检索结果-南通市图书馆

Bonding Interface Imaging and Shear Strength Prediction by Ultrasound1

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics Letters 2010年第6期27卷 118-121页

作者： LI Yong-An MAO Jie LI Ming-Xuan WANG xiao-Min AN zhi-wu ZHUANG Qiao State Key Laboratory of Acoustics Institute of Acoustics Chinese Academy of Sciences Beijing 100190

The propagation of a longitudinal ultrasonic wave normally incident upon an adhesively bonded structure is stud- ied. The structure consists of adherend and adhesive layers with finite thickness. Interfaces between adherend and adhesive are regarded as distributed springs. Theoretical and experimental results show that resonant frequencies of the bonded structure vary sensitively with the interface stiffness constants and adhesive thickness, and these interface characteristics are inversed by the simulation annealing （SA） method. Furthermore, the distribution image of interface stiffnesses is compared with the state of fracture interface, and quantitative prediction of shear strength is achieved based on the distribution of interface stiffnesses and adhesive thicknesses by using a back- propagation neutral network. The average relative error of the shear strength from prediction to real value is 10.7%.

关键词： Ultrasonics Fractures Waves Adhesives Ultrasound imaging Numerical simulations

Energy investigations on the mechanical properties of magnesium alloyed by X = C, B, N, O and vacancy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Materials Science 2013年第4期7卷 405-412页

作者： xiao-zhi wu LI-Li LIU Rui WANG Li-Yong GAN Qing LIU National Engineering Research Center for Magnesium Alloys Chongqing University Chongqing 400044 China College of Materials Science and Engineering Chongqing University Chongqing 400044 China College of Physics and Institute for Structure and Function Chongqing University Chongqing 401331 China Physical Sciences and Engineering Division KAUST 23955-6900 Saudi Arabia

The generalized stacking fault （GSF） energies and surface energies of magnesium and its alloys with alloying atoms X- C, B, N, O and vacancy have been investigated using the first-principles methods. It is found that the predominant reducing effects of the alloying atoms and vacancy on the stacking fault energy are resulted from the position of them in the 1st layer near the slip plane. The stacking fault energies are nearly the same as the pure magnesium while the alloying atoms and vacancy are placed in the 2nd, 3rd, 4th, 5th and 6th layers. It has been shown that O strongly reduces the GSF energy of Mg. The alloying atoms C, B and N increase the surface energy, but O and vacancy reduce the surface energy of Mg. The ductilities of Mg and Mg alloys have been discussed based on the Rice criterion by using the ratio between surface energy and unstable stacking fault energy.

关键词： magnesium stacking fault energy surface energy Rice criterion

Improvement of the Injection and Transport Characteristics of Electrons in Organic Light-Emitting Diodes by Utilizing a NaC1 N-Doped Layer

在线全文

学校读者我要写书评

暂无评论

Chinese Physics Letters 2014年第4期31卷 178-181页

作者： xiao zhi-Hui wu xiao-Ming HUA Yu-Lin WANG Li BI Wen-Tao BAI Juan-Juan MU Xue YIN Shou-Gen School of Materials Science and Engineering Tianjin University of Technology Tianjin 300384Key Laboratory of Display Materials and Photoelectric Devices .Ministry of Education Tianjin 300384 Tianjin Key Laboratory of Photoelectric Materials and Devices Tianjin 300384

The injection and transport characteristics of electrons are enhanced by using sodium chloride （NaC1） as an n-type dopant doped into a 4, 7-diphnenyl-1, lO-phe-nanthroline （Bphen） electron-transporting layer, which improves the performance of organic light-emitting diodes （OLEDs）. Meanwhile, a NaCl-doped Bphen layer can effectively influence electrical characteristics of the devices, and significantly improve the current and power efficiency. The turn-on voltage and the operation voltage of the optimal device are decreased drastically from 6.5 V and 10.8 V to 3.3 V and 5 V, respectively, compared with those of the reference device. The maximum current efficiency and power efficiency of the optimal device are 7.0 cd/A and 4.4 Im/W at the current density of 16.70 mA/cm~, which are about I. 7 and 4 times higher than those of the reference device, respectively. Moreover, the enhancement of the injection and transport ability for electrons is attributed not only to the reduced energy barrier between A1 cathode and Bphen, but also to the increased mobility of electrons by the doping effect of NaCl. Therefore, both the electron injection and transport ability are enhanced, which improve the carrier balance in OLEDs and lead to the better device efficiency.

关键词： ORGANIC light emitting diodes SALT DOPING agents (Chemistry) ENERGY consumption ELECTRON mobility

Study of the Lift Force Induced by An Interceptor on A High-Speed Mono-Hull:The Affecting Factors and Estimation Formula

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第4期38卷 557-571页

作者： DENG Rui HU Yu-xiao HUANG Si-chong SONG zhi-jie WANG Shi-gang wu Tie-cheng School of Ocean Engineering and Technology Sun Yat-sen Universityand Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)Zhuhai 519082China

To find a better way to estimate the lift force induced by an interceptor on a high-speed mono-hull ship,a series of high-speed mono-hull ship models are designed and investigated under different *** lift forces are obtained by numerical calculations and validated by a model test in a towing *** factors that influence the force are the interceptor height,velocity,draft,and deadrise *** relationship between each factor and the induced lift force is investigated and *** found that the induced lift mainly depends on the interceptor height and advancing velocity,and is proportional to the square of the interceptor height and *** results also showed that the effects of the draft and deadrise angle are relatively less important,and the relationship between the induced lift and these two factors is generally *** on the results,a formula including the combined effect of all factors used to estimate the lift force induced by the interceptor is developed based on systematic *** proposed formula could be used to estimate the lift force induced by interceptors,especially under high-speed condition.

关键词： high-speed mono-hull ship interceptor lift force formula lift force towing tank test computational fluid dynamics

Ballistic performances of the hourglass lattice sandwich structures under high-velocity fragments

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 312-325页

作者： He-xiang wu Jia Qu Lin-zhi wu Key Laboratory of Advanced Ship Materials and Mechanics College of Aerospace and Civil EngineeringHarbin Engineering UniversityHarbin150001China School of Civil Engineering Northeast Forestry UniversityHarbin150040China

In this paper,the numerical simulation method is used to study the ballistic performances of hourglass lattice sandwich structures with the same mass under the vertical incidence of *** is paid to elucidating the influences of rod cross-section dimensions,structure height,structure layer,and rod inclination angle on the deformation mode,ballistic performances,and ability to change the ballistic direction of *** results show that the ballistic performances of hourglass lattice sandwich structures are mainly affected by their structural *** this respect,structural parameters optimization of the hourglass lattice sandwich structures enable one to effectively improve their ballistic limit velocity and,consequently,ballistic performances.

关键词： Hourglass lattice sandwich structures Ballistic performances high-velocity Finite element analysis

How incubation temperature affects hatchling performance in reptiles: an integrative insight based on plasticity in metabolic enzyme

在线全文

学校读者我要写书评

暂无评论

Current Zoology 2024年第2期70卷 195-203页

作者： Dan-Yang wu Xing-zhi Han Teng Li Bao-Jun Sun xiao-Yan Qin College of Life and Environment Sciences Minzu University of ChinaBeijing 100081China Key Laboratory of Animal Ecology and Conservational Biology Institute of ZoologyChinese Academy of SciencesBeijing 10011China College of Wildlife and Protected Area Northeast Forestry UniversityHarbin 150040China College of Resources and Environmental Sciences Nanjing Agricultural UniversityNanjing 210095China

Evaluating the effects of temperature variations on animals plays an important role in understanding the threat of climate *** effects of developmental temperature on offspring performance are critical in evaluating the effects of warming temperatures on the fitness of ovipa-rous species,but the physiological and biochemical basis of this developmental plasticity is largely *** this study,we incubated eggs of the turtle Pelodiscus sinensis at low(24℃),medium(28℃),and high(32℃)temperatures,and evaluated the effects of developmental temperature on offspring fitness,and metabolic enzymes in the neck and limb muscles of *** hatchlings from eggs incubated at the medium temperature showed better fitness-related performance(righting response and swimming capacity)and higher activities of metabolic enzymes(hexokinase,HK;lactate dehydrogenase,LDH)than hatchlings from the eggs incubated at high or low *** addition,the swimming speed and righting response were significantly correlated with the HK activities in limb(swimming speed)and neck(righting response)muscles,suggesting that the developmental plasticity of energy metabolic pathway might play a role in determining the way incubation temperature affects offspring *** the fitness-related performance and the activities of metabolic enzymes,we predict that the P sinensis from high latitude would not face the detrimental effects of climate warming until the average nest temperatures reach 32℃.

关键词： developmental plasticity energetic metabolism enzyme activity hatchling turtle.

Influence of oxygen-rich hot air composite gas medium on sintering performance and function mechanism

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1071-1081页

作者： Min Gan Hao-xiang Zheng xiao-hui Fan zhi-yun Ji Qiang Li Ming wu Yi-fan Wang xiao-long Wang Yu-feng wu Xu-ling Chen Zeng-qing Sun xiao-xian Huang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina Shanxi Taigang Stainless Steel Co. Ltd.Taiyuan030003ShanxiChina

Hot air sintering technology is used to improve the quality and production efficiency of sintered ***,the current thick layer condition highlights the disadvantage of the low oxygen potential of the hot air sintering ***,it is considered to use oxygen enrichment sintering to improve the environment of hot air *** sintering,hot air sintering,and oxygen-rich hot air sintering were compared through sintering cup experiments,and the influence of hot air and oxygen-rich hot air on sintering indexes was *** air reduced the vertical sintering velocity,while improved the yield and tumbler ***-rich hot air sintering contributed to improving the vertical sintering velocity while ensuring the quality of sintered ore,thus comprehensively improving production *** the action of hot air,the highest temperature of the sintering layer increased and the high-temperature holding time was *** oxygen enrichment,the combustion efficiency of fuels in the upper layer of materials was promoted,which optimized heat distribution in the middle and lower layers of materials and increased the content of calcium ferrite in the sintered ore,thus strengthening the sintering process.

关键词： Iron ore sintering Hot air sintering Oxygen enrichment Function mechanism

Gene therapy for monogenic disorders: challenges, strategies, and perspectives

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Genetics and Genomics 2024年第2期51卷 133-143页

作者： Yi Zhang zhi-Ying wu Department of Medical Genetics and Center for Rare Diseases Second Affiliated HospitalZhejiang University School of MedicineHangzhouZhejiang 310009China Department of Neurology Second Affiliated HospitalZhejiang University School of MedicineHangzhouZhejiang 310009China Key Laboratory of Medical Neurobiology of Zhejiang Province HangzhouZhejiang 310009China

Monogenic disorders refer to a group of human diseases caused by mutations in single genes. While disease-modifying therapies have offered some relief from symptoms and delayed progression for some monogenic diseases, most of these diseases still lack effective treatments. In recent decades, gene therapy has emerged as a promising therapeutic strategy for genetic disorders. Researchers have developed various gene manipulation tools and gene delivery systems to treat monogenic diseases. Despite this progress, concerns about inefficient delivery, persistent expression, immunogenicity, toxicity, capacity limitation, genomic integration, and limited tissue specificity still need to be addressed. This review gives an overview of commonly used gene therapy and delivery tools, along with the challenges they face and potential strategies to counter them.

关键词： Gene therapy Monogenic diseases Geneediting Genedelivery Challenges

Revolution in thermoelectric cooling using PbSe thermoelectrics by grid plainification

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Materials 2024年第5期67卷 1672-1673页

作者： xiao-Lei Shi Qingfeng Liu zhi-Gang Chen School of Chemistry and Physics ARC Research Hub in Zero-emission Power Generation for Carbon Neutralityand Centre for Materials ScienceQueensland University of TechnologyBrisbaneQueensland4000Australia State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical EngineeringNanjing Tech UniversityNanjing211816China

Thermoelectric materials and devices enable direct conversion between heat and electricity,holding potential applications in thermoelectric power generation,localized cooling,and electronic thermal management[1].Howev... 详细信息

关键词： enable thermoelectric constrained