检索结果-南通市图书馆

Chinese Journal of Chemical Engineering 2024年第6期70卷 269-279页

作者： Shuyi Shen Song guo Sining Chen Jinhua zhao Nanjing University of Science&Technology Nanjing 210094China China Academy of Safety Science and Technology Beijing 100012China

Recently,azobenzene-4,4'-dicarboxylic acid(ADCA)has been produced gradually for use as an organic synthesis or pharmaceutical intermediate due to its eminent *** large quantities put into application in the future,the thermal stability of this substance during storage,transportation,and use will become quite ***,in this work,the thermal decomposition behavior,thermal decomposition kinetics,and thermal hazard of ADCA were *** were conducted by using a SENSYS evo DSC device.A combination of differential iso-conversion method,compensation parameter method,and nonlinear fitting evaluation were also used to analyze thermal kinetics and mechanism of ADCA *** results show that when conversion rate α increases,the activation energies of ADCA's first and main decomposition peaks *** amount of heat released during decomposition varies between 182.46 and 231.16 J·g^(-1).The proposed kinetic equation is based on the Avrami-Erofeev model,which is consistent with the decomposition *** the Frank-Kamenetskii model,a calculated self-accelerating decomposition temperature of 287.0℃is obtained.

关键词： Azobenzene-4,4′-dicarboxylic acid Thermal decomposition behavior Kinetic mechanism Thermal hazard evaluation Compensation parameter effect

Macro Meso Response and Stress Wave Propagation Characteristics of MCT High-Voltage Switch Under Shock load

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 317-335页

作者： Yuyang guo Chuang Chen Ruizhi Wang Enling Tang Key Laboratory of Transient Physical Mechanics and Energy Conversion Materials of Liaoning Province Shenyang Ligong UniversityShenyang110159LiaoningChina

In order to study the dynamic and electrical coupling response characteristics of Metal Oxide Semiconductor Controlled Thyristor(MCT)high-voltage switch under the synergic action of mechanical load and high voltage,the separated Hopkinson pressure bar(SHPB)test system was used to simulate different impact load environments,and combined with the multi-layer high-voltage ceramic capacitor charging and discharging system,the instantaneous electrical signals of MCT high-voltage switch were *** with numerical simulation and theoretical analysis,the failure mode and stress wave propagation characteristics of MCT high voltage switch were *** mechanical and electrical coupling response characteristics and failure mechanism of MCT high voltage switch under dynamic load were revealed from macroscopic and microscopic *** results show that the damage modes of MCT high-voltage switches can be divided into non-functional damage,recoverable functional damage,non-recoverable damage and structural *** to the gap between the metal gate and the oxide layer,the insulating oxide layer was *** placing for a period of time,the elastic deformation of the metal gate partially recovered and the accumulated charge disappeared,which induced the recoverable functional damage failure of the *** addition,obvious cracks appeared on both sides of the monocrystalline silicon inside the MCT high-voltage switch,leading to unrecoverable damage of the device.

关键词： MCT Impact load Failure analysis Stress wave Numerical simulation

Recent progress on copper catalysts with different surface states for CO_(2)electroreduction

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 10-27,I0001页

作者： Wenjun zhang Yang Yang Donggang guo Lu Liu Tianjin Key Laboratory of Environmental Remediation and Pollution Control College of Environmental Science and EngineeringNankai UniversityTianjin 300350China Shanxi Laboratory for Yellow River College of Environment and ResourceShanxi UniversityTaiyuan 030006ShanxiChina

The electrochemical carbon dioxide reduction reaction(eCO_(2)RR),which converts CO_(2)into various hydrocarbons or alcohols,has been extensively researched because it promises a sustainable energy ***,only copper(Cu)can currently achieve stable and efficient hydrocarbon conversion in the eCO_(2)***,understanding the catalytic mechanisms and summarizing the research progress on synthesis strategies of Cu catalysts are essential for the eCO_(2)*** paper reviews Cu catalysts with different surface states of Cu catalysts:oxide-derived Cu,Cu nanoparticles,Cu single atoms,and Cu *** then reviews the development and progress of different Cu-catalyst preparation methods in recent years,focusing on the activity and selectivity of *** revealing the tendencies of catalytic selection and deep reactive mechanisms of Cu catalysts with four different surface states,this review can guide the subsequent construction of catalysts and provides an understanding of catalytic mechanisms.

关键词： eCO_(2)RR Oxide-derived Cu Cu nanoparticles Cu single atoms Cu nanoclusters

Influence of bolt dynamic installation on topography characteristics and mechanical behaviors of CFRP interference-fit bolted joints

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 482-500页

作者： Xiaohe WANG Zengqiang CAO Yuehaoxuan WANG Yingjiang guo School of Mechanical Engineering Northwestern Polytechnical UniversityXi’an 710072China NPU Xuhang Electromagnetic Technology Co. Ltd.Xi’an 710100China

As the controlled research of Dynamic Installation(DI)and Static Installation(SI),a new interference installation method was developed based on electromagnetic loading to enhance the mechanical properties of composite *** different interference-fit sizes were considered,ranging from a net fit to 2.0%.The experiments were conducted to evaluate the installation resistance and the mechanical behavior of the joint under external ***,an FFA model to model the stress distribution and damage behavior of the bolt-hole contact interface was *** load-displacement curve and damage modes of experiments were used to verify the FEA *** results show that the installation resistance during DI process was remarkably lower than that of SI process corresponding to all interference-fit sizes,and the stress amplitudes induced by interference were larger and widely *** damage of the hole wall was positively correlated with interference fit size,but DI can significantly reduce the damage compared to *** performance tests,DI enhanced the static bearing capacity and extended longer fatigue life of the joints than *** methods can be an effective way to achieve highly reliable interference joints in composite structures.

关键词： Carbon Fiber-Reinforced Polymer(CFRP) Bolted joints Interference-fit Electromagnetic installation Finite Element Analysis(FEA) Damage mechanics Bearing behavior

Resonance mechanism of flapping wing based on fluid structure interaction simulation

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第5期37卷 243-262页

作者： Yueyang guo Wenqing YANG Yuanbo DONG Dong XUE National Key Laboratory of Science and Technology on Aerodynamic Design and Research School of AeronauticsNorthwestern Polytechnical UniversityXi'an 710072China Research&Development Institute of Northwestern Polytechnical University in Shenzhen Shenzhen 518063China Yangtze River Delta Research Institute of Northwestern Polytechnical University Taicang 215400China

Certain insect species have been observed to exploit the resonance mechanism of their *** order to achieve resonance and optimize aerodynamic performance,the conventional approach is to set the flapping frequency of flexible wings based on the Traditional Structural Modal(TSM)***,there exists controversy among researchers regarding the relationship between frequency and aerodynamic *** that the structural response of wings can be influenced by the surrounding air vibrations,an analysis known as Acoustic Structure Interaction Modal(ASIM)is introduced to calculate the resonant *** this study,Fluid Structure Interaction(FSI)simulations are employed to investigate the aerodynamic performance of flapping wings at modal frequencies derived from both TSM and ASIM *** performance is evaluated for various mass ratios and frequency ratios,and the findings indicate that the deformation and changes in vortex structure exhibit similarities at mass ratios that yield the highest aerodynamic ***,the flapping frequency associated with the maximum time-averaged vertical force coefficient at each mass ratio closely aligns with the ASIM frequency,as does the frequency corresponding to maximum ***,the ASIM analysis can provide an effective means for predicting the optimal flapping frequency for flexible ***,it enables the prediction that flexible wings with varying mass ratios will exhibit similar deformation and vortex structure *** paper offers a fresh perspective on the ongoing debate concerning the resonance mechanism of Flexible Flapping Wings(FFWs)and proposes an effective methodology for predicting their aerodynamic performance.

关键词： Flexible Flapping Wing(FFW) Acoustic Structure Interaction Modal(ASIM) Fluid Structure Interaction(FSI) Resonance mechanism Aerodynamic performance

Numerical study of the influence of the atmospheric pressure on the thermal environment in the passenger cabin

在线全文

学校读者我要写书评

暂无评论

Building Simulation 2024年第2期17卷 253-265页

作者： Xin Su Yu guo zhengwei Long Yi Cao Tianjin Key Lab.of Indoor Air Environmental Quality Control School of Environmental Science and EngineeringTianjin UniversityTianjin300072China Shanghai Aircraft Design and Research Institute Jinke RoadPudong DistrictShanghai201210China

The cabin air pressure remains lower than the horizontal atmospheric pressure when the airplane is in *** pressure is one of the parameters that must be taken into consideration while studying the thermal environment of an airplane *** are still no reference values for aircraft cabins despite the fact that numerous studies on low pressure heat transfer have demonstrated the connection between convective heat transfer coefficient(CHTC)and air *** this paper,a correction method for CHTC under low pressure conditions was established by using the dummy heat dissipation in the low-pressure cabin *** this basis,a thermal environment simulation model was developed,then was applied to the simulation of a seven-row aircraft cabin containing 42 passengers,and the CHTC and heat loss of dummy surface in the cabin were ***,the results of PMV calculated by using heat dissipation and air parameters at sampling points were *** results show that the modified CHTC can accurately reflect the cabin thermal environment under low pressure conditions,and the correction of CHTC can be realized by adjusting the turbulent Prandtl number,which is nonlinear correlated with the *** simulation results of the thermal environment in the seven-row cabin show that the CHTC changes by about 42%before and after *** air pressure decreases during take-off,which reduces the average CHTC of the crew surface from 5.09 W/(m^(2)·K)to 4.56 W/(m^(2)·K),but the air temperature rises by about 0.2°C as a *** deviation of PMV results calculated by using simulated heat loss data and using air parameters of measuring points in space is up to 0.5,but the latter is representative for calculating the thermal comfort level of the whole cabin.

关键词： low pressure aircraft cabin simulation heat dissipation convective heat transfer coefficient

A molecular insight into coke formation process of vacuum residue in thermal cracking reaction

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 2130-2138页

作者： Ji-Guang Li Xin guo Huan-Di Hou Heavy Oil Processing Department Sinopec Research Institute of Petroleum Processing Co.LtdBeijing100083China

Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with various reaction time were performed to evaluate the coke formation *** total yields of ideal components including naphtha,atmospheric gas oil(AGO)and vacuum gas oil(VGO)of thermal cracking reactions increased from 10.89%to 40.81%,and the conversion ratios increased from8.05%to 43.33%with increasing the reaction time from 10 to 70 *** asphaltene content increased from 12.14%to a maximum of 22.39%and then decreased,and this maximum of asphaltene content occurred at the end of the coking induction *** asphaltenes during the coking induction period,at the end and after coking induction period of those tested thermal cracking reactions were characterized to disclose the structure changing rules for coke formation process,and the coke formation pathways were discussed to reveal the coke formation process at molecular level.

关键词： Vacuum residue Thermal cracking Asphaltene Coking induction period Sulfur Nitrogen

Exploring the potential of olivine-containing copper-nickel slag for carbon dioxide mineralization in cementitious materials

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第3期31卷 562-573页

作者： Qianqian Wang Zequn Yao Lijie guo Xiaodong Shen College of Materials Science and Engineering Nanjing Tech UniversityNanjing 211816China State Key Laboratory of Materials-Oriented Chemical Engineering Nanjing 211816China BGRIMM Technology Group Beijing 100160China

Water-quenched copper-nickel metallurgical slag enriched with olivine minerals exhibits promising potential for the production of CO_(2)-mineralized cementitious *** this work,copper-nickel slag-based cementitious material(CNCM)was synthesized by using different chemical activation methods to enhance its hydration reactivity and CO_(2) mineralization *** water curing ages and carbonation conditions were explored related to their carbonation and mechanical properties ***,thermogravimetry differential scanning calorimetry and X-ray diffraction methods were applied to evaluate the CO_(2) adsorption amount and carbonation products of *** development of carbonated CNCM blocks was examined by backscattered electron imaging(BSE)with energy-dispersive X-ray *** showed that among the studied samples,the CNCM sample that was subjected to water curing for 3 d exhibited the highest CO_(2) sequestration amount of 8.51wt%at 80℃and 72 h while presenting the compressive strength of 39.07 *** result indicated that 1 t of this CNCM can sequester 85.1 kg of CO_(2) and exhibit high compressive *** the addition of citric acid did not improve strength development,it was beneficial to increase the CO_(2) diffusion and adsorption amount under the same carbonation conditions from BSE *** work provides guidance for synthesizing CO_(2)-mineralized cementitious materials using large amounts of metallurgical slags containing olivine minerals.

关键词： copper-nickel slag fayalite CO_(2)sequestration cementitious material admixtures carbonation conditions

Solid-state lithium-ion batteries for grid energy storage:opportunities and challenges

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第1期67卷 43-66页

作者： Xin Chang Yu-Ming zhao Boheng Yuan Min Fan Qinghai Meng Yu-guo guo Li-Jun Wan CAS Key Laboratory of Molecular Nanostructure and Nanotechnology CAS Research/Education Center for Excellence in Molecular SciencesBeijing National Laboratory for Molecular Sciences(BNLMS)Institute of ChemistryChinese Academy of Sciences(CAS)Beijing 100190China University of Chinese Academy of Sciences Beijing 100049China

The energy crisis and environmental pollution drive more attention to the development and utilization of renewable *** the capricious nature of renewable energy resource,it has difficulty supplying electricity directly to consumers stably and efficiently,which calls for energy storage systems to collect energy and release electricity at peak *** to their flexible power and energy,quick response,and high energy conversion efficiency,lithium-ion batteries stand out among multiple energy storage technologies and are rapidly deployed in the *** superior performance and ensuring the safety of energy storage systems,intrinsically safe solid-state electrolytes are expected as an ideal alternative to liquid *** this review,we systematically evaluate the priorities and issues of traditional lithium-ion batteries in grid energy *** lithium-ion batteries containing liquid electrolytes,solid-state lithium-ion batteries have the potential to play a more significant role in grid energy *** challenges of developing solid-state lithium-ion batteries,such as low ionic conductivity of the electrolyte,unstable electrode/electrolyte interface,and complicated fabrication process,are discussed in ***,the safety of solid-state lithium-ion batteries is *** the obtained insights,inspiring prospects for solid-state lithium-ion batteries in grid energy storage are depicted.

关键词： lithium-ion batteries grid energy storage solid-state electrolytes interface stability

One dimensional CeO_(2) nanorods/poly(ethylene oxide) solid composite electrolyte for all-solid-state lithium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 570-577,I0005页

作者： Yudi guo Erqing zhao Xiaofang zhao Shuailei Liu School of Chemistry and Materials Engineering Xinxiang UniversityXinxiang453003China School of Chemistry and Chemical Engineering Henan Institute of Science and TechnologyXinxiang453003China

The research of poly(ethylene oxide)(PEO)-based solid composite electrolyte with high ionic conductivity and excellent interfacial stability is the key to the development of all-solid-state lithium-ion batteries(ASSLIBs). Herein, uniform nanorod structured CeO_(2) fillers were controllably synthesized by electrospinning, which were subsequently filled into PEO polymer to prepare CeO_(2)/PEO solid composite electrolyte. The addition of CeO_(2) nanorods can reduce both the glass transition temperature and the melting point of PEO polymer, and also interact with PEO and lithium bis(trifluoromethanesulphonyl)imide(LITFSI) by Lewis acid—base reaction. Therefore, the solid composite electrolyte exhibits a high ionic conductivity of 4.52 × 10^(-4)S/cm, a wide electrochemical stability window of about 4.8 V, and a good interfacial stability with Li at 55℃. Moreover, the LiFePO_4/Li ASSLIB divulges the discharging specific capacity of 165, 162, 156 and 146 mA,h/g at 0.2, 0.5, 1 and 2 C, respectively, and achieves the capacity retention of 90.3% after 150 cycles at 0.5 C. Consequently, one dimensional CeO_(2) nanorods can be considered as an alternative filler for polymeric solid electrolyte.

关键词： Poly(ethylene oxide) Solid composite electrolyte CeO_(2)nanorods Ionic conductivity Rare earths