检索结果-南通市图书馆

Journal of Environmental Sciences 2006年第1期18卷 193-200页

作者： jae-wook lee Tae-Ouk Kwon Ramesh Thiruvenkatachari Il-Shik Moon Department of Chemistry Engineer Seonam University Namwon 590-711 Korea Department of Chemistry Engineer Sunchon National University Suncheon 540-742 Korea

This study evaluates the adsorption ability ofbisphenol A（BPA） on titanium dioxide（TiO2） and its effect on the photocatalysis by advanced oxidation process using UV radiation and TiO2 photocatalyst. Degradation of BPA was also evaluated for the system without adsorption prior to photocatalytic reaction. The separation of TiO2 from BPA solution treated by pilot-scale photocatalytic reactor （capacity 0.16 m^3） was studied using submerged ultrafiltration （UF） membrane. It was found that although adsorption capacity of BPA was not high, adsorption played an important role in improving the efficiency ofphotocatalysis. On the other hand, during the separation of TiO2 particles from aqueous suspension, the permeate flux of the membrane was strongly affected by transmembrane pressure and TiO2 dose. The permeate turbidity was decreased below 1 NTU.

关键词： bisphenol A TiO2 adsorption membrane photocatalysis

Numerical simulation for dendrite growth in directional solidification using LBM-CA(cellular automata)coupled method

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2020年第14期47卷 15-24页

作者： Wonjoo lee Yuhyeong Jeong jae-wook lee Howon lee Seong-hoon Kang Young-Min Kim Jonghun Yoon Department of Mechanical Design Engineering Hanyang University222Wangsimni-roSeongdong-guSeoul 04763Republic of Korea Materials Deformation Department Korea Institute of Materials Science797 ChangwondaeroSeongsan-guChangwon-siGyeongnam-do 51508Republic of Korea Department of Mechanical Engineering Hanyang University55 Hanyangdaehak-roSangnok-guAnsan-siGyeonggi-do 15588Republic of Korea

To predict the dendrite morphology and microstructure evolution in the solidification of molten metal,numerically,lattice Boltzmann method(LBM)-cellular automata(CA)model has been developed by integrating the LBM to solve the mass transport by diffusion and convection during solidification and the CA to determine the phase transformation with respect to the solid fraction based on the local equilibrium *** is successfully validated with analytic solutions such as Lipton-Glicksman-Kurz(LGK)model in static melt,and Oseen-Ivantsov solution under the fluid flow conditions in terms of tip radius and velocity of the dendrite *** proposed LBM-CA model does not only describe different types of dendrite formations with respect to various solidification conditions such as temperature gradient and growth rate,but also predict the primary dendrite arm spacing(PDAS)and the secondary dendrite arm spacing(SDAS),quantitatively,in directional solidification(DS)experiment with Ni-based superalloy.

关键词： Cellular automata(CA) Lattice Boltzmann method(LBM) Dendritic growth Directional solidification

Bioinspired Multi-material Polyjet-printed Frog Robot for Synchronous and Asynchronous Swimming

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2023年第3期20卷 923-933页

作者： Afaque Manzoor Soomro jae-wook lee Fida Hussain Memon Faheem Ahmed Kashif Hussain Kyung Hyun Choi Department of Mechatronics Engineering Jeju National UniversityJeju63243South Korea Department of Electrical Engineering Sukkur IBA UniversitySukkur65200Pakistan

This paper proposes the bioinspired soft frog robot. All printing technology was used for the fabrication of the robot. Polyjet printing was used to print the front and back limbs, while ultrathin filament was used to print the body of the robot, which makes it a complete soft swimming robot. Dual thrust generation approach has been proposed by embedding the main muscle and antagonistic muscle in all the limbs, which enables it to attain high speed (18 mm/s), significant control to swim in dual mode (synchronous and asynchronous modes). To achieve the swimming motion of frog, four SMA (BMF 300) muscle wires were used. The frog robot is named as (FROBOT). The hind limbs are 60 mm long and 10 mm thick on average, while the front limbs are 35 mm long and 7 mm thick. Model-based design and rigorous analysis of the dynamics of real frogs have allowed FROBOT to be developed to swim at a level that is remarkably consistent with real frogs. Electrical and mechanical characteristics have been performed. In addition, the test data were further processed using TRACKER to analyze angle, displacement and velocity. FROBOT (weighs 65 g) can swim at different controllable frequencies (0.5–2 Hz), can rotate in any direction on command from custom built LabVIEW software allowing it to swim with speed up to 18 mm/s on deep water surface (100 cm) with excellent weight balance.

关键词： Bioinspired Soft robotics Frog FROBOT Asynchronous swimming

Inhibitory effect of Jeju endemic seaweeds on the production of pro-inflammatory mediators in mouse macrophage cell line RAW 264.7

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science B(Biomedicine & Biotechnology) 2010年第5期11卷 315-322页

作者： Eun-Jin YANG Ji-Young MOON Min-Jin KIM Dong Sam KIM Chan-Shick KIM wook jae lee Nam Ho lee Chang-Gu HYUN Jeju Biodiversity Research Institute(JBRI) Jeju High-Tech Development Institute(HiDI) Jeju 699-943Korea Jeju Seaweed Industry Development Agency Cheju National UniversityJeju 690-756Korea Faculty of Biotechnology Cheju National UniversityJeju 690-756Korea Department of Chemistry Cheju National UniversityJeju 690-756Korea

Seaweed has been used in traditional cosmetics and as a herbal medicine in treatments for cough,boils,goiters,stomach ailments,and urinary diseases,and for reducing the incidence of tumors,ulcers,and *** the fact that seaweeds are frequently used in the practice of human health,little is known about the role of seaweed in the context of *** study aimed to investigate the influence of Jeju endemic seaweed on a mouse macrophage cell line(RAW 264.7) under the stimulation of lipopolysaccharide(LPS).Ethyl acetate extracts obtained from 14 different kinds of Jeju seaweeds were screened for inhibitory effects on pro-inflammatory *** results revealed that extracts from five seaweeds,Laurencia okamurae,Grateloupia elliptica,Sargassum thun-bergii,Gloiopeltis furcata,and Hizikia fusiformis,were potent inhibitors of the production of pro-inflammatory mediators such as nitric oxide(NO),prostaglandin E2(PGE2),interleukin-6(IL-6),and tumor necrosis factor-α(TNF-α).Based on these results,the anti-inflammatory effects and low cell toxicity of these seaweed extracts suggest potential thera-peutic applications in the regulation of the inflammatory response.

关键词： Nitric oxide Interleukin-(IL-) Prostaglandin E(PGE) Tumor necrosis factor-α(TNF-α) Seaweeds Pro-inflammatory mediators

Jeju seaweeds suppress lipopolysaccharide-stimulated proinflammatory response in RAW 264.7 murine macrophages

在线全文

学校读者我要写书评

暂无评论

Asian Pacific Journal of Tropical Biomedicine 2014年第7期4卷 529-537页

作者： Eun-Jin Yang Ji-Young Moon Sang Suk Kim Kyong-Wol Yang wook jae lee Nam Ho lee Chang-Gu Hyun Cosmetic Science Center Department of ChemistryJeju National University Jeju Technopark Ara-1-dongJeju-siJeju 690-121.Korea Citrus Research Station National Institute of Horticultural & Herbal ScienceRDAJeju 699-946.Korea Jeju Love Co. Ltd.542-5 Haengwon-ri.Gujwa-eupJeju 695-975.Korea LINC Agency Jeju National University

Objective:To investigate the anti-inflammatory effects of Jeju seaweeds on macrophage RAW264.7 cells under lipopolysaccharide(LPS)***:Ethyl acetate fractions were prepared from five different types of Jeju seaweeds,Dictyopteris divaricata(***),Dictyopteris prolifera(***),Prioutis cornea(***,Grateloupia laceolata(G,lanceolate,and Cralcloupia filicina(***)They were screened for inhibitory effects on proinflammatory mediators and cytokines such as nitric oxide(NO),prostaglandin E,,tumor necrosis factor-a(TNF-a),and interleukin-6(11.-6).Results:Our results revealed that ***,***,***,***,and *** potently inhibited ***-stimulaled NO production(IC_(50),values were 18.0,38.36,38.43,32.81 and 37.14μg/mL,respectively).Consistent with these findings,***,***,***,and *** also reduced the IPS-induced and prostaglandin E,production in a concentration-dependent ***,they suppressed the expression of inducible NO synthase and cyclooxygenase-2 at the protein level in a dose-dependent manner in the RAW264.7 cells,as detennined by western *** addition,the levels of TNF-a and IL-6,released into the medium,were also reduced by ***,***,***,G,lanceolata,and *** in a dose-dependent manner(IC_(50)values for TNF-a were 16.11,28.21,84.27,45.52 and74.75μg/mL,respectively;IC_(50),values for IL-6 were 37.35,80.08,103.28,62.53 and 84.28μg/mL,respectively).The total phlorotannin content was measured by the Folin-Ciocalteu method and expressed as phloroglucinol *** content was 92.0μg/mg for ***,151.8μg/mg for ***,57.2μg/mg for ***,53.0 pg/mg for ***,and 40.2μg/mg for ***:Thus,these findings suggest that Jeju seaweed extracts have potential therapeutic applications for inflammatory responses.

关键词： Nitrie oxide Inlerleukin-6 Prostaglandin E_2 Tumor necrosis factor-α Seaweeds Proinflammatory mediators

Decomposition of CCl_4 and CHCl_3 on gliding arc plasma

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2006年第1期18卷 83-89页

作者： Antonius Indarto CHOI jae-wook lee Hwaung SONG Hyung-keun Korea Institute of Science and Technology Clean Technology Research Center P.O. Box 131 Cheongryang Seoul 130-650 Korea Korea Institute of Science and Technology Clean Technology Research Center P.O. Box 131 Cheongryang Seoul 130-650 Korea.

Decomposition of chlorinated hydrocarbons, CCl4 and CHCl3, in gliding plasma was examined. The effects of initial concentrations, total gas flow rates, and power consumption have been investigated. The conversion result was relatively high. It reached 80% for CCl4 and 97% for CHCl3. Using atmospheric air as the carrier gas, the plasma reaction occurred at exothermic reaction and the main products were CO2, CO, and Cl2. Transformation into CCl4 was also detected for CHCl3 decomposition reaction. The conversion of CCh and CHCl3 were increased with the increasing applied frequency and decreasing total gas flow rate.

关键词： plasma gliding arc CCl4 CHCl3 decomposition reaction

A review of C_1 chemistry synthesis using yttrium-stabilized zirconia catalyst

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2008年第1期26卷 1-6页

作者： Antonius Indarto jae-wook Choi Hwaung lee Hyung Keun Song Plasma-Catalyst Chemical Process

C1 chemistry based on synthesis gas, methane, and carbon dioxide offers many routes to industrial chemicals. The reactions related to the synthesis of gas can be classified into direct and indirect approach for making such products, such as acetic acid, dimethyl ether, and alcohol. Catalytic syngas processing is currently done at high temperatures and pressures, conditions that could be unfavorable for the life of the catalyst. Another issue of C1 chemistry is related to the methane-initiated process. It has been known that direct methane conversions are still suffering from low yields and selectivity of products resulting in unprofitable ways to produce products, such as higher hydrocarbons, methanol, and so on. However, many experts and researchers are still trying to find the best method to overcome these barriers, for example, by finding the best catalyst to reduce the high-energy barrier of the reactions and conduct only selective catalyst-surface reactions. The appli- cation of Yttria-Stabilized Zirconia （YSZ） and its combination with other metals for catalyzing purposes are increasing. The existence of an interesting site that acts as oxygen store could be the main reason for it. Moreover, formation of intermediate species on the surface of YSZ also contributes significantly in increasing the production of some specific products. Understanding the phenomena happening inside could be necessary. In this article, the use of YSZ for some C1 chemistry reactions was discussed and reviewed.

关键词： C1 chemistry methane synthesis gas methanol yttria-stabilized zirconia catalyst oxygen storage rare earths

Curcumin-induced cell death depends on the level of autophagic flux in A172 and U87MG human glioblastoma cells

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Natural Medicines 2020年第2期18卷 114-122页

作者： lee Jong-Eun Yoon Sung Sik lee jae-wook Moon Eun-Yi Department of Bioscience and Biotechnology Sejong UniversitySeoul 05006Republic of Korea

Glioblastoma is the deadliest neoplasm with the worst 5-year survival rate among all human *** promotes autophagic cell death or blocks the induction of apoptosis in eukaryotic ***,we investigated whether varying levels of autophagic flux in glioblastoma lead to different efficacies of curcumin treatment using U87 MG and A172 human glioblastoma *** number of LC3 puncta,the number of cells with LC3 puncta and the level of LC3 Ⅱ,Atg5 and Atg7 protein were higher in U87 MG cells compared with A172 *** the cells were incubated with curcumin for 24 or 48 h,the percentage of cell death was higher in A172 cells compared with U87 MG *** the level of LC3 was lower,that of curcumin-induced LC3 was higher,in A172 cells than in U87 MG *** relative increases in cell death and LC3-mediated autophagy were greater under serum starvation in A172 cells compared with U87 MG ***-induced A172 cell death was reduced by serum *** both types of cells were transfected with LC3-GFP,the percentage of cell death was higher in A172 cells than that in U87 MG *** together,the data demonstrate that curcumin-mediated tumor cell death is regulated by the basal level of autophagic flux in different glioblastoma *** suggests that prior to the use of various curcumin therapeutics,the level of basal or induced autophagic flux should be carefully examined in tumor cells for the best efficacy.

关键词： Glioblastoma A172 U87MG Autophagic flux Curcumin

Methane Conversion Using Dielectric Barrier Discharge: Comparison with Thermal Process and Catalyst Effects

在线全文

学校读者我要写书评

暂无评论

Journal of Natural Gas Chemistry 2006年第2期15卷 87-92页

作者： Antonius Indarto jae-wook Choi Hwaung lee Hyung Keun Song Korea Institute of Science and Technology Clean Technology Research CenterP.O. Box 131CheongryangSeoul 130-650Korea

The direct conversion of methane using a dielectric barrier discharge has been experimentally studied. Experiments with different values of flow rates and discharge voltages have been performed to investigate the effects on the conversion and reaction products both qualitatively and quantitatively. Experimental results indicate that the maximum conversion of methane has been 80% at an input flow rate of 5 ml/min and a discharge voltage of 4 kV. Experimental results also show that the optimum condition has occurred at a high discharge voltage and higher input flow rate. In terms of product distribution, a higher flow rate or shorter residence time can increase the selectivity for higher hydrocarbons. No hydrocarbon product was detected using the thermal method, except hydrogen and carbon. Increasing selectivity for ethane was found when Pt and Ru catalysts presented in the plasma reaction. Hydrogenation of acetylene in the catalyst surface could have been the reason for this phenomenon as the selectivity for acetylene in the products was decreasing.

关键词： plasma dielectric barrier discharge thermal process methane conversion catalyst

Partial Oxidation of Methane with Sol-Gel Fe/Hf/YSZ Catalyst in Dielectric Barrier Discharge: Catalyst Activation by Plasma

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2006年第5期24卷 513-518页

作者： Antonius Indarto jae-wook Choi Hwaung lee Hyung Keun Song Jelliarko Palgunadi Clean Technology Research Center Korea Institute of Science and Technology KoreaDepartment of Chemical and Biological Engineering Korea University Korea Clean Technology Research Center Korea Institute of Science and Technology Korea Hydrogen Energy Research Center Korea Institute of Science and Technology Korea

A 1% Fe-30% Hf over yttria-stabilized zirconia catalyst in combination with novel plasma-assisted activation techniques for a direct partial oxidation of methane to methanol was tested using dielectric barrier discharge plasma at ambient temperature and atmospheric pressure. However, instead of methanol, the reaction products were dominated by HE, CO, CO2, C2, and H2O. A catalytically activated plasma process increased the production of methanol compared with a noncatalytic plasma process. The maximum selectivity of methanol production was achieved using a catalyst that was treated at higher applied power.

关键词： methane oxidation dielectric barrier discharge catalyst plasma activation rare earths