检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2016年第1期23卷 92-101页

作者： Peng Wang ye-dong he Shun-jie Deng Jin Zhang Beijing Key Laboratory for Corrosion Erosion and Surface Technology University of Science and Technology Beijing

Porous α-Al2O3 thermal barrier coatings （TBCs） containing dispersed Pt particles were prepared by cathode plasma electrolytic deposition （CPED）. The influence of the Pt particles on the microstructure of the coatings and the CPED process were studied. The prepared coatings were mainly composed of α-Al2O3. The average thickness of the coatings was approximately 100 μm. Such single-layer TBCs ex- hibited not only excellent high-temperature cyclic oxidation and spallation resistance, but also good thermal insulation properties. Porous α-Al2O3 TBCs inhibit further oxidation of alloy substrates because of their extremely low oxygen diffusion rate, provide good thermal insu- lation because of their porous structure, and exhibit excellent mechanical properties because of the toughening effect of the Pt particles and because of stress relaxation induced by deformation of the porous structure.

关键词： porous material thermal barrier coatings alumina platinum electrolytic deposition oxidation

La_2Zr_2O_7 TBCs toughened by Pt particles prepared by cathode plasma electrolytic deposition

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2016年第6期23卷 704-715页

作者： Shun-jie Deng Peng Wang ye-dong he Jin Zhang Institute for Advanced Materials and Technology University of Science and Technology Beijing

La2Zr2O7 thermal barrier coatings（TBCs） with dispersed Pt particles were prepared by cathode plasma electrolytic deposition（CPED） with ceramic balls added to the cathode region. Compared with the conventional CPED, when ceramic balls are used in the cathode region, the plasma discharge ignition current density decreases approximately 62-fold and the stable plasma discharges occur at the whole cathode surface. Such TBCs with a thickness of 100 μm exhibit a crack-free surface and are composed of pyrochlore-structured La2Zr2O7. Cyclic oxidation, scratching, and thermal insulation capability tests show that such TBCs not only exhibit high resistance to oxidation and spallation but also provide good thermal insulation. These beneficial effects are attributed to the excellent properties of TBCs, such as good thermal insulation because of low thermal conductivity, high-temperature oxidation resistance because of low-oxygen diffusion rate, and good mechanical properties because of the toughening effect of Pt particles.

关键词： thermal barrier coatings platinum oxidation resistance toughening electrolytic deposition

Morphological evolution of tunnel tips for aluminum foils during DC etching

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2013年第10期20卷 961-966页

作者： Li-bo Liang ye-dong he Hong-zhou Song Xiao-fei Yang Xiao-yu Cai School of Materials Science and Engineering University of Science and Technology Beijing Institute of Technology Research and Development of Electronic Aluminium Foil Guangxi Hezhou Guidong Electronics TechnologyCo.Ltd.

The morphologies of tunnel tips in different stages for aluminum foils during DC etching in 1.5 mol/L HC1 solution at 90℃ were observed by field emission scanning electron microscopy （FE-SEM）. A novel model was proposed to describe the morphological evolution of tunnel tips throughout the growth processes. In the pit nucleation stage, the pits vary from the hemispherical to half-cubic shapes due to the activation of pit tips from the center to the edge. During the tunnel growth stage, the pits dissolve toward the depth direction and develop into the tunnels, and their tips remain flat. In the tip passivation stage, as the passivation of tunnel tips speeds up from the edge to the center＇s the tunnel tips change from flat shapes to three-dimensional protrusions. The mechanism may be attributed to the order of activation or passivation on the tunnel tips changed in different stages.

关键词： aluminum corrosion pitting polarization etching electrolytic capacitors

Effect of tunnel structure on the specific capacitance of etched aluminum foil

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2014年第10期21卷 974-979页

作者： Ning Peng Li-Bo Liang ye-dong he Hong-Zhou Song Xiao-Fei Yang Xiao-Yu Cai Beijing Key Laboratory for Corrosion Erosion and Surface Technology University of Science and Technology Beijing Institute of Technology Research and Development of Electronic Aluminum Foil Guangxi Hezhou Guidong Electronics Technology Co. Ltd.

The morphology of etched aluminum foil was observed using scanning electron microscopy, which led to the establishment of a cylindrical model and two merged models, considering the fixed weight loss of etching. The maximum of specific capacitance and the cor- responding optimum values for tunnel sizes at various anodization voltages were predicted. The increased size distribution and taper of tun- nels were demonstrated to decrease the specific capacitance, whereas the addition of polymeric additive into the ttmnel widening solution was demonstrated to increase the capacitance. The formation of merged tunnels on the etched aluminum surface, irrespective of the presence of row-merged tunnels or cluster-merged tunnels, resulted in a dramatic decrease in the specific capacitance. It is concluded that, enhancing the uniformity of turmel size and distribution and avoiding the formation of merged tunnels are the effective approach to achieving the higher capacitance for the tunnel etched and formed aluminum foil.

关键词： aluminum foil pitting corrosion capacitance morphology electrolytic capacitors

Effects of HNO_3 concentration on the pit morphologies of aluminum foil etched in HNO_3–HCl and HNO_3–H_2SO_4–HCl solutions

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2016年第1期23卷 70-76页

作者： Quan-xiu Yi ye-dong he Ning Peng Hong-zhou Song Xiao-fei Yang Xiao-yu Cai Beijing Key Laboratory for Corrosion Erosion and Surface Technology University of Science and Technology Beijing Institute of Technology Research and Development of Electronic Aluminum Foil Guangxi Hezhou Guidong Electronics Technology Co. Ltd.

In this work, the effects of HNO3 concentration on the pit morphologies of high-cubic-texture aluminum foil etched in HNO3-HCl and HNO3-H2SO4-HCl solutions were investigated. When the aluminum foil was etched in HNO3-HCl solutions, the morphologies of pits transformed from irregular tunnels to typical tunnels （as inverted pyramids） and shallow cuboids as the HNO3 concentration in the etchant solution was increased. However, as the HCl concentration in the etchant solution was increased, the morphologies of pits transformed from shallow cuboids to typical tunnels （as inverted pyramids） and irregular tunnels. When the aluminum foil was etched in n N HNO3-（7.2-n） N H2SO4-0.8 N HCl solutions, the morphologies of the pits transformed from typical tunnels （i.e., the number of sub-tunnels formed on the main tunnels increased） to irregular tunnels （corrugated tnnnels and polyline tunnels） as the HNO3 concentration in the etchant solution was increased. These effects are attributed primarily to corrosion on the （100） and （010） faces of pits being accelerated and to the （001） faces be- ing prone to passivation to different degrees when various concentrations of HNO3 are added to the etchant solutions.

关键词： aluminum foil pitting corrosion morphology passive films

Effect of pretreatment on electrochemical etching behavior of Al foil in HCl-H_2SO_4

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2013年第4期23卷 1039-1045页

作者：班朝磊何业东邵鑫杜鹃聊城大学材料科学与工程学院聊城252059 北京科技大学北京市腐蚀磨蚀与表面技术重点实验室北京100083

The aluminum foil for high voltage aluminum electrolytic capacitor was immersed in 0.5 mol/L H3PO4 or 0.125 mol/L NaOH solution at 40 ℃ for different time and then DC electro-etched in 1 mol/L HC1＋2.5 mol/L H2SO4 electrolyte at 80 ℃. The pitting potential and self corrosion potential of A1 foil were measured with polarization curves （PC）. The potentiostatic current--time curve was recorded and the surface and cross section images of etched A1 foil were observed with SEM. The electrochemical impedance spectroscopy （EIS） of etched A1 foil and potential transient curves （PTC） during initial etching stage were measured. The results show the chemical pretreatments can activate A1 foil surface, facilitate the absorption, diffusion and migration of C1- onto the A1 foil during etching, and improve the initiation rate of meta-stable pits and density of stable pits and tunnels, leading to much increase in the real surface area and special capacitance of etched A1 foil.

关键词： A1 foil polarization pitting corrosion electrochemical etching AI electrolytic capacitor

High-dense nanocrystalline W-based alloy prepared by hot isostatic pressing with uniform microstructure, ultrahigh hardness and good thermal stability

在线全文

学校读者我要写书评

暂无评论

Tungsten 2025年第1期7卷 120-136页

作者： Zao-Ming Wu Lin he Lin-Sen ye Xiao-Feng Yang Jia-Jia Zhang Hong-Bo Lei Institute of Materials China Academy of Engineering Physics

High-density uniform microstructure nanocrystalline W-10wt.% Cr-5wt.% Y（W-10Cr-5Y） alloy with an average grain size of 85 nm and a relative density of 99.8% was successfully prepared.W-Cr-Y alloys with different amounts of second-phase particles were prepared by high-energy ball milling and hot isostatic pressing *** effects of composition design,ball milling parameters,and sintering parameters on the microstructure of W-Cr-Y alloys were studied.A feasible technology for controlling the synthesis of high-density nanocrystalline W-based alloys has been *** microstructure analysis of nanocrystalline W-10Cr-5Y alloy shows that there are two types of doping in the second phase:intergranular doping and intragranular *** "uniform distribution YOx-rich particles" effectively suppresses the grain growth of W and leads to the formation of nanocrystalline W-10Cr-5Y alloy.W-10Cr-5Y has an ultra-high hardness,with a Vickers hardness of 1312±12 kgf·***-temperature annealing treatment shows that W-10Cr-5Y has good thermal stability at 1000 and1100℃,as demonstrated by the comparison of Vickers hardness and grain size between annealed and unannealed alloys.

关键词： Hot isostatic pressing Microstructure Nanocrystalline tungsten Thermal stability Vickers hardness

Effect of chemical plating Zn on DC-etching behavior of Al foil in HCl-H_2SO_4

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2013年第12期23卷 3650-3657页

作者：班朝磊何业东邵鑫杜鹃王利平聊城大学材料科学与工程学院有色金属研究院聊城252059 北京科技大学北京市腐蚀磨蚀与表面技术重点实验室北京100083

The Al foil for high voltage Al electrolytic capacitor usage was immersed in 5.0%NaOH solution containing trace amount of Zn2＋and Zn was chemically plated on its surface through an immersion-reduction reaction. Such Zn-deposited Al foil was quickly transferred into HCl-H 2 SO 4 solution for DC-etching. The effects of Zn impurity on the surface and cross-section etching morphologies and electrochemical behavior of Al foil were investigated by SEM, polarization curve （PC） and electrochemical impedance spectroscopy （EIS）. The special capacitance of 100 V formation voltage of etched foil was measured. The results show that the chemical plating Zn on Al substrate in alkali solution can reduce the pitting corrosion resistance, enhance the pitting current density and improve the density and uniform distribution of pits and tunnels due to formation of the micro Zn-Al galvanic local cells. The special capacitance of etched foil grows with the increase of Zn2＋concentration.

关键词： Al foil polarization pitting corrosion electrochemical etching Al electrolytic capacitor

Magnetron sputtered nickel oxide with suppressed interfacial defect states for efficient inverted perovskite solar cells

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng dong he Qiang Sun Xuhang Ma Francesco Lamberti Zhubing he Department of Materials Science and Engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core Research Facilities Southern University of Science and Technology Department of Chemical Sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Perovskite

Enhanced autophagic clearance of amyloid-βvia histone deacetylase 6-mediated V-ATPase assembly and lysosomal acidification protects against Alzheimer's disease in vitro and in vivo

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第9期20卷 2633-2644页

作者： Zhimin Long Chuanhua Ge Yueyang Zhao Yuanjie Liu Qinghua Zeng Qing Tang Zhifang dong Guiqiong he Institute of Neuroscience School of Basic Medical SciencesChongqing Medical UniversityChongqingChina Department of Anatomy Chongqing Medical UniversityChongqingChina Department of Physiology Chongqing Medical UniversityChongqingChina Pediatric Research Institute Children’s Hospital of Chongqing Medical UniversityChongqingChina Ministry of Education Key Laboratory of Child Development and Disorders Children’s Hospital of Chongqing Medical UniversityChongqingChina National Clinical Research Center for Child health and Disorders Children’s Hospital of Chongqing Medical UniversityChongqingChina Chongqing Key Laboratory of Child Neurodevelopment and Cognitive Disorders Children’s Hospital of Chongqing Medical UniversityChongqingChina

Recent studies have suggested that abnormal acidification of lysosomes induces autophagic accumulation of amyloid-βin neurons,which is a key step in senile plaque ***,resto ring normal lysosomal function and rebalancing lysosomal acidification in neurons in the brain may be a new treatment strategy for Alzheimer's *** acetylation/deacetylation plays a central role in lysosomal ***,we show that inhibiting the classic microtubule deacetylase histone deacetylase 6 with an histone deacetylase 6 shRNA or thehistone deacetylase 6 inhibitor valproic acid promoted lysosomal reacidification by modulating V-ATPase assembly in Alzheimer's *** rthermore,we found that treatment with valproic acid markedly enhanced *** clearance of amyloid-βaggregates,and ameliorated cognitive deficits in a mouse model of Alzheimer's *** findings demonstrate a previously unknown neuroprotective mechanism in Alzheimer's disease,in which histone deacetylase 6 inhibition by valproic acid increases V-ATPase assembly and lysosomal acidification.

关键词： Alzheimer's disease amyloid-β APP/PS1 mice autophagy cognitive impairment histone deacetylase 6 lysosomal acidification microtubule acetylation valproic acid V-ATPase