检索结果-南通市图书馆

Complex microstructure fabrication by integrating silicon anisotropic etching and UV-LIGA technology

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High Technology Letters 2007年第4期13卷 369-372页

作者：靖向萌 chen Di Huang Chuang chen xiang liu Jingquan Zhu Jun National Key Laboratory of Micro/Nano Fabrication Technology. Key Laboratory for Thin Films and Microtechnology of Ministry of Education Research Institute of Micro/Nano Science and Technology Shanghai Jiaotong University Shanghai 200030 P.R. China

A fabrication method which integrates silicon anisotropic etching micromachining with UV-LIGA technology to make complex microstmetures is presented. This proposed combined process enables the fabrication of high-aspect-ratio and three-dimensional （3D） microstructures, which cannot be fabricated by silicon bulk mieromachining or UV-LIGA alone. To demonstrate this combined method, the 100μm thick SU-8 micro gears were fabricated on the silicon convex square structure, which is 100μm × 100μm× 80μm in dimension. In the subsequent micro hot embossing process, a novel type of plastics polyethylene terephtalate glycol （PETG） was tried for use. Through optimizing process parameters, PETG shows the potential of being used as plastic replica in micro-electro-mechanical system （MEMS）. This fabrication technology provides a new option for the increasing need of functionality, quality and economy of MEMS.

关键词： UV-LIGA bulk silicon micro machining 3D microfabrication polyethylene terephtalate glycol (PETG)

Thermal fatigue and wear of compacted graphite iron brake discs with various thermomechanical properties

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Foundry 2024年第3期21卷 248-256页

作者： Gui-quan Wang Zhuo Xu Zhong-li liu xiang chen Yan-xiang Li School of Nuclear Equipment and Nuclear Engineering Yantai UniversityYantai 264005ShandongChina School of Materials Science and Engineering Tsinghua UniversityBeijing 100084China Key Laboratory for Advanced Materials Processing Technology Ministry of EducationBeijing 100084China

The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake *** this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical *** graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of *** peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction *** morphology of thermal cracks and 3D profiles of the worn surfaces were also *** is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue *** of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal *** the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear.

关键词： compacted graphite iron brake disc thermomechanical properties thermal fatigue wear

Filtering and regret network for spacecraft component segmentation based on gray images and depth maps

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第7期37卷 439-449页

作者： xiang liu Hongyuan WANG Zijian WANG Xinlong chen Weichun chen Zhengyou XIE Institute of Aeronautics Harbin Institute of TechnologyHarbin 150001China Qian Xuesen Laboratory of Space Technology China Academy of Space TechnologyBeijing 100080China

Identifying and segmenting spacecraft components is vital in many on-orbit space missions,such as on-orbit maintenance and component *** depth maps with visual images has been proven effective in improving segmentation ***,existing methods ignore the noise and fallacy in collected depth maps,which interfere with the network to extract representative features,decreasing the final segmentation *** this end,this paper proposes a Filtering and Regret Network(FRNet)for spacecraft component *** FRNet incorporates filtering and regret mechanisms to suppress the abnormal depth response in shallow layers and selectively reuses the filtered cues in deep layers,avoiding the detrimental effects of low-quality depth information while preserving the semantic context inherent in depth ***,a two-stage feature fusion module is proposed,which involves information interaction and *** module effectively explores the feature correlation and unifies the multimodal features into a comprehensive ***,a large-scale spacecraft component recognition dataset is constructed for training and evaluating spacecraft component segmentation *** results demonstrate that the FRNet achieves a state-of-the-art performance with a mean Intersection Over Union(mIOU)of 84.13%and an average inference time of 133.2 ms when tested on an NVIDIA RTX 2080 SUPER GPU.

关键词： Spacecraft component recognition Multi-modal feature fusion Satellite dataset Intelligent systems Deep learning

Precipitating thermally reinforcement phase in aluminum alloys for enhanced strength at 400℃

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第5期172卷 71-82页

作者： xiang Su Yuan Lei Yang chen Hongjie Qu Zhixiang Qi Gong Zheng Xu liu Henggao xiang Guang chen National Key Laboratory of Advanced Casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China School of Aviation and Mechanical Engineering Changzhou Institute of TechnologyChangzhou 213032China

Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy ***,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening ***,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum *** enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one *** significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T *** thermostable T phase effectively strengthens the matrix by in-hibiting dislocation ***,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high *** finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.

关键词： Aluminum alloys Precipitation Thermally reinforcement phase Re-aging treatment High-temperature strength

Overshoot phenomena:Observation and simulation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第2期8卷 391-399页

作者： Ting Feng MoRan liu ShiMin He xiang Wang chen Zhou Department of Space Physics School of Electronic InformationWuhan UniversityWuhan 430072China

High-power O-mode radio waves can excite artificial instabilities in the F region,according to experiments conducted at the European Incoherent Scatter Science Association(EISCAT)heating *** main instabilities include the parametric decay instability(PDI),oscillating two-stream instability(OTSI),and thermal parametric instability(TPI).The PDI and OTSI not only compete with each other,but also compete with the TPI,leading to a two-stage overshoot phenomenon:a miniovershoot occurs on a millisecond time scale after pump-on,followed by the main *** gain insight into the miniovershoot via a generalized Zakharov model,whereas the main overshoot can be observed as an enhanced plasma line overshoot phenomenon in incoherent scatter radar *** can also observe that the zero-frequency ion line exists only in the initial heating period after a cold start and that the upshifted and downshifted ion lines behave irregularly in the *** simulation results show that competition between the PDI and OTSI leads to an initial peak,which we named the *** following processes,namely ion density caviton generation,and collapse and cascade in the development of the PDI,contribute to the miniovershoot phenomenon.

关键词： overshoot parametric decay instability oscillating two-stream instability competition

A Novel Design of a Pre-separation Panel Structure to Protect Against the Impact of an Explosion in an Aircraft Plenum Chamber

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第1期37卷 166-180页

作者： Zongxing liu xiang Yang Jun liu School of Aeronautics Northwestern Polytechnical UniversityXi'an 710072China COMAC Shanghai Aircraft Design and Research Institute Shanghai 201210China

To reduce the damage of the pressurizing panel structure of a fuselage caused by an explosion at the“least risk bomb location”in an aircraft structure,a new pre-separation panel structure was designed to resist blast ***,the dynamic strain response and morphology of impact damage of the new pre-separation panel were measured in an impact damage ***,the commercial software LS-DYNA was used to calculate the propagation of the blast shock wave,and the results were compared with empirical equations to verify the rationality of the numerical calculation ***,the fluid–structure coupling method was used to calculate the damage process of the pre-separation panel structure under the impact of an explosion wave and an impact *** calculated results were in good agreement with the test results,which showed the rationality of the calculation method and the *** residual strength of the damaged pre-separation panel was significantly higher than that of the original damaged *** results show that the new pre-separation panel structure is reasonable and has certain significance for guiding the design of plenum chambers with strong resistance to implosion for aircraft fuselages.

关键词： Pre-separation panel structure Explosive response Residual strength Aircraft plenum chamber Least risk bomb location

Consensus on glycemic management for patients with coronary heart disease and type 2 diabetes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Geriatric Cardiology 2024年第7期21卷 689-702页

作者： Li-Nong JI Yun-Dai chen Jing liu xiang-Hai ZHOU Cardiovascular Subcommittee of Chinese International Exchange and Promotion Association for Medical and Healthcare Peking University People's Hospital Chinese PLA General Hospital

The prevalence of patients with coronary heart disease(CHD)and diabetes mellitus is notably high,posing sig-nificant residual cardiovascular risks even after routine interventions such as antihypertensive,lipid-lowering,and antithrombot-ic *** studies have demonstrated that certain glucose-lowering medications confer cardiovascular benefits for pa-tients with type 2 ***,a survey indicates that cardiologists may not be fully acquainted with the optimal screen-ing timing,indicators,and diagnostic criteria for type 2 diabetes,and there is insufficient awareness and a low rate of prescrip-tion of novel glucose-lowering medications with proven cardiovascular efficacy,such as glucagon-like peptide-1 receptor agon-ists(GLP-1 RAs)and sodium-glucose co-transporter-2 inhibitors(SGLT-2i).In this context,based on domestic and international guidelines or consensus and the latest evidence-based evidence,this consensus aims to standardize the glycemic management for patients with acute coronary syndrome,chronic coronary syndrome,and perioperative management for percutaneous coronary *** highlights the key points of screening and diagnosis of type 2 diabetes,and the comprehensive management of cardiovascular risk in patients with *** consensus elaborates on the principles and algorithms of glycemic management for CHD patients,without involving acute complications of diabetes,clarifies the clinical practice of glucose-lowering medications with cardiovascular benefits,and promotes the standardized use of these medications in cardiovascular and other related spe-cialty ***,it addresses the glucose-lowering treatment to comprehensively reduce cardiovascular risks.

关键词： coronary patients routine

MOF-based materials facilitate efficient anaerobic digestion of organic wastes:integrating substrate bioavailability and microbial syntrophism

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第8期18卷 153-157页

作者： Haoyu liu Ying Xu xiang chen Xiankai Wang Hang Wang Xiaohu Dai State Key Laboratory of Pollution Control and Resource Reuse School of Environmental Science and EngineeringTongji UniversityShanghai 200092China Shanghai Institute of Pollution Control and Ecological Security Shanghai 200092China YANGTZE Eco-Environment Engineering Research Center China Three Gorges CorporationWuhan 430010China National Engineering Research Center of Eco-Environment Protection for Yangtze River Economic Belt Wuhan 430010China

Anaerobic digestion(AD)of organic waste(OW)for methane production is generally *** of AD systems with traditional materials(e.g.,electroconductive materials)is a current focus of research and has been reported to assist methanogenesis by enhancing the productivity of microbial metabolism among syntrophic *** in the AD of organic wastewater,in which microbial cells come into direct contact with the dissolved substrate,in the complex multiphase AD system of OW,low substrate bioavailability is an inevitable obstacle to microbial syntrophism for ***,we propose that improving substrate bioavailability and microbial syntrophism is a powerful strategy for ensuring material-assisted efficient AD of *** on the above considerations,metal-organic frameworks(MOFs),with their exceptionally high porosity,outstanding multi-functionality,and tuneable structures,have excellent potential for application in multiphase anaerobic systems of OW to integrate substrate bioavailability and microbial syntrophism and drive efficient *** addition,MOFs with designable and tuneable natures have great potential for use in identifying suitable materials for anaerobic systems for different types of OW via machine-learning technologies,thereby effectively enhancing methanogenesis from ***,the sustainable application of MOFs in AD and the corresponding environmental risks warrant further investigation.

关键词： Anaerobic digestion Methane production Biodegradability Functional materials Metal-organic frameworks

Response characteristics of PWR primary circuit under SBLOCAs considering steam bypass discharging

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第6期35卷 189-201页

作者： Shuai Yang xiang-Bin Li Yu-Sheng liu Jia-Ning Xu De-chen Zhang School of Nuclear Science and Engineering North China Electric Power UniversityBeijing 102206China Beijing Key Laboratory of Passive Safety Technology for Nuclear Energy Beijing 102206China Nuclear and Radiation Safety Center MEPBeijing 100084China

Small-break superposed station blackout(SBO)accidents are the basic design accidents of nuclear power *** the condition of a small break in the cold leg,SBO further increases the severity of the accident,and the steam bypass discharg-ing system(GCT)in the second circuit can play an important role in guaranteeing core *** explore the influence of the GCT on the thermal-hydraulic characteristics of the primary circuit,RELAP5 software was used to establish a numerical model based on a typical pressurized water reactor nuclear power *** different small breaks in the cold-leg super-posed SBO were selected,and the impact of the GCT operation on the transient response characteristics of the primary and secondary circuit systems was *** results show that the GCT plays an indispensable role in core heat removal during an accident;otherwise,core safety cannot be *** GCT was used in conjunction with the primary safety injection system during the placement *** the break diameter was greater than a certain critical value,the core cooling rate could not be guaranteed to be less than 100 K/h;however,the core remained in a safe state.

关键词： Steam bypass discharging Pressurized water reactor SBLOCA Numerical simulation