检索结果-南通市图书馆

Research on Cavitation Characteristics and Influencing Factors of Herringbone Gear Pump

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第6期139卷 2917-2946页

作者： Jinlong Yang kwang-Hee lee Chul-Hee lee Department of Mechanical Engineering of Inha University Incheon22212South Korea

Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow *** is one of the main hazards that affect the regular operation of the *** on pump cavitation mainly focuses on mixed flow pumps,jet pumps,external spur gear pumps,***,there are few cavitation studies on external herringbone gear *** addition,pumps with different working principles significantly differ in the flow and complexity of the internal flow ***,it is urgent to study the cavitation characteristics of external herringbone gear *** with experimentalmethods,visual research and cavitation area identification are achieved through computation fluid dynamic(CFD),and changing the boundary conditions and shape of the gear rotor is *** simulation yields a head error of only 0.003%under different grid numbers,and the deviation between experimental and simulation results is less than 5%.The study revealed that cavitation causes flow pulsation at the outlet,and the cavitation serious area is mainly distributed in the meshing gap and meshing *** can be inhibited by reducing the speed,increasing the inlet pressure,and changing the helix angle can be *** example,when the inlet pressure is 5 bar,the maximumgas volume fraction in themeshing area is less than 50%.These results provide a reference for optimizing the design and finding the optimal design parameters to reduce or eliminate cavitation.

关键词： Herringbone gear pump cavitation rotating speed inlet pressure helix angle TwinMesh

CLINICAL SIGNIFICANCE OF COMBINED ANTINUCLEAR AND ANTICYTOPLASMIC ANTIBODIES DETECTED BY IMMUNOFLUORESCENCE

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

中华医学杂志(英文版) 1989年第12期102卷 915-915页

作者： tung-kwang lee Henry Rothberger DepartmentofRadiationOncology EastCarolinaUniversitySchoolofMedicine Greenville NorthCarolina27858 USA SectionofRheumatology DepartmentofMedicine BowmanGraySchoolofMedicineofWakeForestUniversity Winston-Salem NorthCar7103 USA

Anti-nuclear antibodies (ANA) combined with anti-cytoplasmic antibodies (ACA) in 0.6% (n=43) of 7 121 consecutive patients referred for ANA screening were observed. Homogeneous/cytoplasmic was the most frequently combined ANA/ACA pattern among 6 different indirect immunofluorescent (IF) combinations. Distribution of diseases was similar in patients with ANA/ACA and those controls with ANA alone. However, the ANA/ACA results were often transitory, especially in systemic lupus erythromatosus (SLE). The appearance of transitory ANA/ACA combinations on serial ANA testing may be useful as a serologic marker for SLE.

关键词：

Utilization of biomarkers for the prognostic prediction of cardiac arrest survivors using a multi-modal approach

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

World Journal of Emergency Medicine 2024年第2期15卷 131-134页

作者： Changshin Kang Yeonho You Jung Soo Park Byeong Kwon Park Jae kwang lee Byung Kook lee Department of Emergency Medicine College of MedicineChungnam National UniversityDaejeon 35015Republic of Korea Department of Emergency Medicine Chungnam National University HospitalDaejoen 35015Republic of Korea Department of Emergency Medicine Konyang University HospitalCollege of MedicineDaejeon 35015Republic of Korea Department of Emergency Medicine Chonnam National University Medical SchoolChonnam National University HospitalGwangju 61469Republic of Korea

International guidelines for post-cardiac arrest care recommend using multi-modal strategies to avoid the withdrawal of life-sustaining therapy(WLST)in patients with the potential for neurological recovery.[1]However,a clear methodology for multi-modal approaches has yet to be ***-specific enolase(NSE)is currently the only recommended biomarker,and the European Resuscitation Council(ERC)and the European SocietyofIntensiveCareMedicine(ESICM)have proposed a cutoff value of 60μg/L at 48 and/or 72 h after the return of spontaneous circulation(ROSC)as a multimodal prognostic tool for predicting poor neurological outcomes.

关键词： cardiac modal return

A Review of Rechargeable Zinc-Air Batteries:Recent Progress and Future Perspectives

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第7期16卷 358-401页

作者： Ghazanfar Nazir Adeela Rehman Jong-Hoon lee Choong-Hee Kim Jagadis Gautam kwang Heo Sajjad Hussain Muhammad Ikram Abeer AAlObaid Seul-Yi lee Soo-Jin Park Department of Nanotechnology and Advanced Materials Engineering Hybrid Materials Research Center(HMC)Sejong UniversitySeoul 05006Republic of Korea Department of Chemical and Biomolecular Engineering Yonsei University50 Yonsei-RoSeodaemun-GuSeoul 03722Republic of Korea Department of Chemistry Inha UniversityIncheon 22212Republic of Korea Solar Cell Applications Research Lab Department of PhysicsGovernment College University LahoreLahore 54000 PunjabPakistan Department of Chemistry College of ScienceKing Saud UniversityP.O.Box 2455Riyadh 11451Saudi Arabia

Zinc-air batteries(ZABs)are gaining attention as an ideal option for various applications requiring high-capacity batteries,such as portable electronics,electric vehicles,and renewable energy *** offer advantages such as low environmental impact,enhanced safety compared to Li-ion batteries,and cost-effectiveness due to the abundance of ***,early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox *** advancements in restructuring the anode,utilizing alternative electrolytes,and developing bifunctional oxygen catalysts have significantly improved *** have achieved battery reversibility over thousands of cycles,introduced new electrolytes,and achieved energy efficiency records surpassing 70%.Despite these achievements,there are challenges related to lower power density,shorter lifespan,and air electrode corrosion leading to performance *** review paper discusses different battery configurations,and reaction mechanisms for electrically and mechanically rechargeable ZABs,and proposes remedies to enhance overall battery *** paper also explores recent advancements,applications,and the future prospects of electrically/mechanically rechargeable ZABs.

关键词： Zinc-air batteries Energy storage Affordability Reversibility

Friction reactions induced by selective hydrogenation of textured surface under lubricant conditions

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第1期12卷 174-184页

作者： Naizhou DU Xubing WEI Xiaowei LI Zan CHEN Shiqi LU Jiaqing DING Cunao FENG Kai CHEN Jianghao QIAO Dekun ZHANG kwang-Ryeol lee Tiancai ZHANG School of Materials Science and Physics China University of Mining and TechnologyXuzhou 221116China Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology&EngineeringChinese Academy of SciencesNingbo 315201China Computational Science Center Korea Institute of Science and TechnologySeoul 136-791Republic of Korea Technology Development Department Shipbuilding Technology Research InstituteShanghai 200032China

The passivation of hydrogen atoms and the conformation of textured surfaces under oil-lubricated conditions are effective strategies to obtain amorphous carbon(a-C)films with extremely low *** is critical to understanding the influence mechanism of selective surface hydrogenation on the tribological behaviors of textured a-C film under oil-lubricated *** particular,the interactions of hydrogen atoms and lubricants are confusing,which is enslaved to the in situ characterization *** reactive molecular dynamics(RMD)simulations were conducted to analyze the friction response of textured a-C films with selective hydrogenation surfaces under oil-lubricated *** results indicate that the existence of hydrogen atoms on specific bump sites significantly decreases the friction coefficient(μ)of textured a-C film,which is highly dependent on the surface hydrogen *** repulsion between hydrogen atoms and lubricant molecules prompts the formation of a dense lubricant film on the surface of the mating ***,with the enhancement of the surface hydrogen content,the passivation of the friction interface and the repulsion between hydrogen atoms and lubricants play dominant roles in reducing the friction coefficient instead of hydrodynamic lubrication.

关键词： textured amorphous carbon(a-C) selective hydrogenation oil lubrication friction mechanism reactive molecular dynamics(RMD)

Stable operation of highly loaded pure Si-Fe anode under ambient pressure via carboxy silane-directed robust solid electrolyte interphase

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 568-576页

作者： Guntae Lim Dong Guk Kang Hyeon Gyu lee Yen Hai Thi Tran Kihun An Junghyun Choi kwang Chul Roh Do Youb Kim Seung-Wan Song Department of Chemical Engineering&Applied Chemistry Chungnam National University Daejeon 34134Republic of Korea Energy Storage Materials Center Korea Institute of Ceramic Engineering&TechnologyJinju 52851Republic of Korea Advanced Energy Materials Research Center Korea Research Institute of Chemical TechnologyDaejeon 34114Republic of Korea

Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability ***,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on *** stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only ***-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.

关键词： High-energy Li-ion battery Pure Si-Fe anode without graphite Silane additive SEI layer Suppressed swelling

Correlation of137Cs-induced micronuclei with survival fraction in human HT29 cancer cells

在线全文

学校读者我要写书评

暂无评论

中华医学杂志(英文版) 1996年第3期109卷 248-248页

作者： tung-kwang lee Albert L. Wiley Jr James D. Esinhart Department of Radiation Oncology Leo W. Jenkins Cancer Center East Carolina University School of Medicine Greenville North Carolina USA Center of Biostatistics East Carolina University School of Medicine Greenville North Carolina USA

Submicron Ag-coated Cu particles as filler in sintering paste: Suppression of Ag dewetting and improvement of sinterability by surface modification using stearic acid

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2024年

作者： Yeongjung Kim Yong-Sung Eom kwang-Seong Choi Jong-Hyun lee Department of Materials Science and Engineering Seoul National University of Science and Technology 232 Gongneung-ro Low-Carbon Integration Tech Creative Research Section ETRI 218 Gajeong-ro Materials Research Institute for Future Convergence Seoul National University of Science and Technology 232 Gongneung-ro

Four types of submicron Ag-coated Cu particles with different Ag contents were prepared as sintering paste fillers， and the Ag contents of the particles were measured to be 10， 20， 30， and 40 wt%. Four types of particles （in order of increasing Ag content: A10， A20， A30， and A40） were surface-modified with stearic acid， to suppress the Ag shell dewetting and improve sinterability. The surface-modified particles were mixed with a polyol-based solvent to fabricate a resin-free paste. Subsequently， the pastes were screen-printed onto a slide glass and sintered at 250 ℃ in a nitrogen atmosphere for 1–10 min to form an electrode. The electrical resistivity of the sintered film as a function of sintering time was measured using a four-point probe. All the four surface-modified Cu@Ag particles with different Ag contents exhibited decreased electrical resistivity. Particularly， the largest difference in values after and before the surface modification was observed for A40 with the highest Ag content; the electrical resistivities of the initial and surface-modified particles were 1.51×10-4and 6.67×10-5Ω·cm， respectively， after sintering for 10 min. The findings of this study confirmed that the surface modification using stearic acid effectively suppressed the dewetting of the Ag shell and improved the sinterability of the submicron Cu@Ag particles.

关键词：

Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1900-1911页

作者： kwang Tae Son Chang Hee Cho Myoung Gyun Kim Ji Woon lee School of Mechanical Industrialand Manufacturing EngineeringOregon State UniversityCorvallis OR 97331USA Department of Materials Science Engineering Northwestern UniversityEvanston IL 60208USA Research Institute of Industrial Science and Technology(RIST) Pohang 37673Rep.of Korea Division of Advanced Materials Engineering Kongju National UniversityCheonan 31080Rep.of Korea Center for Advanced Materials and Parts of Powders Kongju National UniversityCheonan 31080Rep.of Korea

Hot torsion tests were performed on the Al-7Mg alloy at the temperature ranging from 300 to 500℃ and strain rates between 0.05 and 5 s^(-1) to explore the progressive dynamic recrystallization(DRX)and texture *** DRX behavior of the alloy manifested two distinct stages:Stage 1 at strain of≤2 and Stage 2 at strains of≥*** Stage 1,there was a slight increase in the DRXed grain fraction(X_(DRX))with predominance of discontinuous DRX(DDRX),followed by a modest change in X_(DRX) until the transition to Stage *** 2 was marked by an accelerated rate of DRX,culminating in a substantial final X_(DRX) of~*** backscattered diffraction(EBSD)analysis on a sample in Stage 2 revealed that continuous DRX(CDRX)predominantly occurred within the(121)[001]grains,whereas the(111)[110]grains underwent a geometric DRX(GDRX)evolution without a noticeable sub-grain ***,a modified Avrami’s DRX kinetics model was utilized to predict the microstructural refinement in the Al-7Mg alloy during the DRX *** this kinetics model did not accurately capture the DDRX behavior in Stage 1,it effectively simulated the DRX rate in Stage *** texture index was employed to assess the evolution of the texture isotropy during hot-torsion test,demonstrating significant improvement(>75%)in texture randomness before the commencement of Stage *** initial texture evolution is attributed to the rotation of parent grains and the substructure evolution,rather than to an increase in X_(DRX).

关键词： Al-7Mg alloys hot deformation hot torsion tests dynamic recrystazlliation microstructure texture