检索结果-南通市图书馆

Construction of coal pitch-based HA-K grafted poly condensates and their excellent anti-temperature and viscosity-reducing properties

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2806-2816页

作者： Jing Tan wei Zhang Xiu-Ling Yan hao zhou Sher Bahadar Khan Seitkhan Azat Shi-You Yan hao-Jie Ma Xin-Tai Su Xinjiang Key Laboratory of Clean Conversion and High Value Utilization of Biomass Resources College of Chemistry and Chemical Engineering Yili Normal University School of Environment and Energy Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling South China University of Technology Drilling Fluid Branch of CNPC Xibu Drilling Engineering Company Limited Department of Chemistry Faculty of Science King Abdulaziz University PO Box 80203 Faculty of Chemistry and Chemical Technology Al-Farabi Kazakh National University Urumchi Huatailong Chemical Additives Co. Ltd.

Humic acids(HAs) are widely used as filtrate and viscosity reducers in drilling fluids. However, their practical utility is limited due to poor stability in salt resistance and high-temperature resistance. Hightemperature coal pitch(CP) is a by-product from coal pyrolysis above 650.C. The substance's molecular structure is characterized by a dense arrangement of aromatic hydrocarbon and alkyl substituents. This unique structure gives it unique chemical properties and excellent drilling performance, surpassing traditional humic acids in drilling operations. Potassium humate is prepared from CP(CP-HA-K) by thermal catalysis. A new type of high-quality humic acid temperature-resistant viscosity-reducer(Graft CP-HA-K polymer) is synthesized with CP-HA-K, hydrolyzed polyacrylonitrile sodium salt(Na-HPAN),urea, formaldehyde, phenol and acrylamide(AAM) as raw materials. The experimental results demonstrate that the most favorable conditions for the catalytic preparation of CP-HA-K are 1 wt% catalyst dosage, 30 wt% KOH dosage, a reaction temperature of 250.C, and a reaction time of 2 h, resulting in a maximum yield of CP-HA-K of 39.58%. The temperature resistance of the Graft CP-HA-K polymer is measured to be 177.39.C, which is 55.39.C higher than that of commercial HA-K. This is due to the abundant presence of amide, hydroxyl, and amine functional groups in the Graft CP-HA-K polymer,which increase the length of the carbon chains, enhance the electrostatic repulsion on the surface of solid particles. After being aged to 120.C for a specified duration, the Graft CP-HA-K polymer demonstrates significantly higher viscosity reduction(42.12%) compared to commercial HA-K(C-HA-K). Furthermore,the Graft CP-HA-K polymer can tolerate a high salt concentration of 8000 mg.L-1, measured after the addition of optimum amount of 3 wt% Graft CP-HA-K polymer. The action mechanism of Graft CP-HA-K polymer on high-temperature drilling fluid is that the Graft CP-HA-K polymer can increase the re

关键词： Viscosity breaker Heat resistance Base mud Graft CP-HA-K polymer CP Salt resistance

Copper-catalyzed enantioselective desymmetrizing C(sp^(2))-H functionalization of azide-ynamides via α-imino copper carbenes

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第9期67卷 2982-2988页

作者： En-He Huang Li-Gao Liu You-wei Yin hao-Xuan Dong Ji-Jia zhou Xin Lu Bo zhou Long-Wu Ye Key Laboratory for Chemical Biology of Fujian Province and State Key Laboratory of Physical Chemistry of Solid Surfaces College of Chemistry and Chemical EngineeringXiamen UniversityXiamen 361005China State Key Laboratory of Organometallic Chemistry Shanghai Institute of Organic ChemistryChinese Academy of SciencesShanghai 200032China

α-Imino metal carbenes are versatile intermediates in organic synthesis,and have broad applications in the assembly of divergent ***,the catalytic enantioselective desymmetrization based onα-imino metal carbenes has not been developed to ***,we disclose an enantioselective desymmetrizing C(sp^(2))-H functionalization of azide-ynamides viaα-imino copper carbenes,leading to the efficient assembly of divergent chiral indoloazepines in generally moderate to excellent yields with high ***,this reaction represents the first enantioselective desymmetrization based onα-imino metal *** synthetic transformations and biological tests show the potential utility of this ***,computational studies are employed to elucidate the reaction mechanism and the origin of enantioselectivity.

关键词： enantioselective desymmetrization metal carbenes copper catalysis nitrene transfer alkynes

Surface heterojunction based on n-type low-dimensional perovskite film for highly efficient perovskite tandem solar cells

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第05期11卷 244-253页

作者： Xianyuan Jiang Qilin zhou Yue Lu hao Liang Wenzhuo Li Qi wei Mengling Pan Xin Wen Xingzhi Wang wei zhou Danni Yu hao Wang Ni Yin hao Chen Hansheng Li Ting Pan Mingyu Ma Gaoqi Liu Wenjia zhou Zhenhuang Su Qi Chen Fengjia Fan Fan Zheng Xingyu Gao Qingqing Ji Zhijun Ning School of Physical Science and Technology Shanghai Tech University Department of Modern Physics University of Science and Technology of China i-Lab CAS Key Laboratory of Nanophotonic Materials and Devices Suzhou Institute of Nano-Tech and Nano-Bionics Shanghai Synchrotron Radiation Facility (SSRF) Shanghai Advanced Research InstituteChinese Academy of Sciences

Enhancing the quality of junctions is crucial for optimizing carrier extraction and suppressing recombination in semiconductor devices. In recent years, metal halide perovskite has emerged as the most promising next-generation material for optoelectronic devices. However, the construction of high-quality perovskite junctions, as well as characterization and understanding of their carrier polarity and density,remains a challenge. In this study, using combined electrical and spectroscopic characterization techniques,we investigate the doping characteristics of perovskite films by remote molecules, which is corroborated by our theoretical simulations indicating Schottky defects consisting of double ions as effective charge *** a post-treatment process involving a combination of biammonium and monoammonium molecules, we create a surface layer of n-type low-dimensional perovskite. This surface layer forms a heterojunction with the underlying 3D perovskite film, resulting in a favorable doping profile that enhances carrier extraction. The fabricated device exhibits an outstanding open-circuit voltage(VOC) up to 1.34 V and achieves a certified efficiency of 19.31% for single-junction wide-bandgap（1.77 eV） perovskite solar cells, together with significantly enhanced operational stability, thanks to the improved separation of carriers. Furthermore, we demonstrate the potential of this wide-bandgap device by achieving a certified efficiency of 27.04% and a VOCof 2.12 V in a perovskite/perovskite tandem solar cell configuration.

关键词： perovskite solar cells field effect transistors heterojunction

Phase field modeling of ferroelastic variant switching in yttria-stabilized t'zirconia with strain gradient elasticity and interface tension

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第5期67卷 1443-1457页

作者： zhou QianQian wei YueGuang zhou YiChun YANG Li College of Engineering BIC-ESATPeking UniversityBeijing100871China School of Advanced Materials and Nanotechnology Xidian UniversityXi’an710126China Frontier Research Center of Thin Films and Coatings for Device Applications Academy of Advanced Interdisciplinary ResearchXidian UniversityXi’an710126China

The 6–8 wt%yttria-stabilized zirconia with a tetragonal structure(t’-YSZ)is extensively employed in thermal barrier *** exceptional fracture toughness of t’-YSZ can be attributed to its distinctive ferroelastic toughening *** and interface tension play a critical role in ferroelastic variant switching at the micro-and *** paper presents an original thermodynamically consistent phase field(PF)theory for analyzing ferroelastic variant switching at the micro-and nano-scale of t’-*** theory incorporates strain gradient elasticity using higher-order elastic energy and interface tension tensor via geometric nonlinearity to represent biaxial tension resulting from interface ***,a mixed-type formulation is employed to implement the higher-order theory through the finite element *** an interface in equilibrium,the effects of strain gradient elasticity result in a more uniform distribution of stresses,whereas the presence of interface tension tensor significantly amplifies the stress magnitude at the *** introduction of an interface tension tensor increases the maximum value of stress at the interface by a factor of 4 to *** nucleation and evolution of variants at a pre-existing crack tip in a mono-phase t’-YSZ have also been *** strain gradient elasticity is capable of capturing the size effect of ferroelastic variant switching associated with microstructures in ***,when the grain size approaches that of the specimen,the critical load required for variant switching at the crack tip increases,resulting in greater dissipation of elastic energy during ferroelastic variant ***,the interface tension accelerates the evolution of *** presented framework exhibits significant potential in modeling ferroelastic variant switching at the micro-and nano-scale.

关键词： thermodynamics strain gradient elasticity interface tension phase field method ferroelastic variant switching

Experimental Investigation and X-Ray Computed Microtomography Simulation on Thermal Physical Properties of Foundation Materials after Molten Salt Leakage in the Storage Tank

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 591-601页

作者： WANG Zhaowen zhou hao LUO Jiawei LI Yawei FANG hao LIU Tianxiao State Key Laboratory of Clean Energy Utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou310027China

This paper studied the thermal physical properties of foundation materials in the molten salt tank of thermal energy storage system after molten salt leakage by Transient plane source experiment and X-ray computed microtomography simulation *** microstructure,thermal properties and pressure resistance with different particle diameters were *** measured heat conductivities from Transient plane source experiment for three cases are 0.49 W/(m·K),0.48 W/(m·K),and 0.51 W/(m·K),and the porosity is 30.1%,30.7%,and 31.2% *** heat conductivity simulating results of three cases are 0.471 W/(m·K),0.482W/(m·K),and 0.513 W/(m·K).The ratio of difference between the results of simulation and Transient plane source measurement is as low as 1.2%,verifying the reliability of experimental and simulation results to a certain *** with the heat conductivity of 0.097-0.129 W/(m·K) and porosity of 71.6%-78.9% without leaking salt,the porosity is reduced by more than 50% while the heat conductivity increased by 4 to 5 times after molten salt *** significant increase in heat conductivity has a great impact on security operation,structure design,and modeling of the tank foundation for solar power plants.

关键词： heat conductivity X-ray computed microtomography foundation materials three-phase threshold algorithm molten salt leakage

Multi-objective Optimization of Integrated Energy Systems Considering Ladder-type Carbon Emission Trading and Refined Load Demand Response

在线全文

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第3期12卷 828-839页

作者： Yanhong Luo haowei hao Dongsheng Yang Bowen zhou the Department of Electric Engineering Northeastern UniversityShenyang 110004China

In this paper,a novel multi-objective optimization model of integrated energy systems(IESs)is proposed based on the ladder-type carbon emission trading mechanism and refined load demand response ***,the carbon emission trading mechanism is introduced into the optimal scheduling of IESs,and a ladder-type carbon emission cost calculation model based on rewards and penalties is established to strictly control the carbon emissions of the ***,according to different response characteristics of electric load and heating load,a refined load demand response model is built based on the price elasticity matrix and substitutability of energy supply *** these basis,a multi-objective optimization model of IESs is established,which aims to minimize the total operating cost and the renewable energy source(RES)***,based on typical case studies,the simulation results show that the proposed model can effectively improve the economic benefits of IESs and the utilization efficiency of RESs.

关键词： Integrated energy system carbon emission trading load demand response renewable energy source

The Crystallization Behavior of L-Poly(lactic acid)/Polypropylene Blends:The Acceleration for Both L-Poly(lactic acid)and Polypropylene

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第6期42卷 775-786页

作者： Shuang-Cheng Li wei-Jia zhou Wen-Jie Wu Jun Shao Shui-Liang Chen hao-Qing Hou Sheng Xiang College of Chemistry&Chemical Engineering and Nanofiber Engineering Center of Jiangxi Province Jiangxi Normal UniversityNanchang330022China National Engineering Research Center for Carbohydrate Synthesis/Key Lab of Fluorine and Silicon for Energy Materials and Chemistry of Ministry of Education Jiangxi Normal UniversityNanchang330022China Wenzhou Institute University of Chinese Academy of SciencesWenzhou325001China

For a polymer/polymer dismissible blend with two crystallizable components,the crystallization behavior of different components and the reciprocal influences between different crystals are interesting and important,but did not investigate in *** this study,the L-poly(lactic acid)/polypropylene(PLLA/PP)blends with different weight ratios were prepared by melt mixing and the crystallization behavior of the blends were *** showed that the crystalline structures of PLLA and PP were not altered by the *** the crystallization of PLLA,both the diffusion of chain segments and crystallization rate were enhanced under the existence of PP *** the crystallization of PP,its crystallization rate was depressed under the existence of amorphous PLLA molecular *** the PP crystallized from the existence of PLLA crystals,although the diffusion rate of PP was reduced by PLLA crystals,the nucleation positions were obviously enhanced,which accelerated the formation of PP *** investigation would supply more basic data for the application of PLLA/PP blend.

关键词： L-poly(lactic acid) Polypropylene Blends Crystalization behavior Crystallization acceleration

2D all-organic perovskites refine flexible electronics

在线全文

学校读者我要写书评

暂无评论

Science China Materials 2024年第7期67卷 2365-2366页

作者： wei zhou Bing Chen College of Electronic and Optical Engineering and College of Flexible Electronics(Future Technology) Nanjing University of Posts and TelecommunicationsNanjing 210023China

Recent years have witnessed a paradigm shift with the advent of perovskites,a class of materials with a distinct CaTiO_(3)-type crystalline structure that show remarkable promise across a wide array of applications,including photovoltaics,photodetectors,lighting,lasers,and so *** them,the development of two-dimensional(2D)perovskites has garnered significant attention due to their tunable structures(mainly Dion-Jacobson and Ruddlesden-Popper structures)and enhanced stability in comparison with their 3D counterparts[1].Amidst the burgeoning research on perovskites,on the other side,all-organic perovskites stand out as a particularly intriguing subset[2].Unlike traditional perovskites that typically comprise all-inorganic(e.g.,CsPbBr_(3))or organic-inorganic hybrid components(e.g.,(PEA)_(2)PbI_(4)),all-organic perovskites are composed entirely of carbon-or nitrogen-based molecules.

关键词： perovskite inorganic entirely

Peroxidase-like nanozyme based microenvironment-responsive injectable hydrogel for bacteria-infected wound healing

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2024年第10期67卷 3247-3260页

作者： zhou wei LI XiaNan TANG MengCheng PAN LingFeng WANG BeiBei ZHANG hao ZHANG Han WANG ShiBo KONG XiangDong Institute of Smart Biomaterial Materials School of Materials Science and EngineeringZhejiang University of Science & Technology Zhejiang-Mauritius Joint Research Center for Biomaterials and Tissue Engineering Zhejiang University of Science & Technology

Hydrogel stands out as one of the most attractive wound dressings due to its excellent moisturizing properties and capacity to absorb wound exudates. However, conventional hydrogel dressings often lack responsiveness to the microenvironment, merely acting as protective barriers for the wound. Consequently, they exhibit limited effectiveness in preventing infection and facilitating wound repair. To address these problems, we have developed a multifunctional injectable hydrogel, CF/MS@HG, based on peroxidase-like nanozymes, aiming at rapidly healing bacterial-infected wounds. The hydrogel is mainly composed of oxidized sodium alginate, aminated gelatin, and polylysine, encapsulating MIL-101(CuFe) NPs(CF) and manganese selenide nanoparticles(MnSe2NPs, or MS NPs). After injection, the complex rapidly gelatinizes at the infected wound site through a Schiff base reaction. In vitro experiments have demonstrated the hydrogel's strong adhesion and self-healing ***, CF exhibiting peroxidase(POD)-like activity, catalyzes in situ hydrogen peroxide(H2O2) to generate highly toxic hydroxyl radicals(·OH) within the wound microenvironment, inducing oxidative damage to bacteria. Meanwhile, MS decomposes into H2Se in the slightly acidic wound microenvironment, disrupting bacterial metabolism and inhibiting *** addition of polylysine further enhances the hydrogel's antibacterial properties. In vivo experiments have shown that the hydrogel exhibits excellent biological safety and significantly promotes wound healing. This multifunctional smart hydrogel holds great promise for the treatment of bacterial-infected wounds.

关键词： peroxidase-like nanozyme manganese selenide injectable hydrogel bacterial infection wound healing