检索结果-南通市图书馆

Investigations of methane adsorption characteristics on marine-continental transitional shales and gas storage capacity models considering pore evolution

引用

Petroleum Science 2024年第4期21卷 2273-2286页

作者： Chen-Gang Lu Xian-Ming Xiao zhen-qian xue Zhang-Xin Chen Yin-Tao Dong Yue Feng Gang Li School of Energy Resources China University of Geosciences (Beijing) School of Civil and Environmental Engineering Nanyang Technological University Chemical and Petroleum Engineering University of Calgary Eastern Institute of Technology (tentative) CNOOC Research Institute

Methane adsorption is a critical assessment of the gas storage capacity(GSC) of shales with geological conditions. Although the related research of marine shales has been well-illustrated, the methane adsorption of marine-continental transitional(MCT) shales is still ambiguous. In this study, a method of combining experimental data with analytical models was used to investigate the methane adsorption characteristics and GSC of MCT shales collected from the Qinshui Basin, China. The Ono-Kondo model was used to fit the adsorption data to obtain the adsorption parameters. Subsequently, the geological model of GSC based on pore evolution was constructed using a representative shale sample with a total organic carbon(TOC) content of 1.71%, and the effects of reservoir pressure coefficient and water saturation on GSC were explored. In experimental results, compared to the composition of the MCT shale, the pore structure dominates the methane adsorption, and meanwhile, the maturity mainly governs the pore structure. Besides, maturity in the middle-eastern region of the Qinshui Basin shows a strong positive correlation with burial depth. The two parameters, micropore pore volume and non-micropore surface area, induce a good fit for the adsorption capacity data of the shale. In simulation results, the depth,pressure coefficient, and water saturation of the shale all affect the GSC. It demonstrates a promising shale gas potential of the MCT shale in a deeper block, especially with low water saturation. Specifically,the economic feasibility of shale gas could be a major consideration for the shale with a depth of 60% in the Yushe-Wuxiang area. This study provides a valuable reference for the reservoir evaluation and favorable block search of MCT shale gas.

关键词： High-pressure methane adsorption Marine-continental transitional shale gas Ono-Kondo model Adsorption thermodynamics Gas storage capacity model

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

The tangential k-Cauchy-Fueter type operator and Penrose type integral formula on the generalized complex Heisenberg group

引用

Applied Mathematics(A Journal of Chinese Universities) 2024年第1期39卷 181-190页

作者： REN Guang-zhen SHI Yun KANG qian-qian Department of Mathematics Zhejiang International Studies UniversityHangzhou 310023China Department of Mathematics Zhejiang University of Science and TechnologyHangzhou 310023China

The tangential k-Cauchy-Fueter operator and k-CF functions are counterparts of the tangential Cauchy–Riemann operator and CR functions on the Heisenberg group in the theory of several complex variables,*** this paper,we introduce a Lie group that the Heisenberg group can be imbedded into and call it generalized complex *** investigate quaternionic analysis on the generalized complex *** also give the Penrose integral formula for k-CF functions and construct the tangential k-Cauchy-Fueter complex.

关键词： the generalized complex Heisenberg group the tangential k-Cauchy-Fueter type operator Penrose-type integral formula

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surface quality investigation in high-speed dry milling of Ti-6Al-4V by using 2D ultrasonic-vibration-assisted milling platform

引用

Advances in Manufacturing 2024年第2期12卷 349-364页

作者： Jin Zhang Li Ling qian-Yue Wang xue-Feng Huang Xin-zhen Kang Gui-Bao Tao Hua-Jun Cao College of Mechanical and Vehicle Engineering Chongqing UniversityChongqing400044People’s Republic of China State Key Laboratory of Mechanical Transmissions Chongqing UniversityChongqing400044People’s Republic of China Aerospace Research Institute of Materials and Processing Technology Beijing100076People’s Republic of China

Ultrasonic-vibration-assisted milling(UVAM)is an advanced method for the efficient and precise machining of difficult-to-machine materials in modern ***,the milling efficiency is limited because the ultrasonic vibration toolholder ER16 collet has a critical cutting ***,a 2D UVAM platform is built to ensure precision machining efficiency and improve the surface quality without changing the milling *** evaluate this 2D UVAM platform,ultrasonic-vibration-assisted high-speed dry milling(UVAHSDM)is performed to process a titanium alloy(Ti-6Al-4V)on the platform,and the milling temperature,surface roughness,and residual stresses are selected as the important indicators for performance *** results show that the intermittent cutting mechanism of UVAHSDM combined with the specific spindle speed,feed speed,and vibration amplitude can reduce the milling temperature and improve the texture of the machined *** with conventional milling,UVAHSDM reduces surface roughness and peak-groove surface profile values and extends the range of residual surface compressive stresses from−413.96 MPa to−600.18 *** excellent processing performance demonstrates the feasibility and validity of applying this 2D UVAM platform for investigating surface quality achieved under UVAHSDM.

关键词： 2D ultrasonic-vibration-assisted milling(UVAM)platform Ultrasonic-vibration-assisted high-speed dry milling(UVAHSDM) Milling temperature Surface roughness Residual stress

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mechanical property of cylindrical sandwich shell with gradient core of entangled wire mesh

引用

Defence Technology（防务技术） 2024年第1期31卷 510-522页

作者： Xin xue Chao zheng Fu-qiang Lai xue-qian Wu Institute of Metal-rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou350116China Fujian Metallurgical Industry Design Institute Fuzhou350116China

To explore the wide-frequency damping and vibration-attenuation performances in the application of aerospace components,the cylindrical sandwich shell structure with a gradient core of entangled wire mesh was proposed in this ***,the gradient cores of entangled wire mesh in the axial and radial directions were prepared by using an in-house Numerical Control weaving machine,and the metallurgical connection between skin sheets and the gradient core was performed using vacuum ***,to investigate the mechanical properties of cylindrical sandwich shells with axial or radial gradient cores,quasi-static and dynamic mechanical experiments were carried *** primary evaluations of mechanical properties include secant stiffness,natural frequency,Specific Energy Absorption(SEA),vibration acceleration level,and so *** results suggest that the vibration-attenuation performance of the sandwich shell is remarkable when the high-density core layer is at the end of the shell or abuts the inner *** axial gradient material has almost no influence on the vibration frequencies of the shell,whereas the vibration frequencies increase dramatically when the high-density core layer approaches the ***,compared to the conventional sandwich shells,the proposed functional grading cylindrical sandwich shell exhibits more potential in mass reduction,stiffness designing,and energy dissipation.

关键词： Entangled wire mesh Gradient cylindrical sandwich shell Vacuum brazing Secant stiffness Damping

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

SAC-Based Computation Offloading for Reconfigurable Intelligent Surface-Aided Mobile Edge Networks

引用

China Communications 2024年第6期21卷 261-270页

作者： Li Bin qian zhen Fei Zesong School of Computer Science Nanjing University of Information Science&TechnologyNanjing 210044China Jiangsu Collaborative Innovation Center of Atmospheric Environment and Equipment Technology(CICAEET) Nanjing University of Information Science&TechnologyNanjing 210044 School of Information and Electronics Beijing Institute of TechnologyBeijing 100081China

In this paper,we concentrate on a reconfigurable intelligent surface(RIS)-aided mobile edge computing(MEC)system to improve the offload efficiency with moving user equipments(UEs).We aim to minimize the energy consumption of all UEs by jointly optimizing the discrete phase shift of RIS,UEs’transmitting power,computing resources allocation,and the UEs’task offloading strategies for local computing and *** formulated problem is a sequential decision making across multiple coherent time ***,the mobility of UEs brings uncertainties into the decision-making *** cope with this challenging problem,the deep reinforcement learning-based Soft Actor-Critic(SAC)algorithm is first proposed to effectively optimize the discrete phase of RIS and the UEs’task offloading ***,the transmitting power and computing resource allocation can be determined based on the *** results demonstrate that the proposed algorithm can be trained more stably and perform approximately 14%lower than the deep deterministic policy gradient benchmark in terms of energy consumption.

关键词： MEC RIS soft actor-critic user mobility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical performance of 22SiMn2TiB steel welded with lowtransformation- temperature filler wire and stainless steel filler wire

引用

Journal of Iron and Steel Research International 2024年第4期31卷 967-981页

作者： Zi-dong Lin Kai-jie Song zhen Sun Zi-qian Zhu xue-feng Zhao Constantinos Goulas Wei Ya Xing-hua Yu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401120China Department of Design Production and Management Faculty of Engineering Technology.University of TwenteEnschede 7500 AETheNetherlands Rotterdam Additive Manufacture Fieldlab(RAMLAB) Rotterdam 3089 JWTheNetherlands

TX-80 low-transformation-temperature(LTT)welding wire was used to replace the traditional ER 307Si welding wire to realize the connection of 22SiMn2TiB armor steel in manual overlay *** previously existing issues,such as welding cracks,large welding deformation,and severe welding residual stress,were solved to ensure good strength and ductility *** particular,with the same welding conditions,TX-80 LTT wire eliminates welding *** reduces the welding deformation no matter the base pretreatment of pre-setting angle or no pre-setting *** comparison,it was found that the microstructure at the TX-80 weld is mainly composed of martensite and a small amount of retained *** contrast,the microstructure of the ER 307Si weld consists of a large amount of austenite and a small amount of skeleton-like *** variation trend of residual stress and microhardness from the weld to the base were investigated and compared with the mechanical properties of base *** TX-80 and the ER 307Si tensile samples elongation is 6.76%and 6.01%,while the ultimate tensile strengths are 877 and 667 MPa,*** average impact toughness at room temperature of the ER 307Si weld is 143.9 J/cm^(2),much higher than that of the TX-80 weld,which is only 36.7 J/cm^(2).The relationship between impact and tensile properties with microstructure species and distribution was *** addition,the fracture surface of the tensile and the impact samples was observed and *** dimples,fewer pores,larger radiation zone,and shear lips of TX-80 samples indicate better tensile ductility and worse impact toughness than those of ER 307Si weld.

关键词： Low-transformation-temperature material 22SiMn2TiB steel Welding deformation Residual stress Martensitic transformation Mechanical property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Emerging perovskite materials for supercapacitors:Structure,synthesis,modification,advanced characterization,theoretical calculation and electrochemical performance

引用

Journal of Energy Chemistry 2024年第2期89卷 41-70,I0003页

作者： Yuehua qian Qingqing Ruan Mengda xue Lingyun Chen Department of Applied Chemistry School of Chemistry and Chemical EngineeringChongqing UniversityChongqing 401331China

As a new generation electrode materials for energy storage,perovskites have attracted wide attention because of their unique crystal structure,reversible active sites,rich oxygen vacancies,and good *** this review,the design and engineering progress of perovskite materials for supercapacitors(SCs)in recent years is ***,the review will focus on four types of perovskites,perovskite oxides,halide perovskites,fluoride perovskites,and multi-perovskites,within the context of their intrinsic structure and corresponding electrochemical performance.A series of experimental variables,such as synthesis,crystal structure,and electrochemical reaction mechanism,will be carefully analyzed by combining various advanced characterization techniques and theoretical *** applications of these materials as electrodes are then featured for various ***,we look forward to the prospects and challenges of perovskite-type SCs electrodes,as well as the future research direction.

关键词： Perovskite Modification engineering Oxygen vacancy Theoretical calculation methodology Supercapacitor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Identification of anti-gastric cancer effects and molecular mechanisms of resveratrol: From network pharmacology and bioinformatics to experimental validation

引用

World Journal of Gastrointestinal Oncology 2024年第2期16卷 493-513页

作者： Ying-qian Ma Ming Zhang zhen-Hua Sun Hong-Yue Tang Ying Wang Jiang-xue Liu Zhan-xue Zhang Chao Wang Department of Oncology Hebei General HospitalShijiazhuang 050051Hebei ProvinceChina School of Graduate Studies Hebei Medical UniversityShijiazhuang 050017Hebei ProvinceChina Clinical Medical Research Center Hebei General HospitalShijiazhuang 050051Hebei ProvinceChina Department of Gastrointestinal Surgery Second Hospital of Hebei Medical UniversityShijiazhuang 050000Hebei ProvinceChina

BACKGROUND Gastric cancer(GC)is one of the most aggressive malignancies with limited therapeutic options and a poor ***,a non-flavonoid poly-phenolic compound found in a variety of Chinese medicinal materials,has shown excellent anti-GC ***,its exact mechanisms of action in GC have not been *** To identify the effects of resveratrol on GC progression and explore the related molecular *** Action targets of resveratrol and GC-related targets were screened from public *** overlapping targets between the two were confirmed using a Venn diagram,and a“Resveratrol-Target-GC”network was constructed using Cyto-scape software version *** protein-protein interaction(PPI)network was constructed using STRING database and core targets were identified by PPI network *** Database for Annotation,Visualization and Integrated A total of 378 resveratrol action targets and 2154 GC disease targets were obtained from public databases,and 181 intersection targets between the two were screened by Venn *** top 20 core targets were identified by PPI network analysis of the overlapping *** function analysis mainly involved protein binding,identical protein binding,cytoplasm,nucleus,negative regulation of apoptotic process and response to xenobiotic *** enrichment analysis suggested that the involved signaling pathways mainly included PI3K-AKT signaling pathway,MAPK signaling pathway,IL-17 signaling pathway,TNF signaling pathway,ErbB signaling pathway,*** murine osteosarcoma viral oncogene homolog(FOS)and matrix metallopeptidase 9(MMP9)were selected by differential expression analysis,and they were closely associated with immune *** docking results showed that resveratrol docked well with these two *** treatment arrested the cell cycle at the S phase,induced apoptosis,and weakened viability,migration and invasion in a dose-dependent ***,re

关键词： Resveratrol Gastric cancer Network pharmacology Bioinformatics Molecular docking

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Electroacupuncture Promotes Angiogenesis in Mice with Cerebral Ischemia by Inhibiting miR-7

引用

Chinese Journal of Integrative Medicine 2024年第6期30卷 543-550页

作者： YU qian SHU Shi JU Xin-yao PENG Wei REN xue-qi SI Shu-han SONG Shi-zhen XIE xue-yun FANG Bang-jiang ZHOU Shuang School of Acupuncture-Moxibustion and Tuina Shanghai University of Traditional Chinese MedicineShanghai201203China College of Basic Medicine Shanghai University of Traditional Chinese MedicineShanghai201203China Department of Emergency Longhua HospitalShanghai University of Traditional Chinese MedicineShanghai200032China

Objective To observe the angiogenesis effect of electroacupuncture(EA)at Shuigou acupoint(GV 26)in the treatment of cerebral ischemia,and explore the value of miRNA-7(miR-7)in *** First,48 mice were randomly divided into sham operation,middle cerebral artery occlusion(MCAO)model,and EA treatment *** 9 mice were divided into carrier control group,miR-7 knockout group and miR-7 overexpression group(n=3 each group).Finally,20 mice were divided into model and carrier control group,model and miR-7 knockout group,EA treatment and carrier control group and EA treatment and miR-7 overexpression group,with 3–6 mice in each *** MCAO model was established in the MCAO and EA *** deficit score and 2,3,5-triphenyltetrazolium chloride(TTC)staining were used to evaluate the severity of cerebral ***-eosin staining was used to describe basic pathological *** was used to quantify cerebral microvessel ***-time PCR and Western blot were used to detect the expression of miR-7 and its downstream target genes Krüppel-like factor 4/vascular endothelial growth factor(KLF4/VEGF)and angiopoietin-2(ANG-2)in the ischemic cerebral *** After EA,neurological deficit scores and infarction volumes decreased,and the density of cerebral microvessels *** the MCAO group,miR-7 expression was higher than that in the sham group(P<0.01).After EA at GV 26,miR-7 expression decreased(P<0.01)and the expression of downstream target genes KLF4/VEGF and ANG-2 increased as compared with the MCAO group(P<0.01).After EA combined with overexpression of miR-7,the expression of downstream target genes KLF4/VEGF and ANG-2 decreased compared to the control EA group(P<0.01).After miR-7 knockdown,the expression of KLF4/VEGF and ANG-2 increased(P<0.05 or P<0.01).Conclusions EA could promote angiogenesis in MCAO mice likely by inhibiting the expression of miR-7 and relieving inhibition of downstream target genes KLF4/VEG

关键词： electroacupuncture cerebral ischemia miRNA-7 angiogenesis Shuigou(GV 26) acupuncture points

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Perspective for OER electrocatalysts:Lattice engineering of clay-like frameworks with near-surface cluster active sites

引用

Science China(Technological Sciences) 2024年第1期67卷 330-334页

作者： ZHANG DanTong qian BinBin xue DongFeng Multiscale Crystal Materials Research Center Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Near-surface cluster active centers(NSCAC)are pivotal functional units in the catalysis of oxygen evolution reaction(OER),which exceeds the limitations imposed by the diverse coordination environments experienced in atomic and molecular active centers,thereby serving as an exceptional medium for exploring the dynamic catalytic processes of metal active sites[1,2].In the OER,the NSCAC primarily consist of the catalytic site and the first neighboring coordinating *** investigation of NSCAC surpasses the exclusive reliance on the electron state regulation mechanism at the atomic level.

关键词： cluster centers exceptional

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：