failure temperature of the cladding oxide layer,maximum melt flow rate,size of the particulate debris,and porosity of the debris with both hydrogen generation and the release of fission products.

关键词： Gen-III PWR Severe accident mitigation Wilks’formula Hydrogen Fission products Uncertainty and sensitivity analysis

UAV maneuvering decision-making algorithm based on deep reinforcement learning under the guidance of expert experience

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Engineering and Electronics 2024年第3期35卷 644-665页

作者： ZHAN guang zhang Kun LI Ke PIAO Haiyin School of Electronics and Information Northwestern Polytechnical UniversityXi’an 710072China Science and Technology on Electro-Optic Control Laboratory Luoyang 471009China

Autonomous umanned aerial vehicle(UAV) manipulation is necessary for the defense department to execute tactical missions given by commanders in the future unmanned battlefield. A large amount of research has been devoted to improving the autonomous decision-making ability of UAV in an interactive environment, where finding the optimal maneuvering decisionmaking policy became one of the key issues for enabling the intelligence of UAV. In this paper, we propose a maneuvering decision-making algorithm for autonomous air-delivery based on deep reinforcement learning under the guidance of expert experience. Specifically, we refine the guidance towards area and guidance towards specific point tasks for the air-delivery process based on the traditional air-to-surface fire control ***, we construct the UAV maneuvering decision-making model based on Markov decision processes(MDPs). Specifically, we present a reward shaping method for the guidance towards area and guidance towards specific point tasks using potential-based function and expert-guided advice. The proposed algorithm could accelerate the convergence of the maneuvering decision-making policy and increase the stability of the policy in terms of the output during the later stage of training process. The effectiveness of the proposed maneuvering decision-making policy is illustrated by the curves of training parameters and extensive experimental results for testing the trained policy.

关键词： unmanned aerial vehicle(UAV) maneuvering decision-making autonomous air-delivery deep reinforcement learning reward shaping expert experience