检索结果-南通市图书馆

Particuology 2024年第7期90卷 364-382页

作者： Barış gürel gülşah Karaca dolgun Osman İpek Ali Keçebaş department of Mechanical Engineering Engineering FacultySüleyman Demirel UniversityÇünürIspartaTurkey department of Energy Systems Engineering Technology FacultyMuğla SıtkıKoçman UniversityKötekliMenteşeMuğlaTurkey

This study delves into the combustion behavior of various lignite types within a circulating fluidized bed boiler(CFBB),with a primary focus on the impact of different bed material sphericity ratios(0.5,0.7,and 0.9).Utilizing bed material with a sphericity ratio of 0.9 sourced from theÇan power plant and verified through experimentation,the research reveals several key ***,furnace temperatures tended to rise with higher sphericity ratios,albeit with variations between lignite types,particularly highlighting the complexity of this relationship in the case of gLI-Tunçbilek *** levels in the combustion chamber remained consistent across different sphericity ratios,indicating minimal influence on pressure *** combustion efficiency,especially at the bottom of the boiler,was observed at lower sphericity levels(0.5 and 0.7)forÇan lignite,as reflected in CO_(2) mole *** NO_(x) emissions generally decreased with lower sphericity,the sensitivity to sphericity varied by lignite type,with Ilgın lignite showcasing low NO_(x) but high SO_(2) emissions,underscoring the intricate interplay between lignite properties,sphericity,and ***,this study advances our understanding of CFBB combustion dynamics,offering insights valuable for optimizing performance and emissions control,particularly in lignite-based power.

关键词： Circulating fluidized bed boiler Computational particle fluid dynamics method Particle sphericity ratios NO_(x)and SO_(2)emissions Energy production efficiency

Quantitative Mapping of Transient Thermodynamic States in Ultrafast Laser Nanostructuring of Quartz

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Ultrafast Science 2024年第2期4卷 9-18页

作者： H.d.Nguyen A.Tsaturyan S.Sao Joao r.dwivedi A.Melkonyan C.d’Amico E.Kachan J.P.Colombier g.Kermouche r.Stoian Laboratoire Hubert Curien UMR 5516 CNRSUniversite Jean Monnet42000 Saint EtienneFrance Laboratoire george Friedel UMR 5307 CNRSEcole des Mines de Saint Etienne42000 Saint EtienneFrance

Understanding material structural reaction to light is of utmost importance to advance processing resolution in ultrafast laser volume structuring into the *** thermodynamic pathways are required to quench energy transport in the most rapid manner and to confine the process to nanometer lengths,bypassing optical *** material dynamics under confinement,with in situ access to transient local temperature and density parameters,thus becomes key in understanding the *** report in situ reconstruction of thermodynamic states over the entire matter relaxation path in bulkα-quartz irradiated by ultrafast nondiffractive laser beams using time-resolved qualitative and quantitative optical phase *** dynamics indicate rapid spatially confined crystalline-to-amorphous transition to a hot dense fused silica *** exceeds 20%and the matrix temperature rises to more than 2,000 K in the first *** structural state relaxes in hundreds of *** dispersion and time design of the optical beam to picosecond durations increases the spatial confinement and triggers an extreme nanostructuring process based on nanocavitation that occurs within the amorphizing material,where the low-viscosity phase lowers the mechanical requirements for the *** feature scales of less than a tenth of the optical wavelength are obtained in the *** allows for structural and morphological nanoscale material features under 3d confinement that can engineer optical materials.

关键词： Quartz hundreds qualitative

Nanozyme catalysis in a crowded environment:The impact of diffusion and surface shielding

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第7期17卷 5795-5800页

作者： Vasily g.Panferov Juewen Liu department of Chemistry Waterloo Institute for NanotechnologyWaterlooOntario N2L 3G1Canada

Nanozymes are widely used in various applications as nanosized catalysts for replacing *** accurate estimation of the catalytic activity of nanozymes in real conditions is *** this article,for the first time,we systematically studied the effect of macromolecular molecules co-existing in the real system on the oxidoreductase(peroxidase,oxidase,and catalase)-mimicking nanozymes made of a gold nanoparticle core and a platinum shell,Prussian Blue,Mn_(2)O_(3) and CoO *** were made with horseradish *** distinguished two main mechanisms of the negative impact of macromolecules on nanozyme catalysis—slowed diffusion and surface shielding of *** the first mechanism is typical for enzymes,the second one is specific only for *** the mechanisms is essential for developing approaches to reduce the unavoidable impact of macromolecules for various analytical and biomedical applications.

关键词： molecular crowding biosensors nanoparticles

The Pichia pastoris enzyme production platform:From combinatorial library screening to bench-top fermentation on residual cyanobacterial biomass

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bioresources and Bioproducts 2024年第1期9卷 43-57页

作者： Korbinian Sinzinger Ulrike Obst Samed güner Manuel döring Magdalena Haslbeck doris Schieder Volker Sieber Chair of Chemistry of Biogenic resources Campus Straubing for Biotechnology and SustainabilityTechnical University of MunichStraubing 94315Germany Catalysis research Center Technical University of MunichGarching 85748Germany SynBiofoundry@TUM Technical University of MunichStraubing 94315Germany School of Chemistry and Molecular Biosciences The University of QueenslandSt.Lucia 4072Australia

The demand for industrial enzymes is continually rising,fueled by the growing need to shift towards more sustainable industrial ***,making efficient enzyme production strains and identifying optimal enzyme expression conditions remains a ***,the production of the enzymes themselves comes with unavoidable impacts,e.g.,the need to utilize secondary ***,we take a more holistic view of bioprocess development and report an integrative approach that allows us to rapidly identify improved enzyme expression and secretion conditions and make use of cyanobacterial waste biomass as feed for supporting Pichia pastoris *** demonstrate these capabilities by producing a phytase secreted by *** that is grown on cyanobacterium hydrolysate and buffered glycerol-complex(BMgY)medium,with genetic expression conditions identified by high-throughput screening of a randomized se-cretion *** our best-performing strain is grown in a fed-batch fermentation on BMgY,we reach over 7000 U/mL in three days.

关键词： Protein secretion Phytase Cyanobacterial biomass Fed-batch fermentation Pichia pastoris

Magnesium oxide(MgO)nanoadsorbents in wastewater treatment:A comprehensive review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1709-1773页

作者： H.C.S.Perera V.gurunanthanan Anoop Singh M.M.M.g.P.g.Mantilaka g.das Sandeep Arya department of Physics Khalifa UniversityAbu Dhabi12788United Arab Emirates Postgraduate Institute of Science University of PeradeniyaPeradeniyaSri Lanka department of Humanities and Sciences Guru Nanak Institutions Technical CampusIbrahimpatnamHyderabad501506India Centre for global Health research Saveetha Medical College and HospitalsSaveetha Institute of Medical and Technical SciencesChennai602105Tamil NaduIndia department of Physics University of JammuJammu and Kashmir180006India

Wastewater contamination by heavy metals and synthetic dyes presents a significant environmental challenge,necessitating effective and sustainable separation *** review article provides a detailed examination of magnesium oxide(MgO)nanoparticles as an innovative nanoadsorbent for wastewater treatment,with a specific focus on heavy metal and dye *** review comprehensively explores various aspects of MgO nanoparticles,including their structural characteristics and synthesis *** article delves into the morphology and crystallographic arrangement of MgO nanoparticles,offering insights into their structural *** the complexity of adsorption processes,the review identifies and analyzes parameters influencing the adsorption efficiency of MgO nanoparticles,such as temperature,pH,contact time,initial concentration,and co-existing *** interplay between these parameters and the adsorption capability of MgO nanoparticles emphasizes the importance of optimizing operational ***,the review assesses various synthesis methods for MgO nanoparticles,including sol-gel,hydrothermal,precipitation,green synthesis,solvothermal,and template-assisted *** discusses the advantages,limitations,and resulting nanoparticle characteristics of each method,enabling readers to grasp the implications of synthesis processes on adsorption *** comprehensive review consolidates current insights into the effectiveness of MgO nanoparticles as a potent nanoadsorbent for removing heavy metals and dyes from wastewater covering a wide spectrum of aspects related to MgO ***,there is a need to investigate the use of MgO in the treatment of actual wastewater or river water,in order to leverage its cost-effectiveness and high efficiency for practical water treatment applications in real-time.

关键词： MgO nanoparticles Nanoadsorbent Wastewater treatment Heavy metals dye separation Adsorption Synthesis methods

Analysis of the discrete contact characteristics based on the greenwood-Williamson model and the localization principle

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第5期12卷 1042-1056页

作者： Anastasiya A.YAKOVENKO Irina g.gOrYACHEVA Ishlinsky Institute for Problems in Mechanics rAS Moscow119526Russia

The contact of a rigid body with nominally flat rough surface and an elastic half-space is *** solve the contact problem,the greenwood-Williamson statistical model and the localization principle are *** developed contact model allows us to investigate the surface approach and the real contact area with taking into account the asperities *** is shown that the mutual influence of asperities changes not only contact characteristics at the macroscale,but also the contact pressure distribution at the *** follows from the results,the inclusion in the contact model of the effect of the mutual influence of asperities is especially significant for studying the real contact area,as well as the contact characteristics at high applied *** results calculated according to the proposed approach are in a good agreement with the experimentally observed effects,i.e.,the real contact area saturation and the additional compliance exhaustion.

关键词： surface roughness elasticity greenwood-Williamson model localization principle asperity interaction

Numerical simulation of three dimensional concrete printing based on a unified fluid and solid mechanics formulation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第4期18卷 491-515页

作者： Janis rEINOLd Koussay dAAdOUCH günther MESCHKE Institute for Structural Mechanics Ruhr University BochumBochum 44801Germany

deformation control constitutes one of the main technological challenges in three dimensional(3d)concrete printing,and it presents a challenge that must be addressed to achieve a precise and reliable construction ***-based information of the expected deformations and stresses is required to optimize the construction process in association with the specific properties of the concrete *** this work,a novel thermodynamically consistent finite strain constitutive model for fresh and early-age 3d-printable concrete is *** model is then used to simulate the 3d concrete printing process to assess layer shapes,deformations,forces acting on substrate layers and prognoses of possible structural collapse during the layer-by-layer *** constitutive formulation is based on a multiplicative split of the deformation gradient into elastic,aging and viscoplastic parts,in combination with a hyperelastic potential and considering evolving material properties to account for structural buildup or *** advantage of this model is the stress-update-scheme,which is similar to that of small strain plasticity and therefore enables an efficient integration with existing material *** constitutive model uses the particle finite element method,which serves as the simulation framework,allowing for modeling of the evolving free surfaces during the extrusion *** analyses of three printed layers are used to create deformation plots,which can then be used to control the deformations during 3d concrete *** study offers further investigations,on the structural level,focusing on the potential structural collapse of a 3d printed concrete *** capability of the proposed model to simulate 3d concrete printing processes across the scales—from a few printed layers to the scale of the whole printed structure—in a unified fashion with one constitutive formulation,is demonstrated.

关键词： particle finite element method 3d concrete printing multiplicative split additive manufacturing elastoviscoplasticity

Solid-liquid extraction for yttrium recovery using porous polymeric resin(XAd-7) functionalized with d_(2)EHPA

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第9期42卷 1764-1773,I0005页

作者： P.A.Martínez-Montoya r.g.Sanchez-Alvarado d.Y.Medina-Velazquez M.L.Carrera-Jota P.garnica-Chávez A.de J.Morales-ramirez Higher School of Chemical Engineering and Extractive Industries ESIQIEIPNDepartment of Metallurgical EngineeringUPALM S/NCol.LindavistaGustavo A.Madero Cd.de MéxicoC.P07738Mexico Metropolitan Autonomous University Department of MaterialsBasic Sciences and EngineeringAv.San Pablo No.180Col.Reynosa TamaulipasCd.de MéxicoC.P02200Mexico Center for research and Technological Innovation CIITECIPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P02250CDMXMexico

The recovery of yttrium is proposed by applying a solid-liquid extraction process using di-2-ethyl hexylphosphoric acid(d2EHPA) as extracting *** extracting agents were supported on a macro porous polymeric resin XAd-7(solid phase).Yttrium ions extraction and discharge tests were performed,firstly from a synthetic aqueous solution of 100 mg/L Y(liquid phase) at 25℃ with *** effects of pH of aqueous solutions bearing yttrium,volume fraction of extracting agents and the solid/liquid(S/L)ratio on the yttrium recovery were *** most favorable conditions for yttrium ions extraction are;20 vol% d_(2)EHPA functionalized resin,pH=1.5 and an S/L ratio of 10 mg/mL The discharge of yttrium ions was done under the same conditions of extraction stage,using a 2 mol/L [H_(2)SO_(4)] as stripping *** to 80% yttrium is extracted,while 75% yttrium is recovered in the striping *** all experiments,the reaction equilibrium is reached after 20 min,and the kinetics for the extraction stage was determined as a second-order ***,experiments were carried out to discharge the yttriumloaded resins,and it has been determined that the best pH value to strip the Y ions is *** tests of extraction and discharge for yttrium ions show that the functionalized resin can work at least five cycles without decreasing its ***,the proposed process was tested in a real solution with Y ions fro m a waste fluorescent la mp powder leached in H_(2)SO_(4),demonstrating the ability to effectively recover yttrium,separating it from various metals from the studied residue.

关键词： Yttrium recovery rare earth solid-liquid extraction XAd-7 resin Fluorescent lamps recycling Solid-liquid kinetics extraction

Unveiling the early universe:Axion-like particles and their role in primordial structure formation

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第11期67卷 178-179页

作者： Sergey g.rubin National research Nuclear University MEPhI(Moscow Engineering Physics Institute) Moscow 115409Russia

The groundbreaking discovery of gravitational waves(gWs)by the LIgO-VIrgO-KAgrO collaboration has revolutionized our understanding of the universe and opened up a new way of observing cosmic events. Unlike light waves... 详细信息

关键词： universe gravitational cosmic

Summary of a Life in Observational Ultraviolet/Optical Astronomy

在线全文

学校读者我要写书评

暂无评论

research in Astronomy and Astrophysics 2024年第1期24卷 1-43页

作者： donald g.York department of Astronomy and Astrophysics The University of Chicago5801 South Ellis Ave.Chicago 60637ILUSA

I reminisce on my early life in Section 1;on my education in Sections 2 and 3;on the years at Princeton as a research astronomer in Section 4;on the years on the faculty at Chicago in Section 5;on research on diffuse Interstellar Bands(dIBs) in Section 6;on construction of the 3.5 m telescope at Apache Point Observatory(APO)in Section 7;on work on the Sloan digital Sky Survey(SdSS) in Section 8;on work in public education in Chicago in Section 9;and on my travels in Section 10. My main science research is of an observational nature,concerning galactic and intergalactic interstellar gas. Highlights for me included my work on the orbiting telescope Copernicus, including the discovery of interstellar deuterium;early observations of absorption associated with fivetimes ionized oxygen;and discoveries concerning the phases of gas in the local interstellar medium, based on previously unobservable interstellar UV spectral lines. With other instruments and collaborations, I extended interstellar UV studies to the intergalactic cool gas using quasi-stellar object QSO absorption lines redshifted to the optical part of the spectrum;provided a better definition of the emission and morphological character of the source of absorption lines in QSO spectra;and pursued the identification of the unidentified dIBs. For several of these topics, extensive collaborations with many scientists were essential over many years. The conclusions developed slowly, as I moved from being a graduate student at Chicago, to a research scientist position at Princeton and then to a faculty position at Chicago. At each stage of life, I was exposed to new technologies adaptable to my science and to subsequent projects. From high school days, I encountered several management opportunities which were formative. I have been extremely fortunate both in scientific mentors I had and in experimental opportunities I encountered.

关键词： Interstellar Medium(ISM) Nebulae (galaxies:)quasars:absorption lines ultraviolet:stars