检索结果-南通市图书馆

Chinese Journal of Integrative Medicine 2024年第8期30卷 721-728页

作者： WANG Bi-yan BU Hong-shi XIA Li-bo JIANG Xiang-yu TONG yan-qing Department of Traditional Chinese Medicine Changchun University of Traditional Chinese MedicineChangchun130000China

Objective To investigate the effect of low concentration of Wenyang Tonglin Decoction(WTD)on the binding conditions of R45 plasmid conjugative transfer under liquid phase conjugation and its *** Escherichia coli CP9(R45)and Staphylococcus aureus RN450RF were cultured in medium containing WTD,and their minimum inhibitory concentration(MIC)values were *** promoter fusion technology,*** CP9(R45)containing a promoter fusion was obtained.β-Galactosidase activity of TrfAp and TrbBp was tested,and the mRNA expression of regulatory factors(TrbA,KorA,and KorB)was detected by real-time fluorescent quantitative polymerase chain *** The MIC of *** CP9(R45)was 400 g/L and that of *** RN450RF was 200 g/*** the drug concentration in the culture medium was 200 g/L,the highest number of conjugants was(3.47±0.20)×10^(7) CFU/mL At 90 h of conjugation,the maximum number of conjugants was(1.15±0.06)×10^(8) CFU/mL When the initial bacterial concentration was 10^(8) CFU/mL,the maximum number of conjugants was(3.47±0.20)×10^(7) CFU/*** the drug concentration was 200 g/L,theβ-galactosidase activity of TrfAp and TrbBp significantly increased;the relative quantification of TrbA,KorA and KorB were significantly *** Low concentration of WTD promoted the development of bacterial resistance by affecting promoters and inhibiting the expression of regulatory factors.

关键词： urinary tract infection Chinese medicine drug-resistant plasmid heterozygous strains conjugation transfer

Mechanical performance of 22SiMn2TiB steel welded with lowtransformation- temperature filler wire and stainless steel filler wire

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 967-981页

作者： Zi-dong Lin Kai-jie Song Zhen Sun Zi-qian Zhu Xue-feng Zhao Constantinos Goulas Wei ya Xing-hua yu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401120China Department of Design Production and Management Faculty of Engineering Technology.University of TwenteEnschede 7500 AETheNetherlands Rotterdam Additive Manufacture Fieldlab(RAMLAB) Rotterdam 3089 JWTheNetherlands

TX-80 low-transformation-temperature(LTT)welding wire was used to replace the traditional ER 307Si welding wire to realize the connection of 22SiMn2TiB armor steel in manual overlay *** previously existing issues,such as welding cracks,large welding deformation,and severe welding residual stress,were solved to ensure good strength and ductility *** particular,with the same welding conditions,TX-80 LTT wire eliminates welding *** reduces the welding deformation no matter the base pretreatment of pre-setting angle or no pre-setting *** comparison,it was found that the microstructure at the TX-80 weld is mainly composed of martensite and a small amount of retained *** contrast,the microstructure of the ER 307Si weld consists of a large amount of austenite and a small amount of skeleton-like *** variation trend of residual stress and microhardness from the weld to the base were investigated and compared with the mechanical properties of base *** TX-80 and the ER 307Si tensile samples elongation is 6.76%and 6.01%,while the ultimate tensile strengths are 877 and 667 MPa,*** average impact toughness at room temperature of the ER 307Si weld is 143.9 J/cm^(2),much higher than that of the TX-80 weld,which is only 36.7 J/cm^(2).The relationship between impact and tensile properties with microstructure species and distribution was *** addition,the fracture surface of the tensile and the impact samples was observed and *** dimples,fewer pores,larger radiation zone,and shear lips of TX-80 samples indicate better tensile ductility and worse impact toughness than those of ER 307Si weld.

关键词： Low-transformation-temperature material 22SiMn2TiB steel Welding deformation Residual stress Martensitic transformation Mechanical property

Iron–doped bismuth oxybromides as visible-light-responsive Fenton catalysts for the degradation of atrazine in aqueous phases

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第3期137卷 321-332页

作者： Yong-Li Cai yu-Hang Xu Ji-Zun Xiang Zhi-Qiang Zhang Qiu-Xiang He ya-Feng Li Jian Lü Fujian Provincial Key Laboratory of Soil Environmental Health and Regulation College of Resources and EnvironmentFujian Agriculture and Forestry UniversityFuzhou 350002China State Key Laboratory of Photocatalysis on Energy and Environment Fuzhou UniversityFuzhou 350116China

Pesticides and its degradation products,being well–known residues in soil,have recently been detected in many water bodies as pollutants of emerging concerns,and thus there is a contemporary demand to develop viable and cost–effective techniques for the removal of related organic pollutants in aqueous ***,a visible-light-responsive Fenton system was constructed with iron–doped bismuth oxybromides(Fe–BiOBr)as the *** the advantage of sustainable Fe(Ⅲ)/Fe(Ⅱ)conversion and optimized H_(2)O_(2)utilization,the optimal Fe–BiOBr–2 catalyst showed an excellent atrazine removal efficiency of 97.61%in 120 min,which is superior than the traditional homogeneous Fenton and the majority of heterogeneous processes documented in the *** this photo–Fenton system,hydroxyl(·OH)and superoxide(·O_(2)^(-))radicals were dominant active species contributed to the oxidative degradation of *** to the production of various active radicals,five degradation pathways were proposed based on the identification of intermediates and degradation ***,this work not only demonstrates a fundamental insight into creating highly efficient and atom economic photo-Fenton systems,but also provides a complementary strategy for the treatment of organic pollutants in water.

关键词： Bismuth oxybromide Photo–Fenton Atrazine Catalytic degradation

Is reactive oxygen species the only way for cancer inhibition over single atom nanomedicine?Autophagy regulation also works

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第6期35卷 474-479页

作者： yuanyi Zhou Ke Ma Jinfeng Liu Zirun Zheng bo Hu yu Meng Zhizhong Li Mingshan Zhu Postdoctoral Innovation Practice Base The First and Fifth Affiliated Hospital of Jinan UniversityGuangzhou 510632China Guangdong Provincial Key Laboratory of Spine and Spinal Cord Reconstruction The Fifth Affiliated Hospital of Jinan University(Heyuan Shenhe People’s Hospital)Heyuan 517465China School of Environment Jinan UniversityGuangzhou 511443China Department of Nephrology The First Affiliated Hospital of Jinan UniversityGuangzhou 510632China

Exploring the therapeutic effect of single atom catalysts beyond reactive oxygen species(ROS)modulation would boost the prosperity of nanomedicine in cancer *** as a vital therapy target offers new options for the control of renal cell carcinoma(RCC)***,Fe single atom-decorated graphene oxide(Fe_(1)-GO)nanosheet is developed to be a feasible autophagy inducer in RCC *** the well-dispersed O-Fe_(1)-O active sites,Fe_(1)-GO kills ACHN cells effectively but maintains acceptable cytotoxicity to the normal podocyte and HK2 ***-depth analyses ascribe the inhibition of ACHN cells to the upregulated autophagy instead of the commonly known catalytic ROS *** in vivo therapeutic effect of Fe_(1)-GO nanomedicine is also validated by the RCC-bearing BALB/c mice model,realizing an 89% reduction of tumor weight and good *** work provides new insights into the design of autophagy regulators as well as potential therapeutic strategies for RCC treatment.

关键词： Fe single atom Autophagy Renal cell carcinoma Graphene oxide Cancer therapy

Bipolar hip arthroplasty using conjoined tendon preserving posterior lateral approach in treatment of displaced femoral neck fractures

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第6期12卷 1076-1083页

作者： Ting-Xin yan Sheng-Jie Dong bo Ning yu-Chi Zhao Department of Joint Surgery Yantaishan HospitalYantai 264003Shandong ProvinceChina Department of Joint Surgery Dongying People's HospitalDongying 257091Shandong ProvinceChina

BACKGROUND Hip fractures account for 23.8%of all fractures in patients over the age of 75 *** than half of these patients are older than 80 *** hemiarthroplasty(BHA)was established as an effective management option for these *** approaches can be used for the BHA ***,there is a high risk of postoperative *** conjoined tendon-preserving posterior(CPP)lateral approach was introduced to reduce postoperative dislocation *** To evaluate the effectiveness and safety of the CPP lateral approach for BHA in elderly *** We retrospectively analyzed medical data from 80 patients with displaced femoral neck fractures who underwent *** patients were followed up for at least 1 *** the 80 patients,57(71.3%)were *** time to operation averaged 2.3 d(range:1-5 d).The mean age was 80.5 years(range:67-90 years),and the mean body mass index was 24.9 kg/m^(2)(range:17-36 kg/m^(2)).According to the Garden classification,42.5%of patients were typeⅢand 57.5%of patients were typeⅣ.Uncemented bipolar hip prostheses were used for all *** conjoined tendons,dislocations,and adverse complications during and after surgery were *** The mean postoperative follow-up time was 15.3 months(range:12-18 months).The average surgery time was 52 min(range:40-70 min)with an average blood loss of 120 mL(range:80-320 mL).The transfusion rate was 10%(8 of 80 patients).The gemellus inferior was torn in 4 patients(5%),while it was difficult to identify in 2 patients(2.5%)during *** posterior capsule was punctured by the fractured femoral neck in 3 patients,but the conjoined tendon and the piriformis tendon remained *** patients had stem varus greater than 3 degrees or femoral *** were no patients with stem subsidence more than 5 mm at the last *** postoperative dislocations were observed throughout the follow-up *** significance was found between preoperative an

关键词： Conjoined tendon preserving Bipolar hip arthroplasty Femoral neck fractures Postoperative dislocation Posterolateral approach

The future of artificial hibernation medicine:protection of nerves and organs after spinal cord injury

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第1期19卷 22-28页

作者： Caiyun Liu Haixin yu Zhengchao Li Shulian Chen Xiaoyin Li Xuyi Chen bo Chen School of Acupuncture&Moxibustion and Tuina Tianjin University of Traditional Chinese MedicineTianjinChina Research Center of Experimental Acupucture Science Tianjin University of Traditional Chinese MedicineTianjinChina Characteristic Medical Center of Chinese People’s Armed Police Force TianjinChina Binhai New Area Hospital of TCM TianjinChina Fourth Teaching Hospital of Tianjin University of TCM TianjinChina

Spinal cord injury is a serious disease of the central nervous system involving irreversible nerve injury and various organ system *** present,no effective clinical treatment *** one of the artificial hibernation techniques,mild hypothermia has preliminarily confirmed its clinical effect on spinal cord ***,its technical defects and barriers,along with serious clinical side effects,restrict its clinical application for spinal cord *** hibernation is a futureoriented disruptive technology for human life *** involves endogenous hibernation inducers and hibernation-related central neuromodulation that activate particular neurons,reduce the central constant temperature setting point,disrupt the normal constant body temperature,make the body adapt"to the external cold environment,and reduce the physiological resistance to cold ***,studying the artificial hibernation mechanism may help develop new treatment strategies more suitable for clinical use than the cooling method of mild hypothermia *** review introduces artificial hibernation technologies,including mild hypothermia technology,hibernation inducers,and hibernation-related central neuromodulation *** summarizes the relevant research on hypothermia and hibernation for organ and nerve *** studies show that artificial hibernation technologies have therapeutic significance on nerve injury after spinal co rd injury through inflammatory inhibition,immunosuppression,oxidative defense,and possible central *** also promotes the repair and protection of res pirato ry and digestive,cardiovascular,locomoto r,urinary,and endocrine *** review provides new insights for the clinical treatment of nerve and multiple organ protection after spinal cord injury thanks to artificial *** present,artificial hibernation technology is not mature,and research fa ces various *** rtheless,the effort is wo rthwhi

关键词： artificial hibernation central thermostatic-resista nt regulation hypothermia multi-system protection neuroprotection organ protection spinal cord injury synthetic torpor

Correction to“Research progress of ferroptosis regulating lipid peroxidation and metabolism in occurrence of primary liver cancer”

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastrointestinal Oncology 2024年第10期16卷 4298-4299页

作者： yu-Jie Shu bo Lao Ying-yang Qiu Department of Gastroenterology Yinzhou District Second HospitalNingbo 315199Zhejiang ProvinceChina Yong Loo Lin School of Medicine National University of SingaporeSingapore 119077Singapore

Correction to“Research progress of ferroptosis regulating lipid peroxidation and metabolism in occurrence and development of primary liver cancer”in World J Gastrointest Oncol 2024;16:2335-2349,published by Shu YJ,L... 详细信息

关键词： Correction Ferroptosis Lipid peroxidation Primary liver cancer Lipid metabolism

Laser powder bed fusion of NiTiFe shape memory alloy via premixed powder:microstructural evolution,mechanical and functional properties

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2300-2316页

作者： bo yuan Jin-Guo Ge Liang Zhang Hong-Jun Chen Long-Sha Wei yu-Duo Zhou Run-Hua Song Institute of Intelligent Manufacturing Technology Shenzhen PolytechnicShenzhen 518055China School of Mechanical and Electrical Engineering Guilin University of Electronic TechnologyGuilin 541004China Guangdong Advanced Polymer Composite Engineering Technology Research Center Shenzhen Academy of Aerospace TechnologyShenzhen 518057China Jihua Laboratory Testing Center Jihua LaboratoryFoshan 528000China

High-cost pre-alloyed powder is the bottleneck problem that limits the widespread application of additivemanufactured shape memory *** this work,the lowcost ternary NiTiFe shape memory alloy is fabricated by laser powder bed fusion(LPBF)technique via mechanically mixed pre-alloy NiTi powder and varying contents pure Fe powder(1,2,3 wt%).All NiTiFe alloys show a relative density of up to 99.8%by optimizing the LPBF processing *** to the heterogeneous nucleation effect of micron-sized Fe particles,both grain refinement and texture weakening are generated in the NiTiFe alloys,accompanied by the reduction of dislocation *** the room-temperature mechanical properties,the NiTi-3Fe alloy shows the highest microhardness of HV370,but the fracture strength and elongation reduce to1701 MPa and 23%*** evolution of mechanical properties is attributed to the high internal defects,low dislocation density and the incoherent ***,the NiTi-3Fe alloy shows the quasi-linear superelasticity behavior;the superelastic recoverable strain of NiTi-1Fe and NiTi-2Fe decreased with the increase in Fe *** study provided a new-fangled insight for the development of multi-component NiTi-based shape memory alloys by additive manufacturing.

关键词： Additive manufacturing Shape memory alloy Metal matrix composite Microstructure Mechanical properties

Super-high bed sintering for iron ores:problems ascertainment

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1063-1070页

作者： Liang-ping Xu Hui-bo Liu yu-chao Zhao Qiang Zhong Zhong-lin Dong Guang-hui Li Tao Jiang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina

Super-high bed sintering process is an important development direction of iron ore sintering for its lower emission and higher ***,there is a lack of deep understanding of the uneven quality of super-high bed sintering products,and the deterioration of reduction disintegration performance,the thickening of hearth layer and the reduction in energy-saving effect are perplexing enterprises and *** ascertain the problems of super-high bed sintering,ten sintering machines with the areas of 265,280,360,550 and 660 m^(2)and bed depth above 900 mm were sampled and *** results showed that problems were mainly shown in the unevenness of chemical composition,macrostructure,mechanical strength and metallurgical *** chemical composition exhibits severe segregation in both horizontal and vertical directions,with basicity segregation reaching as high as *** uneven macrostructure of sinter is reflected in a 10%difference in porosity and mechanical strength increase in 16%–19%along the vertical *** reducibility and reduction disintegration performance gradually deteriorate along the bed depth,with a difference of 10.5%in reducibility and 7.3%in RDI−0.5 mm(reduction disintegration index of sinter with size smaller than 0.5 mm).

关键词： Super-high bed sintering Uneven sinter performance Segregation Agglomeration Iron ore

Patterned microsphere-lens projection lithography using an electrohydrodynamic-jetprinting-assisted assembly

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photonics Research 2024年第7期12卷 1502-1512页

作者： ya ZHONG HAIbo yu PEILIN ZHOU HONGJI GUO TIANMING ZHAO HAO LUO yaNGDONG WEN XIAODUO WANG LIANQING LIU State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110016China University of Chinese Academy of Sciences Beijing 100049China College of Mechanical and Electrical Engineering Henan Agricultural UniversityZhengzhou 450002China Institute of Urban Rail Transportation Southwest Jiaotong UniversityChengdu 610000China

Microlens arrays have been widely used in the fields of micro-optics and micro-and nanofabrication. Traditional preparation methods utilize commercial photoresists and thermosetting materials, thereby restricting the optical properties of microlenses. In recent years, significant advancements have been achieved in near-field super-resolution imaging by utilizing microspheres and forming arrays of microsphere lenses via self-assembly. However, self-assembly approaches lack flexibility in terms of pattern selection. This study proposes a method that utilizes electrohydrodynamic jet (E-jet) printing to code ultraviolet (UV)-curable adhesives and assist in the assembly of patterned microsphere-lens arrays. Simulation results demonstrate that the UV-curable adhesive has little impact on the optical properties of the microsphere lens. Moreover, the microsphere lens exhibits a superior imaging resolution compared with traditional microlenses. A projection-lithography system is developed to achieve an accurate alignment between the focal plane of the microsphere lenses and the plane of the photoresist, facilitating the fabrication of patterned nanostructures. The lithographic nanostructures have a minimum feature size of 850 nm. This method enables the fabrication of arrays of microsphere lenses with arbitrary patterns and presents an inexpensive and simple strategy for fabricating micro-and nanostructure arrays with submicrometer features.

关键词： projection utilize utilizing