检索结果-南通市图书馆

Chinese Journal of Aeronautics 2024年第4期37卷 421-435页

作者： Shihao xu Changzhu wei Litao ZHANG Rongjun MU School of Astronautics Harbin Institute of TechnologyHarbin 150001China Beijing Institute of Control&Electronics Technology Beijing 100038China

This paper develops a novel Neural Network(NN)-based adaptive nonsingular practical predefined-time controller for the hypersonic morphing aircraft subject to actuator faults. Firstly, a novel Lyapunov criterion of practical predefined-time stability is established. Following the proposed criterion, a tangent function based nonsingular predefined-time sliding manifold and the control strategy are developed. Secondly, the radial basis function NN with a low-complexity adaptation mechanism is incorporated into the controller to tackle the actuator faults and uncertainties. Thirdly, rigorous theoretical proof reveals that the attitude tracking errors can converge to a small region around the origin within a predefined time, while all signals in the closed-loop system remain bounded. Finally, numerical simulation results are presented to verify the effectiveness and improved performance of the proposed control scheme.

关键词： Hypersonic morphing aircraft(HMA) Neural network(NN) Adaptive control Practical predefined-time control Fault-tolerant control

维普期刊数据库

Origin of condensate oil and natural gas in Bozhong 19-6 gas field,Bohai Bay Basin

在线全文

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第1期5卷 54-62页

作者： Jianyong xu wei Li CNOOC Research Institute Co.Ltd. Beijing100028China

The discovery of the Bozhong 19-6 gas field has opened a new frontier for deep gas exploration in the Bohai Bay Basin,with a great potential for further gas ***,poor understanding of oil and gas origin has been limiting the exploration progress in this *** clarify the origin of condensate oil and gas in Bozhong 19-6 gas field,this study adequately utilized the organic geochemical analysis data to investigate the composition and geochemical characteristics of condensate oil and natural gas,and analyzed the relationship between condensate oil and the three sets of source rocks in the nearby *** show that the lighter components dominate the condensate oil,with a forward type *** parent material of crude oil was primarily deposited in a shallow,clay-rich,low-salinity,weakly reducing aquatic *** condensate and natural gas have similar parent source characteristics and maturity,with Ro ranging from 1.4%to 1.6%.Both are products of high maturity stage,indicating that they are hydrocarbon compounds produced by the same group of source rocks in the same ***-sources correlation shows that condensate oil and gas mainly originate from the source rocks of the third member of Shahejie Formation in the nearby subsags of the Bozhong 19-6 structural belt.

关键词： Bozhong Sag Natural gas Condensate oil Light hydrocarbon Gas-source correlation Oil-source correlation

CO2-Induced Modulation of Si-O Bonds for Low Temperature Plastic Deformation of Amorphous Silica Nanoparticles with Enhanced Photoluminescence

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第4期7卷 404-412页

作者： Kang Huang Wenzhuo Wu Song xu Pengfei Yan Zhongming wei Qun xu Henan Institute of Advanced Technology Zhengzhou University College of Materials Science and Engineering Zhengzhou University State Key Laboratory of Superlattices and Microstructures Institute of Semiconductors Chinese Academy of Sciences

Modulation of Si-O bonds under mild conditions has been a challenging issue in the field of material science,which is critical to manufacture highperformance silica-based optical and photonic ***,we introduce a nondestructive technique to achieve Si-O bond rearrangement,leading to plastic deformation and photoluminescence enhancement of amorphous silica nanoparticles using supercritical carbon dioxides in EtOH/H2O solution under mild temperature.

关键词： amorphous silica anisotropic stress photoluminescence plastic deformation supercritical CO2

On-surface synthesis and characterization of polyynic carbon chains

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

National Science Review 2024年第3期11卷 192-199页

作者： Wenze Gao wei Zheng Luye Sun Faming Kang Zheng Zhou wei xu Interdisciplinary Materials Research Center School of Materials Science and Engineering Tongji University

Carbyne, an elusive sp-hybridized linear carbon allotrope, has fascinated chemists and physicists for decades. Due to its high chemical reactivity and extreme instability, carbyne was much less explored in contrast to the sp2-hybridized carbon allotropes such as graphene. Herein, we report the on-surface synthesis of polyynic carbon chains by demetallization of organometallic polyynes on the Au（111） surface;the longest one observed consists of ～60 alkyne units（120 carbon atoms）. The polyynic structure of carbon chains with alternating triple and single bonds was unambiguously revealed by bond-resolved atomic force microscopy. Moreover, an atomically precise polyyne, C14, was successfully produced via tip-induced dehalogenation and ring-opening of the decachloroanthracene molecule(C14Cl10) on a bilayer NaCl/Au（111） surface at 4.7 K, and a band gap of 5.8 eV was measured by scanning tunnelling spectroscopy,in a good agreement with the theoretical HOMO–LUMO gap（5.48 eV）.

关键词： polyyne scanning probe microscopy carbon allotrope on-surface synthesis organometallic polyyne

Steady-state Voltage Security-constrained Optimal Frequency Control for Weak HVDC Sending-end AC Power Systems

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第2期12卷 658-669页

作者： Qiangqiang Wang Liangzhong Yao Jian xu Yuping Zheng wei Li wei Wang School of Electrical Engineering and Automation Wuhan UniversityWuhan 430072China Hubei Engineering and Technology Research Center for AC/DC Intelligent Distribution Network(Wuhan University) Wuhan 430072China State Key Laboratory of Smart Grid Protection and Control NARI Group Corporation(State Grid Electric Power Research Institute)Nanjing 211106China

Due to the fact that a high share of renewable energy sources(RESs)are connected to high-voltage direct current(HVDC)sending-end AC power systems,the voltage and frequency regulation capabilities of HVDC sending-end AC power systems have *** has resulted in potential system operating problems such as overvoltage and overfrequency,which occur simultaneously when block faults exist in the HVDC *** this study,a steady-state voltage security-constrained optimal frequency control method for weak HVDC sending-end AC power systems is *** integrated virtual inertia control of RESs is employed for system frequency *** dynamic reactive power compensation devices are utilized to control the voltage of all nodes meet voltage security ***,an optimization model that simultaneously considers the frequency and steady-state voltage security constraints for weak HVDC sending-end AC power systems is *** optimal control scheme with the minimum total cost of generation tripping and additional dynamic reactive power compensation required is obtained through the optimization *** are conducted on a modified IEEE 9-bus test system and practical Qing-Yu line commutated converter based HVDC(LCC-HVDC)sending-end AC power system to verify the effectiveness of the proposed method.

关键词： Renewable energy source(RES) high-voltage direct current(HVDC) AC power system optimal frequency control steady-state voltage security dynamic reactive power compensation

维普期刊数据库

Characteristics and geological significance of the stress state of the lithosphere in the Qinghai-Tibetan Plateau and its neighboring areas

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第6期67卷 1836-1855页

作者： Qianwen ZHANG Ya xu wei CHU Shupeng LU Key Lab of Petroleum Resource Research Institute of Geology and GeophysicsChinese Academy of SciencesBeijing 100029China College of Earth and Planetary Sciences University of Chinese Academy of SciencesBeijing 100049China

The present-day lithospheric stress state of the Qinghai-Tibetan Plateau and neighboring areas is controlled by both the lithosphere itself and the underlying *** other words,the stress is affected by the gravitational potential energy(GPE)difference caused by the change in the density distribution within the lithosphere and the drag force on the base of the lithosphere caused by mantle *** study of the lithospheric stress state plays an important role in further understanding the dynamic background and mechanism for the evolution of the Qinghai-Tibetan *** this study,the Crust1.0 crustal density model combined with the S40RTS mantle shear wave velocity variation model was used to calculate the *** EGM2008gravity field model was used to calculate the drag force from mantle convection at the base of the *** lithospheric and joint stress fields of the two sources were obtained by solving the force balance under the thin sheet *** way,we could comprehensively analyze the characteristics of the stress state within the *** regions were classified according to the GPE stress field,mantle drag force stress field,the relative magnitude of the two stress fields,and correlation between the two stress fields and surface *** lithospheric stress fields of the Tarim Basin and other stable blocks are mainly controlled by the GPE *** lithospheric stress field in the collision zone between the Indian Plate and the QinghaiTibetan Plateau is predominantly controlled by the deep mantle drag *** lithospheric stress field in the interior of the Plateau is controlled by both GPE and mantle *** correlation between the lithospheric stress field and surface deformation at the southeast margin of the Qinghai-Tibetan Plateau is *** is hypothesized that the presence of lower crustal flow with lower effective viscosity leads to crust-mantle decoupling,and the mantle drag force has a weaker influe

关键词： Qinghai-Tibetan Plateau Gravitational potential energy Mantle convection Lithospheric deviatoric stress field GPS strain rate field

维普期刊数据库

Design of an automated robotic microinjection system for batch injection of zebrafish embryos and larvae

在线全文

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第1期10卷 89-103页

作者： Zhongyi Guo Nana Ai wei Ge Qingsong xu Department of Electromechanical Engineering Faculty of Science and TechnologyUniversity of MacaoMacaoChina Department of Biomedical Sciences and Centre of Reproduction Development and Aging(CRDA)Faculty of Health SciencesUniversity of MacaoMacaoChina

This paper presents the design of a vision-based automated robotic microinjection system for batch injection of both zebrafish embryos and larvae.A novel visual recognition algorithm based on an automatic threshold and excessive dilatation is introduced to accurately identify the center of zebrafish embryos and larval yolks.A corresponding software system is developed using the producer-consumer model as the framework structure,and a friendly user interface is designed to allow operators to choose from a range of desired functions according to their different *** addition,a novel microstructural agarose device is designed and fabricated to simultaneously immobilize mixed batches of embryos and ***,a prototype microinjection system is fabricated by integrating hardware devices with visual *** experimental study is conducted to verify the performance of the robotic microinjection *** results show that the reported system can accurately identify zebrafish embryos and larvae and efficiently complete batch microinjection tasks of the mixtures with an injection success rate of 92.05%in 13.88 s per *** with manual and existing microinjection systems,the proposed system demonstrates the merits of versatility,excellent efficiency,high success rate,high survival rate,and sufficient stability.

关键词： zebra automated hardware

Optimizing mechanical properties of HIPS fabricated with low-cost desktop 3D printers:investigating the impact of process parameters

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第2期12卷 379-395页

作者： Jin-Ting xu Guang-wei Zhang Man-Man Chen School of Automotive Engineering Dalian University of TechnologyDalian116024People’s Republic of China

Recently,low-cost desktop three-dimensional(3D)printers,employing the fused deposition modeling(FDM)technique,have gained widespread ***,most users cannot test the strength of printed parts,and little information is available about the mechanical properties of printed high-impact polystyrene(HIPS)parts using desktop 3D *** this study,the user-adjustable parameters of desktop 3D printers,such as crisscross raster orientation,layer thickness,and infill density,were *** experimental plans were designed using the Box-Behnken method,and tensile,3-point bending,and compression tests were carried out to determine the mechanical responses of the printed *** prediction models of the process parameters were regressed to produce the optimal combination of process *** experimental results showcase that the crisscross raster orientation has significant effects on the flexural and compression strengths,but not on the tensile *** an increase in the layer thickness,the tensile,flexural,and compression strengths first decreased and then increased,reaching their minimum values at approximately 0.16 mm layer *** addition,they all increased with an increase of infill *** was demonstrated that when the raster orientation,layer thickness,and infill density were 13.08°/–76.92°,0.09 mm,and 80%,respectively,the comprehensive mechanical properties of the printed HIPS were *** results can help end-users of desktop 3D printers understand the effects of process parameters on the mechanical properties,and offer practical suggestions for setting proper printing parameters for fabricating HIPS parts.

关键词： Desktop three-dimensional(3D)printers Fused deposition modeling(FDM) High-impact polystyrene(HIPS) Process parameters

Crystal facet-dependent CO_(2) cycloaddition to epoxides over ZnO catalysts

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第5期18卷 49-59页

作者： Yongjian wei Ying Li Yunfei xu Yinghui Sun Tong xu Haiou Liang Jie Bai Inner Mongolia Key Laboratory of Industrial Catalysis Hohhot 010051China College of Chemical Engineering Inner Mongolia University of TechnologyHohhot 010051China

With regard to green chemistry and sustainable development,the fixation of CO_(2) into epoxides to form cyclic carbonates is an attractive and promising pathway for CO_(2) *** oxides,renowned as promising eco-friendly catalysts for industrial production,are often undervalued in terms of their impact on the CO_(2)addition *** this work,we successfully developed ZnO nanoplates with(002)surfaces and ZnO nanorods with(100)surfaces via morphology-oriented regulation to explore the effect of crystal faces on CO_(2) *** quantitative data obtained from electron paramagnetic resonance spectroscopy indicated that the concentration of oxygen vacancies on the ZnO nanoplate surfaces was more than twice that on the ZnO nanorod *** functional theory calculations suggested that the(002)surfaces have lower adsorption energies for CO_(2) and epichlorohydrin than the(100)*** a result,the yield of cyclochloropropene carbonate on the ZnO nanoplates(64.7%)was much greater than that on the ZnO nanorods(42.3%).Further evaluation of the reused catalysts revealed that the decrease in the oxygen vacancy concentration was the primary factor contributing to the decrease in catalytic *** on these findings,a possible catalytic mechanism for CO_(2) cycloaddition with epichlorohydrin was *** work provides a new idea for the controllable preparation of high-performance ZnO catalysts for the synthesis of cyclic carbonates from CO_(2) and epoxides.

关键词： carbon dioxide cycloaddition zinc oxide crystal face oxygen vacancy

Optical coherence tomography angiography metrics in different stages of diabetic macular edema

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Eye and Vision 2024年第3期10卷 13-20页

作者： Ruyi Han Ruowen Gong wei Liu Gezhi xu Eye Institute and Department of Ophthalmology Eye and ENT Hospital of Fudan University83 Fenyang RoadShanghai200031People’s Republic of China Key Laboratory of Visual Impairment and Restoration Fudan UniversityShanghaiPeople’s Republic of China Key Laboratory of Myopia(Fudan University) Chinese Academy of Medical SciencesNational Health CommissionShanghaiPeople’s Republic of China

Background To investigate the optical coherence tomography angiography(OCTA)characteristics of diabetic macular edema(DME)at different *** This study was a cross-sectional *** diagnosed with DME were *** was classified into early,advanced,and severe *** vessel density(VD)in the superficial vascular plexus(SVP),deep vascular plexus(DVP)and foveal avascular zone(FAZ)parameters,including FAZ area,FAZ perimeter,acircularity index and foveal VD in a 300-μm-wide region around the FAZ(FD-300),were calculated by the AngioVue software.A multivariate generalized estimating equation was used to evaluate the associations between visual acuity and OCTA *** Ninety-two eyes from 74 patients with DME were included in this *** to early(P=0.006)and advanced DME(P=0.003),the acircularity index was higher in severe *** whole and parafoveal VD in the DVP decreased in eyes with severe DME compared to early DME(P=0.018,P=0.005,respectively)and advanced DME(P=0.035,P=0.012,respectively).In the multivariate generalized estimating equation,DME severity,FAZ area and foveal thickness were positively associated with worse visual acuity(P=0.001,P=0.007 and P=0.001,respectively).Conclusion Compared to early and advanced DME,severe DME showed increased irregularity in the FAZ and more extensive vessel damage in the *** severity level of DME,larger FAZ area,and increased foveal thickness could be risk factors for poor visual *** registration The protocol was published in the Chinese Clinical Trial Registry(ChiCTR2000033082).

关键词： Optical coherence tomography angiography Diabetic macular edema Vessel density Acircularity index