检索结果-南通市图书馆

Micro defects formation and dynamic response analysis of steel plate of quasi-cracking area subjected to explosive load

引用

Defence Technology（防务技术） 2024年第1期31卷 580-593页

作者： Zheng-qing Zhou ze-chen Du Xiao Wang Hui-ling Jiang Qiang Zhou Yu-long zhang Yu-zhe Liu Pei-ze zhang Research Institute of Macro-Safety Science University of Science and TechnologyBeijing100083China School of Civil and Resource Engineering University of Science and Technology BeijingBeijing100083China School of Mechanical Engineering Nantong UniversityNantong226019China China North Industry Advanced Technology Generalization Institute Beijing100089China China Academy of Ordnance Science China

As the protective component,steel plate had attracted extensive attention because of frequently threats of explosive *** this paper,the evolution of microstructure and the mechanism of damage in the quasi-cracking area of steel plate subjected to explosive load were discussed and the relationships between micro defects and dynamic mechanical response were *** the explosion experiment,five observation points were selected equidistant from the quasi-cracking area of the section of the steel plate along the thickness direction,and the characteristics of micro defects at the observation points were analyzed by optical microscope(OM),scanning electron microscope(SEM) and electron backscattered diffraction(EBSD).The observation result shows that many slip bands(SBs) appeared,and the grain orientation changed obviously in the steel plate,the two were the main damage types of micro *** addition,cracks,peeling pits,grooves and other lager micro defects were appeared in the lower area of the *** stress parameters of the observation points were obtained through an effective numerical *** mechanism of damage generation and crack propagation in the quasicracking area were clarified by comparing the specific impulse of each observation point with the corresponding micro *** result shows that the generation and expansion of micro defects are related to the stress area(*** upper compression area,the neutral plane area,and the lower tension area).The micro defects gather and expand at the grain boundary,and will become macroscopic damage under the continuous action of tensile ***,the micro defects at the midpoint of the section of the steel plate in the direction away from the explosion center(*** horizontal direction) were also *** was found that the specific impulse at these positions were much smaller than that in the thickness direction,the micro defects were only SBs and a few micro cracks,and the those decrea

关键词： Explosive load Quasi-cracking area Micro defects Steel plate Dynamic response Numerical simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fine Sand and Clay Sediment Acoustic Properties of the Novel Sediment Sample from the Arabian Sea:Experimental Investigations and Biot−Stoll Model Validation

引用

China Ocean Engineering 2024年第1期38卷 169-180页

作者： Shahabuddin SHAIKH HUANG Yi-wang zhang ze-chuan Habib Hussain ZUBERI National Key Laboratory of Underwater Acoustic Technology and College of Underwater Acoustic Engineering Harbin Engineering UniversityHarbin 150001China

The present study explores the physical and acoustic characteristics of fine sand and clay in novel seabed marine sediments from of Pakistan coastline of the Arabian *** measured physical parameters included mean grain size,mass density,bulk density,salinity,porosity,permeability,pore size and mineralogical *** properties,including sound speed and attenuation,in the high frequency range of 90-170 kHz were analyzed.A controlled laboratory setup with the acoustic transmission method and Fourier transform techniques was utilized to examine the sound propagation and absorption of novel seabed *** standard deviation of mean sound speed in fresh water was 0.75 m/s,and attenuation was observed in the range of 0.43 to 0.61 dB/*** mean sound velocity in sand and clay varied from 1706 to 1709 m/s and 1602 to 1608 m/s,*** average attenuation was observed at 80 to 93 dB/m in sandy sediments and from 31.8 to 38.6 dB/m in clayey *** velocity variation within sandy sediment is low,consistent with expected results,and smaller than the predicted ***,clay sediment exhibited a positive linear correlation and low sound speed *** increased linearly with frequency for both ***,the laboratory results were validated by using the Biot−Stoll *** dispersion of sound speed in sandy and clayey sediments was consistent with the predictions of the Biot−Stoll *** attenuation aligned more with Biot−Stoll model predictions due to improved permeability,tortuosity and pore size parameter fitting.

关键词： physical and acoustic characteristics marine sediments sound speed attenuation Biot−Stoll model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Static recrystallization behaviors and mechanisms of 7Mo super-austenitic stainless steel with undissolved sigma precipitates during double-stage hot deformation

引用

Journal of Iron and Steel Research International 2024年第2期31卷 475-487页

作者： Shi-guang Xu Jin-shan He Run-ze zhang Fu-cheng zhang Xi-tao Wang Collaborative Innovation Center of Steel Technology University of Science and Technology BeijingBeijing100083China State Key Laboratory of Metastable Materials Science and Technology Yanshan UniversityQinhuangdao066004HebeiChina Shandong Provincial Key Laboratory for High Strength Lightweight Metallic Materials Advanced Materials InstituteQilu University of Technology(Shandong Academy of Science)Jinan250353ShandongChina

Static recrystallization(SRX)behaviors and corresponding recrystallization mechanisms of 7Mo super-austenitic stainless steel were studied under different deformation *** order of influence of deformation parameters on static recrystallization behaviors,from high to low,is followed by temperature,first-stage strain and strain ***,the effect of holding time on static recrystallization behaviors is significantly controlled by *** addition,with the increase in temperature from 1000 to 1200°C,the static recrystallization mechanism evolves from discontinuous static recrystallization and continuous static recrystallization(cSRX)to metadynamic recrystallization and cSRX,and finally to *** cSRX exists at all *** is because high stacking fault energy(56 mJ m−2)promotes the movement of dislocations,making the deformation mechanism of this steel is dominated by planar slip of *** undissolved sigma precipitates promote static recrystallization through particle-stimulated ***,small strain-induced precipitates at grain boundaries hinder the nucleation of conventional SRX and the growth of recrystallized grains,while the hindering effect decreases with the increase in temperature.

关键词： 7Mo super-austenitic stainless steel Double-stage hot deformation Conventional static recrystallization Metadynamic recrystallization Strain-induced precipitation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Masculinizer gene controls sexual differentiation in Hyphantria cunea

引用

Insect Science 2024年第2期31卷 405-416页

作者： Xiaowei Li Huihui Liu Honglun Bi Yaohui Wang Jun Xu Sufang zhang Zhen zhang ze zhang Yongping Huang Laboratory of Evolutionary and Functional Genomics School of Life SciencesChongqing UniversityChongqingChina CAS Key Laboratory of Insect Developmental and Evolutionary Biology CAS Centerfor Excellence in Molecular Plant SciencesInstitute of Plant Physiology and EcologyShanghaiChina Key Laboratory of Forest Protection Research Institute of Forest EcologyEnvironment and ProtectionChinese Academy of ForestryState Forestry AdministrationBeijingChina

The Masculinizer gene,Masc,encodes a lepidopteran-specific novel CCCHtype zinc finger protein,which controls sex determination and dosage compensation in Bombyx *** the potential application of it in pest control,it is necessary to investigate the function of Masc gene in Hyphantria cunea,a globally invasive forest *** the present study,we identified and functionally characterized the Masc gene,HcMasc,in *** analysis revealed that HcMASC contained the conserved CCCH-type zinc finger domain,nuclear localization signal,and male determining domain,in which the last was confirmed to be required for its masculinization in BmN cell ***,expression data showed that unlike male-biased expression in ***,Hc-Masc gene expresses in main all developmental stages or tissues in both *** regularly interspaced palindromic repeats(CRISPR)/CRISPR-associated protein 9-based disruption of the common exons 1 and 3 of the HcMasc gene resulted in imbalanced sex ratio and abnormal external genitalia of both *** results suggest that the HcMasc gene is required for both male and female sexual differentiation and dosage compensation in *** and provide a foundation for developing better strategies to control this pest.

关键词： CRISPR/Cas9 dosage compensation Hyphantria cunea Masc sexual differentiation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Syntheses and properties of associative acrylamide copolymers containing short hydrophobic chains used in a friction reducer for slick-water fracturing

引用

Petroleum Science 2024年第3期21卷 1889-1901页

作者： Ya-Xing Dai Xian-Li zhang Si-Yuan Liu Feng-Run-ze zhang Yi-Xi zhang Yu-Tong Sang Jing-Xi Zheng Zhao-Sheng Liu Peng zhang College of Chemistry and Chemical Engineering Chongqing University of Science and TechnologyChongqing401331China College of Ecology and Environment Chongqing Resources and Environmental Protection of UniversityChongqing401331China China China Property Project Department of Dezhou Mining Property Service CenterShengli Oilfield Company of SinopecDezhou253000ShandongChina

Two allyldimethylalkyl quaternary ammonium salt(AQAS)monomers,N,N-dimethylallylphenylpropylammonium bromide(AQAS1)and N,N-dimethylallylnonylammonium bromide(AQAS2),were synthesized and used to prepare modified polyacrylamide *** new drag reducers were synthesized from acrylamide(AM),sodium acrylate(Na AA)and a cationic modified monomer(AQAS1 or AQAS2)via aqueous solution polymerization,and the copolymers were named P(AM/Na AA/AQAS1)and P(AM/Na AA/AQAS2),*** structures of the drag reduction agents were confirmed by IR and1H NMR *** molecular weight(Mw)of P(AM/Na AA/AQAS1)was 1.79×10^(6)g/*** the copolymer concentration was 1000 mg/L and the flow rate was 45 L/min,in fresh water the highest drag reduction rate was 75.8%,in 10,000 mg/L Na Cl solution the drag reduction rate decreased to 72.9%.The molecular weight of P(AM/Na AA/AQAS2)was 3.17×10^(6)g/*** the copolymer concentration was500 mg/L and the flow rate was 45 L/min,the drag reduction rate reached 75.2%,and in 10,000 mg/L Na Cl solution the drag reduction rate was 73.3%,decreased by approximately 1.9%.The drag reduction rate for partially hydrolyzed polyacrylamide(HPAM)was also investigated,and the results showed that the drag reduction rates for 500 and 1000 mg/L HPAM solutions were merely 43.2%and 49.0%in brine,*** with HPAM,both of the above copolymers presented better drag reduction capacities.

关键词： Shale gas Slick water Drag reducer Modified monomer Copolymerization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Controlling the Si/C ratio in SiC matrix based on the modified polymethysilane for C/C-SiC composites with enhanced mechanical properties

引用

Journal of Advanced Ceramics 2024年第2期13卷 220-236页

作者： Mingdong Liao Xiebo Hu Chenghao Zhong Ping Xu Xiaodong Wang ze zhang Peng Zhou Mingyu zhang Zhean Su Qizhong Huang National Key Laboratory of Science and Technology on High-Strength Structural Materials Central South UniversityChangsha 410083China

Fabricating SiC matrix with controllable Si/C ratio for C/C-SiC composites via precursor infiltration and pyrolysis is difficult to realize due to the absence of suitable ***,SiC precursors with Si-rich(Si/C=1.23),nearstoichiometric(Si/C=1.01),and C-rich(Si/C=0.88)pyrolyzed ceramics at 1200℃ were successfully synthesized by the novel modification of *** structure and ceramization of synthesized SiC precursors were studied,and C/C-SiC composites with similar Si/C ratio in SiC matrix were also *** results revealed that the defects and Young’s modulus of SiC matrix and the thermal residual stress on pyrolytic carbon coated carbon fiber were determined by the Si/C *** a result,the Si/C ratio exerted significant effects on the crack deflection behavior and the mechanical properties of the *** composites with near-stoichiometric SiC matrix showed excellent mechanical properties because of the effective crack deflection and the moderate Young’s modulus of their SiC *** flexural strength,flexural modulus,and compressive strength were 423±27 MPa,33.41±4.52 GPa,and 393±8 MPa,***,after a heat treatment at 1600℃,the role of carbon fiber toughening was improved and accompanied by a decrease in mechanical properties for all composites,which was attributed to the increased defects in SiC matrix and the damaged interfaces by the thermal residual stress.

关键词： SiC precursor Si/C ratio polymethysilane C/C–SiC composites mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Uniform lithium deposition induced by copper phthalocyanine additive for durable lithium anode in lithium-sulfur batteries

引用

Chinese Chemical Letters 2024年第5期35卷 447-452页

作者： Ting Hu Yuxuan Guo Yixuan Meng ze zhang Ji Yu Jianxin Cai Zhenyu Yang Key Laboratory of Jiangxi Province for Environment and Energy Catalysis School of Chemistry and Chemical EngineeringNanchang UniversityNanchang 330031China

Copper phthalocyanine(CuPc)is adopted as an electrolyte additive to stabilize lithium anode for lithiumsulfur(Li-S)*** with a planar molecular structure and lithiophilic N-containing group,is likely to be adsorbed on the surface of Li anode to form a coating layer,which can restrict the direct contact between Li anode and solvents,and guide the uniform deposition of Li^(+)*** Li||Li symmetric cells demonstrate a stable cycle performance,and Li||Cu cells show high Coulombic *** Li-S batteries,the formed stable solid-electrolyte interface(SEI)film containing copper sulfides can protect Li anode from the polysulfide corrosion and side reactions with the electrolyte,leading to the compact and smooth surface morphology of Li ***,the Li-S batteries with CuPc additive deliver much higher capacity,better cycle performance and rate capability as compared to the one without CuPc additive.

关键词： Copper phthalocyanine Electrolyte additive Stable SEI film Stabilized Li anode Lithium-sulfur batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nano-flower spherical SnS2 combined with a special lithium storage mechanism as a multifunctional separator for lithium-sulfur batteries contributes to ultra-high initial discharge specific capacity

引用

Science China(Technological Sciences) 2024年第2期67卷 509-519页

作者： LIU HuaZhong XIONG YaPing HUANG MouZhi CHEN ZongMin YANG Xiao zhang ze YANG ZhenYu CAI JianXin School of Chemistry&Chemical Engineering Nanchang UniversityNanchang 330031China

The critical factors that limit the electrochemical performance of lithium-sulfur(Li-S)batteries are mainly the“shuttle effect”of polysulfides and the slow redox reaction between lithium polysulfides(LiPSs).Herein,a nano-sphere-type material selfassembled from tin disulfide nanosheets is designed and applied to the Li-S cell separator in this *** SnS_(2)@PP modified separator not only acts as a dual restriction for LiPSs by chemisorption and physical *** the same time,it improves the catalytic activity of the redox reaction between *** SnS_(2)has extremely high electrochemical ***,a portion of the lithium ions can be inserted into SnS_(2)to form Li_(x)SnS_(2)and contribute to the capacity during the first discharge of the *** addition,Li_(x)SnS_(2)possesses a high degree of stability,and it does not undergo further de-alloying reactions even at the high potential of the Li-S *** benefit is that the steady-state Li_(x)SnS_(2)acts as a lithium-containing *** can form special Li^(+)channels on the surface of the separator,thus greatly improving the efficiency of Li+*** results showed that the SnS_(2)@PP-based cell exhibited extremely high initial discharge specific capacity(1477 m Ah g^(-1)at 0.1 C)and excellent rate performance(631 m Ah g^(-1)at 5 C).Even after 1000 cycles at 2 C,the cell exhibited a low decay rate of 0.06%per cycle on *** addition,the superior electrochemical performance was obtained even with a high sulfur loading of 5.1 mg cm^(-2)and low electrolyte of E/S=8μL mg^(-1).

关键词： Li-S batteries modified separators polysulfides catalytic conversion high electrochemical activity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Evaluating the thermal environment of urban land surfaces in Yakutsk,a city located in a region of continuous permafrost

引用

Advances in Climate Change Research 2024年第1期15卷 113-123页

作者： Xiang-Long LI ze zhang Jin-Xin LU Anatoli BROUCHKOV Qing-Kai YAN Qi-Hao YU Sheng-Rong zhang Andrey MELNIKOV School of Civil Engineering and Transportation Institute of Cold Regions Science and EngineeringPermafrost InstituteNortheast Forestry UniversityHarbin150040China China Railway Qinghai-Tibet Group Company Xining 810000China Department of Geocryology Faculty of GeologyLomonosov Moscow State UniversityMoscow 119234Russian Federation State Key Laboratory of Frozen Soil Engineering Northwest Institute of Eco Envi ronment and Re sourcesChinese Academy of SciencesLanzhou 730000China Melnikov Permafrost Institute Siberian BranchRussian Academy of ScienceYakutsk 677010Russian Federation

Rapid urbanization has led to changes in the urban land surface thermal ***,there are still much unknown about the urban land surface thermal conditions in permafrost *** is a unique geological environment,changes in the urban land surface thermal environment may trigger geological disasters caused by permafrost *** study utilized remote sensing data and geographic de-tectors to identify the dynamic changes in land surface temperature(LST)and land use/land cover(LU/LC)in Yakutsk,as well as the potential factors contributing to LST *** 1992 and 2020,the built-up area in Yakutsk increased by 36%,and the annual average LST in Yakutsk has risen by 6.67℃,accompanied by an expansion of high-temperature *** ongoing greening efforts,rapid urbanization poses a threat to these green *** in the normalized difference built-up index(NDBI)and land use transfer(LDT)were identified as the primary drivers of urban LST *** integrating geographic detector technology and artificial neural network models,we optimized the selection of input factors in the prediction model and used it to explore the future changes in LST in *** average LST in Yakutsk is expected to reach 23.4℃ and 25.1℃ in 2030 and 2040,respectively,with a further increase in high-temperature *** study provides a reference for ecological,hydrological,and geological assessments of cities in permafrost regions.

关键词： Remote sensing Land surface temperature Land use/Land cover Permafrost Yakutsk

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Graphene photodetectors integrated with silicon and perovskite quantum dots

引用

Microsystems & Nanoengineering 2024年第3期10卷 21-33页

作者： Kashif Abbas Peirui Ji Naveed Ullah Shareen Shafique ze zhang Muhammad Faizan Ameer Shenghan Qin Shuming Yang State Key Laboratory for Manufacturing Systems Engineering Xi’an Jiaotong UniversityXi’an 710049China Department of Microelectronic Science and Engineering Laboratory of Clean Energy Storage and ConversionSchool of Physical Science and TechnologyNingbo Collaborative Innovation Center of Nonlinear Calamity System of Ocean and AtmosphereNingbo UniversityNingbo 315211China

Photodetectors(PDs)play a crucial role in imaging,sensing,communication systems,***(Gr),a leading two-dimensional material,has demonstrated significant potential for photodetection in recent ***,its relatively weak interaction with light poses challenges for practical *** integration of silicon(Si)and perovskite quantum dots(PQDs)has opened new avenues for Gr in the realm of next-generation *** review provides a comprehensive investigation of Gr/Si Schottky junction PDs and Gr/PQD hybrid PDs as well as their *** operating principles,design,fabrication,optimization strategies,and typical applications of these devices are studied and *** these discussions,we aim to illuminate the current challenges and offer insights into future directions in this rapidly evolving field.

关键词： quantum discussions summarized

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：