检索结果-南通市图书馆

Constructal design of a rectangular parallel phase change microchannel in a three-dimensional electronic device

Science China(Technological Sciences) 2024年第5期67卷 1381-1390页

作者： ZHANG JiWen FENG HuiJun CHEN Lingen ge YanLin Institute of Thermal Science and Power Engineering Wuhan Institute of TechnologyWuhan430205China College of Power Engineering Naval University of EngineeringWuhan430033China Hubei Provincial Engineering Technology Research Center of Green Chemical Equipment Wuhan430205China School of Mechanical&Electrical Engineering Wuhan Institute of TechnologyWuhan430205China

Based on constructal theory,a rectangular parallel phase change microchannel model in a three-dimensional electronic device(TDED)is established with R134a as the cooling *** on the minimization of a complex function(CF)composed of linear weighting sum of maximum temperature difference and pumping power consumption,constructal design of the TDED is conducted first;and then,maximum temperature difference and pumping power consumption are minimized by non-dominated sorting genetic algorithm-II *** results reveal that there exist an optimal mass flow rate(0.0012 kg/s)and a quadratic optimal aspect ratio(AR)(0.39)of the microchannel which lead to quadratic minimum CF(0.817).Compared with the original value,the CF after optimization is reduced by 18.34%.Reducing the inlet temperature of cooling fluid and microchannel number appropriately can help to enhance the overall performance of *** using the artificial neural network and genetic algorithms in the toolboxes of Matlab software,the optimal AR gained in the Pareto solution set is located between 0.2–*** smallest deviation index among three discussed strategies is 0.346,and the corresponding optimal AR is 0.413,which is selected as the optimal design strategy of the microchannel in the TDED under multiple *** findings in this study can serve as theoretical guides for thermal designs of electronic devices.

关键词： constructal theory parallel microchannel evaporation phase change three-dimensional electronic device multi-objective optimization artificial neural network

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Gas–solid reactor optimization based on EMMS-DPM simulation and machine learning

引用

Particuology 2024年第6期89卷 131-143页

作者： Haolei Zhang Aiqi Zhu Ji Xu Wei ge State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China State Key Laboratory of Multiphase Complex Systems Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China School of Chemical Engineering University of Chinese Academy of SciencesBeijing 100049China Innovation Academy for Green Manufacture Chinese Academy of SciencesBeijing 100190China

Design,scaling-up,and optimization of industrial reactors mainly depend on step-by-step experiments and engineering experience,which is usually time-consuming,high cost,and high *** numerical simulation can reproduce high resolution details of hydrodynamics,thermal transfer,and reaction process in reactors,it is still challenging for industrial reactors due to huge computational *** this study,by combining the numerical simulation and artificial intelligence(AI)technology of machine learning(ML),a method is proposed to efficiently predict and optimize the performance of industrial reactors.A gas–solid fluidization reactor for the methanol to olefins process is taken as an example.1500 cases under different conditions are simulated by the coarse-grain discrete particle method based on the Energy-Minimization Multi-Scale model,and thus,the reactor performance data set is *** develop an efficient reactor performance prediction model influenced by multiple factors,the ML method is established including the ensemble learning strategy and automatic hyperparameter optimization technique,which has better performance than the methods based on the artificial neural ***,the operating conditions for highest yield of ethylene and propylene or lowest pressure drop are searched with the particle swarm optimization algorithm due to its strength to solve non-linear optimization *** show that decreasing the methanol inflow rate and increasing the catalyst inventory can maximize the yield,while decreasing methanol the inflow rate and reducing the catalyst inventory can minimize the pressure *** two objectives are thus conflicting,and the practical operations need to be compromised under different circumstance.

关键词： Discrete particle method Artificial intelligence Machine learning Particle swarm optimization Industrial reactor optimization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Association between central serous chorioretinopathy and Helicobacter pylori infection: a systematic review and Meta-analysis

引用

International Journal of Ophthalmology(English edition) 2024年第6期17卷 1120-1127页

作者： Da-Wen Wu Fei-Peng Jiang ge ge Mei-Xia Zhang Department of Ophthalmology West China HospitalSichuan UniversityChengdu 610041Sichuan ProvinceChina Research Laboratory of Macular Disease West China HospitalSichuan UniversityChengdu 610041Sichuan ProvinceChina

AIM:To investigate the association between central serous chorioretinopathy(CSC)and Helicobacter pylori(Hp)by summarizing all available ***:The Scopus,Embase,EBSCO,PubMed,Web of Science,and Cochrane Library databases for all relevant studies published from inception to October 2022 were searched,and manually searched for relevant reference lists as a *** investigating the association between CSC and Hp infection were ***,8 case-control studies were included in the Meta-analysis after study ***:The results showed no significant correlation between Hp infection and CSC[odds ratio(OR)1.89,95%confidential interval(CI)0.58–6.15,I2=96%,P=0.29].After subgroup analysis based on the degree of development of the study(developing/developed countries),it was found that the results of the two subgroups were the same as the whole,and no significant difference between the two subgroups ***-regression showed that the effect of sample size on heterogeneity among studies was more prominent(P<0.01,adjusted R^(2)=89.72%),which can explain 89.72%of the sources of ***:This Meta-analysis reveals no significant correlation between Hp infection and CSC,which still warrants further well-designed extensive sample studies to reach a more reliable conclusion and promote a better understanding of the treatment of CSC.

关键词： central serous chorioretinopathy Helicobacter pylori infection retinal diseases Meta-analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Exponential Synchronization of Delayed Stochastic Complex Dynamical Networks via Hybrid Impulsive Control

引用

IEEE/CAA Journal of Automatica Sinica 2024年第3期11卷 785-787页

作者： Yao Cui Pei Cheng Xiaohua ge the School of Mathematic Science Anhui UniversityHefei 230601China IEEE the School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyMelbourne VIC 3122Australia

Dear Editor,This letter addresses the synchronization problem of a class of delayed stochastic complex dynamical networks consisting of multiple drive and response *** aim is to achieve mean square exponential synchronization for the drive-response nodes despite the simultaneous presence of time delays and stochastic noises in node dynamics.

关键词： dynamics stochastic letter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Digital light processing based multimaterial 3D printing:challenges,solutions and perspectives

引用

International Journal of Extreme Manufacturing 2024年第4期6卷 151-174页

作者： Jianxiang Cheng Shouyi Yu Rong Wang Qi ge Shenzhen Key Laboratory of Soft Mechanics&Smart Manufacturing Southern University of Science and TechnologyShenzhen 518055People's Republic of China Department of Mechanical and Energy Engineering Southern University of Science and TechnologyShenzhen 518055People's Republic of China

Multimaterial(MM)3D printing shows great potential for application in metamaterials,flexible electronics,biomedical devices and robots,since it can seamlessly integrate distinctive materials into one printed *** numerous MM 3D printing technologies,digital light processing(DLP)MM 3D printing is compatible with a wide range of materials from hydrogels to ceramics,and can print MM 3D structures with high resolution,high complexity and fast *** paper introduces the fundamental mechanisms of DLP 3D printing,and reviews the recent advances of DLP MM 3D printing technologies with emphasis on material switching methods and material contamination *** also summarizes a number of typical examples of DLP MM 3D printing systems developed in the past decade,and introduces their system structures,working principles,material switching methods,residual resin removal methods,printing steps,as well as the representative structures and ***,we provide perspectives on the directions of the further development of DLP MM 3D printing technology.

关键词： multimaterial 3D printing digital lightprocessing multimaterial 3Dstructures

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Molecular packing tuning via chlorinated end group enables efficient binary organic solar cells over 18.5%

引用

Carbon Energy 2024年第3期6卷 196-203页

作者： Yafeng Li Zhenyu Chen Xingzheng Yan Ziyi ge Zhejiang Business Technology Institute NingboZhejiangChina Zhejiang Engineering Research Center for Energy Optoelectronic Materials and Devices Ningbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingboZhejiangChina Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijingChina

Designing novel nonfullerene acceptors(NFAs)is of vital importance for the development of organic solar cells(OSC).Modification on the side chain and end group are two powerful tools to construct efficient ***,based on the high-performance L8BO,we selected 3-ethylheptyl to substitute the inner chain of 2-ethylhexyl,obtaining the backbone of *** we introduced different halogen atoms of fluorine and chlorine on 2-(3-oxo-2,3-dihydro-1Hinden-1-ylidene)malononitrile end group(EG)to construct efficient NFAs named BON3-F and BON3-Cl,*** donor D18 was chosen to combine with two novel NFAs to construct OSC ***,D18:BON3-Cl-based device shows a remarkable power conversion efficiency(PCE)of 18.57%,with a high open-circuit voltage(V_(OC))of 0.907 V and an excellent fill factor(FF)of 80.44%,which is one of the highest binary PCE of devices based on D18 as the ***,BON3-F-based device shows a relatively lower PCE of 17.79%with a decreased FF of 79.05%.The better photovoltaic performance is mainly attributed to the red-shifted absorption,higher electron and hole mobilities,reduced charge recombination,and enhanced molecular packing in the D18:BON3-Cl ***,we performed stability tests on two binary systems;the D18:BON3-Cl and D18:BON3-F devices maintain 88.1%and 85.5%of their initial efficiencies after 169 h of storage at 85°C in an N2-filled glove box,*** work demonstrates the importance of selecting halogen atoms on EG and provides an efficient binary system of D18:BON3-Cl for further improvement of PCE.

关键词： binary organic solar cell chlorinated end group molecular packing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Attack-Resilient Distributed Cooperative Control of Virtually Coupled High-Speed Trains via Topology Reconfiguration

引用

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 1066-1068页

作者： Shunyuan Xiao Xiaohua ge Qing Wu the Institute of Advanced Technology Nanjing University of Posts and TelecommunicationsNanjing 210023China the School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyMelbourne VIC 3122Australia the School of Engineering and Technology Central Queensland UniversityRockhampton QLD 4701Australia

Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber *** main purpose is to achieve distributed coordinati... 详细信息

关键词： prescribed Speed trains

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An ultra-thin bolt tension sensor and online monitoring system:For application in hydropower plant unit

引用

Frontiers of Structural and Civil Engineering 2024年第9期18卷 1388-1400页

作者： Shaoquan ZHANG Yanke TAN Hanbin ge Qilin ZHANG Department of Civil Engineering Meijo UniversityNagoya 4688502Japan College of Civil Engineering Tongji UniversityShanghai 200092China

The condition of bolted connections significantly affects the structural ***,conventional bolt tension sensors fail to provide precise measurements due to their bulky size or inadequate *** study employs the piezoresistive effect of crystalline silicon material to fabricate an ultrathin *** sensor exhibits a linear relationship between pressure and voltage,an exceptional stability at varying temperatures,and a superior resistance to corrosion,making it adaptable and user-friendly for applications of high-strength bolt tension monitoring.A monitoring system,incorporating the proposed sensor,has also been *** system provides real-time display of bolt tension and enables the assessment of sensor and structural conditions,including bolt loosening or component *** efficacy of the proposed sensor and monitoring system was validated through a project carried out at the Xiluodu Hydropower *** to the results,the sensor and online monitoring system effectively gauged and proficiently conveyed and stored bolt tension *** addition,correlations were created between bolt tensions and essential unit parameters,such as water head,active power,and pressures at vital points,facilitating anomaly detection and early warning.

关键词： ultra-thin sensor high-strength bolt tension online monitoring system anomaly alarm hydro-generator units

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Constructal design of a rectangular porous fin considering minimization of maximum temperature difference and pumping power consumption

引用

Science China(Technological Sciences) 2024年第3期67卷 919-929页

作者： LIU XiaoYe FENG HuiJun CHEN Lingen ge YanLin Institute of Thermal Science and Power Engineering Wuhan Institute of TechnologyWuhan 430205China College of Power Engineering Naval University of EngineeringWuhan 430033China Hubei Provincial Engineering Technology Research Center of Green Chemical Equipment Wuhan 430205China School of Mechanical&Electrical Engineering Wuhan Institute of TechnologyWuhan 430205China

A heat dissipation model of a rectangular porous fin is established based on constructal theory. First, the constructal design of rectangular porous fin is conducted by selecting a complex function minimization, which composed of linear weighting sum of maximum temperature difference and pumping power consumption, as optimization objective. Effects of gap height, air inlet velocity, total porous fin volume and porosity on the optimal constructs are investigated, respectively. The findings show that the complex function can attain its double minimum at a value of 0.802 when the fin length and number are optimized, and the corresponding optimal fin length and number are 8.01 mm and 10, respectively. In comparison to original design, the complex function and maximum temperature difference after twice optimization are decreased by 19.80% and 66.31%, ***, the comprehensive performance of porous fin is improved by simultaneously optimizing the fin length and number. The artificial neural network is applied to predict the fin performances, which is used to conduct multi-objective optimization based on NSGA-II algorithm. Optimal structure of porous fin for multiple requirements is gained by LINMAP and TOPSIS decisionmaking strategies. The findings in this study can serve as theoretical guides for fin thermal designs of electronic devices.

关键词： constructal theory rectangular porous fin pumping power consumption maximum temperature difference complex function multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

肱骨髁上骨折伴移位时神经损伤的观察

引用

中华小儿外科杂志 1996年第5期17卷 291-292页

作者：葛子钢范源王承武积水潭医院小儿外科北京100035

复习肱骨髁上骨折中神经损伤的治疗经验以指导临床工作。共收治８６例肱骨髁上骨折伴神经损伤病例，其中桡神经损伤４７例次，尺神经损伤３例次，正中神经损伤５０例次。因Ｘ线片上均有骨折移位及明显的旋转和短缩，多数患儿采取了非手... 详细信息

复习肱骨髁上骨折中神经损伤的治疗经验以指导临床工作。共收治８６例肱骨髁上骨折伴神经损伤病例，其中桡神经损伤４７例次，尺神经损伤３例次，正中神经损伤５０例次。因Ｘ线片上均有骨折移位及明显的旋转和短缩，多数患儿采取了非手术治疗。随访的５０例神经损伤病例中，４６例（９２％）经非手术治疗，神经功能恢复。４例（８％）手术探查后恢复功能。因此，移位型肱骨髁上骨折伴神经损伤应以保守治疗为主。挠神经损伤的恢复可观察３个月，正中神经损伤可观察２个月，超过恢复时限后应积极进行肌电图检查和手术治疗。

关键词：前臂损伤桡神经尺骨神经肱骨骨折骨折儿童

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：