检索结果-南通市图书馆

American Journal of Analytical Chemistry 2013年第9期4卷 451-456页

作者： Fitri Mairizki Athika Rahmah Hilma Radhia Putri Rahmiana Zein Lee Wah Lim toyohide takeuchi Edison Munaf Department of Chemistry Faculty of Engineering Gifu University Gifu Japan Department of Chemistry Faculty of Mathematics and Natural Sciences Andalas Universiy Padang Indonesia

Methacrylate-based monolithic column was prepared in fused-silica capillary (80 ′ 0.32 mm i.d.) by in situ polymerizetion reaction using glycidyl methacrylate as monomer;ethylene dimethacrylate as crosslinker;1-propanol, 1,4-butanediol, and water as porogenic solvents. The monolith matrix was modified with trimethylamine to create strong anion exchanger via ring opening reaction of epoxy groups. The morphology of the monolithic column was studied by using Scanning Electron Microscope (SEM). This column had good mechanical stability and permeability. The effects of various mobile phases for separation of inorganic anions were investigated. Iodate, bromate, nitrite, bromide, and nitrate were separated within 11 min using100 mMpotassium chloride as mobile phase and detected at 210 nm. This method showed good precision of retention time, acceptable linearity and good sensitivity. Under the optimum condition, the RSD of the retention time was in the range of 1.09%-1.75% (n = 6). The calibration curve showed linear relationships between the peak area and the concentration. The limits of detection (LOD) and the limits of quantitation (LOQ) were between 0.08-0.18 mM and 0.26-0.61 mM, respectively. This method was applied to the determination of inorganic anions in tap water and ground water samples.

关键词： Methacrylate-Based Monolithic Column Trimethylamine Ion Chromatography Capillary System Inorganic Anions Water Sample

Modelling the preventive treatment under media impact on tuberculosis:A comparison in four regions of China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Infectious Disease Modelling 2024年第2期9卷 483-500页

作者： Jun Zhang Yasuhiro takeuchi Yueping Dong Zhihang Peng School of Mathematics and Statistics and Key Laboratory of Nonlinear Analysis&Applications(Ministry of Education)Central China Normal UniversityWuhan430079China College of Science and Engineering Aoyama Gakuin UniversityKanagawa252-5258Japan National Key Laboratory of Intelligent Tracking and Forecasting for Infectious Diseases Chinese Center for Disease Control and PreventionBeijing102206China

Preventive treatment for people with latent Tuberculosis infection(LTBI)has aroused our great *** this paper,we propose and analyze a novel mathematical model of TB considering preventive treatment with media *** basic reproduction number R_(0)is defined by the next generation matrix *** the case without media impact,we prove that the disease-free equilibrium is globally asymptotically stable(unstable)if R_(0)1).Furthermore,we obtain that a unique endemic equilibrium exists when R_(0)>1,which is globally asymptotically stable in the case of permanent immunity and no media *** fit the model to the newly reported TB cases data from 2009 to 2019 of four regions in China and estimate the *** we estimatedR_(0)=0.50131 in Henan,R_(0)=1.282>1 in Jiangxi andR_(0)=1.930>1 in Xinjiang imply that TB will continue to persist in these three regions without further prevention and control ***,sensitivity analysis is carried out to illustrate the role of model parameters for TB *** finding reveals that appropriately improving the rate of timely treatment for actively infected people and increasing the rate of individuals with LTBI seeking preventive treatment could achieve the goal of TB *** addition,another interesting finding shows that media impact can only reduce the number of active infections to a limited extent,but cannot change the prevalence of TB.

关键词： Latent tuberculosis infection Preventive treatment Media impact Mathematical model Tuberculosis elimination

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

高效液相色谱－荧光检测法测定蒽和荧蒽

分析测试学报 1995年第3期14卷 83-86页

作者：辛梅华徐金瑞竹内蘴英泉州华侨大学应用化学系日本国岐阜大学工学部

采用高效液相色谱－荧光检测法测定多环芳烃化合物蒽和荧蒽。在Ｓｈｉｍ－ｐａｃｋＣＬＣ－ｐｈｅｎｙｌ柱上，以５０％的乙腈水溶液作流动相，１２ｍｉｎ内实现了两组分的同时分离测定。线性范围为０～８０μｇ／ｍＬ，检测限低于５０... 详细信息

采用高效液相色谱－荧光检测法测定多环芳烃化合物蒽和荧蒽。在Ｓｈｉｍ－ｐａｃｋＣＬＣ－ｐｈｅｎｙｌ柱上，以５０％的乙腈水溶液作流动相，１２ｍｉｎ内实现了两组分的同时分离测定。线性范围为０～８０μｇ／ｍＬ，检测限低于５０ｎｇ／ｍＬ，相对标准偏差小于１％。

关键词：高效液相色谱荧光检测蒽荧蒽多环芳烃

Enhancement of the thermoelectric performance of half-metallic full-Heusler Mn_(2)VAl alloys via antisite defect engineering and Si partial substitution

在线全文

学校读者我要写书评

暂无评论

Journal of Materiomics 2024年第2期10卷 511-519页

作者： Hezhang Li Kei Hayashi Zhicheng Huang Hiroto takeuchi Gakuto Kanno Jing-Feng Li Yuzuru Miyazaki Department of Precision Instrument Tsinghua UniversityBeijing100084China Department of Applied Physics Graduate School of EngineeringTohoku UniversitySendai980-8579Japan State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijing100084China

A half-metallic full-Heusler Mn_(2)VAl alloy is a potential p-type thermoelectric material that can directly generate electricity from waste heat via the Seebeck *** practical use,the Seebeck coefficient S of Mn_(2)VAl should be increased while maintaining a high electrical conductivity s from its half-metallic ***,we achieved this objective through antisite defect ***,it was predicted that the S was maximized by regulating partial density of states of majority-spin sp-electrons through the control of the fraction of antisite defect,f_(AD),between V and Al atoms in Mn_(2)***-mentally,a significant increase in S and a slight decrease in s were observed for an Mn_(2)VAl sample with an optimal fAD=33%,enhancing the thermoelectric power factor PF by 2.7 times from an Mn_(2)VAl sample with fAD=14%.Furthermore,we combined the antisite defect engineering with a partial substitution *** Mn_(2)V(Al_(0.96)Si_(0.04))sample with fAD=33%exhibited the highest PF=4.5×10^(-4)W·m^(-1)·K^(-2)at 767 K among the *** maximum dimensionless figure-of-merit zT of the Mn_(2)V(Al_(0.96)Si_(0.04))sample with f_(AD)=33%was measured to be 3.4×10^(-2)at 767 K,which is the highest among the p-type half-metallic full-Heusler alloys.

关键词： Half metal Full-Heusler alloy Thermoelectric properties Antisite defect Partial substitution

Ultrasound-guided peripheral nerve blocks for anterior cutaneous nerve entrapment syndrome after robot-assisted gastrectomy: A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Gastrointestinal Surgery 2024年第8期16卷 2719-2723页

作者： Yukiko Saito Hirohisa takeuchi Joho Tokumine Ryuji Sawada Kunitaro Watanabe Tomoko Yorozu Department of Anesthesiology Kyorin University School of MedicineTokyo 181-8611Japan Department of Surgery Kyorin University School of MedicineTokyo 181-8611Japan

BACKGROUND Anterior cutaneous nerve entrapment syndrome(ACNES)is a condition mani-festing with pain caused by strangulation of the anterior cutaneous branch of the lower intercostal *** case report aims to provide new insight into the selection of peripheral nerve blocks for the ACNES *** SUMMARY A 66-year-old woman manifested ACNES after a robot-assisted distal *** ultrasound-guided rectal sheath block was effective for pain triggered by the port ***,the sudden severe pain,which radiated laterally from the previous site,remained.A transversus abdominis plane block was performed for the remaining pain and effectively relieved *** In this case,the trocar port was inserted between the rectus and transverse abdominis *** intercostal nerves might have been entrapped on both sides of the rectus and transversus abdominis ***,rectus sheath and transverse abdominis plane blocks were required to achieve complete pain *** the best of our knowledge,this is the first report on use of a combination of rectus sheath and transverse abdominis plane blocks for pain relief in ACNES.

关键词： Anterior cutaneous nerve entrapment syndrome Rectus sheath block Trans-verse abdominal plane block Hydrodissection Robot-assisted gastrectomy Case report

Dependence of Lower Molding Temperature Limit and Molding Time on Molding Mechanism in Dental Thermoforming

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Materials Sciences and Applications 2024年第9期15卷 350-357页

作者： Mutsumi Takahashi Masatoshi takeuchi Department of Physiology The Nippon Dental University School of Life Dentistry at Niigata Niigata Japan takeuchi Dental Clinic Kyoto Japan

Effectiveness and safety of a sports mouthguard depend on its thickness and material, and the thermoforming process affects these. The purpose of this study was to clarify the effects of differences in molding mechanisms on the lower molding temperature limit and molding time in dental thermoforming. Ethylene vinyl acetate resin mouthguard sheet and two thermoforming machines;vacuum blower molding machine and vacuum ejector/pressure molding machine were used. The molding pressures for suction molding were −0.018 MPa for vacuum blower molding and −0.090 MPa for vacuum ejector molding, and for pressure molding was set to 0.090 MPa or 0.450 MPa. Based on the manufacturer’s standard molding temperature of 95˚C, the molding temperature was lowered in 2.5˚C increments to determine the lower molding temperature limit at which no molding defects occurred. In order to investigate the difference in molding time depending on the molding mechanism, the duration of molding pressure was adjusted in each molding machine, and the molding time required to obtain a sample without molding defects was measured. The molding time of each molding machine were compared using one-way analysis of variance. The lower molding temperature limit was 90.0˚C for the vacuum blower machine, 77.5˚C for the vacuum ejector machine, 77.5˚C for the pressure molding machine at 0.090 MPa, and 67.5˚C for the pressure molding machine at 0.45 MPa. The lower molding temperature limit was higher for lower absolute values of molding pressure. The molding time was shorter for pressure molding than for suction molding. Significant differences were observed between all conditions except between the pressure molding machine at 0.090 MPa and 0.45 MPa (P < 0.01). A comparison of the differences in lower molding temperature limit and molding time due to molding mechanisms in dental thermoforming revealed that the lower molding temperature limit depends on the molding pressure and that the molding time is longer for suc

关键词： Thermoforming Suction Molding Pressure Molding Lower Molding Temperature Limit Molding Time

Caspase-11 mediated inflammasome activation in macrophages by systemic infection of *** exacerbates arthritis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Oral Science 2024年第3期16卷 499-514页

作者： Tokuju Okano Hiroshi Ashida Noriko Komatsu Masayuki Tsukasaki Tamako Iida Marie Iwasawa Yuto Takahashi Yasuo takeuchi Takanori Iwata Miwa Sasai Masahiro Yamamoto Hiroshi Takayanagi Toshihiko Suzuki Department of Bacterial Pathogenesis Infection and Host ResponseGraduate School of Medical and Dental SciencesTokyo Medical and Dental UniversityTokyoJapan Department of Immunology Graduate School of Medicine and Faculty of MedicineThe University of TokyoTokyoJapan Department of Osteoimmunology Graduate School of Medicine and Faculty of MedicineThe University of TokyoTokyoJapan Department of Lifetime Oral Health Care Science Graduate School of Medical and Dental SciencesTokyo Medical and Dental UniversityTokyoJapan Department of Periodontology Graduate School of Medical and Dental SciencesTokyo Medical and Dental UniversityTokyoJapan Department of Immunoparasitology Research Institute for Microbial DiseasesOsaka UniversityOsakaJapan

Clinical studies have shown that Aggregatibacter actinomycetemcomitans(***)is associated with aggressive periodontitis and can potentially trigger or exacerbate rheumatoid arthritis(RA).However,the mechanism is poorly ***,we show that systemic infection with *** triggers the progression of arthritis in mice anti-collagen antibody-induced arthritis(CAIA)model following IL-1βsecretion and cell infiltration in paws in a manner that is dependent on caspase-11-mediated inflammasome activation in *** administration of polymyxin B(PMB),chloroquine,and anti-CD11b antibody suppressed inflammasome activation in macrophages and arthritis in mice,suggesting that the recognition of lipopolysaccharide(LPS)in the cytosol after bacterial degradation by lysosomes and invasion via CD11b are needed to trigger arthritis following inflammasome activation in *** data reveal that the inhibition of caspase-11-mediated inflammasome activation potentiates aggravation of RA induced by infection with *** work highlights how RA can be progressed by inflammasome activation as a result of periodontitis-associated bacterial infection and discusses the mechanism of inflammasome activation in response to infection with ***.

关键词： CD11b inflam infection

蔗渣水解液及发酵液中糖及糖醇的高效液相色谱分析

在线全文

学校读者我要写书评

暂无评论

分析测试学报 1997年第6期16卷 44-46页

作者：辛梅华徐金瑞方柏山竹内豊英侨大学应用化学系州362011 侨大学化工与生化工程系州362011 本歧阜大学工学部

采用ＨＰＬＣ测蔗渣水解液及发酵液中木糖、木糖醇等。在ＳｐｈｅｒｉｓｏｒｂＮＨ２柱上用乙腈＋水（８０＋２０）分离，示差折光检测器检测，１５ｍｉｎ内同时分离测定木糖、木糖醇及其它五种糖。线性范围在０～７．５ｇ／Ｌ，相... 详细信息

采用ＨＰＬＣ测蔗渣水解液及发酵液中木糖、木糖醇等。在ＳｐｈｅｒｉｓｏｒｂＮＨ２柱上用乙腈＋水（８０＋２０）分离，示差折光检测器检测，１５ｍｉｎ内同时分离测定木糖、木糖醇及其它五种糖。线性范围在０～７．５ｇ／Ｌ，相对偏差小于４．１％。

关键词：高效液相色谱糖类化合物木糖木糖醇蔗渣水解

Biology and treatment of cervical adenocarcinoma

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Cancer Research 2016年第2期28卷 254-262页

作者： Satoshi takeuchi Department of Obstetrics and Gynecology School of MedicineIwate Medical University

Uterine cervical adenocarcinoma （ADC） has been increasing in its prevalence world widely despite the decrease of squamous cell carcinoma （SCC）. It comprises nearly 20-25% of the all cervical malignancy in developed countries. The worse biological behavior had been reported in patients with intermediateand high risk factors after surgery, and in advanced stage over III, radiotherapy （RT） alone and concurrent chemo-radiotherapy （CCRT） with cisplatin was not always effective. As for chemotherapy （CT）, the iaduction CT has not established, as well. Further molecular targeted therapy （MTT） has been studied. The targets of oncogenic driver mutations were vascular endothelial growth factor （VEGF） in SCC, or tyrosine kinase （TK） of endothelial growth factor receptor 2 （EGFR2, Her2/neu）-Ras-MAPK-ERK pathway. Bevacizumab （Bey, anti-VEGF monoclonal antibody） is considered as one of key agent with paclitaxel and carboplatin in SCC, but not for ADC. This article focuses on up-to-date knowledge of biology and possible specific therapeutic directions to explore in the management of cervical ADC.

关键词： Cervical cancer adenocarcinoma (ADC) atypical glandular cell (AGC) gastric type adenocarcinoma (GAS)