检索结果-南通市图书馆

Science China(Technological Sciences) 2022年第2期65卷 481-489页

作者： LEI SaiLing WANG LiMing WANG RongWu QIN XiaoHong YU JianYong Key Laboratory of Textile Science&Technology Ministry of EducationCollege of TextilesDonghua UniversityShanghai 201620China Innovation Center for Textile Science and Technology Donghua UniversityShanghai 201620China

Electrospun nanofibers are regarded as a promising candidate for filtration because of their prominent size effect.The precise control of nanofiber diameter is the key to the material’s outstanding filtration capability,but it remains a challenge.Herein,an electrohydrodynamic scaling model is established for the accurate prediction of fiber diameter based on the velocity of the whipping jet.In this model,the velocity reflects jet stretching and is tuned by adding salt.The theoretical predictions agree well with the experimental results.With the proposed diameter model,the filtration property of the membrane is significantly optimized by governing the fiber diameter.When the nanofiber is slenderized to 183 nm,an ultralight (0.521 g m;) membrane exhibits high filtration efficiency (99.93%) and low pressure drop (105.2 Pa) against ultrafine aerosol particles (≤0.26μm) under an airflow face velocity of 5.33 cm s^(-1).These findings demonstrate that the established surface charge-based diameter model provides an excellent platform to timely and accurately control the nanofiber diameter via the velocity of whipping jets for highefficiency air filtration.

关键词： electrospinning jet velocity fiber diameter filtration

Semi-template based,biomimetic-architectured,and mechanically robust ceramic nanofibrous aerogels for thermal insulation

在线全文

学校读者我要写书评

暂无评论

Nano Research 2022年第6期15卷 5581-5589页

作者： Lvye Dou Yang Si jianyong yu Bin Ding Innovation Center for Textile Science and Technology College of TextilesDonghua UniversityShanghai 200051China State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijing 100084China

Energy efficient buildings require novel thermal insulators accompanied by lightweight,mechanically robust,fire resistant,and low thermal conductivity.Ceramic fibrous aerogels have emerged as promising candidates,however it’s difficult for these materials to achieve exceptional mechanical and thermal insulation performance simultaneously.Here,we demonstrate a unique semi-template method to fabricate biomimetic-architectured silica/carbon dual-fibrous aerogel with robust mechanical performance.Specifically,aerogels with honeycomb-like cellular and nanofiber/nanonet cell wall were constructed by freezedrying the homogeneous dispersion of SiO_(2)nanofibers and cellulose nanofibers co-suspensions.It is worth noting that the biomimetic structure has been perfectly inherited even subjected to high-temperature carbonization.As a result,the excellent structural stability brought by the novel structure enables the aerogel to completely recover under large compression and buckling strain of 80%,and exhibit robust fatigue resistance over 200,000 cycles.More importantly,the aerogels exhibit ultralow thermal conductivity(0.023 W·m^(−1)·K^(−1)),superior flame retardancy,together with excellent thermal insulation performance over a wide temperature ranging from−196 to 350°C.The fabrication of such materials may provide new ideas for the development of next-generation thermal insulators for harsh conditions.

关键词： silica nanofiber carbon nanonet biomimetic-architectured aerogel mechanically robust thermal insulation

Flexible, self-cleaning, and high-performance ceramic nanofiber-based moist-electric generator enabled by interfacial engineering

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2022年第2期65卷 450-457页

作者： WANG LiMing FENG LanLan SUN Zhao Yang HE XinYang WANG RongWu QIN XiaoHong YU JianYong Key Laboratory of Textile Science&Technology Ministry of EducationCollege of TextilesDonghua UniversityShanghai 201620China Innovation Center for Textile Science and Technology Donghua UniversityShanghai 201620China

Due to their long-term stability, even under extreme conditions, oxide ceramics have attracted significant attention in emerging fields like moist-electric generation. However, the inherent brittleness and low voltage output of oxide ceramic-based moistelectric generators(MEGs) limit their applications in wearable electronics. Herein, a facile strategy involving the combination of sol-gel electrospinning and calcination is used to fabricate flexible and freestanding Ti O_(2)/Zr O_(2)(TZ) composite nanofiber-based MEGs. The excellent flexibility of the TZ nanofiber membranes can be attributed to the suppression of their crystal structure transformation, dispersion of stress concentration, and reduction of crack propagation via interfacial engineering. The porous structure of the electrospun nanofiber membrane features an abundance of charged narrow channels for the diffusion of water molecules and generates a streaming potential. The optimal voltage output reached ~0.8 V, which is the highest value reported for an oxide ceramic-based MEG. Furthermore, the as-fabricated nanofiber-based MEG exhibits good self-cleaning capability to degrade organic pollutants under ultraviolet irradiation. By integrating mechanical flexibility, high performance, and a selfcleaning effect, this work presents a new idea for exploring diverse, efficient, and wearable oxide ceramic-based MEGs.

关键词： moist-electric generation ceramic nanofiber electrospinning flexible self-cleaning

基于蝶翅三级微纳米结构的定制光子工程辐射制冷纺织品

在线全文

学校读者我要写书评

暂无评论

Engineering 2023年第12期31卷 120-126页

作者： Hongyu Guo Tianye Niu jianyong yu Xueli Wang Yang Si State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of TextilesDonghua UniversityShanghai 201620China Innovation Center for Textile Science and Technology Donghua UniversityShanghai 201620China

People could potentially mitigate heat discomfort when outdoors by combining passive radiative cooling(PRC)strategies with personal thermal management techniques.However,most current PRC materials lack wearing comfort and durability.In this study,a microarray technique is applied to fabricate the tailoring photonic-engineered textiles with intriguing PRC capability and appealing wearability.The developed radiative cooling textiles(RCTs)demonstrate appropriate air-moisture permeability,structural stability,and extended spectroscopic response with high sunlight reflectivity(91.7%)and robust heat emissivity(95.8%)through the atmospheric transparent spectral window(ATSW).In a hot outdoor cooling test,a skin simulator covered by the RCTs displays a temperature drop of approximately 4.4℃at noon compared with cotton textiles.The evolution of our mimetic structures may provide new insights into the generation of wearable,thermal-wet comfortable,and robust textiles for exploring PRC techniques in personal thermal management applications.

关键词： Biomimetic materials Personal thermal management Textiles Passive radiative cooling

From 1D Nanofibers to 3D Nanofibrous Aerogels: A Marvellous Evolution of Electrospun SiO_(2) Nanofibers for Emerging Applications

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2022年第12期14卷 40-78页

作者： Cheng Liu Sai Wang Ni Wang jianyong yu Yi-Tao Liu Bin Ding Innovation Center for Textile Science and Technology College of TextilesDonghua UniversityShanghai 201620People’s Republic of China

One-dimensional(1D)SiO_(2) nanofibers(SNFs),one of the most popular inorganic nanomaterials,have aroused widespread attention because of their excellent chemical stability,as well as unique optical and thermal characteristics.Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures,manageable dimensions,and modifiable properties,which hold great potential in many cutting-edge applications including aerospace,nanodevice,and energy.In this review,substantial advances in the structural design,controllable synthesis,and multifunctional applications of electrospun SNFs are highlighted.We begin with a brief introduction to the fundamental principles,available raw materials,and typical apparatus of electrospun SNFs.We then discuss the strategies for preparing SNFs with diverse structures in detail,especially stressing the newly emerging three-dimensional SiO_(2) nanofibrous aerogels.We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement.In addition,we showcase recent applications enabled by electrospun SNFs,with particular emphasis on physical protection,health care and water treatment.In the end,we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.

关键词： SiO_(2)nanofibers Nanofibrous aerogels Structural design Mechanical reinforcement Multifunctional applications

A General Strategy to Electrospin Nanofibers with Ultrahigh Molecular Chain Orientation

在线全文

学校读者我要写书评

暂无评论

Engineering 2023年第10期29卷 179-187页

作者： Xian Wen Jian Xiong Zhaoyang Sun Liming Wang jianyong yu Xiaohong Qin Key Laboratory of Textile Science and Technology Ministry of EducationCollege of TextilesDonghua UniversityShanghai 201620China State Key Laboratory for Modification of Chemical Fibers and Polymer Materials Donghua UniversityShanghai 201620China Innovation Center for Textile Science and Technology Donghua UniversityShanghai 201620China

The degree of polymer chain orientation is a key structural parameter that determines the mechanical and physical properties of fibers.However,understanding and significantly tuning the orientation of fiber macromolecular chains remain elusive.Herein,we propose a novel electrospinning technique that can efficiently modulate molecular chain orientation by controlling the electric field.In contrast to the typical electrospinning method,this technique can piecewise control the electric field by applying high voltage to the metal ring instead of the needle.Benefiting from this change,a new electric field distribution can be realized,leading to a non-monotonic change in the drafting force.As a result,the macromolecular chain orientation of polyethylene oxide(PEO)nanofibers was significantly improved with a recordhigh infrared dichroic ratio.This was further confirmed by the sharp decrease in the PEO jet fineness of approximately 80%and the nanofiber diameter from 298 to 114 nm.Interestingly,the crystallinity can also be adjusted,with an obvious drop from 74.9%to 31.7%,which is different from the high crystallinity caused by oriented chains in common materials.This work guides a new perspective for the preparation of advanced electrospun nanofibers with optimal orientation–crystallinity properties,a merited feature for various applications.

关键词： Molecular orientation Electrospinning Nanofibers Electric field Polyethylene oxide

Smart Fibers for Self‑Powered Electronic Skins

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advanced Fiber Materials 2023年第2期5卷 401-428页

作者： Xiaoshuang Lv Yang Liu jianyong yu Zhaoling Li Bin Ding Shanghai Frontier Science Research Center for Modern Textiles College of TextilesDonghua UniversityShanghai 201620China College of Information Science and Technology Donghua UniversityShanghai 201620China Innovation Center for Textile Science and Technology Donghua UniversityShanghai 200051China

Smart fibers are considered as promising materials for the fabrication of wearable electronic skins owing to their features such as superior flexibility,light weight,high specific area,and ease of modification.Besides,piezoelectric or triboelectric electronic skins can respond to mechanical stimulation and directly convert the mechanical energy into electrical power for self-use,thereby providing an attractive method for tactile sensing and motion perception.The incorporation of sensing capabilities into smart fibers could be a powerful approach to the development of self-powered electronic skins.Herein,we review several aspects of the recent advancements in the development of self-powered electronic skins constructed with smart fibers.The summarized aspects include functional material selection,structural design,pressure sensing mechanism,and proof-to-concept demonstration to practical application.In particular,various fabrication strategies and a wide range of practical applications have been systematically introduced.Finally,a critical assessment of the challenges and promising perspectives for the development of fiber-based electronic skins has been presented.

关键词： Smart fibers Electronic skins Self-power Piezoelectric effect Triboelectric effect

Reconfiguration and self-healing integrated Janus electrospinning nanofiber membranes for durable seawater desalination

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2023年第1期16卷 489-495页

作者： Huijie Liu Jiatai Gu Ye Liu Lei Yang Liming Wang jianyong yu Xiaohong Qin Key Laboratory of Textile Science&Technology of Ministry of Education College of TextilesDonghua UniversityShanghai 201620China State Key Laboratory for Modification of Chemical Fibers and Polymer Materials International Joint Laboratory for Advanced Fiber and Lowdimension MaterialsCollege of Materials Science and EngineeringDonghua UniversityShanghai 201620China Innovation Center for Textile Science and Technology Donghua UniversityShanghai 201620China

Janus electrospinning nanofiber membranes have attracted extensive attention in the fields such as solar-driven interfacial desalination,liquid filtration,and waterproof and breathable fabrics.However,the Janus structures suffer from weak interfacial bonding and vulnerability to damage,making the durability and sustainability are highly sought after in real-word applications.Herein,we fabricate the simply reconfigurable and entirely self-healing Janus evaporator by electrospinning polypropylene glycol based polyurethane(PPG@PU)and polydimethylsiloxane based polyurethane-CNTs(PDMS@PU-CNTs)with different wettability,which are both designed based on dynamic Diels–Alder(DA)bond.The interface of the Janus membrane is stitched by the covalent bonds to directly improve the interface adhesion to 22 N·m−1,constructing an integrated evaporator,and thereby achieving a stable desalination rate of 1.34 kg·m−2·h−1 under one sun.Reversible dissociation of DA networks allows the evaporators for self-healing and reconfiguration abilities,after which the photothermal performance is maintained.This is the first work for the crosslinked self-healing polymer to be directly electrospun,achieving the improved interfacial bond and reconfiguration of entire evaporators,which presented promising new design principles and materials for interfacial solar seawater desalination.

关键词： Janus nanofiber membrane electrospinning interfacial bonding solar steam generation seawater desalination

Continuous flow synthesis of porous materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2020年第6期31卷 1448-1461页

作者： yu Xin Sheng Peng Junxing Chen Zujin Yang jianyong Zhang MOE Laboratory of Polymeric Composite and Functional Materials School of Materials Science and EngineeringSun Yat-sen UniversityGuangzhou 510275China

Porous materials play an important role in chemical catalysis,separation and other industrial applications.High-efficiency preparation of porous materials has become an active research area.Conventional synthesis of porous materials has been dominated by one-pot solution processing conditions carried out by bulk mixing under conventional electric heating via hydrothermal,solvothermal or ionothermal reactions where high temperatures and pressures are the standard.Continuous flow synthesis has many key advantages in terms of efficient mass and heat transfer,precise control of residence times,improved opportunities for automation and feedback control of synthesis,scaling-up reactions and improved safety parameters compared to above mentioned conventional batch scale synthetic methods.In this review,continuous flow synthesis of various crystalline porous materials such as metal-organic frameworks(MOFs),covalent-organic frameworks(COFs),porous organic cages and zeolites is discussed.Combination of microfluidic methods with other techniques are also shown including various heating ways and various methods of substrate adding.

关键词： Porous materials Continuous flow Metal-organic frameworks Zeolites Covalent-organic frameworks

Diphylleia Grayi-Inspired Intelligent Temperature-Responsive Transparent Nanofiber Membranes

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第4期16卷 67-78页

作者： Cengceng Zhao Gaohui Liu Yanyan Lin Xueqin Li Na Meng Xianfeng Wang Shaoju Fu jianyong yu Bin Ding Shanghai Frontier Science Research Center of Advanced Textiles College of TextilesDonghua UniversityShanghai 201620People’s Republic of China

Nanofiber membranes(NFMs) have become attractive candidates for next-generation flexible transparent materials due to their exceptional flexibility and breathability. However, improving the transmittance of NFMs is a great challenge due to the enormous reflection and incredibly poor transmission generated by the nanofiber-air interface. In this research, we report a general strategy for the preparation of flexible temperature-responsive transparent(TRT) membranes,which achieves a rapid transformation of NFMs from opaque to highly transparent under a narrow temperature window. In this process, the phase change material eicosane is coated on the surface of the polyurethane nanofibers by electrospray technology. When the temperature rises to 37 ℃, eicosane rapidly completes the phase transition and establishes the light transmission path between the nanofibers, preventing light loss from reflection at the nanofiber-air interface. The resulting TRT membrane exhibits high transmittance(> 90%), and fast response(5 s). This study achieves the first TRT transition of NFMs, offering a general strategy for building highly transparent nanofiber materials, shaping the future of next-generation intelligent temperature monitoring, anti-counterfeiting measures, and other high-performance devices.

关键词： Biomimetic Transparent Nanofibrous membrane Temperature response Phase change materials