检索结果-南通市图书馆

Optimizing calcination of coal by-products for maximizing REE leaching recovery and minimizing Al,Ca,and Fe contamination

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1354-1365,I0006页

作者： tushar Gupta Ahmad Nawab Rick Honaker MP Materials Mountain Pass Mine 67750 Bailey RoadMountain PassCA92366USA Department of Mining Engineering University of KentuckyLexingtonKY40506USA

High-temperature calcination is effective in improving the leaching characteristics of rare earth elements(REEs)from conventional REE-bearing minerals by transforming them into more leachable ***,the recovery of contaminants such as Al,Fe,and Ca also increases *** objective of the study was to maximize the REE extraction while minimizing the concentration of contaminant ions(Al,Ca,and Fe)in the leach *** density fractions of the coarse refuse from the Baker and Fire Clay seam coal refuse were pulverized to a top size of 180μm and used as a feedstock for the *** the samples generated from thermal treatment were leached at 1%(w/v)using 1.2 mol/L sulfuric acid at 75℃ for 2 *** results from a parametric program based on a Box-Behnken design were used for modeling and optimization of three operating parameters associated with the lab-scale calcination *** parameters included temperature(400-800℃),ramp rate(2-10℃/min)and holding time(0-120 min).It was determined that the calcination temperature was the most significant parameter influencing REE *** majority of the heavy rare earth elements(HREEs)were found to be present in an insoluble form in the calcination products and were marginally affected by thermal treatment.A strong correlation between light rare earth elements recovery(LREEs)and Al suggested a possible association with *** optimum operating conditions for high REE recovery with comparatively lower contaminant concentration for 1.6 specific gravity float and 2.2 sink fractions of Baker and Fire Clay seam material were determined to be at 776,800℃ and 407,800℃,calcining temperatures,respectively.A higher optimum temperature of 1.6 float fraction of Baker seam relative to Fire Clay seam material was due to elevated pyrite concentration in Baker seam *** treatment at 400℃ converted pyrite into a soluble intermedium iron oxide,resulting in a high Fe content in the ***

关键词： Calcination Optimization Rare earth elements Coal refuse

维普期刊数据库

A critical review on solid-state welding of high entropy alloys-processing,microstructural characteristics and mechanical properties of joints

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第4期34卷 78-133页

作者： tushar Sonar Mikhail Ivanov Evgeny Trofimov Aleksandr Tingaev Ilsiya Suleymanova Department of Welding Engineering Institution of Engineering and TechnologySouth Ural State University(National Research University)Chelyabinsk454080Russia Department of Materials Science Physical and Chemical Properties of MaterialsInstitution of Engineering and TechnologySouth Ural State University(National Research University)Chelyabinsk454080Russia

The high entropy alloys(HEAs)are the newly developed high-performance materials that have gained significant importance in defence,nuclear and aerospace sector due to their superior mechanical properties,heat resistance,high temperature strength and corrosion *** alloys are manufactured by the equal mixing or larger proportions of five or more alloying *** exhibit superior mechanical performance compared to traditional engineering alloys because of the extensive alloying composition and higher entropy of *** state welding(SSW)techniques such as friction stir welding(FSW),rotary friction welding(RFW),diffusion bonding(DB)and explosive welding(EW)have been efficiently deployed for improving the microstructural integrity and mechanical properties of welded HEA *** HEA interlayers revealed greater potential in supressing the formation of deleterious intermetallic phases and maximizing the mechanical properties of HEAs *** similar and dissimilar joining of HEAs has been manifested to be viable for HEA systems which further expands their industrial ***,the main objective of this review paper is to present a critical review of current state of research,challenges and opportunities and main directions in SSW of HEAs mainly CoCrFeNiMn and Al_xCoCrFeNi *** state of the art of problems,progress and future outlook in SSW of HEAs are critically reviewed by considering the formation of phases,microstructural evolution and mechanical properties of HEAs joints.

关键词： High entropy alloys Solid state welding Microstructure Mechanical properties

维普期刊数据库

LiDAR-based estimation of bounding box coordinates using Gaussian process regression and particle swarm optimization

在线全文

学校读者我要写书评

暂无评论

Biomimetic Intelligence & Robotics 2024年第1期4卷 24-35页

作者： Vinodha K. E.S.Gopi tushar Agnibhoj Department of Electronics and Communication Engineering National Institute of Technology TiruchirappalliTamil Nadu620015India

Camera-based object tracking systems in a given closed environment lack privacy and *** this study,light detection and ranging(LiDAR)was applied to track objects similar to the camera tracking in a closed environment,guaranteeing privacy and *** primary objective was to demonstrate the efficacy of the proposed technique through carefully designed experiments conducted using two *** Scenario I,the study illustrates the capability of the proposed technique to detect the locations of multiple objects positioned on a flat surface,achieved by analyzing LiDAR data collected from several locations within the closed *** II demonstrates the effectiveness of the proposed technique in detecting multiple objects using LiDAR data obtained from a single,fixed ***-time experiments are conducted with human subjects navigating predefined *** individuals move within an environment,while LiDAR,fixed at the center,dynamically tracks and identifies their locations at multiple *** demonstrate that a single,strategically positioned LiDAR can adeptly detect objects in motion around ***,this study provides a comparison of various regression techniques for predicting bounding box *** process regression(GPR),combined with particle swarm optimization(PSO)for prediction,achieves the lowest prediction mean square error of all the regression techniques examined at *** tuning of GPR using PSO significantly minimizes the regression *** of the experiment pave the way for its extension to various real-time applications such as crowd management in malls,surveillance systems,and various Internet of Things scenarios.

关键词： LiDAR Data acquisition Bounding box Gaussian process regression Particle swarm optimization(PSO)

Readmission rate and early complications in patients undergoing total knee arthroplasty:A retrospective study

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Orthopedics 2024年第8期15卷 713-721页

作者： tushar Jethi Deepak Jain Rajnish Garg Harpal Singh Selhi Department of Orthopedics Fortis Hospital LudhianaLudhiana 141123PunjabIndia Department of Orthopedics Dayanand Medical College&HospitalLudhiana 141001PunjabIndia Department of Orthopedic Surgery Dayanand Medical College&HospitalLudhiana 141001PunjabIndia

BACKGROUND Total knee arthroplasty(TKA)can improve pain,quality of life,and functional *** uncommon,postoperative complications are extremely consequential and thus must be carefully tracked and communicated to patients to assist their decision-making before *** of the risk factors for complications and readmissions after TKA,taking into account common causes,temporal trends,and risk variables that can be changed or left unmodified,will benefit this *** To assess readmission rates,early complications and their causes after TKA at 30 days and 90 days *** This was a prospective and retrospective study of 633 patients who underwent TKA at our hospital between January 1,2017,and February 28,*** the 633 patients,28 were not contactable,leaving 609 who met the inclusion *** inpatient and outpatient hospital records were retrieved,and observations were noted in the data collection *** Following TKA,the 30-day and 90-day readmission rates were determined to be 1.1%(n=7)and 1.8%(n=11),*** unplanned visit rate at 30 days following TKA was 2.6%(n=16)and at 90 days was 4.6%(n=28).At 90 days,the unplanned readmission rate was 1.4%(n=9).Reasons for readmissions included medical(27.2%,n=3)and surgical(72.7%,n=8).Unplanned readmissions and visits within 90 days of follow-up did not substantially differ by age group(P=0.922),body mass index(BMI)(P=0.633),unilateral vs bilateral TKA(P=0.696),or patient comorbidity status(30-day P=0.171 and 90-day P=0.813).Reoperation rates after TKA were 0.66%(n=4)at 30 days and 1.15%(n=8)at 90 *** average length of stay was 6.53 *** In this study,there was a low readmission rate following *** was no significant correlation between readmission rate and patient factors such as age,BMI,and co-morbidity status.

关键词： Total knee arthroplasty Length of stay Readmission Rates Causes Risk factors Prospective Retrospective Follow-up Reoperation

Enhanced termination of zinc and cadmium ions from wastewater employing plain and chitosan-modified mxenes: synthesis, characterization,and adsorption performance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green Chemical Engineering 2024年第3期5卷 339-347页

作者： Njood R.Azeez Suhaib S.Salih Mohammed Kadhom Harith N.Mohammed tushar K.Ghosh Department of Chemical Engineering College of Engineering University of Tikrit Department of Environmental Science College of Energy and Environmental Science Al-Karkh University of Science Department of Nuclear Science & Engineering Institute University of Missouri-Columbia

Zinc and cadmium pollutants cause a significant environmental effect that cannot be ignored. Due to their considerable amount in an aqueous environment, industries are seeking suitable adsorbents that are environmentally friendly and inexpensive for removing metals from wastewater before disposing of them in surface waters. This research employed original MXene(MX) and chitosan-modified MXene(CSMX) to extract zinc(Zn(Ⅱ)) and cadmium(Cd(Ⅱ)) metal ions from water-based solutions. The composite material produced was analyzed using techniques such as X-ray Diffraction(XRD), Scanning Electron Microscopy(SEM), Fourier Transform Infrared Spectroscopy(FTIR), and Brunauer-Emmett-Teller(BET). The effects of contact duration, p H of the solution, and initial concentration of metal ions on the adsorption process of Zn(Ⅱ) and Cd(Ⅱ) onto both MX and CSMX composites were investigated. MX and prepared CSMX composite presented a high adsorption capacity for both studied heavy metals, which were 91.55 and 73.82 mg/g for Zn(Ⅱ) and Cd(Ⅱ) onto MX, 106.84 and 93.07 mg/g for Cd(Ⅱ) and Zn(Ⅱ) onto CSMX composite, respectively. Furthermore, the maximum competitive adsorption capacities for Zn(Ⅱ) onto MX and CSMX composites are 77.29 and 93.47 mg/g, and for are Cd(Ⅱ)60.30 and 79.66 mg/g, respectively. Hence, the removal capacities for both single and competitive metal ions were superior to CSMX composite. However, the adsorption capacities after five successive regeneration sequences were only dropped by 13.2% for Zn(Ⅱ) and 17.4% for Cd(Ⅱ) onto the CSMX composite compared to the first cycle. These results confirm that both metals could be efficiently terminated from wastewater, which makes the prepared CSMX composite a favorable candidate adsorbent in practical applications.

关键词： Adsorption Chitosan MXene Zn(II) Cd(II) Wastewater

Liver transplantation for hepatocellular carcinoma in India: Are we ready for 2040?

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

World Journal of Transplantation 2024年第1期14卷 141-153页

作者： Hirak Pahari Amruth Raj Ambreen Sawant Dipak S Ahire Raosaheb Rathod Chetan Rathi tushar Sankalecha Sachin Palnitkar Vikram Raut Department of Liver Transplant and HPB Surgery Medicover HospitalsNavi Mumbai 410210MaharashtraIndia Department of Liver Transplant Anaesthesia Medicover HospitalsNavi Mumbai 410210MaharashtraIndia Department of Gastroenterology and Hepatology Medicover HospitalsNavi Mumbai 410210India Department of Gastroenterology and Hepatology Medicover HospitalsNavi Mumbai 410210MaharashtraIndia Department of Gastroenterology and Hepatology Medicover HospitalsAurangabad 431003India Department of Gastroenterology and Hepatology Medicover HospitalsNashik 422009India Department of Gastroenterology and Hepatology Medicover HospitalsPune 411026India

BACKGROUND Liver transplantation(LT)for hepatocellular carcinoma(HCC)has been widely researched and is well established *** cornerstone of this treatment lies in the various criteria formulated by expert consensus and *** variations among the criteria are staggering,and the short-and long-term outcomes are *** To study the differences in the current practices of LT for HCC at different centers in India and discuss their clinical implications in the *** We conducted a survey of major centers in India that performed LT in December 2022.A total of 23 responses were *** centers were classified as high-and low-volume,and the current trend of care for patients undergoing LT for HCC was *** Of the 23 centers,35%were high volume center(>500 Liver transplants)while 52%were high-volume centers that performed more than 50 transplants/*** 39%of centers had performed>50 LT for HCC while the percent distribution for HCC in LT patients was 5%–15%in approximately 73%of the *** a few,most centers were divided equally between University of California,San Francisco(UCSF)and center-specific criteria when choosing patients with HCC for LT,and most(65%)did not have separate transplant criteria for deceased donor LT and living donor LT(LDLT).Most centers(56%)preferred surgical resection over LT for a Child A cirrhosis patient with a resectable 4 cm HCC ***-emission tomography-computed tomography(CT)was the modality of choice for metastatic workup in the majority of centers(74%).Downstaging was the preferred option for over 90%of the centers and included transarterial chemoembolization,transarterial radioembolization,stereotactic body radiotherapy and atezolizumab/bevacizumab with varied *** alphafetoprotein(AFP)cut-off was used by 74%of centers to decide on transplantation as well as to downstage tumors,even if they met the *** criteria for successful downstaging v

关键词： Hepatocellular carcinoma Liver transplant India Downstaging Survey Milan University of California,San Francisco Portal vein tumor thrombus Expanded criteria

An Overview of Soil Improvement through Ground Grouting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Geoscience and Environment Protection 2024年第1期12卷 51-63页

作者： Md Ratan Bhuiyan Salequr Rahman Masum Md tushar Parvej S M Sanuwar School of Civil Engineering Hydraulic Engineering Tianjin University Tianjin China College of Civil Engineering and Architecture China Three Gorges University Yichang China

Soil is an essential component of what surrounds us in nature, providing as the basis for our infrastructure and construction. However, soil is not always suitable for construction due to a variety of geotechnical issues such as inadequate bearing capacity, excessive settlement, and liquefaction susceptibility. Through improving the engineering qualities of soil, such as strength, permeability, and stability, ground grouting is a specific geotechnical method used. Using a fluid grout mixture injected into the subsurface, holes are filled and weak or loose strata are solidified as the material seeps into the soil matrix. The approach’s adaptability in addressing soil-related issues has made it more well-known in the fields of civil engineering and construction. In the end, this has improved groundwater management, foundation support, and overall geotechnical performance.

关键词： Grouting Soil Improvement Permeation Grouting Compaction Grouting and Jet Grouting

Formation of Laser-Induced Periodic Surface Structures on Reaction-Bonded Silicon Carbide by Femtosecond Pulsed Laser Irradiation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nanomanufacturing and Metrology 2023年第1期6卷 36-48页

作者： tushar Meshram Jiwang Yan School of Integrated Design Engineering Graduate School of Science and TechnologyKeio UniversityHiyoshi 3-14-1Kohoku-kuYokohama 223-8522Japan Department of Mechanical Engineering Faculty of Science and TechnologyKeio UniversityHiyoshi 3-14-1Kohoku-kuYokohama 223-8522Japan

Reaction-bonded silicon carbide(RB-SiC)is an excellent engineering material with high hardness,stiffness,and resistance to chemical ***,its widespread use is hindered due to the properties mentioned above,making it difficult to machine functional surface structures through mechanical and chemical *** study investigated the fundamental characteristics of laser-induced periodic surface structures(LIPSSs)on RB-SiC via femtosecond pulsed laser irradiation at a wavelength of 1028 ***-spatial-frequency LIPSS(LSFL)and high-spatial-frequency LIPSS(HSFL)formed on the surface along directions perpendicular to the laser *** grains surrounded by a large amount of Si show a reduced threshold for LIPSS *** varying laser fluence and scanning speed,HSFL-LSFL hybrid structures were generated on the SiC *** electron microscopy observations and Raman spectroscopy were carried out to understand the formation mechanism of the hybrid LIPSS.A possible mechanism based on the generation of multiple surface electromagnetic waves due to the nonlinear response of SiC was proposed to explain the hybrid structure ***,the direction of laser scanning with respect to laser polarization affects the uniformity of the generated LIPSS.

关键词： Reaction-bonded silicon carbide Surface texturing Laser-induced periodic surface structure Composite material Hybrid nanostructure

Petrogenesis of the Neoarchean zincian chromite within ultramafic xenoliths,Bastar Craton,India

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Geochimica 2023年第3期42卷 471-487页

作者： Arpita Karmakar tushar Meshram Mohammad Asif Yogesh Pandey Geological Survey of India Vasudha BhawanKumarswamy LayoutBangalore 560111India Geological Survey of India NagpurIndia Geological Survey of India RaipurIndia

The present study reports and discusses the genesis of zincian chromite in the ultramafic xenoliths from the Dongripali area,Bastar craton,Central *** zincian chromite is in the ultramafic xenoliths of Bengpal supracrustal rock hosted by Neoarchaean Bundeli *** zincian chromite shows a range of Cr_(2)O_(3)(39.69 to 51.66 wt%),Al_(2)O_(3)(05.30 wt%to 08.71 wt%),FeO(21.74 wt%to 27.51 wt%),Fe_(2)O_(3)(10.19 wt%to 19.36wt%)with higher ZnO content ranging from 1.73 wt%to 4.08 wt%.Accordingly,their Cr#[Cr/(Cr+Al)]varies in a narrow range from 0.83 to *** calculated melt composition supports metamorphic or post-magmatic nature rather than common occurrences such as inclusion in diamonds,meteorites,and association with any sulfide-rich mineralised *** reveals that the post-magmatic processes play a vital role in transforming chromite to zincian *** empirical thermometric calculation from chromite,amphibole,and pyroxene support their metamorphic origin and formed during low-P and high-T amphibolite grade facies of metamorphism(~700℃).The Neoarchaean granitic magmatism has a significant role in generating and transferring the heat during contact metamorphism with hydration of ultramafic xenoliths and further alteration,i.e.,*** olivine is a major repository for Mn,Zn,and Co in peridotite/ultramafic;these elements get mobilised during the metamorphism and *** is a possible reason for the mobilisation of zinc and incorporation in the chromite within altered *** a result,chromiterich ultramafic xenolith subjected to metamorphic process gets enrichment of Zn and Fe due to elemental *** converts common chromite into zincian chromite,as reported in altered ultramafics elsewhere.

关键词： Zincian chromite Ultramafic Neoarchaean granitic magmatism High-grade metamorphism

维普期刊数据库