检索结果-南通市图书馆

Design and development of radio frequency output window for circular electron–positron collider klystron

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2018年第11期27卷 620-625页

作者： Zhijun Lu Shigeki Fukuda zusheng zhou Shilun Pei Shengchang Wang Ouzheng Xiao UnNisa Zaib Bowen Bai Guoxi Pei Dong Dong Ningchuang zhou Shaozhe Wang Yunlong Chi Institute of High Energy Physics Chinese Academy of Sciences Beijing 100049 China University of Chinese Academy of Sciences Beijing 100049 China Key Laboratory of Particle Acceleration Physics and Technology Institute of High Energy Physics Chinese Academy of Sciences Beijing 100049 China High Energy Accelerator Research Organization KEK Oho Ibaraki 305-0801 Japan GLVAC Industrial Technology Research Institute of High Power Devices Kunshan 215300 China

This paper presents the first phase of design, analysis, and simulation for the klystron coaxial radio frequency（RF）output window. This study is motivated by 800 kW continuous wave（CW）, 650 MHz klystrons for the future plan of circular electron–positron collider（CEPC） project. The RF window which is used in the klystron output section has a function to separate the klystron from the inner vacuum side to the outside, and high RF power propagates through the window with small power dissipation. Therefore, the window is a key component for the high power klystron. However, it is vulnerable to the high thermal stress and multipacting, so this paper presents the window design and analysis for these problems. The microwave design has been performed by using the computer simulation technology（CST） microwave studio and the return loss of the window has been established to be less than-90 d B. The multipacting simulation of the window has been carried out using MultiPac and CST particles studio. Through the multipacting analysis, it is shown that with thin coating of TiN, the multipacting effect has been suppressed effectively on the ceramic surface. The thermal analysis is carried out using ANSYS code and the temperature of alumina ceramic is lower than 310 K with water *** design result successfully meets the requirement of the CEPC 650 MHz klystron. The manufacturing and high power test plan are also described in this paper.

关键词： klystron coaxial radio frequency window thermal stress multipacting

Electron Beam Guns for High Energy Electron Accelerators: An Overview

在线全文

学校读者我要写书评

暂无评论

Journal of Modern Physics 2013年第11期4卷 1536-1539页

作者： Munawar Iqbal Ghalib Ul Islam Muhammad Ayub Faridi zusheng zhou 1Centre for High Energy Physics University of the Punjab Lahore Pakistan 2Institute of High Energy Physics Chinese Academy of Sciences Beijing China Centre for High Energy Physics University of the Punjab Lahore Pakistan Institute of High Energy Physics Chinese Academy of Sciences Beijing China

Thermionic electron beam is a fundamental part of all types of linear accelerators around the world in the field of Experimental High Energy Physics. Thermionic beam is very inexpensive and simple to produce. In this work, we give an overview of generation, design and applications of the electron beam with particular reference to e-beam generation at high energy linear accelerators. Experimental data are presented in tabular form for ready reference. We also make an evaluation of these high energy sources with our in-house designed e-beam gun. Finally, a comparison has been presented in terms of characteristic parameters of all these high performance sources.

关键词： E-Beam Guns LINAC Emittance Beam Current

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

ADS注入器Ⅰ高频四极场功率源系统研制

强激光与粒子束 2015年第8期27卷 256-260页

作者：周祖圣何大勇刘熔池云龙中国科学院高能物理研究所、粒子加速物理与技术重点实验室北京100049

ADS注入器Ⅰ高频四极场(RFQ)功率源系统将为325MHz RFQ提供连续波功率,使束流离开RFQ时,其能量达到几MeV。功率源系统除了补偿RFQ腔耗外,还必须提供足够的功率以保证RFQ中的加速电场。ADS注入器ⅠRFQ功率源系统主要包括600kW连续波速调... 详细信息

ADS注入器Ⅰ高频四极场(RFQ)功率源系统将为325MHz RFQ提供连续波功率,使束流离开RFQ时,其能量达到几MeV。功率源系统除了补偿RFQ腔耗外,还必须提供足够的功率以保证RFQ中的加速电场。ADS注入器ⅠRFQ功率源系统主要包括600kW连续波速调管、80kV/18A基于脉冲步进调制技术的PSM电源、环流器以及相应的波导传输系统等。根据ADS总体指标和RFQ的相关技术参数,提出了功率源的总体布局、技术指标以及设计要求等,在此基础上完成系统安装与调试,并通过专家组测试与验收。

关键词： ADS 注入器 RFQ功率源

在线全文

学校读者我要写书评

暂无评论

高功率高效率速调管输出耦合器的优化与设计

强激光与粒子束 2024年第10期36卷 18-23页

作者：陆志军周祖圣肖欧正李晓中国科学院高能物理研究所北京100049 中国科学院高能物理研究所东莞研究部广东东莞523803

输出耦合器作为速调管关键部件,其性能直接关系到速调管的整体表现。然而,耦合器故障却是速调管及多种真空电子设备中最为常见的问题之一,特别是在高连续波功率运行场景下,这一问题更为突出。针对连续波650 MHz/800 kW高效率速调管,对... 详细信息

输出耦合器作为速调管关键部件,其性能直接关系到速调管的整体表现。然而,耦合器故障却是速调管及多种真空电子设备中最为常见的问题之一,特别是在高连续波功率运行场景下,这一问题更为突出。针对连续波650 MHz/800 kW高效率速调管,对输出耦合器进行优化设计,并在单注和多注速调管耦合器测试方面取得了重要突破:单注速调管输出耦合器在连续波模式下的测试功率已达到690 kW以上,为了进一步增加功率容量,采用T-bar结构过渡,并对耦合器进行优化设计,使陶瓷附近电场分布更均匀;而多注速调管矩形波导窗输出耦合器最高测试功率达到全驻波115 kW。此外,通过对耦合器的结构、材料以及散热方式进行分析与优化,积极探索提升耦合器功率容量的多种可能途径,进一步增强了速调管的稳定性和可靠性。

关键词：速调管输出耦合器高功率测试 T-bar 矩形窗

在线全文

学校读者我要写书评

暂无评论

新型金属丝靶电子源实验研究

强激光与粒子束 2021年第9期33卷 113-118页

作者：殷佳鹏远晓辉周祖圣裴国玺刘圣广上海交通大学物理与天文学院协同创新中心激光等离子体教育部重点实验室上海200240 中国科学院高能物理研究所北京100080 中国科学院大学北京100049

电子束在基础科学研究、工农业生产和医疗领域发挥了重要作用。提出了一种新型的电子源技术方案:高功率激光脉冲轰击金属丝靶,可以产生大量能量在百keV量级的热电子,一部分热电子在丝靶表面自生电磁场的作用下沿着丝靶运动,丝靶后方可... 详细信息

电子束在基础科学研究、工农业生产和医疗领域发挥了重要作用。提出了一种新型的电子源技术方案:高功率激光脉冲轰击金属丝靶,可以产生大量能量在百keV量级的热电子,一部分热电子在丝靶表面自生电磁场的作用下沿着丝靶运动,丝靶后方可以获得指向性良好的电子束。实验上成功在金、钨和铜丝靶后方获得了电子束团,测量了束团束斑、电荷量和能谱。铜丝靶单发实验收集到的电子束团总电荷量可达3 nC,能量分布在0~240 keV区间内,能谱在100 keV附近呈现峰值。提出了微波压缩方案,设计了2腔微波聚束腔,利用ASTRA对微波腔压缩过程进行了模拟计算。结果显示,可以将电荷量1 nC、长度55 ps的束团压缩至27 ps,满足后续微波加速器对电子源的要求。

关键词：电子束激光脉冲金属丝束团压缩

S波段6 MeV边耦合电子直线加速器的设计研究（英文）

在线全文

学校读者我要写书评

暂无评论

强激光与粒子束 2017年第4期29卷 104-110页

作者：裴士伦赵世琦李小平周祖圣赵建兵池云龙中国科学院高能物理研究所粒子加速物理与技术重点实验室北京100049 中国科学院大学北京100049

近年来,对紧凑、稳定及可靠型电子直线加速器的需求越来越多,其能量主要分布在几百keV到十几个MeV的范围内,其中需求最多的则是能量在MeV量级的微波电子直线加速器。在这种形势下,中国科学院高能物理研究所正在研制一台S波段6 MeV的边... 详细信息

近年来,对紧凑、稳定及可靠型电子直线加速器的需求越来越多,其能量主要分布在几百keV到十几个MeV的范围内,其中需求最多的则是能量在MeV量级的微波电子直线加速器。在这种形势下,中国科学院高能物理研究所正在研制一台S波段6 MeV的边耦合电子直线加速器,本文对基于该加速器的模拟计算研究进行了介绍。EGUN和HFSS分别用来设计电子枪和边耦合加速结构。通过将EGUN计算得到的电子束流参数和HFSS计算得到的三维电磁场分布数据引入到PARMELA中,完成了对该加速器的多粒子动力学研究。模拟结果显示,所设计的加速器完全能够满足设计指标的要求。最终,在考虑束流负载效应的因素后,完成了边耦合加速结构的微波结构设计。

关键词：多粒子束流动力学边耦合电子直线加速器 EGUN PARMELA HFSS POISSON SUPERFISH

Nanostructured ZnO/BiVO_(4)I-scheme heterojunctions for piezocatalytic degradation of organic dyes via harvesting ultrasonic vibration energy

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 488-497页

作者： Yiling Li Xiaoyao Yu Yingjie zhou Yao Lin Ying Wu Key Laboratory of the Ministry of Education for Advanced Catalysis Materials College of Chemistry and Materials ScienceZhejiang Normal UniversityJinhua 321004China

BiVO_(4)porous spheres modified by ZnO were designed and synthesized using a facile two-step *** resulting ZnO/BiVO_(4)composite catalysts have shown remarkable efficiency as piezoelectric catalysts for degrading Rhodamine B(RhB)unde mechanical vibrations,they exhibit superior activity compared to pure *** 40wt%ZnO/BiVO_(4)heterojunction composite displayed the highest activity,along with good stability and *** enhanced piezoelectric catalytic activity can be attributed to the form ation of an I-scheme heterojunction structure,which can effectively inhibit the electron-hole ***,hole(h+)and superoxide radical(·O_(2)^(-))are proved to be the primary active ***,ZnO/BiVO_(4)stands as an efficient and stable piezoelectric catalyst with broad potential application in the field of environmental water pollution treatment.

关键词： piezoelectric catalytic heterojunction dye degradation ultrasonic vibration

Interfacial Zn2+-solvation regulator towards reversible and stable Zn anode

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 684-692页

作者： Miao zhou Xiongbin Luo Hang Li Shan Guo Zhuang Tong Xiaotao zhou Xu Li Zhaohui Hou Shuquan Liang Guozhao Fang College of Mechanical Engineering Key Laboratory of Hunan Province for Advanced Carbon-based Functional Materials Hunan Institute of Science and Technology School of Materials Science and Engineering Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Province Central South University College of Materials and Metallurgy Guizhou University National Energy Metal Resources and New Materials Key Laboratory Central South University

Aqueous zinc-ion batteries （AZIBs） are fundamentally challenged by the instability of the electrode/electrolyte interface,predominantly due to irreversible zinc （Zn） deposition and hydrogen ***,the intricate mechanisms behind the electrochemical discrepancies induced by interfacial Zn2+-solvation and deposition behavior demand comprehensive *** molecules endowed with special functional groups （such as hydroxyl,carboxyl,etc.） have the potential to significantly optimize the solvation structure of Zn2+and regulate the interfacial electric double layer （EDL）.By increasing nucleation overpotential and decreasing interfacial free energy,these functional groups facilitate a lower critical nucleation radius,thereby forming an asymptotic nucleation model to promote uniform Zn ***,this study presents a pioneering approach by introducing trace amounts of n-butanol as solvation regulators to engineer the homogenized Zn （H-Zn） anode with a uniform and dense *** interfacial reaction and structure evolution are explored by in/ex-situ experimental techniques,indicating that the H-Zn anode exhibits dendrite-free growth,no by-products,and weak hydrogen evolution,in sharp contrast to the bare ***,the H-Zn anode achieves a remarkable Zn utilization rate of approximately 20% and simultaneously sustains a prolonged cycle life exceeding 500 ***,the H-Zn//NH4V4O10（NVO） full battery showcases exceptional cycle stability,retaining 95.04%capacity retention after 400 cycles at a large current density of 5 A *** study enlightens solvation-regulated additives to develop Zn anode with superior utilization efficiency and extended operational lifespan.

关键词： Aqueous zinc-ion batteries Interfacial reaction Asymptotic nucleation model Reversible and stable Zn anode

A low redox potential and long life organic anode material for sodium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 557-564页

作者： Zhi Li Yang Wei Kang zhou Xin Huang Xing zhou Jie Xu Taoyi Kong Junwei Lucas Bao Xiaoli Dong Yonggang Wang Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New Energy Collaborative Innovation Center of Chemistry for Energy Materials (iChEM) Fudan University Department of Chemistry Boston College School of Materials Science and Engineering Anhui University of Technology

Sodium-ion batteries （SIBs） with organic electrodes are an emerging research direction due to the sustainability of organic materials based on elements like C,H,O,and sodium ***,organic electrode materials for SIBs are mainly used as cathodes because of their relatively high redox potentials（>1 V）.Organic electrodes with low redox potential that can be used as anode are ***,a novel organic anode material （tetrasodium 1,4,5,8-naphthalenetetracarboxylate,Na4TDC） has been developed with low redox potential （<0.7 V） and excellent cyclic *** three-sodium storage mechanism was demonstrated with various in-situ/ex-situ spectroscopy and theoretical calculations,showing a high capacity of 208 mAh/g and an average decay rate of merely 0.022%per ***,the Na4TDC-hard carbon composite can further acquire improved capacity and cycling stability for 1200 cycles even with a high mass loading of up to 20 mg *** pairing with a thick Na3V2（PO4）3cathode (20.6 mg cm-2),the as-fabricated full cell exhibited high operating voltage （2.8 V）,excellent rate performance and cycling stability with a high capacity retention of 88.7% after 200 cycles,well highlighting the Na4TDC anode material for SIBs.

关键词： Organic anode material Low redox potential Composite anode Sodium-ion batteries