检索结果-南通市图书馆

Chinese Journal of Polymer Science 2024年第1期42卷 63-72,I0008页

作者： Ming-Xuan Chen Jin-Yue Dai Li-Yue Zhang Shuai-Peng Wang Jing-Kai liu Yong-Gang Wu Xin-Wu Ba xiao-qing liu School of Chemistry and Materials Science Hebei UniversityBaoding 071000China Ningbo Institute of Materials Technology and Engineering Chinese Academy of SciencesNingbo 315201China Key Laboratory of Marine Materials and Related Technologies Chinese Academy of SciencesNingbo 315201China

It is of great significance to design epoxy coatings with superior antibacterial properties and high adhesive properties, as well as excellent processing, superior durability, and high transparency. However, it is still a challenge because of the common complex design and synthesis. Herein, the bio-based monomer protocatechuic acid(PCA) was used as raw material, the catechol structure with high bonding and antibacterial properties was introduced into the flexible alkane segment of ethylene glycol diglycidyl ether(EGDE) through an efficient, and green method, and it was cured with isophorone diamine(IPDA) to prepare corresponding thermosets. The cured resins exhibited excellent allaround qualities, particularly in bonding and antibacterial. When 30% PCA was added to pure epoxy resin, the adhesion between substrate and coating increased from 4.40 MPa to 13.60 MPa and the antibacterial rate of coating against E. coli and S. aureus could approach 100%. All of this is due to the fact that the catechol structure present in PCA has the ability to interact with various substrates and alter the permeability of bacterial cell membranes. The architecture of this method offers a fresh approach to dealing with the issues of challenging raw material selection and complex synthesis techniques.

关键词： Epoxy coatings Thermosets Catechol structure Antibacterial High adhesion

Burning Numbers of Barbells

在线全文

学校读者我要写书评

暂无评论

Acta Mathematicae Applicatae Sinica 2024年第2期40卷 526-538页

作者： Hui-qing liu Rui-ting ZHANG xiao-lan HU Hubei Key Laboratory of Applied Mathematics&Faculty of Mathematics and Statistic Hubei UniversityWuhan 430062China Hubei Key Laboratory of Mathematical Sciences&School of Mathematics and Statistics Central China Normal UniversityWuhan 430079China

Motivated by a discrete-time process intended to measure the speed of the spread of contagion in a graph,the burning number b(G)of a graph G,is defined as the smallest integer k for which there are vertices x1,…xk su... 详细信息

关键词： burning number short/long barbell isometric subtree cycle

Analysis of destructive effect of Zn on carbon brick and way of Zn into carbon brick

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第6期31卷 1344-1354页

作者： Peng-bo liu Shu-sen Cheng Yu-qing Xue xiao-man Cheng Zhao liu University of Science and Technology Beijing Beijing 100083China Ministry of Ironmaking Shangdong Taishan Steel Group Co.Ltd.Taian 271000ShandongChina

The service life of a blast furnace depends largely on the degree of damage to the carbon brick in the *** brick and ramming material in the hearth of a 1780 m3 blast furnace after shutdown were sampled and *** was found that the substances in the cracks of the carbon brick near and above the taphole were ZnO and Zn_(2)SiO_(4),whereas the substances in the cracks of the carbon brick below the taphole were *** reaction of Zn with CO,SiO_(2),and Fes generates ZnO,Zn_(2)SiO_(4),and ZnS,resulting in volume expansion,which is an important reason for the cracking of carbon ***,several obvious Zn vapor flow channels were found in the ramming material,through which Zn vapor could enter the carbon brick,causing damage to the carbon *** the compactness of the ramming material is beneficial to preventing Zn vapor from entering the carbon brick through the voids in the ramming material,reducing the destructive effect of Zn on the carbon brick and further extending the service life of the blast furnace.

关键词： Zn Blast furnace Carbon brick Ramming material Crack

Data driven analysis reveals prognostic genes and immunological targets in human sepsis-associated acute kidney injury

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Emergency Medicine 2024年第2期15卷 91-97页

作者： qing Zhao Jinfu Ma Jianguo xiao Zhe Feng Hui liu Department of Diagnosis and Treatment of Cadres the First Medical CenterChinese PLA General HospitalBeijing 100853China Intensive Care Unit the 305th Hospital of Chinese PLABeijing 100032China Department of Critical Care Medicine the First Medical CenterChinese PLA General HospitalBeijing 100853China Nephrology Department the First Medical CenterChinese PLA General HospitalBeijing 100853China

BACKGROUND:The molecular mechanism of sepsis-associated acute kidney injury(SA-AKI)is *** analyzed co-differentially expressed genes(co-DEGs)to elucidate the underlying mechanism and intervention targets of ***:The microarray datasets GSE65682,GSE30718,and GSE174220 were downloaded from the Gene Expression Omnibus(GEO)*** identified the co-DEGs and constructed a gene co-expression network to screen the hub *** analyzed immune correlations and disease correlations and performed functional annotation of the hub *** also performed single-cell and microenvironment analyses and investigated the enrichment pathways and the main transcription ***,we conducted a correlation analysis to evaluate the role of the hub ***:Interleukin 32(IL32)was identified as the hub gene in SA-AKI,and the main enriched signaling pathways were associated with hemopoiesis,cellular response to cytokine stimulus,inflammatory response,and regulation of kidney ***,IL32 was significantly associated with mortality in SA-AKI ***,macrophages,T cells,and NK cells were closely related to IL32 and were involved in the immune microenvironment in SA-AKI ***32 expression increased significantly in the kidney of septic ***-like receptor 2(TLR2)was significantly and negatively correlated with ***:IL32 is the key gene involved in SA-AKI and is significantly associated with ***2 and relevant immune cells are closely related to key genes.

关键词： Sepsis Acute kidney injury Interleukin 32 Toll-like receptor 2 Bioinformatics analysis

Unusual photocarrier and coherent phonon dynamics behaviors of layered PdSe_(2)unveiled by ultrafast spectroscopy of the edge surface

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第8期67卷 143-152页

作者： Tiantian Yun Changfu Huo Jinluo Cheng Zhi-Bo liu xiao-qing Yan Key Laboratory of Weak-Light Nonlinear Photonics Ministry of EducationSchool of PhysicsNankai UniversityTianjin 300071China Collaborative Innovation Center of Extreme Optics Shanxi UniversityTaiyuan 030006China GPL Photonics Laboratory Key Laboratory of Luminescence Science and TechnologyChinese Academy of Sciences&State Key Laboratory of Luminescence Science and ApplicationsChangchun Institute of OpticsFine Mechanics and PhysicsChinese Academy of SciencesChangchun 130033China

Layered materials exhibit different electronic and phonon properties along in-plane and out-of-plane directions;existing studies focus on their in-plane behaviors,and the influence of such anisotropies on the dynamics of photocarriers and phonons is ***,we fabricate layered PdSe_(2)crystals with flat edge surfaces and compare the time-resolved ultrafast spectroscopies on their basal and edge *** differences in the transient reflection spectroscopies reveal the inconsistent photocarrier and phonon dynamics behaviors on the two surfaces:the slow hot carrier relaxation process is accelerated and the thermoelasticity-induced longitudinal coherent acoustic phonon oscillation completely vanishes on the edge surface,as compared with the basal *** analysis reveals that the inconsistent hot carrier dynamics originate from the anisotropic properties of low-energy phonons in PdSe_(2),and the absence of phonon oscillation on the edge surface results from the wavevector-limited sensitivity of acoustic B_(1u)***,polarization-dependent spectroscopies indicate the diverse optical anisotropies beyond the in-plane of PdSe_(2).This work provides a new method to explore unique physical properties and modulate the optical anisotropy of layered materials.

关键词： PdSe_(2) ultrafast spectroscopy edge surface carrier dynamics coherent phonon oscillation anisotropy

Significantly Enhanced Energy Storage Performances of PEI-based Composites Utilizing Surface Functionalized ZrO_(2) Nanoparticles for High-Temperature Application

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第3期42卷 322-332,I0006页

作者： qing-qing liu Qiu-Hao Lin xiao-Dong Qi Nan Zhang Ting Huang Jing-Hui Yang Yong Wang School of Chemistry Southwest Jiaotong UniversityChengdu 610031China Key Laboratory of Advanced Technologies of Materials Ministry of Education of ChinaSouthwest Jiaotong UniversityChengdu 610031China

Polymer dielectrics with a high energy density and an available energy storage capacity have been playing an important role in advanced electronics and power systems. Nevertheless, the use of polymer dielectrics in harsh environments is limited by their low energy density at high temperatures. Herein, zirconium dioxide(ZrO_(2)) nanoparticles were decorated with amino group utilizing 4,4-methylenebis(phenyl isocyanate)(AMEO) and successfully incorporated into polyetherimide(PEI) matrix. The dielectric properties, breakdown strength, and energy storage performances of PEI/ZrO_(2)-AMEO nanocomposites were investigated from 25 ℃ to 150 ℃. It is found that the combination of moderate bandgap ZrO_(2) with modest dielectric constant and polar groups at interface with deep trap can offer an available strategy to simultaneously increase the dielectric constant and breakdown strength of polymer dielectrics. As a result, the composites containing ZrO_(2)-AMEO exhibit excellent energy storage performance at elevated temperatures. Specially, the PEI-based composites with 3 vol% ZrO_(2)-AMEO display a maximum discharged energy density(U_(d)) of 3.1 J/cm^(3) at 150 ℃, presenting 90% higher than that of neat PEI. This study may help to better develop the polymer-based dielectric composite applied at elevated temperatures.

关键词： Polyetherimide High temperature dielectric ZrO_(2) Interface

Bioinspired design of integral molded Janus silk fibroin-MXene evaporator for efficient solar vapor generation

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2824-2835页

作者： Ling-qing Kong Zhi-Cheng Zeng Guang-Zong Min Zhao-Hui Meng Guo-qing Meng xiao-xiao Guo Nai-Bo Lin Xiang-Yang liu The Higher Educational Key Laboratory for Biomedical Engineering of Fujian Province Research Center of Biomedical Engineering of XiamenDepartment of BiomaterialsCollege of MaterialsXiamen UniversityXiamen 361005China The State Key Laboratory of Marine Environmental Science(MEL) College of Ocean and Earth SciencesXiamen UniversityXiamen 361005China

Solar vapor generation is a promising sustainable technology that uses solar distillation to produce fresh water from seawater and wastewater,helping relieve global water resource ***,inspired by naturally grown integrally molded mulberry leaves with a Janus hydrophilic and hydrophobic structure,a novel,simple,and efficient integrated molding method is proposed to break through the limitations of the traditional split manufacturing strategy and realizes the integrated formation of Janus *** on the spontaneous sedimentation characteristics of MXene in silk fibroin solution and its regulation of mesoscopic structure and hydrophilicity of silk fibroin,layered structures with different compositions and hydrophilicities were obtained in one ***,ethanol and glutaraldehyde were added to construct a physical crystallization-chemical crosslinking dual stabilization structure in silk *** evaporator has the evaporation rate of 3.07 kg·m^(-2)·h^(-1) and the efficiency of 86.8%under 1 sun and maintains high evaporation performance under various extreme test conditions including vigorous washing,repeated compression,and high-intensity ultraviolet(UV)***,the evaporator performs well in practical application scenarios,its evaporation rate in the simulated Dead Sea seawater exceeds 2.13 kg·m^(-2)·h^(-1),and more than 99.9%of the salt,heavy metal ions,oil pollution,and dyes are purified.

关键词： silk fibroin MXene bioinspired integrated molding Janus structure solar vapor generation

Effects of acid-rock reaction on physical properties during CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)injection in shale reservoirs

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 272-285页

作者： Yi-Fan Wang Jing Wang Hui-qing liu xiao-Cong Lv Ze-Min Ji National Key Laboratory of Petroleum Resources and Engineering China University of PetroleumBeijing102249China MOE Key Laboratory of Petroleum Engineering China University of PetroleumBeijing102249China Research Institute of Exploration and Development PetroChinaBeijing100083China

"Carbon peaking and carbon neutrality"is an essential national strategy,and the geological storage and utilization of CO_(2)is a hot issue ***,due to the scarcity of pure CO_(2)gas sources in China and the high cost of CO_(2)capture,CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)is gradually emerging into the public's ***_(2)has good adsorption properties on shale surfaces,but acidic gases can react with shale,so the mechanism of the CO_(2)-rich IWG-water-shale reaction and the change in reservoir properties will determine the stability of geological ***,based on the mineral composition of the Longmaxi Formation shale,this study constructs a thermodynamic equilibrium model of water-rock reactions and simulates the regularity of reactions between CO_(2)-rich IWG and shale *** results indicate that CO_(2)consumed 12%after reaction,and impurity gases in the CO_(2)-rich IWG can be dissolved entirely,thus demonstrating the feasibility of treating IWG through water-rock *** IWG inhibits the dissolution of CO_(2),the optimal composition of CO_(2)-rich IWG is 95%CO_(2)and 5%IWG when CO_(2)geological storage is the main *** contrast,when the main goal is the geological storage of total CO_(2)-rich IWG or impurity gas,the optimal CO_(2)-rich IWG composition is 50%CO_(2)and 50%*** the CO_(2)-rich IWG-water-shale reaction,temperature has less influence on the water-rock reaction,while pressure is the most important ***2 has the greatest impact on water-rock reaction in *** minerals,clay minerals such as illite and montmorillonite had a significant effect on water-rock *** overall reaction is dominated by precipitation and the volume of the rock skeleton has increased by 0.74 cm3,resulting in a decrease in shale porosity,which enhances the stability of CO_(2)geological storage to some *** the reaction between CO_(2)-rich IWG-water-shale at simulated temperatures and pressures,precipitation

关键词： CO_(2)-rich industrial waste gas Geological storage Acid-rock reaction Shale Geochemical modelling

Pyruvate kinase M in germ cells is essential for sperm motility and male fertility but not spermatogenesis

在线全文

学校读者我要写书评

暂无评论

Asian Journal of Andrology 2024年第2期26卷 212-219页

作者： Gao-qing Qian xiao-Chen Wang Xi Zhang Bin Shen Qiang liu State Key Laboratory of Reproductive Medicine and Offspring Health Nanjing Medical UniversityNanjing 211166China Shanghai Key Laboratory of Reproductive Medicine Department of HistoembryologyGenetics and Developmental BiologyShanghai Jiao Tong University School of MedicineShanghai 200025China State Key Laboratory of Molecular Biology Shanghai Key Laboratory of Molecular AndrologyShanghai Institute of Biochemistry and Cell BiologyCenter for Excellence in Molecular Cell ScienceChinese Academy of SciencesUniversity of Chinese Academy of SciencesShanghai 200031China

Male germ cells employ specific metabolic pathways throughout their developmental *** a previous study,we discovered heightened expression of pyruvate kinase M(PKM),a pivotal glycolytic enzyme,in spermatogonia and *** gain deeper insights into PKM's roles in spermatogenesis,sperm function,and male fertility,we engineered a conditional-knockout mouse model(Pkm-vkO mice)to selectively disrupt the Pkm gene within germ *** maintaining regular testicular histology and sperm morphology,the male Pkm-vko mice were infertility,characterized by significant impairments in sperm motility and adenosine triphosphate(ATP)*** addition,Pkm-null spermatozoa exhibited similar deficits in protein tyrosine phosphorylation linked to capacitation,as well as compromised performance in in vitro fertilization *** conclude,PKM's presence is not obligatory for the entirety of spermatogenesis in male germ cells;however,it emerges as a critical factor influencing sperm motility and overall male fertility.

关键词： glycolysis male fertility pyruvate kinase M sperm motility spermatogenesis

A Comparative Study on the Post-Buckling Behavior of Reinforced Thermoplastic Pipes(RTPs)Under External Pressure Considering Progressive Failure

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第2期38卷 233-246页

作者： DING Xin-dong WANG Shu-qing liu Wen-cheng YE xiao-han College of Engineering Ocean University of ChinaQingdao 266100China Shandong Provincial Key Laboratory of Ocean Engineering Ocean University of ChinaQingdao 266100China Department of Marine Technology Norwegian University of Science and Technology(NTNU)Trondheim NO-7491Norway

The collapse pressure is a key parameter when RTPs are applied in harsh deep-water *** investigate the collapse of RTPs,numerical simulations and hydrostatic pressure tests are *** the numerical simulations,the eigenvalue analysis and Riks analysis are combined,in which the Hashin failure criterion and fracture energy stiffness degradation model are used to simulate the progressive failure of composites,and the“infinite”boundary conditions are applied to eliminate the boundary *** for the hydrostatic pressure tests,RTP specimens were placed in a hydrostatic chamber after filled with *** has been observed that the cross-section of the middle part collapses when it reaches the maximum *** collapse pressure obtained from the numerical simulations agrees well with that in the ***,the applicability of NASA SP-8007 formula on the collapse pressure prediction was also *** has a relatively greater difference because of the ignorance of the progressive failure of *** the parametric study,it is found that RTPs have much higher first-ply-failure pressure when the winding angles are between 50°and 70°.Besides,the effect of debonding and initial ovality,and the contribution of the liner and coating are also discussed.

关键词： reinforced thermoplastic pipes post-buckling behavior progressive failure of composites debonding initial ovality