检索结果-南通市图书馆

Journal of Magnesium and Alloys 2024年第3期12卷 841-872页

作者： Jong Un Lee Hyun Ji Kim Sang-cheol Jin Ye Jin Kim Young Min Kim Bong Sun You Jun ho Bae Sung Hyuk park Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Metallurgical Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Missile Research Institute Agency for Defense DevelopmentDaejeon 34060Republic of Korea

This review article provides overall understanding of stainless,environment-friendly,and nonflammable Mg alloys(SEN alloys)recently developed at the Korea Institute of Materials *** alloys are produced by adding small amounts of Ca and Y(eachhose of commercial AZ91 alloys.(5)Simultaneous introduction of Ca and Y suppresses the formation of Mg17Al12 discontinuous precipitates during aging,leading to the enhanced elongation of aged SEN alloys.(6)Adding mischmetal into the SEN9 alloy leads to a six-fold enhancement in ***,the studies conducted on SEN alloys demonstrate their excellent ignition and corrosion resistances and mechanical properties,which broaden the industrial applications of Mg alloys by addressing their inherent weaknesses.

关键词： SEN magnesium alloy Corrosion resistance Ignition resistance Mechanical properties Extrudability.

Construction of a High‑Performance Composite Solid Electrolyte Through In‑Situ Polymerization within a Self‑Supported Porous Garnet Framework

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第5期16卷 56-70页

作者： An‑Giang Nguyen Min‑ho Lee Jaekook Kim Chan‑Jin park Department of Materials Science and Engineering Chonnam National University77 Yongbong‑roBuk‑guGwangju 61186South Korea

Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).however,concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for *** overcome these challenges,we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZT)to produce the *** synergy of the continuous conductive LLZT network,well-organized polymer,and their interface can enhance the ionic conductivity of the CSE at room ***,the in-situ polymerization process can also con-struct the integration and compatibility of the solid electrolyte–solid electrode *** synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm^(-1),a significant lithium transference number of 0.627,and exhibited electrochemical stability up to 5.06 V ***/Li+at 30℃.Moreover,the Li|CSE|LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cell delivered a discharge capacity of 105.1 mAh g^(-1) after 400 cycles at 0.5 C and 30℃,corresponding to a capacity retention of 61%.This methodology could be extended to a variety of ceramic,polymer electrolytes,or battery systems,thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.

关键词： Scalable tape-casting method Self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12) Composite solid electrolyte LiF-and B-rich interphase layers

Extract of buckwheat sprouts scavenges oxidation and inhibits pro-inflammatory mediators in lipopolysaccharide-stimulated macrophages (RAW264.7)

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Medicine 2013年第4期11卷 246-252页

作者： Rajendra Karki cheol-ho park Dong-Wook Kim Department of Oriental Medicine Resources Mokpo National University Division of Pharmacology and Toxicology School of Pharmacy University of Missouri-Kansas City Department of Bio-Health Technology Kangwon National University

OBJECTIVE： Buckwheat has been considered as a potential source of nutraceutical components on the world market of probiotic foodstuffs. The purpose of this study was to evaluate the effects of tartary buckwheat （Fagopyrum tataricum） sprouts on oxidation and pro-inflammatory mediators. METhoDS： The anti-oxidant effects of buckwheat extract （BWE） and rutin were evaluated by using 1,1-diphenyl-2-picrylhydrazyl （DPPH）-and nitric oxide （NO）-scavenging activities, serum peroxidation and chelating assays. Lipopolysaccharide （LPS）-stimulated RAW264.7 cells were used to evaluate anti-inflammatory activities of buckwheat and rutin. NO production in LPS- stimulated RAW264.7 cells was determined by using Griess reagent. The expressions of inducible nitric oxide synthase （iNOS）, cyclooxygenase-2 （COX-2）, nuclear factor-kappa B （NF-κB） p65 subunit in cytosolic and nuclear portions were determined by Western blot analysis. Also, the production of inflammatory cytokines interleukin-6 （IL-6） and tumor necrosis factor-α （TNF-α） was determined by enzyme-linked immunosorbent assay. RESULTS： Inhibitory concentration 50 values for DPPH- and NO-scavenging activities of BWE were 24.97 and 72.54 μg/mL respectively. BWE inhibited serum oxidation and possessed chelating activity. Furthermore, BWE inhibited IL-6 and TNF-a production in LPS-stimulated RAW264.7 cells. Also, BWE inhibited iNOS and COX-2 expression and NF-KB p65 translocation. CONCLUSION： Buckwheat sprouts possessed strong antioxidant activity and inhibited production of pro-inflammatory mediators in the applied model systems. Thus, buckwheat can be suggested to be beneficial in inflammatory diseases by inhibiting the free radicals and inflammatory mediators.

关键词： Fagopyrum plant extracts oxidation nitric oxide synthase type II cyclooxygenase 2

Validity of fatty liver prediction scores for diagnosis of fatty liver by Fibroscan

在线全文

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第4期23卷 353-360页

作者： Seogsong Jeong Sun Jae park Seong Kyun Na Sang Min park Byung-cheol Song Yun Hwan Oh Department of Biomedical Sciences Seoul National University Graduate SchoolSeoul 03080Korea Department of Biomedical Informatics CHA University School of MedicineCHA UniversitySeongnam 13488Korea Department of Internal Medicine Inje University College of MedicineSeoul 50834Korea Department of Family Medicine Seoul National University HospitalSeoul National University College of MedicineSeoul 03080Korea Department of Internal Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Chung-Ang University Gwangmyeong HospitalChung-Ang University College of MedicineGwangmyeong 14353Korea

Background:The Korea National Health and Nutrition Examination Survey nonalcoholic fatty liver disease(K-NAFLD)score was recently developed with the intent to operationally define nonalcoholic fatty liver disease(NAFLD).however,there remained an external validation that confirmed its diagnostic performance,especially in patients with alcohol consumption or hepatitis virus ***:Diagnostic accuracy of the K-NAFLD score was evaluated in a hospital-based cohort consisting of 1388 participants who received Fibroscan®.Multivariate-adjusted logistic regression models and the contrast estimation of receiver operating characteristic curves were used for validation of the K-NAFLD score,fatty liver index(FLI),and hepatic steatosis index(HSI).Results:K-NAFLD-moderate[adjusted odds ratio(aOR)=2.53,95%confidence interval(CI):1.13-5.65]and K-NAFLD-high(aOR=4.14,95%CI:1.69-10.13)groups showed higher risks of fatty liver compared to the K-NAFLD-low group after adjustments for demographic and clinical characteristics,and FLI-moderate and FLI-high groups revealed aORs of 2.05(95%CI:1.22-3.43)and 1.51(95%CI:0.78-2.90),*** addition,the HSI was less predictive for Fibroscan®-defined fatty *** K-NAFLD and FLI also demonstrated high accuracy in the prediction of fatty liver in patients with alcohol consumption and chronic hepatitis virus infection,and the adjusted area under curve values were comparable between K-NAFLD and ***:Externally validation of the K-NAFLD and FLI showed that these scores may be a useful,noninvasive,and non-imaging modality for the identification of fatty *** addition,these scores also predicted fatty liver in patients with alcohol consumption and chronic hepatitis virus infection.

关键词： Nonalcoholic fatty liver disease Fatty liver index Hepatic steatosis index

Data driven computational design of stable oxygen evolution catalysts by DFT and machine learning:Promising electrocatalysts

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 645-655页

作者： Hwanyeol park Yunseok Kim Seulwon Choi ho Jun Kim Department of Display Materials Engineering Soonchunhyang UniversityAsanChung-nam 31538Republic of Korea Department of Electronic Materials Devicesand Equipment EngineeringSoonchunhyang Uni-versityAsanChungnam 31538Republic of Korea Department of Mechanical Engineering Hanyang University ERICA Campus55 Hanyangdaehak-roSangnok-guAnsanGyeonggi-do 15588Republic of Korea

The revolutionary development of machine learning(ML),data science,and analytics,coupled with its application in material science,stands as a significant milestone of the scientific community over the last *** active,stable,and cost-efficient catalysts is crucial for oxygen evolution reaction owing to the significance in a range of electrochemical energy co nversion *** this work,we have demonstrated an efficient approach of high-throughput screening to find stable transition metal oxides under acid condition for high-performance oxygen evolution reaction(OER)catalysts through density functional theory(DFT)calculation and a machine learning algorithm.A methodology utilizing both the Materials Project database and DFT calculations was introduced to assess the acid stability under specific reaction *** upon this,OER catalytic activity of acid-stable materials was examined,highlighting potential OER catalysts that meet the required *** identified IrO_(2),Fe(SbO_(3))_(2),Co(SbO_(3))_(2),Ni(SbO_(3))_(2),FeSbO_(4),Fe(SbO_(3))4,MoWO_(6),TiSnO_(4),CoSbO_(4),and Ti(WO_(4))_(2)as promising catalysts,several of which have already been experimentally discovered for their robust OER performance,while others are novel for experimental exploration,thereby broadening the chemical scope for efficient OER *** of the bond length of TM-O and the first ionization energy were used to unveil the OER activity *** the calculated results,guidance has been derived to effectively execute advanced high-throughput screenings for the discovery of catalysts with favorable ***,the intrinsic correlation between catalytic performance and various atomic and structural factors was elucidated using the ML *** these approaches,we not only streamline the choice of the promising electrocatalysts but also offer insights for the design of varied catalyst models and the discovery of superior c

关键词： Transition metal oxides Oxygen evolution reaction High-throughput screening First-principles calculation Machine learning

A review of understanding electrocatalytic reactions in energy conversion and energy storage systems via scanning electrochemical microscopy

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 155-177页

作者： Jihye park Jong Hwan Lim Jin-Hyuk Kang Jiheon Lim ho Won Jang hosun Shin Sun Hwa park Interdisciplinary Materials Measurement Institute Korea Research Institute of Standards and ScienceDaejeon 34113Republic of Korea Department of Material Science and Engineering Seoul National UniversitySeoul 08826Republic of Korea Department of Applied Measurement Science University of Science and TechnologyDaejeon 34113Republic of Korea

To address climate change and promote environmental sustainability,electrochemical energy conversion and storage systems emerge as promising alternative to fossil fuels,catering to the escalating demand for *** optimal energy efficiency and cost competitiveness in these systems requires the strategic design of electrocatalysts,coupled with a thorough comprehension of the underlying mechanisms and degradation behavior occurring during the electrocatalysis *** electrochemical microscopy(SECM),an analytical technique for studying surface electrochemically,stands out as a powerful tool offering electrochemical *** possesses remarkable spatiotemporal resolution,enabling the visualization of the localized electrochemical activity and surface *** review compiles crucial research findings and recent breakthroughs in electrocatalytic processes utilizing the SECM methodology,specifically focusing on applications in electrolysis,fuel cells,and metal–oxygen batteries within the realm of energy conversion and storage *** with an overview of each energy system,the review introduces the fundamental principles of SECM,and aiming to provide new perspectives and broadening the scope of applied research by describing the major research categories within SECM.

关键词： Scanning electrochemical microscopy Electrocatalyst Electrocatalysis Water splitting Fuel cell Metal-oxygen battery

Effect of Isothermal Annealing on Nano Ti-Carbides Precipitation

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2011年第S1期18卷 287-289页

作者： cheol-ho park Woo-jin Kim Nam-hyun Kang Hyung-hyup Do Kyung-Mox Cho Department of Materials Science and Engineering Pusan National UniversityBusan 609-735Korea Technical Research Laboratories Hyundai steelsDangjinChungnam 343-711Korea

Transmission electron microscopy was used to investigate the effect of isothermal holding temperature and time on the nano Ti-precipitates.A holding temperature was varied systematically from 400℃ to 1200℃.The isothermal holding was continued for 30s,300s and 900s,*** carbides of (Ti,Nb)C were precipitated significantly at 900℃.The size of carbides was approximately 10nm at 30s holding and increased to 20～30nm at 900s *** holding at 1000℃ showed the increased amount of carbides larger than *** 800℃,nano (Ti,Nb)C was not observed at 30s and it was examined at *** size of nano (Ti,Nb)C was smaller than that of 900℃.As the isothermal temperature decreased to 700 ℃,the nano (Ti,Nb)C was only seen at 900s holding and the size of carbides was smaller than *** (Ti,Nb)C was disappeared at isothermal holding below 600℃.The kinetics of nano (Ti,Nb)C precipitation were studied as a function of isothermal holding temperature and time,respectively,using the precipitate growth equations.

关键词： Ti carbide hot rolled steel hole expansion ratio isothermal holding nano precipitates

Trifunctional robust electrocatalysts based on 3D Fe/N-doped carbon nanocubes encapsulating Co4N nanoparticles for efficient battery-powered water electrolyzers

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第6期6卷 124-139页

作者： Hyung Wook Choi hongdae Lee Jun Lu Seok Bin Kwon Dong In Jeong Beum Jin park Jiwon Kim Bong Kyun Kang Gun Jang Dae ho Yoon ho Seok park SKKU Advanced Institute of Nano Technology(SAINT) Sungkyunkwan UniversitySuwon-siGyeonggi-doRepublic of Korea School of Chemical Engineering Sungkyunkwan UniversitySuwon-siGyeonggi-doRepublic of Korea School of Advanced Materials Science and Engineering Sungkyunkwan UniversitySuwon-siGyeonggi-doRepublic of Korea Department of Electronic Materials Devicesand Equipment EngineeringSoonchunhyang UniversityAsan CityChungnamRepublic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwon-siGyeonggi-doRepublic of Korea Department of Health Sciences and Technology Samsung Advanced Institute for Health Sciences and Technology(SAIHST)Sungkyunkwan UniversitySuwonRepublic of Korea

Herein,we have designed a highly active and robust trifunctional electrocatalyst derived from Prussian blue analogs,where Co_(4)N nanoparticles are encapsulated by Fe embedded in N-doped carbon nanocubes to synthesize hierarchically structured Co_(4)N@Fe/N-C for rechargeable zinc-air batteries and overall water-splitting *** confirmed by theoretical and experimental results,the high intrinsic oxygen reduction reaction,oxygen evolution reaction,and hydrogen evolution reaction activities of Co_(4)N@Fe/N-C were attributed to the formation of the heterointerface and the modulated local electronic ***,Co_(4)N@Fe/N-C induced improvement in these trifunctional electrocatalytic activities owing to the hierarchical hollow nanocube structure,uniform distribution of Co_(4)N,and conductive encapsulation by Fe/***,the rechargeable zinc-air battery with Co_(4)N@Fe/N-C delivers a high specific capacity of 789.9 mAh g-1 and stable voltage profiles over 500 ***,the overall water electrolyzer with Co_(4)N@Fe/N-C achieved better durability and rate performance than that with the Pt/C and IrO2 catalysts,delivering a high Faradaic efficiency of 96.4%.Along with the great potential of the integrated water electrolyzer powered by a zinc-air battery for practical applications,therefore,the mechanistic understanding and active site identification provide valuable insights into the rational design of advanced multifunctional electrocatalysts for energy storage and conversion.

关键词： battery-powered electrolyzers hierarchical structure Prussian blue analog trifunctional electrocatalyst zinc-air battery

Nanoparticle Exsolution on Perovskite Oxides:Insights into Mechanism,Characteristics and Novel Strategies

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第2期16卷 312-346页

作者： Yo Han Kim Hyeongwon Jeong Bo‑Ram Won Hyejin Jeon Chan‑ho park Dayoung park Yeeun Kim Somi Lee Jae‑ha Myung Department of Materials Science and Engineering Incheon National UniversityIncheon 22012Republic of Korea

Supported nanoparticles have attracted considerable attention as a promising catalyst for achieving unique properties in numerous applications,including fuel cells,chemical conversion,and *** demonstrate high activity by expanding the number of active sites,but they also intensify deactivation issues,such as agglomeration and poisoning,*** for bottomup synthesis of supported nanoparticles has emerged as a breakthrough technique to overcome limitations associated with conventional *** are uniformly exsolved from perovskite oxide supports and socketed into the oxide support by a one-step reduction *** uniformity and stability,resulting from the socketed structure,play a crucial role in the development of novel ***,tremendous research efforts have been dedicated to further controlling exsolution *** effectively address exsolution at a more precise level,understanding the underlying mechanism is *** review presents a comprehensive overview of the exsolution mechanism,with a focus on its driving force,processes,properties,and synergetic strategies,as well as new pathways for optimizing nanocatalysts in diverse applications.

关键词： Supported nanoparticle Exsolution In situ growth Mechanism Perovskite oxide Catalyst

Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 186-196页

作者： Sujeong Byun Jinyeong Yu Seho Cheon Seong ho Lee Sung Hyuk park Taekyung Lee School of Mechanical Engineering Pusan National UniversityBusan 46241South Korea School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566South Korea

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading *** characteristic results in a diverse range of flow curves that vary with a deformation *** study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data *** developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)*** proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset *** model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading *** GAN-aided GRU results were superior to those of previous ML models and constitutive *** superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for *** a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

关键词： Plastic anisotropy Compression Annealing Machine learning Data augmentation