检索结果-南通市图书馆

Transformation of Two VP1 Genes of O-and Asia 1-Type Foot-and-Mouth Disease Virus into Maize

在线全文

学校读者我要写书评

暂无评论

Agricultural Sciences in China 2011年第5期10卷 661-667页

作者： zhang Su-zhi zhang Gui-ling RONG Ting-zhao PAN Li ZHOU Peng zhang yong-guang Maize Research Institute Sichuan Agricultural University Ya ＇an 625014 P.R. China Lanzhou Veterinary Research Institute Chinese Academy of Agricultural Sciences Lanzhou 730046 IER.China

The expression of antigens in transgenic plants has increasingly been used as an alternative to the classical methodologies for the development of experimental *** paper reports here the development of a novel oral immunization system for foot-and-mouth disease （FMD） in transgenic maize with two serotypes of the structural protein VP1 of the foot-and-mouth disease virus （FMDV） viz.,O-and Asia 1-type,*** transgenic plantlets were identified and investigated by polymerase chain reaction （PCR）,Southern blot,and real-time ***,it was found that the VP1 genes in transgenic plants could be transmitted stably to the next generation through PCR *** our knowledge,this is the first report in an attempt to induce a protective systemic antibody response in animals by feeding the transgenic plants in which two serotypes antigen protein of FMDV expressed *** of the experiment provide the possibility of using plant-based vaccines as feedstuff or feedstuff additives.

关键词： FMDV P12A3C gene maize transformation edible vaccine

B cell development and antibody responses in human immune system mice:current status and future perspective

在线全文

学校读者我要写书评

暂无评论

Science China(Life Sciences) 2024年第4期67卷 645-652页

作者： Tao zhang Wentao Liu yong-guang Yang Key Laboratory of Organ Regeneration&Transplantation of the Ministry of Education The First Hospital of Jilin UniversityChangchun 130061China National-Local Joint Engineering Laboratory of Animal Models for Human Diseases Jilin UniversityChangchun 130061China International Center of Future Science Jilin UniversityChangchun 130061China

Humanized immune system(HIS)mice have been developed and used as a small surrogate model to study human immune function under normal or disease *** variations are found between models,most HIS mice show robust human T cell ***,there has been unsuccessful in constructing HIS mice that produce high-affinity human antibodies,primarily due to defects in terminal B cell differentiation,antibody affinity maturation,and development of primary follicles and germinal *** this review,we elaborate on the current knowledge about and previous attempts to improve human B cell development in HIS mice,and propose a potential strategy for constructing HIS mice with improved humoral immunity by transplantation of human follicular dendritic cells(FDCs)to facilitate the development of secondary follicles.

关键词： humanized immune system mouse humoral immunity germinal center B cell follicular dendritic cell

An Evaluation of the Infection Status and Source of Subgroup J Avian Leukosis Virus in Cloned Free-Range Layers

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2013年第4期12卷 687-693页

作者： zhang Pei-pei LIU Shao-qiong WANG Jian WANG Bo ZHAO Cheng-di zhang yong-guang SUN Shu-hong College of Veterinary Medicine Shandong Agricultural University Lanzhou Veterinary Research Institute Chinese Academy of Agricultural Sciences

In recent years, subgroup J avian leukosis virus （ALV-J） has been found to frequently infect layers in China. This virus is responsible for economic losses due to both mortality and decreased performance in chickens. In this study, 45-d-old cloned flee-range layers were suspected to be infected with ALV and other immunosuppressive diseases because their feathers were unkempt and their growth rate was impaired. To estimate the infection status and determine the source of ALV-J in the flock, 30 cloacal swabs were randomly collected to measure the p27 antigen level by enzyme-linked immunosorbent assay （ELISA）. Among the birds that were tested, 87% （26/30） were positive. In addition, 6 anticoagulant blood samples were aseptically collected at random from the flock when the layers were 60 d old. These samples were centrifuged to obtain the leukocytes, which were then used to inoculate chicken embryo fibroblast （CEF） cells for the identification of ALV-J by indirect immunofluorescence （IFA）. Of the samples tested, 100% （6/6） were positive. The flock＇s production performance was also investigated, and 10 layers were necropsied to evaluate pathological changes at 115 d of age. The flock never laid eggs even though they reached the age of the first laying （110 d）. Furthermore, there were pathological changes present, including atrophy of the thymus and bursa of Fabricius, undeveloped ovaries, glandular stomach haemorrhage, and hepatosplenomegaly. Paraffin-embedded sections of intumescent liver and spleen were prepared for antigen localisation using IFA. Positive signals were prevalent in paraffin-embedded sections of the intumescent liver and spleen. Furthermore, provirus DNA was extracted from 4 cloned flee-range layers, and 2 patemal parents （HR native cocks）, and the gp85 gene of ALV-J was amplified by PCR to analyse the genetic variation. The results of the autogenous variation analysis showed that the 6 strains were 98.5-99.7% homologous. This study indicated that there

关键词： cloned free-range layers ALV-J infection status hereditary variation source exploration

Impact wear properties of dissimilar joints between bainitic frogs and pearlite rails

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 275-287页

作者： Pin-yong Zeng Chun-guang Zuo Xiao-yu zhang Wei Li Tribology Research Institute Southwest Jiaotong UniversityChengdu610031SichuanChina

The impact wear behavior and damage mechanism of dissimilar welded joints between U26Mn frog and U75 V rail before and after normalizing treatment were studied by cyclic impact *** experiment indicated that the impact wear volume of the joints increased with the increasing number of impact *** main wear mechanisms include pitting wear,mild fatigue wear,delamination wear,and fatigue wear,and plastic deformation was the primary impact wear *** them,fatigue wear had the greatest influence on wear volume,while other wear mechanisms had limited *** impact wear resistance of the base material was better than that of the heat-affected *** treatment was beneficial to improving the impact wear resistance of welded joints owing to its effect to promote pearlite recovery,grain refinement,and uniform distribution of *** martensite generated in the rail welded joints aggravated the impact wear damage to the materials,which should be avoided.

关键词： Dissimilar welded joint Impact wear Bainitic steel Damage mechanism Wear rate

Complete kinetic model for esterification reaction of lauric acid with glycerol to synthesize glycerol monolaurate

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第6期70卷 211-221页

作者： Han-Qiao Hu Yue zhang Ming Fan yong Cai guang-Wen Chu Liang-Liang zhang Research Center of the Ministry of Education for High Gravity Engineering and Technology Beijing University of Chemical TechnologyBeijing 100029China State Key Laboratory of Organic-Inorganic Composites Beijing University of Chemical TechnologyBeijing 100029China Petrochemical Research Institute China National Petroleum CorporationBeijing 102206China

Glycerol monolaurate(GML)is a widely used industrial chemical with excellent emulsification and antibacterial *** direct esterification of glycerol with lauric acid is the main method to synthesize *** this work,the kinetic process of direct esterification was systematically studied using p-toluenesulfonic acid as catalyst.A complete kinetic model of consecutive esterification reaction has been established,and the kinetic equation of acid catalysis was *** isomerization reactions of GML and glycerol dilaurate were *** was found that the reaction was an equilibrium reaction and the reaction rate was faster than the esterification *** kinetic equations of the consecutive esterification reaction were obtained by experiments as k_(1)=(276+92261Xcat)exp(-37720/RT)and k_(2)=(80+4413Xcat)exp(-32240/RT).The kinetic results are beneficial to the optimization of operating conditions and reactor design in GML production process.

关键词： Glycerol monolaurate p-Toluenesulfonic acid Esterification Kinetics Mass transfer

Orientational growth behavior and mechanism of delta(δ)phase precipitation in cold-rolled Inconel 718 alloy during heat treatment

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 264-274页

作者： Neng-yong Ye guang-liang zhang Tian-yue Huang Ming Cheng Shi-hong zhang Lei Wang School of Materials Science&Engineering Taizhou UniversityTaizhou318000ZhejiangChina Institute of Metal Research Chinese Academy of SciencesShenyang110016LiaoningChina

Due to the important role ofδphase's quantity and morphology in the mechanical and fatigue properties of Inconel 718 alloy and its components,it is necessary to renew insights into the effect of cold deformation on theδphase precipitation,especially on the morphology ***,the nucleation and growth behavior ofδphase in cold-rolled Inconel 718 alloy during aging were *** results show that the precipitation rate and volume fraction ofδphase increase with increasing the cold rolling reduction from 10%to 50%.The volume fraction ofδphase reaches equilibrium after 5 h,remaining at 5.98%,6.52%,and 6.79%under different rolling reductions(10%,30%,and 50%),*** nucleation ofδphase mainly occurs on different sites(grain boundaries,new twin boundaries and old twin boundaries)under 10%rolling reduction,whileδphase mainly nucleates on the new grain boundaries of static recrystallization due to 50%rolling *** the growth ofδphase undergoes a process of alternate orientation growth from spherical(nucleation)→short rod(longitudinal orientation growth)→short rod(radial orientation growth)→dynamic *** 10%rolling reduction,δphase tends to grow into the matrix,while under 50%rolling reduction,the orientation grows faster and is easily affected by the grain boundary curvature.

关键词： Inconel 718 alloy Cold rolling δphase Orientation growth Morphology evolution

Urea-induced interfacial engineering enabling highly reversible aqueous zinc-ion battery

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1599-1609页

作者： Bin-Rui Xu Quan-An Li yong Liu guang-Bin Wang Zi-He zhang Feng-zhang Ren School of Material Science and Engineering Henan University of Science and TechnologyLuoyang471023China School of Information Engineering Henan University of Science and TechnologyLuoyang471023China Longmen Laboratory Luoyang471023China Provincial and Ministerial Co-Construction of Collaborative Innovation Center for Non-Ferrous Metal New Materials and Advanced Processing Technology Luoyang471023China

Aqueous zinc-ion batteries(AZIBs)have been regarded as prospective rechargeable energy storage devices because of the high theoretical capacity and low redox potential of Zn ***,the uncontrollable formation of dendrites and the water-induced side reactions at the Zn/electrolyte interface,and the poor reversibility under a high current density(>2 mA·cm^(-2))and large area capacity(>2 mAh·cm^(-2))still limit the practical applications of ***,a strategy that can overcome these difficulties is urgently ***,we introduce an environmentally friendly and low-cost additive,namely urea,to the electrolyte of AZIBs to induce uniform Zn deposition and suppress the side *** of the adsorption behavior,electrochemical characterization,and observations of the morphology revealed the interfacial modification induced by urea on the Zn/electrolyte interface,demonstrating its huge potential in ***,the long-term cycling stability(over2100 h)of a Zn/Zn symmetric cell under a high current density of 5 mA·cm^(-2)and a capacity of 5 mAh·cm^(-2)was achieved with a 1 mol·L^(-1)ZnSO_(4)electrolyte with the urea ***,the assembled Zn/NH_4V_4O_(10)full cell with urea exhibited excellent cycling performance and an outstanding average Coulombic efficiency of 99.98%.These results indicate that this is a low-cost and effective additive strategy for realizing highly reversible AZIBs.

关键词： Zn anode Urea additive Interface engineering Dendrite growth Side reaction

Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1692-1703页

作者： Xue-jian zhang guang-wei Yang yong Wan yong-hong Wen Chuan-sheng Tang Ming-qi Liu Li-jie Tian Key Laboratory of Metallurgical Emission Reduction and Resources Recycling Anhui University of TechnologyMa'anshan 243002AnhuiChina School of Metallurgical Engineering Anhui University of TechnologyMa'anshan 243002AnhuiChina Baosteel Central Research Institute Baoshan Iron and Steel Co.Ltd.Shanghai 201999China

Metallographic microscopy,scanning electron microscopy and TiN growth thermodynamic and kinetic equations were used to investigate the morphology,quantity,and size of TiN in the center of high-titanium high-strength steels under different solidification cooling *** results showed that TiN in the center of the experimental steels mainly existed in three forms:single,composite(Al2O3-TiN),and multi-particle *** began precipitating at around 1497℃(solidification fraction of 0.74).From the end of melting to solidification for 180 s,the cooling rates in the center of the experimental steels for furnace cooling,air cooling,refractory mold cooling,and cast iron mold cooling tended to stabilize at 0.17,0.93,1.65,and 2.15℃/s,*** size of TiN in the center of the experimental steel cooled using furnace cooling was mainly concentrated in the 5-15 pm *** contrast,the size of TiN in the center of the experimental steels cooled using air cooling,refractory mold cooling,and cast iron mold cooling were mainly concentrated in the 1-5 pm *** addition,their density of TiN in the center of the experimental steels is signif-icantly higher than that of the furnace-cooled experimental *** and kinetic precipitation models of TiN established predicted the growth size of TiN in a high-titanium high-strength steel when the solidification cooling rates are not below 0.93℃/s.

关键词： High-titanium steel Cooling method TiN Thermodynamics Kinetics

Construction of Naphthalenediimide Lanthanide(Ⅲ)-MOFs and Composites Incorporated Electron-Rich Pyrene Derivative as Multifunctional Fluorescence Sensing for Nitro Aromatic Compounds and Aldehydes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemistry 2024年第3期42卷 283-293页

作者： Rong Huo Ting zhang guang Zeng Chen Wang yong Heng Xing Feng Ying Bai College of Chemistry and Chemical Engineering Liaoning Normal UniversityDalianLiaoning116029 China State Key Laboratory of Catalysis Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalianLiaoning116023 China

The development of host-guest MOF luminescent composites has attracted considerable attention. However,it is still a challenge to reasonably design large scale conjugated polycarboxylic acids metal-organic framework (MOF) and modulate donor-acceptor interaction. Herein,a series of isostructural 3D porous lanthanide MOF [Ln_(2)(BINDI)0.5(NO_(3))(DMA)(H_(2)O)]∙DMA∙2.5H_(2)O (Ln = La (1),Ce (2),Pr (3) and Nd (4);H_(4)BINDI (N,N’-bis(5-isophthalic acid)-1,4,5,8-naphthalenediimide) were synthesized. Considering the electron-deficient performances of Ln-BINDI MOFs,D-A type composites Ln-MOFs (1—4@H_(4)TBAPy) were prepared via the incorporation of electron-rich H_(4)TBAPy (1,3,6,8-tetrakis(p-benzoic acid) pyrene),which more improved the luminescence performance of complexes 1—4 and can be used as fluorescence sensors for the detection of nitro compounds and aldehydes. High sensitivity of 1@H_(4)TBAPy towards pNBA,pNA PNP,DNP,and TNP could be achieved through hydrogen bond interactions between MOF and analytes,as well as the π-π interaction between H_(4)TBAPy and the naphthalene ring of BINDI,thus the fluorescence quenching efficiency of 1@H_(4)TBAPy was better than that of the complex 1. In addition,it is found that 1@H_(4)TBAPy has high selectivity and sensitivity to aromatic aldehyde SA,5-Mesal and HMBA. Such strategy to enhance the emission of NDI based Ln-BINDI MOFs,will open up an avenue to obtain more fluorescent MOFs for sensing.

关键词： Ln-MOF Pyrene molecule NACs Aldehydes Fluorescence sensing Carboxylate ligands Charge transfer Donor-acceptor systems