检索结果-南通市图书馆

Effective parameters on diameter of carbon nanotubes by plasma enhanced chemical vapor deposition

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 712-716页

作者： Kang young jeong Hyun Kyung JUNG Hyung Woo LEE National Core Research Center for Hybrid Materials Solution Hybrid Graduate SchoolPusan National University Department of Diagnostic Radiology Inje University College of MedicineHaeundae Paik Hospital

The effective parameters on the diameter of carbon nanotubes (CNTs) by plasma enhanced chemical vapor deposition (PECVD) were *** lots of influential parameters,the effects of the catalytic film thickness and the pretreatment plasma power on the growth of CNTs were *** results show that the size of catalytic islands increases by increasing the thickness of catalytic layer,but the density of CNTs *** pretreatment duration time of 30 s is the optimal condition for growing CNTs with about 50 nm in *** increasing the pretreatment plasma power,the diameter of CNTs decreases ***,the diameter of CNTs does not change drastically from 80 to 120 *** uniformly grown CNTs with the diameter of 50 nm are obtained at the pretreatment plasma power of 100 W.

关键词： carbon nanotubes catalytic film thickness pretreatment plasma power plasma enhanced chemical vapor deposition

Effect of Co-Deposited Iron on Microstructures and Properties of Electroplated Nanocrystalline Nickel-Iron Alloys

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2006年第z1期24卷 94-99页

作者： Myung Hwan Byun Jin Woo Cho beom Suck Han young Keun Kim Yo Seung Song Department of Materials Engineering Hankuk Aviation University 200-1 Goyang Korea Nano Technology Based Information & Energy Storage Research Center Korea Electronics Technology Institute Bundang-gu Seongnam-Si 463-816 Korea Department of Materials Science and Engineering Korea University Seoul 136-713 Korea Materials and Processing Research Team Korea Automobile Technology Institute Chonan Chungnam 330-912 Korea Department of Materials Science and Engineering Korea University Seoul 136-713 Korea Department of Materials Engineering Hankuk Aviation University 200-1 Goyang Korea

Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electroplating for MEMS devices. The iron content of the deposits was changed by varying the nickel/iron ion ratio in the electrolyte. X-ray diffraction (XRD) analysis was applied for measuring the strength of the texture and grain size of the deposits. The nickel/iron atom ratio of the deposits was analyzed by EDS. The hardness of the alloys was evaluated by Vickers hardness indenter. The internal stress of the deposits was measured by thin film stress measurement using Stoney's formula. Surface morphology and roughness were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hardness and internal stress mechanism of the electroplated structure as a function of Fe ion content and current density were revealed. With increasing the iron content, the hardness and internal stress of the deposits increase. An excellent correlation between the increase in the internal stress and the loss of (200) texture were found.

关键词： MEMS electroplating nanocrystalline nickel-iron alloy grain size internal stress hardness roughness

Hydrogen spillover in nonreducible oxides:Mechanism and catalytic utilization

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2022年第12期15卷 10357-10365页

作者： Songhyun Lee Hyungjun Kim Ryong Ryoo jeong young Park Minkee Choi Charles D.Davidson School of Chemical Engineering Purdue UniversityWest LafayetteIndiana47907USA Department of Chemical and Biomolecular Engineering Korea Advanced Institute of Science and TechnologyDaejeon34141Republic of Korea Department of Chemistry Korea Advanced Institute of Science and TechnologyDaejeon34141Republic of Korea KENTECH Laboratory for Chemical Environmental and Climate TechnologyKorea Institute of Energy Technology(KENTECH)200 Hyeoksin-roNaju58330Republic of Korea Center for Nanomaterials and Chemical Reactions Institute for Basic Science(IBS)Daejeon34141Republic of Korea

Hydrogen(H)spillover in nonreducible oxides such as zeolites and Al2O3 has been a highly controversial phenomenon in heterogeneous *** industrial catalysts are predominantly prepared using these materials as supports,it is important to understand the mechanism and catalytic functions of H spillover on their *** the past decade,fundamental studies on zeolite-encapsulated metal catalysts have revealed that H spillover and reverse spillover can be utilized in the design of hydrogenation and dehydrogenation catalysts with improved *** experimental and theoretical studies have indicated that H spillover can occur in nonreducible oxides when they possess substantial acid sites that aid the surface migration of active *** the present review,we will discuss the possible mechanisms of H spillover in nonreducible oxides and the unique opportunities of using this phenomenon for the design of advanced hydroprocessing catalysts.

关键词： hydrogen spillover nonreducible oxides zeolites hydroprocessing catalysts

Long-term performance of fiber-grid-reinforced asphalt overlay pavements: A case study of Korean national highways

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Traffic and Transportation Engineering(English Edition) 2019年第4期6卷 366-382页

作者： Jong-Hoon Lee Seung-beom Baek Kang-Hoon Lee Jo-Soon Kim Jin-Hoon jeong Department of Civil Engineering Inha UniversityIncheon 22212South Korea Civil&Environmental BG Doosan Engineering&ConstructionSeoul 06057South Korea Department of Infrastructure Safety Research Korea Institute of Civil Engineering and Building TechnologyGoyang-si 10223South Korea SN Construction Co. LtdDaejeon 34573South Korea

The objective of this study was to verify the effect of fiber grid reinforcement on the longterm performance of asphalt overlay pavements by performing field investigation, laboratory test, and finite element analysis. Crack, rutting, roughness, and other miscellaneous distresses of fiber-grid-reinforced overlay sections and ordinary overlay sections were compared. Pavement conditions of fiber grid overlay sections before and after the overlay were also compared. Cores were obtained from the fiber-grid-reinforced and ordinary sections to measure bonding shear strength between the intermediate and overlay *** energy, displacement after yield, and shear stiffness of the cores were also obtained by analyzing the test results. Finite element analysis was performed by using the test results to validate the effect of the fiber grid reinforcement on the long-term performance of asphalt overlay pavements. Rutting and fatigue cracking were predicted for three cases: 1) fiber grid was not used;2) glass fiber grid was used;and 3) carbon fiber grid was used. The cracking ratio of fiber-grid-reinforced sections was much smaller than that of ordinary sections. The results of field investigation, laboratory test, and finite element analysis showed that the fiber grid reinforcement improved the long-term performance of asphalt overlay pavements.

关键词： Asphalt pavement Fiber grid reinforcement Overlay pavement Finite element analysis Bonding shear strength

Enhancing Hydrophilicity of Thick Electrodes for High Energy Density Aqueous Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2023年第7期15卷 110-121页

作者： Jungeun Lee Hyeonsoo Lee Cheol Bak youngsun Hong Daeha Joung jeong beom Ko Yong Min Lee Chanhoon Kim Sustainable Technology and Wellness R&D Group Korea Institute of Industrial Technology(KITECH)102 Jejudaehak-RoJeju-SiJeju-do 63243Republic of Korea Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of Physics Virginia Commonwealth UniversityRichmondVA 23284USA

Thick electrodes can substantially enhance the overall energy density of ***,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced ***,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of *** binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and *** introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current ***,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous ***,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.

关键词： Thick electrodes Hydrophilic binder Sulfonation Aqueous zinc-ion batteries High areal capacity

Risk stratification for disease progression in pT3 prostate cancer after robot-assisted radical prostatectomy

在线全文

学校读者我要写书评

暂无评论

Asian Journal of Andrology 2017年第6期19卷 700-706页

作者： jeong Hee Hong young Suk Kwon Isaac Yi Kim Section of Urologic Oncology Rutgers Cancer Institute of New Jersey Division of Urology Rutgers Robert Wood Johnson Medical School Rutgers The State University of New Jersey New Brunswick NJ 08903 USA Department of Urology Dankook University College of Medicine Cheonan 31116 South Korea.

The aim of this study is to identify optimal patients for adjuvant radiation therapy （ART） in pT3 prostate cancer. The role of ART for patients with adverse pathologic features after radical prostatectomy （RP） has been demonstrated, but over- or under-treatment remains a significant concern. Two-hundred and five patients with pT3NOMO who underwent robot-assisted RP without ART were analyzed. Multivariate Cox proportional regression analyses were used to identify predictors of biochemical recurrence （BCR） and clinical progression （CP）. The estimated 5-year BCR-free survival （BCRFS） and CP-free survival （CPFS） were 52.8% and 85.6%, respectively. Preoperative prostate-specifc antigen （PSA）：〉10 ng m1-1 （hazard ratio [HR]： 3.288-6.027; P = 0.003）, pathologic Gleason score （pGS）：〉8 （HR： 4.146; P = 0.014）, and lymphovascular invasion （LVI）（HR： 2.167; P = 0.026） were associated with BCR. Based on these factors, a risk stratification tool was developed. Patients with no risk factors （PSA 〈10 ng m1-1, pGS 6, and absent LVI） showed excellent BCRFS and CPFS at 5 years （91.9% and 100.0%, respectively）, but those with two or more risk factors （PSA ：〉10 ng ml-1, pGS ≥8, or present LVI） had poor BCRFS and CPFS （12.1% and 54.6%, respectively）. In addition, the multivariate analysis revealed that pathologic stage pT3b （HR： 5.393; P = 0.025） was the only predictor of CP. Our study demonstrated the heterogeneity of oncologic outcomes in patients with pT3 prostate cancer. The proposed risk stratification can be used to identify patients who are at risk for disease progression and may aid in identifying the best patients for ART.

关键词： prostatectomy prostate-specific antigen recurrence survival

Fuzzy logic controller design with unevenly-distributed membership function for high performance chamber cooling system

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Central South University 2014年第7期21卷 2684-2692页

作者：曹健鹏 Seok-Kwon jeong young-Mi Jung Graduate School of Refrigeration and Air-conditioning Engineering Pukyong National University Department of Refrigeration and Air-conditioning Engineering Pukyong National University

Fuzzy logic controller adopting unevenly-distributed membership function was presented with the purpose of enhancing performance of the temperature control precision and robustness for the chamber cooling *** equalization and noise detection were performed to modify the evenly-distributed membership functions of error and error change rate into unevenly-distributed membership ***,the experimental results with evenly and unevenly distributed membership functions were compared under the same outside environment *** experimental results show that the steady-state error is reduced around 40% and the noise disturbance is rejected successfully even though noise range is 60% of the control precision *** control precision is improved by reducing the steady-state error and the robustness is enhanced by rejecting noise disturbance through the fuzzy logic controller with unevenly-distributed membership ***,the system energy efficiency and lifetime of electronic expansion valve(EEV) installed in chamber cooling system are improved by adopting the unevenly-distributed membership function.

关键词： chamber cooling system fuzzy logic controller unevenly-distributed membership function steady-state error reduction robustness variable speed refrigeration system

Critical cooling rate on carbide precipitation during quenching of austenitic manganese steel

在线全文

学校读者我要写书评

暂无评论

China Foundry 2010年第2期7卷 178-182页

作者： Youn-Soo Ham jeong-Tae Kim Si-young Kwak jeong-Kil Choi Woo-young Yoon Daeyang R-Tech.Co. Ltd290-28Daehwa-DongDaeduk-GuDaejeonKorea e-Design Center KITECH7-47Songdo-DongYeonsu-GuIncheon 406-800Korea Department of Materials Science and Engineering Korea UniversityAnam-DongSeongbuk-GuSeoul 136-701Korea

Critical cooling rate to avoid carbide precipitation during quenching of austenitic manganese steel was investigated by means of optical microscopy,image analyzer and numerical *** efficient heat treatment analysis program including temperature-dependent material properties was developed for the prediction of cooling rate and probability of carbide precipitation during quenching by finite difference ***-dependent heat transfer coefficient was adopted to achieve more precise *** ratio of carbide precipitation was measured by image analyzer to determine the critical point of carbide ***-dependent critical cooling rate at that point was calculated by the developed numerical ***,the probability of carbide precipitation on the whole area of specimen can be predicted by the proposed numerical program and the numerical result of a specimen was compared with the experimental result.

关键词： austenitic manganese steel carbide precipitation quenching critical cooling rate

Ultrasensitive and Highly Stretchable Multiple‑Crosslinked Ionic Hydrogel Sensors with Long‑Term Stability

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2023年第4期15卷 85-96页

作者： Jin‑young Yu Seung Eon Moon jeong Hun Kim Seong Min Kang Department of Mechanical Engineering Chungnam National UniversityDaejeon 34134Korea Emerging Nano‑Materials Research Section Electronics and Telecommunications Research InstituteDaejeon 305‑700Republic of Korea

Flexible hydrogels are receiving significant attention for their application in wearable ***,most hydrogel materials exhibit weak and one-time adhesion,low sensitivity,ice crystallization,water evaporation,and poor self-recovery,thereby limiting their application as *** issues are only partly addressed in previous ***,a multiplecrosslinked poly(2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide-co-acrylamide)(P(SBMA-co-AAm))multifunctional hydrogel is prepared via a one-pot synthesis method to overcome the aforementioned ***,ions,glycerol,and 2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide are incorporated to reduce the freezing point and improve the moisture retention *** proposed hydrogel is superior to existing hydrogels because it exhibits good stretchability(a strain of 2900%),self-healing properties,and transparency through effective energy dissipation in its dynamic crosslinked ***,2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide as a zwitterion monomer results in an excellent gauge factor of 43.4 at strains of 1300-1600%by improving the ion transportability and achieving a strong adhesion of 20.9 kPa owing to the dipole-dipole *** proposed hydrogel is promising for next-generation biomedical applications,such as soft robots,and health monitoring.

关键词： Hydrogel sensors Biocompatibility Multifunction High-sensitivity sensors Multiple-crosslink association