检索结果-南通市图书馆

Heat Recuperation for the Self-Condensing CO_(2)Transcritical Power Cycle

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第5期33卷 1630-1641页

作者： PAN Lisheng SHI weixiu sun Yin sun Yiwei wei Xiaolin State Key Laboratory of High-temperature Gas Dynamics Institute of MechanicsChinese Academy of SciencesBeijing 100190China School of Environment and Energy Engineering Beijing University of Civil Engineering and ArchitectureBeijing 100044China

The supercritical CO_(2)Brayton cycle has potential to be used in electricity generation occasions with its advantages of high efficiency and compact *** on a so-called self-condensing CO_(2)transcritical power cycle,a model was established and four different layouts of heat recuperation process were analyzed,a without-recuperation cycle,a post-recuperation cycle,a pre-recuperation cycle and a re-recuperation *** results showed that the internal normal cycle's share of the whole cycle increases with increasing the cooling pressure and decreasing the final cooled *** load in the supercritical heater decreases with increasing the cooling *** perspective of performance,the re-recuperation cycle and the pre-recuperation cycle have similar thermal efficiency which is much higher than other two *** thermal efficiency and net power output have a maximum value with the cooling pressure,except in the condition with the final cooled temperature of 31℃.Considering both the complexity and the economy,the pre-recuperation cycle is more applicable than the other *** 35℃of the final cooled temperature,the thermal efficiency of the pre-recuperation cycle reaches the peak 0.34 with the cooling pressure of 8.4 MPa and the maximum net power output is 2355.24 kW at 8.2 MPa of the cooling pressure.

关键词： CO_(2)transcritical power cycle heat recuperation process self-condensing

Local Hybrid Linear State Estimation for Electric Power Systems Using Stream Processing

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 1259-1268页

作者： Kang sun Manyun Huang Zhinong wei Yuzhang Lin Guoqiang sun College of Energy and Electrical Engineering Hohai UniversityNanjing 210098China Department of Department of Electrical and Computer Engineering University of Massachusetts LowellLowell MA 01854USA IEEE

The increasing penetration of renewable energy resources with highly fluctuating outputs has placed increasing concern on the accuracy and timeliness of electric power system state estimation(SE).Meanwhile,we note that only a fraction of system states fluctuate at the millisecond level and require to be *** such,refreshing only those states with significant variation would enhance the computational efficiency of SE and make fast-continuous update of states ***,this is difficult to achieve with conventional SE methods,which generally refresh states of the entire system every 4–5 *** this context,we propose a local hybrid linear SE framework using stream processing,in which synchronized measurements received from phasor measurement units(PMUs),and trigger/timingmode measurements received from remote terminal units(RTUs)are used to update the associated local ***,the measurement update process efficiency and timeliness are enhanced by proposing a trigger measurement-based fast dynamic partitioning algorithm for determining the areas of the system with states requiring *** particular,non-iterative hybrid linear formulations with both RTUs and PMUs are employed to solve the local SE *** timeliness,accuracy,and computational efficiency of the proposed method are demonstrated by extensive simulations based on IEEE 118-,300-,and 2383-bus systems.

关键词： Fast dynamic partitioning local hybrid linear state estimation phasor measurement units stream processing timeliness trigger/timing-mode measurements

Customer Joining Behavior and Regulation Strategy in Visible Multi-Server Queues with Synchronous Vacations of Partial Servers

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第3期37卷 1209-1232页

作者： sun wei WANG Hao XIE Xumeng LI Shiyong School of Economics and Management Yanshan UniversityQinhuangdao 066004China

This paper studies customer joining behavior and system regulation strategy in nonexhaustive visible M/M/m queues with synchronous vacations of a part of the *** this part of the servers are idle,they take multiple vacations simultaneously(vacation period).Until there are customers waiting in the queue,they are reactivated and all servers are busy or idle(busy period).The authors call this part of the servers as“partial servers”.In view of the fully visible queue and the almost visible queue,the authors obtain customers’equilibrium joining threshold strategies and their socially optimal joining threshold strategies,respectively,and observe that customer joining behavior in equilibrium generally makes the system overcrowded,which makes the equilibrium social welfare lower than the optimal social *** regulation,interestingly,for optimizing social welfare,the system manager hopes not only customers arriving in vacation period pay attention to the number of partial servers,but also customers arriving in busy period should care about it rather than ***,arranging more servers for vacation does not necessarily lead to the decrease of social welfare on condition that the number of partial servers is close to *** for the information advantage of the fully visible case,it is not obvious for increasing social welfare and even unfavorable to servers’profit unless the number of partial servers is big ***,given the different composition of social welfare,there exists the optimal number of partial servers and the optimal arrival rate of customers for maximizing social welfare.

关键词： Customer behavior non-exhaustive service partial servers regulation strategy synchronous vacations visible queue

Optimizing circumferential assembly angle of rotor parts connected by curvic couplings based on acquired tooth surface error data

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第3期37卷 404-416页

作者： Huibin sun Meng LIU Yingzhi ZHANG Chenle wei Key Laboratory of High Performance Manufacturing for Aero Engine Ministry of Industry and Information TechnologyNorthwestern Polytechnical UniversityXi’an 710072China AECC South Industry Company Limited Zhuzhou 412002China

Due to the excellent self-centering and load-carrying capability,curvic couplings have been widely used in advanced aero-engine ***,curvic tooth surface errors lead to poor assembly *** physical-master-gauge-based indirect tooth surface error measurement and circumferential assembly angle optimization methods have the disadvantages of high cost and weak *** unknown tooth surface fitting mechanism is a big barrier to assembly precision prediction and ***,this work puts forward a data-driven assembly simulation and optimization approach for aero-engine rotors connected by curvic *** origin of curvic tooth surface error is deeply *** 5-axis sweep scan method,a large amount of high-precision curvic tooth surface data are acquired *** on geometric models of parts,the fitting mechanism of curvic couplings is uncovered for assembly precision simulation and prediction.A circumferential assembly angle optimization model is developed to decrease axial and radial assembly *** results show that the assembly precision can be predicted accurately and improved *** uncovering the essential principle of the assembly precision formation and proposing circumferential assembly angle optimization model,this work is meaningful for assembly quality,efficiency and economy improvement of multistage aero-engine rotors connected by curvic couplings.

关键词： Curvic couplings Tooth surface error Assembly precision Axial and radial runouts Circumferential assembly angle

Analysis and Modeling of Calendar Aging and Cycle Aging of LiCoO_(2)/Graphite Cells

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1109-1118页

作者： WANG wei YUAN Baoqiang sun Qie WENNERSTEN Ronald Institute of Thermal Science and Technology Shandong UniversityJi’nan250061China School of Energy and Power Engineering Shandong UniversityJi’nan250061China Institute for Advanced Science and Technology Shandong UniversityJi’nan250061China

Lithium-ion batteries are used in a wide range of ***,their cycle life suffers from the problem of capacity fade,which includes calendar and cycle *** effects of storage time,temperature and partial charge-discharge cycling on the capacity fade of Li-ion batteries are investigated in this *** calendar aging and cycle aging are presented based on the storage and cycling experiment on LiCoO_(2)/graphite cells under different storage temperature and different ranges of state of charge(SOC).Based on the measurement data,a one-component and a double-component aging model are presented to respectively describe the capacity fade caused by calendar and cycle *** calendar aging of LiCoO_(2)/graphite batteries is mainly affected by temperature and SOC during the *** SOC and change in SOC(ΔSOC)are the main factors affecting battery degradation during cycling operation.

关键词： Lithium-ion battery LiCoO_(2)(LCO)/graphite calendar aging cycle aging lifetime model

Synthesis of core-shell nanostructured SiO_(2)/TiO_(2)photocatalysts via atomic layer deposition in a fluidized bed with central tube

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 19-28页

作者： wei Liu Daoyin Liu Zuyang Zhang Zhenkun sun Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education School of Energy&EnvironmentSoutheast UniversityNanjing 210096China

Fluidized bed atomic layer deposition is an efficient technique for particle coating with precise control over the film thickness and uniformity at the *** this study,a fluidized bed with a central tube is designed,where the central tube has two roles:improve fluidization and deliver precursors *** synthesis of core-shell structured SiO_(2)/TiO_(2)nanoparticle catalysts for photodegradation of tetracycline hydrochloride(TC)is carried out using TiCl_(4)and H_(2)O as precursors at 180℃under atmospheric *** the combination of vibration and central tube,the segregation of agglomerate size along the bed height is weakened,and the prepared SiO_(2)/TiO_(2)nanoparticles show excellent photocatalytic degradation performance:the degradation efficiency on TC is 96%under 300 W xenon lamp irradiation for 60 *** mechanism of enhanced photocatalytic activity is due to the Ti-O-Si bonds generated at the interface,which increase the ability to absorb sunlight and accelerate the separation of holes and electrons.

关键词： SiO_(2)/TiO_(2)nanoparticles Fluidization Atomic layer deposition Photocatalysts Photocatalytic mechanism

Design and Control of an Autonomous Bat-like Perching UAV

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第3期21卷 1253-1264页

作者： Long Bai wei Wang Xiaohong Chen Yuanxi sun State Key Laboratory of Mechanical Transmission Chongqing UniversityChongqing400044China

Perching allows small Unmanned Aerial Vehicles(UAVs)to maintain their altitude while significantly extending their flight duration and reducing ***,current research on flying habitats is poorly adapted to unstructured environments,and lacks autonomous capabilities,requiring ideal experimental environments and remote control by *** solve these problems,in this paper,we propose a bat-like UAV perching mechanism by investigating the bat upside-down perching method,which realizes double self-locking in the perching state using the ratchet and four-link dead point *** on this perching mechanism,this study proposes a control strategy for UAVs to track targets and accomplish flight perching autonomously by combining a binocular camera,single-point LiDAR,and pressure *** perching experiments were conducted for crossbar-type objects *** experimental results show that a multirotor UAV equipped with the perching mechanism and sensors can reliably achieve autonomous flight perching and re-flying off the target *** power consumption is reduced to 2.9%of the hovering state when perched on the target object.

关键词： Bio-inspired design Perching mechanism UAV Autonomous flight

Non-Convex Optimization of Resource Allocation in Fog Computing Using Successive Approximation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第2期37卷 805-840页

作者： LI Shiyong LIU Huan LI Wenzhe sun wei School of Economics and Management Yanshan UniversityQinhuangdao 066000China

Fog computing can deliver low delay and advanced IT services to end users with substantially reduced energy ***,with soaring demands for resource service and the limited capability of fog nodes,how to allocate and manage fog computing resources properly and stably has become the ***,the paper investigates the utility optimization-based resource allocation problem between fog nodes and end users in fog *** authors first introduce four types of utility functions due to the diverse tasks executed by end users and build the resource allocation model aiming at utility ***,for only the elastic tasks,the convex optimization method is applied to obtain the optimal results;for the elastic and inelastic tasks,with the assistance of Jensen’s inequality,the primal non-convex model is approximated to a sequence of equivalent convex optimization problems using successive approximation ***,a two-layer algorithm is proposed that globally converges to an optimal solution of the original ***,numerical simulation results demonstrate its superior performance and *** with other works,the authors emphasize the analysis for non-convex optimization problems and the diversity of tasks in fog computing resource allocation.

关键词： Fog computing non-convex optimization optimal resource allocation successive approximation method utility function

On-surface synthesis and characterization of polyynic carbon chains

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第3期11卷 192-199页

作者： Wenze Gao wei Zheng Luye sun Faming Kang Zheng Zhou wei Xu Interdisciplinary Materials Research Center School of Materials Science and Engineering Tongji University

Carbyne, an elusive sp-hybridized linear carbon allotrope, has fascinated chemists and physicists for decades. Due to its high chemical reactivity and extreme instability, carbyne was much less explored in contrast to the sp2-hybridized carbon allotropes such as graphene. Herein, we report the on-surface synthesis of polyynic carbon chains by demetallization of organometallic polyynes on the Au（111） surface;the longest one observed consists of ～60 alkyne units（120 carbon atoms）. The polyynic structure of carbon chains with alternating triple and single bonds was unambiguously revealed by bond-resolved atomic force microscopy. Moreover, an atomically precise polyyne, C14, was successfully produced via tip-induced dehalogenation and ring-opening of the decachloroanthracene molecule(C14Cl10) on a bilayer NaCl/Au（111） surface at 4.7 K, and a band gap of 5.8 eV was measured by scanning tunnelling spectroscopy,in a good agreement with the theoretical HOMO–LUMO gap（5.48 eV）.

关键词： polyyne scanning probe microscopy carbon allotrope on-surface synthesis organometallic polyyne