检索结果-南通市图书馆

在线全文

学校读者我要写书评

暂无评论

3种不同材料三维模型牙临床应用特点比较

中国口腔颌面外科杂志 2024年第3期22卷 239-244页

作者：李永清张赟惠铄壹惠小勇许广杰杨霞肖伯承侯锐口颌系统重建与再生全国重点实验室国家口腔疾病临床医学研究中心陕西省口腔疾病临床医学研究中心空军军医大学口腔医院口腔颌面外科陕西西安710032 青海大学附属医院口腔颌面外科青海西宁810000 口颌系统重建与再生全国重点实验室国家口腔疾病临床医学研究中心陕西省口腔疾病临床医学研究中心空军军医大学口腔医院口腔正畸科陕西西安710032 解放军火箭军广州特勤疗养中心门诊部广东广州510515 解放军东部战区海军医院口腔科浙江舟山316000

目的:应用口腔数字印模仪结合Mimics 19.0软件,分析3种不同材料三维模型牙的精度,并结合问卷调查比较其理化性能、经济学特点和临床应用特点。方法:对开展自体牙移植技术的医师进行问卷调查,了解其对不同供牙模型材料的认识;然后就各模... 详细信息

目的:应用口腔数字印模仪结合Mimics 19.0软件,分析3种不同材料三维模型牙的精度,并结合问卷调查比较其理化性能、经济学特点和临床应用特点。方法:对开展自体牙移植技术的医师进行问卷调查,了解其对不同供牙模型材料的认识;然后就各模型牙的材料使用性能、工艺性能、经济性、环境协调性等特点进行比较分析。搜集完整拔除的第三磨牙20颗,根据患者术前CBCT数据分别制作聚乳酸、光敏树脂、钴铬合金材料的三维牙模型,使用口腔数字印模仪扫描离体牙及各种材料的模型牙,数据用Mimics 19.0软件进行最佳拟合对齐和三维分析,对所得均方根(root mean square,RMS)误差值进行统计分析,明确精度差别。采用SPSS 22.0软件包对数据进行统计学分析。结果:问卷结果显示,95.2%的口腔医师认为供牙模型在自体牙移植术中用处很大且经常使用,90.5%的口腔医师认为材料成本以及无毒无公害最为重要。常用的3种不同材料的模型牙与第三磨牙的RMS值无统计学差异(P>0.05)。3种材料加工技术成熟、工艺性能良好、使用性能较好,其中聚乳酸价格低廉,兼具生物降解性,操作风险较低;光敏树脂价格中等,但其制造过程可能会产生毒性物质且操作风险较高;钴铬合金耐高温高压,但打印周期较长,成本较高。结论:聚乳酸、光敏树脂、钴铬合金3种材料的模型牙三维精度无显著差异,但综合3种材料模型牙的各种特点,聚乳酸的性价比最高,值得临床推广应用。

关键词：供牙模型 3D打印材料 3D打印技术三维精度

Deflagration and detonation induced by shock wave focusing at different Mach numbers

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 249-258页

作者： Zezhong YANG Jun cheng bo ZHANG School of Aeronautics and Astronautics Shanghai Jiao Tong UniversityShanghai 200240China

Shock wave focusing is an effective way to create a hot spot or a high-pressure and hightemperature region at a certain place,showing its unique usage in detonation initiation,which is beneficial for the development of detonation-based engines.The flame propagation behavior after the autoignition induced by shock wave focusing is crucial to the formation and self-sustaining of the detonation wave.In this study,wedge reflectors with two different angles(60°and 90°)and a planar reflector are employed,and the Mach number of incident shock waves ranging from 2.0 to 2.8 is utilized to trigger different flame propagation modes.Dynamic pressure transducers and the high-speed schlieren imaging system are both employed to investigate the shock-shock collision and ignition procedure.The results reveal a total of four flame propagation modes:deflagration,DDT(Deflagration-to-Detonation Transition),unsteady detonation,and direct detonation.The detonation wave formed in the DDT and unsteady detonation mode is only approximately 75%-85%of the Chapman-Jouguet(C-J)speed;meanwhile,the directly induced detonation wave speed is close to the C-J speed.Transverse waves,which are strong evidence for the existence of detonation waves,are discovered in experiments.The usage of wedge reflectors significantly reduces the initial pressure difference ratio needed for direct detonation ignition.We also provide a practical method for differentiating between detonation and deflagration modes,which involves contrasting the speed of the reflected shock wave with the speed of the theoretically nonreactive reflected shock wave.These findings should serve as a reference for the detonation initiation technique in advanced detonation propulsion engines.

关键词： Deflagration Detonation Hydrogen Ignition Shock wave focusing

Prevalence of hypertension and its associations with body composition across Chinese and American children and adolescents

在线全文

学校读者我要写书评

暂无评论

World Journal of Pediatrics 2024年第4期20卷 392-403页

作者： Li-Wang Gao Yi-Wen Huang Hong cheng Xi Wang Hong-bo Dong Pei xiao Yin-Kun Yan Xin-Ying Shan xiao-Yuan Zhao Jie Mi Center for Non-Communicable Disease Management Beijing Children’s HospitalCapital Medical UniversityNational Center for Children’s HealthNo.56 Nanlishi RoadXicheng DistrictBeijing100045China Department of Epidemiology Capital Institute of PediatricsNo.2 Yabao RoadChaoyang DistrictBeijing100020China Key Laboratory of Major Diseases in Children Ministry of EducationBeijingChina

Background The age of onset of hypertension(HTN)is decreasing,and obesity is a significant risk factor.The prevalence and racial disparities in pediatric HTN and the association between body composition and blood pressure are insufficiently studied.This study aimed to evaluate the prevalence of HTN in Chinese and American children and adolescents and to assess the relationship between various body composition indices and HTN.Methods Seven thousand,five hundred and seventy-three Chinese and 6239 American children and adolescents aged 8–18 years from the 2013–2015 China Child and Adolescent Cardiovascular Health study and the 2011–2018 National Health and Nutrition Examination Surveys were analyzed.Blood pressure and body composition(fat and muscle)were measured by trained staff.The crude prevalence and age-standardized prevalence rate(ASPR)of primary HTN and its subtypes[isolated systolic hypertension(ISH)and isolated diastolic hypertension(IDH)]were calculated based on 2017 American Academy of Pediatrics guidelines.Multivariable-adjusted linear regression coefficients and odds ratios(ORs)were calculated to assess the associations of body composition indicators with HTN,ISH and IDH.Results The ASPR of HTN was 18.5%in China(CN)and 4.6%in the United States(US),whereas the obesity prevalence was 7.4%and 18.6%,and the population attributable risk of HTN caused by overweight and obesity was higher in the US than in CN.Increased fat mass,muscle mass and body fat percentage mass were associated with a higher risk of HTN in both countries.The percent of muscle body mass had a protective effect on HTN and ISH in both countries[HTN(CN:OR=0.83,95%CI=0.78–0.88;US:OR=0.72,95%CI=0.64–0.81);ISH(CN:OR=0.87,95%CI=0.80–0.94;US:OR=0.71,95%CI=0.62–0.81)],and the protective effect was more common among children and adolescents with high levels of physical activity.Conclusions The burden of HTN in Chinese children and adolescents was substantial and much greater than that in the US,and the contribution of obesity to HTN was higher in t

关键词： body composition Children and adolescents China Child and Adolescent Cardiovascular Health Hypertension National Health and Nutrition Examination Surveys

Bioinspired design of integral molded Janus silk fibroin-MXene evaporator for efficient solar vapor generation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2824-2835页

作者： Ling-Qing Kong Zhi-cheng Zeng Guang-Zong Min Zhao-Hui Meng Guo-Qing Meng xiao-xiao Guo Nai-bo Lin Xiang-Yang Liu The Higher Educational Key Laboratory for Biomedical Engineering of Fujian Province Research Center of Biomedical Engineering of XiamenDepartment of BiomaterialsCollege of MaterialsXiamen UniversityXiamen 361005China The State Key Laboratory of Marine Environmental Science(MEL) College of Ocean and Earth SciencesXiamen UniversityXiamen 361005China

Solar vapor generation is a promising sustainable technology that uses solar distillation to produce fresh water from seawater and wastewater,helping relieve global water resource shortage.Here,inspired by naturally grown integrally molded mulberry leaves with a Janus hydrophilic and hydrophobic structure,a novel,simple,and efficient integrated molding method is proposed to break through the limitations of the traditional split manufacturing strategy and realizes the integrated formation of Janus evaporator.Based on the spontaneous sedimentation characteristics of MXene in silk fibroin solution and its regulation of mesoscopic structure and hydrophilicity of silk fibroin,layered structures with different compositions and hydrophilicities were obtained in one step.Meanwhile,ethanol and glutaraldehyde were added to construct a physical crystallization-chemical crosslinking dual stabilization structure in silk fibroin.Our evaporator has the evaporation rate of 3.07 kg·m^(-2)·h^(-1) and the efficiency of 86.8%under 1 sun and maintains high evaporation performance under various extreme test conditions including vigorous washing,repeated compression,and high-intensity ultraviolet(UV)irradiation.Additionally,the evaporator performs well in practical application scenarios,its evaporation rate in the simulated Dead Sea seawater exceeds 2.13 kg·m^(-2)·h^(-1),and more than 99.9%of the salt,heavy metal ions,oil pollution,and dyes are purified.

关键词： silk fibroin MXene bioinspired integrated molding Janus structure solar vapor generation

Main controlling factor and mechanism of gas-in-place content of the Lower Cambrian shale from different sedimentary facies in the western Hubei area, South China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1488-1507页

作者： Gang Li Xian-Ming xiao bo-Wei cheng Chen-Gang Lu Yue Feng Dong-Sheng Li School of Energy Resources China University of Geosciences (Beijing) Frontiers Science Center for Deep-time Digital Earth China University of Geosciences (Beijing)

The Lower Cambrian shale gas in the western Hubei area, South China has a great resource prospect, but the gas-in-place（GIP） content in different sedimentary facies varies widely, and the relevant mechanism has been not well understood. In the present study, two sets of the Lower Cambrian shale samples from the Wells YD4 and YD5 in the western Hubei area, representing the deep-water shelf facies and shallowwater platform facies, respectively, were investigated on the differences of pore types, pore structure and methane adsorption capacity between them, and the main controlling factor and mechanism of their methane adsorption capacities and GIP contents were discussed. The results show that the organic matter（OM） pores in the YD4 shale samples are dominant, while the inorganic mineral（IM） pores in the YD5 shale samples are primary, with underdeveloped OM pores. The pore specific surface area（SSA） and pore volume（PV） of the YD4 shale samples are mainly from micropores and mesopores, respectively,while those of the YD5 shale samples are mainly from micropores and macropores, respectively. The methane adsorption capacity of the YD4 shale samples is significantly higher than that of the YD5 shale samples, with a maximum absolute adsorption capacity of 3.13 cm3/g and 1.31 cm3/g in average,respectively. Compared with the shallow-water platform shale, the deep-water shelf shale has a higher TOC content, a better kerogen type and more developed OM pores, which is the main mechanism for its higher adsorption capacity. The GIP content models based on two samples with a similar TOC content selected respectively from the Wells YD4 and YD5 further indicate that the GIP content of the deep-water shelf shale is mainly 3 4 m3/t within a depth range of 1000—4000 m, with shale gas exploration and development potential, while the shallow-water platform shale has normally a GIP content of <1 m3/t,with little shale gas potential. Considering the geological and geochemical conditions of shale gas formation and preservation, the deep-w

关键词： Lower Cambrian shale Deep-water shelf facies Shallow-water platform facies Pore structure Methane adsorption Gas-in-place content Controlling factor

Working condition recognition of sucker rod pumping system based on 4-segment time-frequency signature matrix and deep learning

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 641-653页

作者： Yun-Peng He Hai-bo cheng Peng Zeng Chuan-Zhi Zang Qing-Wei Dong Guang-Xi Wan xiao-Ting Dong State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016LiaoningChina Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110016LiaoningChina Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169LiaoningChina University of Chinese Academy of Sciences Beijing100049China School of Artifcial Intelligence Shenyang University of TechnologyShenyang 110870LiaoningChina

High-precision and real-time diagnosis of sucker rod pumping system(SRPS)is important for quickly mastering oil well operations.Deep learning-based method for classifying the dynamometer card(DC)of oil wells is an efficient diagnosis method.However,the input of the DC as a two-dimensional image into the deep learning framework suffers from low feature utilization and high computational effort.Additionally,different SRPSs in an oil field have various system parameters,and the same SRPS generates different DCs at different moments.Thus,there is heterogeneity in field data,which can dramatically impair the diagnostic accuracy.To solve the above problems,a working condition recognition method based on 4-segment time-frequency signature matrix(4S-TFSM)and deep learning is presented in this paper.First,the 4-segment time-frequency signature(4S-TFS)method that can reduce the computing power requirements is proposed for feature extraction of DC data.Subsequently,the 4S-TFSM is constructed by relative normalization and matrix calculation to synthesize the features of multiple data and solve the problem of data heterogeneity.Finally,a convolutional neural network(CNN),one of the deep learning frameworks,is used to determine the functioning conditions based on the 4S-TFSM.Experiments on field data verify that the proposed diagnostic method based on 4S-TFSM and CNN(4S-TFSM-CNN)can significantly improve the accuracy of working condition recognition with lower computational cost.To the best of our knowledge,this is the first work to discuss the effect of data heterogeneity on the working condition recognition performance of SRPS.

关键词： Sucker-rod pumping system Dynamometer card Working condition recognition Deep learning Time-frequency signature Time-frequency signature matrix

Isolation and culture of human primary osteoblasts:Comparing the effects of differences in method details on osteoblast characteristics

在线全文

学校读者我要写书评

暂无评论

Genes & Diseases 2024年第2期11卷 546-549页

作者： Fei Chen Yan Zhang Pai Peng xiao-Ting Huang Zi-Han Qiu Bao-cheng Liu Tie-Lin Yang bo Yang Yan Guo Key Laboratory of Biomedical Information Engineering of Ministry of Education Biomedical Informatics & Genomics CenterSchool of Life Science and TechnologyXi'an Jiaotong UniversityXi'anShaanxi 710049China Department of Orthopaedics Shannxi Provincial People's Hospital (The Third Affiliated Hospital of Xi'an Jiaotong University)Xi'anShaanxi 710068China

Osteoblasts are essential in the maintenance of human bone homeostasis.1 The abnormal formation and impaired differentiation ability of osteoblasts are pivotal factors leading to bone-related diseases,suggesting that an indepth study of osteoblasts can provide novel treatment strategies for these diseases.2 Human primary osteoblasts are precious experimental models in bone-related research.3 However,the isolation and culture of human primary osteoblasts still have some difficulties and limitations.Here,we refined a method to isolate and culture human primary osteoblasts by taking cancellous bone through a bone tissue sampler and pre-digesting it with pancreatin,which makes the process easier,cheaper,and more efficient.Furthermore,we compared the effects of the subtle changes in isolation and culture methods on the phenotype of human primary osteoblasts and examined the differences in morphology,proliferation,and differentiation between micro-explants cultured osteoblasts(MECOBs)and explants cultured osteoblasts(EC-OBs).

关键词： impaired culture details

Bed inventory balance and stability of dual circulating fluidized bed systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第1期84卷 98-106页

作者： Yangjun Wei Leming cheng David Pallares bo Leckner Institute for Thermal Power Engineering State Key Laboratory of Clean Energy UtilizationZhejiang UniversityHangzhou310027China Department of Space Earth and EnvironmentChalmers University of TechnologyS-41296GöteborgSweden

Experiments and modelling are conducted for general understanding on the imbalance phenomenon and for discussion on the strategies to improve the bed inventory balance and stability of a dual circulating fluidized bed(DCFB)system.The experiments are carried out in a 15.5 m high pilot-scale DCFB cold test system.A fluid-dynamic DCFB model is developed based on a 1.5-dimensional semi-empirical model of an industrial CFB boiler,validated by experimental data.The effects of control methods and operation conditions on the bed inventory balance and on the stability of the pilot-and large-scale DCFB systems are discussed.A"stable-unbalanced"state,where the system reaches a steady state,consisting of un-balanced bed inventories,is observed in both experiments and model simulation.To maintain a balanced state and similar bed inventory in the DCFB systems with similar cross-sectional areas,it is recom-mended to keep similar total pressure drops or gas velocities in both reactors.

关键词： Bed inventory balance Stability Dual circulating fluidized bed(DCFB) Experiment Modelling

Pressure-induced emission(PIE)in halide perovskites toward promising applications in scintillators and solid-state lighting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Aggregate

Aggregate 2024年第1期5卷 9-15页

作者： Wenya Zhao Guanjun xiao bo Zou State Key Laboratory of Superhard Materials College of PhysicsJilin UniversityChangchunChina

High-pressure chemistry has provided a huge boost to the development of scientific community.Pressure-induced emission(PIE)in halide perovskites is gradually showing its unique charm in both pressure sensing and optoelectronic device applications.Moreover,the PIE retention of halide perovskites under ambient conditions is of great commercial value.Herein,we mainly focus on the potential applications of PIE and PIE retention in metal halide perovskites for scintillators and solid-state lighting.Based on the performance requirements of scintillator and single-component white light-emitting diodes(WLEDs),the significance of PIE and PIE retention is critically clarified,aiming to design and synthesize materials used for high-performance optoelectronic devices.This perspective not only demonstrates promising applications of PIE in the fields of scintillators and WLEDs,but also provides potential applications in display imaging and anti-counterfeiting of PIE materials.Furthermore,solving the scientific disputes that exist under ambient conditions is also simply discussed as an outlook by introducing high-pressure dimension to produce PIE.

关键词： halide perovskites high pressure light-emitting diode pressure-induced emission scintillators solidstate lighting