检索结果-南通市图书馆

Characteristic evaluation of Al_2O_3/CNTs hybrid materials for micro-electrical discharge machining

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A1期21卷 28-32页

作者： Hyun-Seok TAK Chang-Seung HA Ho-Jun LEE Hyung-woo LEE young-Keun JEONG Myung-Chang kang National Core Research Center for Hybrid Materials Solution Pusan National University Department of Electrical Engineering Pusan National University

The characteristic evaluation of aluminum oxide （A1203）/carbon nanotubes （CNTs） hybrid composites for micro-electrical discharge machining （EDM） was described. Alumina matrix composites reinforced with CNTs were fabricated by a catalytic chemical vapor deposition method. A1203 composites with different CNT concentrations were synthesized. The electrical characteristic of A1203/CNTs composites was examined. These composites were machined by the EDM process according to the various EDM parameters, and the characteristics of machining were analyzed using field emission scanning electron microscope （FESEM）. The electrical conductivity has a increasing tendency as the CNTs content is increased and has a critical point at 5% A1203 （volume fraction）. In the machining accuracy, many tangles of CNT in A1203/CNTs composites cause violent spark. Thus, it causes the poor dimensional accuracy and circularity. The results show that conductivity of the materials and homogeneous distribution of CNTs in the matrix are important factors for micro-EDM of A1203/CNTs hybrid composites.

关键词： A1203/CNTs hybrid materials micro-electrical discharge machining micro-hole electrical conductivity

A 360-Degree Panoramic Image Inpainting Network Using a Cube Map

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2021年第1期66卷 213-228页

作者： Seo woo Han Doug young Suh Department of Electronic Engineering Kyung Hee UniversityYoungin17104South Korea

Inpainting has been continuously studied in the field of computer *** artificial intelligence technology developed,deep learning technology was introduced in inpainting research,helping to improve ***,the input target of an inpainting algorithm using deep learning has been studied from a single image to a ***,deep learning-based inpainting technology for panoramic images has not been actively *** propose a 360-degree panoramic image inpainting method using generative adversarial networks(GANs).The proposed network inputs a 360-degree equirectangular format panoramic image converts it into a cube map format,which has relatively little distortion and uses it as a training *** the cube map format is used,the correlation of the six sides of the cube map should be ***,all faces of the cube map are used as input for the whole discriminative network,and each face of the cube map is used as input for the slice discriminative network to determine the authenticity of the generated *** proposed network performed qualitatively better than existing single-image inpainting algorithms and baseline algorithms.

关键词： Panoramic image image inpainting cube map generative adversarial networks

Fermentation of mulberry leaves with Cordyceps militaris enhanced anti-adipogenesis activity in 3T3-L1 cells through down-regulation of PPAR-γ pathway signaling

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Asian Pacific Journal of Tropical Medicine 2020年第12期13卷 557-565页

作者： Lu Guo Jum Soon kang young Hoon Park Beong Il Je Dae Youn Hwang woo Hong Joo young Whan Choi Department of Horticultural Bioscience Pusan National UniversityMiryang 50463Republic of Korea Department of Biomaterials Science Pusan National UniversityMiryang 50463Republic of Korea Department of Biology and Chemistry Changwon National UniversityChangwon 51140Republic of Korea Life and Industry Convergence Research Institute Pusan National UniversityMiryang 50463Republic of Korea

Objective:To establish an efficacious and efficient fermentation method of enhancing the anti-adipogenesis effect of mulberry(Morus alba) leaves using Cordyceps ***:Dried mulberry leaves,dried mulberry leaves with50% raw silkworm pupa and raw silkworm pupa were fermented with Cordyceps militais for 4 weeks at 25℃,after which the dried mulberry leaves and fermented product were extracted with 70%ethanol and subjected to high performance liquid chromatography(HPLC).The contents of cordycepin,pelargonidin,chlorogenic acid,iso-quercetin and caffeic acid were *** then used the 3 T3-L1 cells to investigate whether extracts of fermentation enhanced anti-adipogenesis activity in ***:HPLC showed that fermentation changed the contents of cordycepin,pelargonidin,chlorogenic acid,iso-quercetin and caffeic ***,fermented dried mulberry leaves with 50% raw silkworm pupa had a better efficacy of anti-adipogenesis than dried mulberry leaves,fermented dried mulberry leaves and fermented silkworm pupa and inhibited triglycerides accumulation and glucose ***,fermented dried mulberry leaves with50% raw silkworm pupa inhibited PPAR-γ ***:Fermentation with Cordyceps militaris enhanced antiadipogenesis efficacy of mulberry leaves.

关键词： dried fermentation silkworm

Frequency comb-to-comb stabilization over a 1.3-km free-space atmospheric optical link

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Light(Science & Applications) 2022年第9期11卷 2207-2216页

作者： JAEWON YANG DONG IL LEE DONG-CHEL SHIN JAEHYUN LEE BYUNG SOO KIM HYUN JAY kang young-JIN KIM SEUNG-woo KIM Department of Mechanical Engineering Korea Advanced Institute of Science and Technology(KAIST)291 Daehak-roYuseong-guDaejeon 34141Republic of Korea Presently with Korea Research Institute of Standards and Science(KRISS) 267 Gajeong-roYuseong-guDaejeon 34113Republic of Korea

Stabilizing a frequency comb to an ultra-stable optical frequency reference requires a multitude of optoelectronic peripherals that have to operate under strict ambient ***,the frequency comb-to-comb stabilization aims to synchronize a slave comb to a well-established master comb with a substantial saving in required equipment and ***,we report an utmost case of frequency comb-to-comb stabilization made through a 1.3 km free-space optical(FSO)link by coherent transfer of two separate comb lines along with a feedback suppression control of atmospheric phase *** FSO link offers a transfer stability of 1.7×10-15 at 0.1 s averaging,while transporting the master comb,s stability of 1.2×10-15 at 1.0 s over the entire spectrum of the slave *** remote comb-to-comb stabilization is intended to expedite diverse long-distance ground-to-ground or ground-to-satellite applications;as demonstrated here for broadband molecular spectroscopy over a 6THz bandwidth as well as ultra-stable microwaves generation with phase noise of-80dBc Hz-1 at 1 Hz.

关键词： optical stabilization microwave

Evaluation of early-age strains and stresses in roller-compacted concrete pavement

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Traffic and Transportation Engineering(English Edition) 2022年第1期9卷 93-105页

作者： Tetsya Sok young Kyu Kim Jun young Park Seung woo Lee Public Infrastructure Department Ministry of Public Works and TransportPhnom Penh 12100Cambodia Institute for Disaster Prevention Gangneung-Wonju National UniversityGangneung-si 25457South Korea Korea Expressway Research Institute Korea Expressway CorporationHwaseong-si 18489South Korea Civil Engineering Department Gangneung-Wonju National UniversityGangneung-si 25457South Korea

In the structural design of a roller-compacted concrete pavement(RCCP), it is crucial to estimate strain and stress developments in the RCCP slab realistically. Since the RCCP mix uses less cement and lower amount of water, shrinkage strain and concrete temperature during the hardening stage are expected to be reduced as compared to those of conventional concrete mixture, resulting in a reduction of the concrete early-age deformation and stress developments in the RCCP slab. In this paper, early-age concrete strain and stress developments in RCCP slab subjected to environmental loads were evaluated. A full-scale test section of RCCP under real climatic conditions was monitored. The early-age total strains,stress-independent strains, shrinkage strains, and coefficient of thermal expansion(CTE) of the RCCP were measured and analyzed. Using the results of measured strains, in-situ CTE and shrinkage strain, and temperature, the early-age concrete stress development is computed by incorporating a viscoelastic property of the early-age concrete. The results revealed that the shrinkage strain of the RCCP is quite low as compared to that of conventional concrete. The early-age stress developments in the RCCP slab are strongly governed by the thermal-induced stresses. Shrinkage-induced stresses were quite small and might be negligible in a preliminary estimation of early-age stress developments in the RCCP slab.

关键词： Road engineering Roller-compacted concrete pavement Concrete strain Concrete stress Shrinkage strain Environmental loads

Cortex cinnamomi extract prevents streptozotocin- and cytokine-induced β-cell damage by inhibiting NF-κB

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2006年第27期12卷 4331-4337页

作者： kang-Beom Kwon Eun-Kyung Kim Eun-Sil Jeong young-Hoon Lee young-Rae Lee Jin-woo Park Do-Gon Ryu Byung-Hyun Park Department of Physiology School of Oriental MedicineWonkwang UniversityIksan 570-749South Korea Department of Oral Anatomy School of DentistryChonbuk National UniversityJeonju 561-756JeonbukSouth Korea Department of Biochemistry Medical SchoolInstitute for Healthcare Technology DevelopmentMedical Research CenterChonbuk National UniversityJeonju 561-756JeonbukSouth Korea

AIM： To clarify the mechanism underlying the antidiabetic activities of cortex cinnamomi extract （CCE）. METHODS： To induce in vivo diabetes, mice were injected with streptozotocin （STZ） via a tail vein （100 mg STZ/kg body weight）. To determine the effects of CCE, mice were administered CCE twice daily for 7 d by oral gavage starting 1 wk before the STZ injection. Blood glucose and plasma insulin concentration were measured as an index of diabetes. Also, to induce cytotoxicity of RINm5F cells, we treated with cytokines （IL-1β （2.0 ng/mL） and IFN-γ （100 U/mL））. Cell viability and nitric oxide production were measured colorimetrically. Inducible nitric oxide synthase （iNOS） mRNA and protein expression were determined by RT-PCR and Western blotting, respectively. The activation of NF-κβ was assayed by using gel mobility shift assays of nuclear extracts. RESULTS： Treatment of mice with STZ resulted in hyperglycemia and hypoinsulinemia, which was further evidenced by immunohistochemical staining of islets. However, the diabetogenic effects of STZ were completely prevented when mice were pretreated with CCE. The inhibitory effect of CCE on STZ-induced hyperglycemia was mediated through the suppression of iNOS expression. In rat insulinoma RINm5F cells,CCE completely protected against interleukin-1β and interferon-y-mediated cytotoxicity. Moreover, RINm5F cells incubated with CCE showed significant reductions in interleukin-1β and interferon-y-induced nitric oxide production and in iNOS mRNA and protein expression, and these findings correlated well with in vivo observations. CONCLUSION： The molecular mechanism by which CCE inhibits iNOS gene expression appears to involve the inhibition of NF-κβ activation, These results reveal the possible therapeutic value of CCE for the prevention of diabetes mellitus progression,

关键词： Cortex cinnamomi Diabetes Streptozotocin Cytokine NF-κβ

Semi-crystalline photovoltaic polymers with siloxane-terminated hybrid side-chains

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2017年第4期60卷 528-536页

作者： Yuxiang Li Seyeong Song Song Yi Park Jin young Kim Han young woo Department of Cogno-Mechatronics Engineering Pusan National University Miryang 627-706 Republic of Korea Department of Energy and Chemical Engineering Ulsan National Institute of Science and Technology Ulsan 689-798 Republic of Korea Department of Chemistry Korea University Seoul 136-713 Republic of Korea

Three types of semi-cry stalline photovoltaic polymers were synthesized by incorporating a siloxane-terminated organic/inorganic hybrid side-chain and changing the number of fluorine substituents.A branch point away from a polymer main backbone in the siloxane-containing side-chains and the intra-and/or interchain noncovalent coulombic interactions enhance a chain planarity and facile interchain *** resulting polymers formed strongly agglomerated films with high roughness,suggesting strong intermolecular *** optical band gap of ca.1.7 eV was measured for all polymers with a pronounced shoulder peak due to tight π-π *** increasing the fluorine substituents,the frontier energy levels decreased and preferential face-on orientation was *** siloxane-terminated side-chains and fluorine substitution promoted the intermolecular packing,showing well resolved lamellar scatterings up to(300) for this series of polymers in the grazing incidence wide angle X-ray scattering *** PPsiDTBT,PPsiDTFBT and PPsiDT2 FBT devices showed a power conversion efficiency of 3.16%,4.40%and 5.65%,respectively,by blending with PC_(71)***-type bimolecular charge recombination was similar for three polymeric solar *** main loss in the photocurrent generation for PPsiDTBT:PC_(71)BM was interpreted to originate from the trap assisted charge recombination by measuring light-intensity dependent short-circuit current density(J_(SC)) and open-circuit voltage(V_(Oc)).Our results provide a new insight into the rational selection of solubilizing substituents for optimizing crystalline interchain packing with appropriate miscibility with PC71 BM for further optimizing polymer solar cells.

关键词： siloxane side-chain fluorine substitution semi-crystalline charge transport

Joining Technology of Dissimilar Materials for Automotive Components(Ⅱ)

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2004年第Z2期22卷 35-37页

作者： Meung Ho Rhee Jong Ho Song woo young Chung young Myoung Kim Korea Automotive Technology Institute 74 Yongjung-RiPungse-MyunChonanChungnam330-912KOREA Korea Automotive Technology Institute74 Yongjung-RiPungse-MyunChonanChungnam330-912KOREA Korea Automotive Technology Institute74 Yongjung-RiPungse-MyunChonanChungnam330-912KOREA Korea Automotive Technology Institute74 Yongjung-RiPungse-MyunChonanChungnam330-912KOREA

Joining techniques of dissimilar materials for lightweight multi-material automotive body structure were discussed. The joining of 1 .4 mm thickness steel and 2 mm thickness of Al were performed by the new method that is hybrid laser welding system. After aluminum and steel were welded by laser hybrid welding process, the micro-structure investment and the micro-hardness test were carried out. Hybrid laser welding promises a bright future in joining technology of dissimilar materials for automotive components.

关键词： multi-material automotive body dissimilar materials hybrid laser welding

Development of genome engineering technologies in cattle: from random to specific

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Animal Science and Biotechnology 2018年第2期9卷 285-293页

作者： Soo-young Yum Ki-young Youn woo-Jae Choi Goo Jang Department of Veterinary Clinical Science College of Veterinary Medicine and the Research Institute of Veterinary Science Seoul National University Farm Animal Clinical Training and Research Center Institute of Green Bio Science Technology Seoul National University Emergence Center for Food-Medicine Personalized Therapy System Advanced Institutes of Convergence Technology Seoul National University College of Veterinary Medicine Seoul National University

The production of transgenic farm animals(e.g., cattle) via genome engineering for the gain or loss of gene functions is an important undertaking. In the initial stages of genome engineering, DNA micro-injection into one-cell stage embryos(zygotes) followed by embryo transfer into a recipient was performed because of the ease of the ***, as this approach resulted in severe mosaicism and has a low efficiency, it is not typically employed in the cattle as priority, unlike in mice. To overcome the above issue with micro-injection in cattle, somatic cell nuclear transfer(SCNT) was introduced and successfully used to produce cloned livestock. The application of SCNT for the production of transgenic livestock represents a significant advancement, but its development speed is relatively slow because of abnormal reprogramming and low gene targeting efficiency. Recent genome editing technologies(e.g.,ZFN, TALEN, and CRISPR-Cas9) have been rapidly adapted for applications in cattle and great results have been achieved in several fields such as disease models and bioreactors. In the future, genome engineering technologies wil accelerate our understanding of genetic traits in bovine and wil be readily adapted for bio-medical applications in cattle.

关键词： Cattle CRISPR-Cas9 Genome engineering technologies Transgenesis Transposon