检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2018年第9期25卷 1090-1103页

作者： Tapan Sarkar ajit kumar pramanick Tapan kumar Pal Akshay kumar pramanick Welding Technology Centre Jadavpur University Department of Forge Technology NIFFT

Coated Electrodes with small amounts of nickel were developed for welding ductile iron(DI) and conversion of the same into austempered ductile iron(ADI) after austempering. Among six electrodes, Trials 3 and 4 were selected for establishing crack-free weld deposits via preheating and post-weld heat treatment. Austenitization was performed at 900°C for 2 h and austempering at 300 or 350°C for three different holding times to observe the results of austempering with respect to the microstructure, hardness, and austempering kinetics of the samples. The microstructures of the weld deposits showed needle-like bainitic ferrite with small amounts of retained austenite when treated at 300°C and feathery bainitic ferrite with large amounts of retainedaustenite when treated at 350°C. The electrode labeled with Trial 3 revealed greater austenite contents than that labeled with Trial 4 when treated with a 2 h holding time regardless of the austempering temperature applied. The transformation rate of the bainitic ferrite of Trial 3 was relatively higher than that of Trial 4 and showed a lower rate constant, leading to a higher diffusion rate of carbon in austenite.

关键词： electrode development microstructure XRD analysis transformation kinetic microhardness

Mitigation on self-discharge behaviors via morphological control of hierarchical Ni-sulfides/Ni-oxides electrodes for long-life-supercapacitors

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第18期113卷 217-228页

作者： Dhananjay Mishra Niraj kumar ajit kumar SeungGi Seo SungHun Jin Department of Electronic Engineering Incheon National UniversityIncheon 406-772 and also with Convergence Research Center for Insect VectorsIncheon National UniversityRepublic of Korea

To cope up with the sustainable energy storage goals for supercapacitors(SCs),the self-discharge in SC electrodes is a significant hurdle,and thereby,nickel sulfide(NS)with high conductivity is adopted as a test vehicle for understanding the morphological evolution effects for long-life ***,honeycomb-like NS is hierarchically formed over hydrothermally grown nickel oxide(NO)via successive ionic layer adsorption reaction(SILAR)*** heterostructure shows a fivefold improvement in specific capacitance from 348 F g^(−1) to 2077 F g^(−1)at 1 mV s^(−1) over bare ***,the remarkable upliftment of capacitance retention is achieved from 60.7%to 92.3%even after 3000 cycles via morphological control of NS/NO hetero-structure with the help of highly conductive *** importantly,the self-discharge behaviors and synergistic role of leakage current associated with morphological evolution via NS overcoating are studied in *** particular,the self-discharge mitigation from 45%(NO)to 35%(NS20/NO)due to the NS/NO heterostructure and the behind mechanism are ascribed to the activated-controlled Faradaic reaction coupled with a charge *** study emphasizes the potential importance of composite heterostructure by tuning the electrical conductivity and morphological adjustment NO via consecutive overcoating of NS through SILAR as a novel *** enhances charge storage,redox kinetics,and the mitigation of self-discharge properties of the active electrode *** practical validation on sustainable energy storage,NS20/NO supercapacitors illuminate the LED for 35%longer than NO after one-time charging,potentially beneficial for the next generation SCs.

关键词： Morphological evolution Self-discharge SILAR overcoating Supercapacitors Heterostructure

World Literature:An Indian Way of Thinking

在线全文

学校读者我要写书评

暂无评论

Journal of Foreign Languages and Cultures 2023年第2期7卷 76-89页

作者： Mrinmoy pramanick University of Calcutta

The idea of the world is a dynamic phenomenon,and the development of world literature is tied to both literary and extra-literary *** literary centers can be found in many locations spanning both time and *** concept of the world,or Visva(Sanskrit),is considerably older even if world literature has been a discursive framework that has affected the literary structures of many languages around the world since the 19th century."Vasudhaiba Kutumbakam,"or the universal neighborhood,is a term from ancient Indian literature that attests to the age of the concept of Vasudha,or the *** a result of numerous trade routes,cultural interactions,the expansion of ancient and medieval kingdoms,and the transit of literary writings,cosmopolitan literary spaces were created in various parts of t8he ***,the absence of modern cartography and the sovereign state system enabled constant changes in the borders of the empires,resulting in spaces with many *** has connections to several Asian nations dating back to ancient times,as well as to Europe since the medieval *** diverse traditions of human thought from various parts of the world are carried in Indian *** literary contacts and the ongoing formation of new literary legacies were witnessed in the East,Middle East,South East,and South Asia of the *** Sufi and Bhakti traditions,the reception of Indian epics as oral,written,and performative texts in South-East Asia,and the role of the royal courts as multilingual literary spaces continue to broaden the intellectual traditions of Bharat(India).Thus,the pre-modern development of world literature seemed intriguing and a subject worth exploring for literary *** essay contends that ancient and medieval India and Bengal,particularly their languages,continually bargained to expand their intellectual frontiers.

关键词： Visva-Sahitya world literature Tagore Suniti kumar Chatterji Indian literature Bengali literature universal humanism

Effect of ultrasonic assisted sintering on mechanical properties and degradation behaviour of Mg15Nb3Zn1Ca biomaterial

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2021年第6期9卷 1989-2008页

作者： ajit kumar Pulak M Pandey Department of Mechanical Engineering Indian Institute of TechnologyDelhiNew Delhi 110016India

The present work investigates the effect of ultrasonic power(%)and the time of ultrasonic vibration on the sintered density and ultimate compressive strength(UCS)of Mg15Nb3Zn1Ca fabricated using ultrasonic assisted conventional sintering(UACS).The customized UACS setup was designed and manufactured to conduct the experimentations.A customized ultrasonic stepped horn assembly was used for providing vibrations to the sample during ***,to evaluate the efficacy of ultrasonic vibration parameters,the developed setup was used to sinter Mg15Nb3Zn1Ca composite *** study unveiled an increased sintered density and UCS of the fabricated sample by the increase in ultrasonic power(%).Moreover,a decrease in sintered density and UCS was observed with an increase in the time of ultrasonic vibration beyond a certain *** sintered with the assistance of ultrasonic vibration at 100%ultrasonic power,and 20 min of ultrasonic vibration resulted in a sintered density of 1.928±0.062 g·cm^(-3)and UCS of 234.9±12.3 *** obtained mechanical properties of the fabricated sample were comparable to the properties of cortical *** surface morphology and elemental compositions of samples fabricated using UACS declared a fair dispersion of reinforcement in the matrix containing merely the source *** results of corrosion test have showed that the assistance of ultrasonic vibration suppressed the degradation behaviour of the sintered sample after performing electrochemical study of samples using 3-electorde cell ***15Nb3Zn1Ca fabricated using UACS showed a 50.18%and 9.08%of reduction in corrosion rate over conventionally sintered pure Mg and Mg15Nb3Zn1Ca *** addition,electrochemical impedance spectroscopy(EIS)results indicated an enhanced corrosion resistance of the Mg15Nb3Zn1Ca composite material when fabricated at 100%of ultrasonic power with 20 min of vibration *** from that,electrochemical equivalent circuits also result

关键词： Ultrasonic assisted sintering Magnesium Corrosion EIS Mechanical properties

Development of Mg based biomaterial with improved mechanical and degradation properties using powder metallurgy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2020年第3期8卷 883-898页

作者： ajit kumar Pulak M.Pandey Department of Mechanical Engineering Indian Institute of TechnologyDelhi110016India

In the present work,biocompatible materials such as niobium(Nb),zinc(Zn)and calcium(Ca)have been blended with magnesium(Mg)to develop a novel biomaterial(BM)with improved mechanical and corrosion resistant *** metallurgy(PM)technique was used to fabricate Mg based *** powder of all aforementioned materials were mixed homogenously in specific quantities to create a uniform composite *** order to analyse the influence of process parameters on the mechanical properties of the fabricated part,experiments were performed considering central composite design(CCD).The effect of powder metallurgical parameters namely percentage Nb,compaction pressure,heating rate,sintering temperature and soaking time on the ultimate compressive strength(UCS)and sintered density was studied in the present *** was found that the UCS and sintered density increased with increase in compaction pressure,heating rate and sintering *** results also revealed that the increase in soaking time and percentage Nb,increased sintered density and UCS to a certain *** increase in these two parameters,sintered density and UCS *** electron microscopy(SEM)images of the fabricated samples showed reduction in porosity with the increase in heating ***,X-ray diffraction(XRD)results revealed that no other phase or impurities were found during sintering of Mg based *** optimum process parameters were obtained to develop Mg based BM for maximum UCS and sintered ***,the Mg based BM samples fabricated at optimum process parameters were used for corrosion testing in simulated body fluid(SBF)solution at a temperature of 37±0.5℃.The Mg based BM yielded improved mechanical properties with reduced corrosion rates as compared to pure Mg.

关键词： Biomaterials Powder metallurgy Magnesium Corrosion Metal matrix composite

Evaluating active leprosy case identifcation methods in six districts of Nepal

在线全文

学校读者我要写书评

暂无评论

Infectious Diseases of Poverty 2023年第6期12卷 105-106页

作者： Ram kumar Mahato Uttam Ghimire Madhav Lamsal Bijay Bajracharya Mukesh Poudel Prashnna Napit Krishna Lama Gokarna Dahal David T.S.Hayman ajit kumar Karna Basu Dev Pandey Chuman Lal Das Krishna Prasad Paudel Epidemiology and Disease Control Division Department of Health Services Ministry of Health and Population Kathmandu Nepal Epidemiology and Disease Control Division-Malaria Program Management Unit- SCI-GF Kathmandu Nepal Leprosy Control & Disability Management Section EPidemiology and Disease Control Division DoHS Kathmandu Nepal Lalgadh Leprosy Hospital & Service Center Nepal Leprosy Trust Lalgadh Nepal Molecular Epidemiology and Public Health Laboratory Infectious Disease Research Centre Hopkirk Research Institute Massey University Palmerston North New Zealand Center for Health and Disease Studies-Nepal Kathmandu Nepal DEJIMA Infectious Disease Research Alliance Nagasaki University Nagasaki Japan

Background Nepal has achieved and sustained the elimination of leprosy as a public health problem since 2009,but 17 districts and 3 provinces with 41%(10,907,128)of Nepal’s population have yet to eliminate the *** cases and grade-2 disabilities(G2D)indicate recent transmission and late diagnosis,respectively,which necessitate active and early case *** operational research was performed to identify approaches best suited for early case detection,determine community-based leprosy epidemiology,and identify hidden leprosy cases early and respond with prompt *** Active case detection was undertaken in two Nepali provinces with the greatest burden of leprosy,Madhesh Province(40%national cases)and Lumbini Province(18%)and at-risk prison populations in Madhesh,Lumbini and Bagmati *** detection was performed by(1)house-to-house visits among vulnerable populations(n=26,469);(2)contact examination and tracing(n=7608);in Madhesh and Lumbini Provinces and,(3)screening prison populations(n=4428)in Madhesh,Lumbini and Bagmati Provinces of *** case direct medical and nonmedical costs for each approach were *** New case detection rates were highest for contact tracing(250),followed by house-to-house visits(102)and prison screening(45)per 100,000 population ***,the cost per case identifed was cheapest for house-to-house visits[Nepalese rupee(NPR)76,500/case],followed by contact tracing(NPR 90,286/case)and prison screening(NPR 298,300/case).House-to-house and contact tracing case paucibacillary/multibacillary(PB:MB)ratios were 59:41 and 68:32;female/male ratios 63:37 and 57:43;pediatric cases 11%in both approaches;and grade-2 disabilities(G2D)11%and 5%,*** leprosy was not signifcantly diferent among household and neighbor contacts[odds ratios(OR)=1.4,95%confdence interval(CI):0.24-5.85]and for contacts of MB versus PB cases(OR=0.7,95%CI 0.26-2.0).Attack rates were not signifcantly d

关键词： Leprosy Early case detection Community-based epidemiology Hidden case New case detection rate Attack rate Cost per case identifed Nepal

Chlorination roasting-coupled water leaching process for potash recovery from waste mica scrap using dry marble sludge powder and sodium chloride

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2020年第9期27卷 1203-1215页

作者： Sandeep kumar Jena Jogeshwar Sahu Geetikamayee Padhy Swagatika Mohanty ajit Dash Mineral Processing and Central Characterization Department Council of Scientific and Industrial Research(CSIR)-Institute of Minerals and Materials Technology(IMMT)BhubaneswarOdisha 751013India

The present paper reports the effective utilization of marble sludge powder(MSP)for the recovery of potash values from waste mica scrap using chlorination roasting-water leaching *** studies indicated the presence of dolomite as the major mineral phase in MSP,whereas muscovite and quartz were observed in the mica *** acid leaching studies suggest a maximum of 22%potash recovery under conditions:4 M H2SO4 acid,particle size of^100μm,stirring speed of 600 r/min,leaching temperature of 75℃,and leaching time of 90 *** chlorination roasting-water leaching process was adopted to achieve the lowest level of 80%-90%potash *** optimum conditions for the recovery of^93%potash from mica(~8.6wt%K2O)requires 900℃ roasting temperature,30 min roasting time,and 1:1:0.75 mass ratio of mica:MSP:*** roasting temperature and amount of NaCl are found to be the most important factors for the recovery *** reaction mechanism suggests the formation of different mineral phases,including sylvite(KCl),wollastonite,kyanite,and enstatite,during roasting,which were confirmed by X-ray diffraction(XRD)analyses and scanning electron microscopy(SEM)*** MSP-blended NaCl additive is more effective for potash recovery compared with the other reported commercial roasting additives.

关键词： potash recovery mica scrap marble sludge powder chlorination roasting water leaching

Abundance of Carbonic Fluid Inclusions in Hira-Buddini Gold Deposit, Hutti-Maski Greenstone Belt, India: Inferences from Petrography and Volume Ratio Estimation of Fluid Components

在线全文

学校读者我要写书评

暂无评论

Journal of Earth Science 2020年第3期31卷 492-499页

作者： Rajagopal Krishnamurthi ajit kumar Sahoo Rajesh Sharma Prabhakar Sangurmath Department of Earth Sciences Indian Institute of TechnologyRoorkeeRoorkee-241661India Department of Geology Banaras Hindu UniversityVaranasi-221005India Wadia Institute of Himalayan Geology Dehradun-24S001India Hutti Gold Mines Company Limited Hutti-584115India

Low saline aqueous carbonic fluids are considered to be the ore forming solutions for orogenic lode gold *** separation/fluid immiscibility of the ore fluid is quite common and is one of the major reasons for deposition of gold in these *** carbonic fluid inclusions have been observed in quartz grains of Hira-Buddnini Gold *** estimation indicates that more volume of H2O compared to CO2 is likely to be trapped in inclusions at different P-T *** loss of H2O from fluid inclusions during ductile deformation of quartz grains have been attributed as the suitable reason for abundance of carbonic fluid inclusions.

关键词： orogenic lode gold deposit carbonic fluid inclusions Redlich-Kwong Equation fluid immiscibility Hira-Buddini Gold Deposit

Trapezoidal fuzzy model to optimize transportation problem

在线全文

学校读者我要写书评

暂无评论

International Journal of Modeling, Simulation, and Scientific Computing 2016年第3期7卷 285-292页

作者： Nirbhay Mathur Pankaj kumar Srivastava ajit Paul Sam Higginbottom Institute of Agriculture Technology and Sciences Allahabad Jaypee Institute of Information Technology Noida

The main aim of this paper is to develop an approach based on trapezoidal fuzzy numbers to optimize transportation problem in fuzzy *** present algorithm has representation of availability,demand and transportation cost as trapezoidal fuzzy *** algorithm is found quicker in terms of runtime as comparison to fuzzy VAM discussed in[Kaur A.,kumar A.,A new method for solving fuzzy transportation problem using ranking function,***.35:5652–5661,2011;Ismail Mohideen S.,Senthil kumar P.,A comparative study on transportation problem in fuzzy environment,***.2:151–158,2010].On the other hand this technique gives much better results than some classical methods like north-west corner and least cost *** benefit of this algorithm is that for certain transportation problems it directly gives optimal *** is one of the simplest methods to apply and *** usefulness of the new method over other existing methods is demonstrated with two numerical examples.

关键词： Fuzzy transportation problems trapezoidal fuzzy numbers minimum demand-supply optimal solution

Reversible and controllable threshold voltage modulation for n-channel MoS2 and p-channel MoTe_(2 )field-effect transistors via multiple counter doping with ODTS/poly-L-lysine charge enhancers

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2021年第9期14卷 3214-3227页

作者： Seung Gi Seo Jinheon Jeong Seung Yeob Kim ajit kumar Sung Hun Jin Department of Electronic Engineering Incheon National UniversityAcademy-ro 119Yeongsu-guIncheon 22012Republic of Korea

Confronted by the inherent physical limitations in scaling down Si technology,transition metal dichalcogenides(TMDCs)as alternatives are being tremendously researched and paid attention ***,mature counter doping technology for TMDCs is still elusive,and thus,a controllable and reversible charge enhancer is adopted for acceptor(or donor)-like doping via octadecyltrichlorosilane(ODTS)(or poly-L-lysine(PLL))***,multiple counter doping for TMDC field-effect transistors(FETs),combined with a threshold voltage(V;h)freezing scheme,renders the V_(th) modulation controllable,with negligible degradation and decent sustainability of FETs even after each treatment of a representative charge *** parallel,the counter doping mechanism is systematically investigated via photoluminescence spectroscopy,X-ray photoelectron spectroscopy,atomic force microscopy(AFM),surface energy characterization,and measurement of optoelectronic properties under illumination with light of various *** impressively,complementary inverters,composed of type-converted molybdenum ditelluride(MoTe_(2)>FETs and hetero-TMDC FETs in enhancement mode,are demonstrated via respective ODTS/PLL ***,driving backplane application for micro-light-emitting diode(p-LED)displays and physical validation of a corresponding counter doping scheme even for flexible polyethylene terephthalate(PET)substrates could be leveraged to relieve daunting challenges in the application of nanoscale Si-based three-dimensional(3D)stacked systems,with potential adoption of ultralow power and monolithic optical interconnection technology.

关键词： transition metal dichalcogenides(TMDCs) counter doping charge enhancer field-effect transistors micro-light-emitting diode(m-LED)