检索结果-南通市图书馆

Journal of Iron and Steel Research International 2024年第8期31卷 1886-1899页

作者： Zhan-peng tie Xue-yuan Jiang Hai-yan Tang ·Gen Li Yu-hang wang Jia-quan Zhang School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China Continuous Casting Business Section CISDI Engineering Co.Ltd.Chongqing 401122China Special Steel Institute Central Iron and Steel Research Institute Co.Ltd.Beijing 100081China

The influence of Al content(0.0053,0.0171,and 0.0578 wt.%)on the modification behavior of non-metallic inclusions in 20CrMoVTiB steel treated with rare earth elements was studied through high-temperature experiments and thermodynamic *** results showed that the modification products varied with the Al content in steel under 0.01 wt.%of Ce *** formation sequence of typical rare earth inclusions in steel with the increase in Al content was Ce_(2)O_(3)→CeAlO_(3)→CeAl_(11)O_(18),and the final stable products were highly Al content *** the Al content was 0.0053 wt.%,the stable phase in steel was Ce2O3;while the[Al]reached 0.0171 wt.%,the stable phase became CeA1O_(3).As the A1 content reached 0.0578 wt.%,CeAl_(11)O_(18) became the stable *** a result,increasing the Al content could inhibit the precipitation of Ce_(2)O_(3) inclusions in steel while promote the formation of CeAIO3 and CeAl_(11)O_(18) *** addition,both Ca treatment and Ce treatment could effectively refine the size of inclusions in steel by changing their ***,the feeding amount of Ca wire into molten steel should be appropriately reduced under the condition of adding Ce simultaneously,which is expected to be beneficial for an improved Ce treatment effect.

关键词： Rare earth Al content Steel Inclusion Thermodynamics Ca treatment

Study of the Lift Force Induced by An Interceptor on A High-Speed Mono-Hull:The Affecting Factors and Estimation Formula

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第4期38卷 557-571页

作者： DENG Rui HU Yu-xiao HUANG Si-chong SONG Zhi-jie wang Shi-gang WU tie-cheng School of Ocean Engineering and Technology Sun Yat-sen Universityand Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)Zhuhai 519082China

To find a better way to estimate the lift force induced by an interceptor on a high-speed mono-hull ship,a series of high-speed mono-hull ship models are designed and investigated under different *** lift forces are obtained by numerical calculations and validated by a model test in a towing *** factors that influence the force are the interceptor height,velocity,draft,and deadrise *** relationship between each factor and the induced lift force is investigated and *** found that the induced lift mainly depends on the interceptor height and advancing velocity,and is proportional to the square of the interceptor height and *** results also showed that the effects of the draft and deadrise angle are relatively less important,and the relationship between the induced lift and these two factors is generally *** on the results,a formula including the combined effect of all factors used to estimate the lift force induced by the interceptor is developed based on systematic *** proposed formula could be used to estimate the lift force induced by interceptors,especially under high-speed condition.

关键词： high-speed mono-hull ship interceptor lift force formula lift force towing tank test computational fluid dynamics

Heterogeneous population distribution enhances resistance to wheat lodging by optimizing the light environment

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2024年第7期23卷 2211-2226页

作者： Yibo Hu Feng Qin Zhen Wu Xiaoqin wang Xiaolong Ren Zhikuan Jia Zhenlin wang Xiaoguang Chen tie Cai College of Agronomy Northwest A&F UniversityYangling 712100China Key Laboratory of Crop Physi-Ecology and Tillage Science in Northwestern Loess Plateau Ministry of Agriculture and Rural AffairsNorthwest A&F UniversityYangling 712100China College of Agronomy Shandong Agricultural University/State Key Laboratory of Crop BiologyTai’an 271018China Xuzhou Institute of Agricultural Sciences in Jiangsu Xuhuai Area Xuzhou 221131China

Lodging is still the key factor that limits continuous increases in wheat yields today,because the mechanical strength of culms is reduced due to low-light stress in populations under high-yield *** mechanical properties of the culm are mainly determined by lignin,which is affected by the light ***,little is known about whether the light environment can be sufficiently improved by changing the population distribution to inhibit culm ***,in this study,we used the wheat cultivar“Xinong 979”to establish a low-density homogeneous distribution treatment(LD),high-density homogeneous distribution treatment(HD),and high-density heterogeneous distribution treatment(HD-h)to study the regulatory effects and mechanism responsible for differences in the lodging resistance of wheat culms under different population *** with LD,HD significantly reduced the light transmittance in the middle and basal layers of the canopy,the net photosynthetic rate in the middle and lower leaves of plants,the accumulation of lignin in the culm,and the breaking resistance of the culm,and thus the lodging index values increased significantly,with lodging rates of 67.5%in 2020–2021 and 59.3%in 2021–*** HD-h,the light transmittance and other indicators in the middle and basal canopy layers were significantly higher than those under HD,and the lodging index decreased to the point that no lodging *** with LD,the activities of phenylalanine ammonia-Lyase(PAL),4-coumarate:coenzyme A ligase(4CL),catechol-O-methyltransferase(COMT),and cinnamyl-alcohol dehydrogenase(CAD)in the lignin synthesis pathway were significantly reduced in the culms under HD during the critical period for culm formation,and the relative expression levels of TaPAL,Ta4CL,TaCOMT,and TaCAD were significantly ***,the activities of lignin synthesis-related enzymes and their gene expression levels were significantly increased under HD-h compare

关键词： canopy light environment lignin lodging population distribution wheat

Chlorogenic acid supported strontium polyphenol networks ensemble microneedle patch to promote diabetic wound healing

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第8期35卷 491-497页

作者： Peizhe Li Qiaoling Liu Mengyu Pei Yuci Gan Yan gong Chuchen gong Pei wang Mingsong wang Xiansong wang Da-Peng Yang Bo Liang Guangyu Ji Research Institute of Plastic Surgery Weifang Medical UniversityWeifang 261000China The Second Affiliated Hospital of Fujian Medical University Quanzhou 362000China Department of Thoracic surgery Shanghai Key Laboratory of Tissue EngineeringShanghai Ninth People’s HospitalShanghai Jiao Tong University School of MedicineShanghai 200011China The Third Affiliated Hospital of Xinxiang Medical University Institutes of Health Central PlainClinical Medical Center of Tissue Engineering and RegenerationXinxiang Medical UniversityXinxiang 453003China School of Rehabilitation Science and Engineering University of Health and Rehabilitation SciencesQingdao 266024China

Delayed or non-healing of diabetic wounds is a significant complication,often attributed to high glucose-induced M1 macrophage accumulation,impaired angiogenesis,and reactive oxygen species(ROS)*** this,we introduced a strontium polyphenol network microneedle patch(SrC-MPNs@MN-PP)for percutaneous drug *** patch,formulated with polymer poly(γ-glutamic acid)(γ-PGA)and epsilon-poly-l-lysine(ε-PLL),incorporates strontium polyphenol networks(SrC-MPNs).The release of chlorogenic acid(CGA)from SrC-MPNs not only neutralizes ROS,but strontium ions also foster ***,SrC-MPNs@MN-PP can ameliorate the diabetic wound microenvironment and expedite healing.

关键词： Chlorogenic acid Strontium Microneedle patch Strontium polyphenol network Exudate absorption Diabetic wound healing

Generative adversarial networks based motion learning towards robotic calligraphy synthesis

在线全文

学校读者我要写书评

暂无评论

CAAI Transactions on Intelligence Technology 2024年第2期9卷 452-466页

作者： Xiaoming wang Yilong Yang Weiru wang Yuanhua Zhou Yongfeng Yin Zhiguo gong Department of Computer and Information Science University of MacaoMacaoChina School of Software Beihang UniversityBeijingChina Department of Computer Science and Technology Faculty of Information TechnologyBeijing University of TechnologyBeijingChina School of Foreign Languages Guangzhou Huashang CollegeGuangzhouChina

Robot calligraphy visually reflects the motion capability of robotic *** traditional researches mainly focus on image generation and the writing of simple calligraphic strokes or characters,this article presents a generative adversarial network(GAN)-based motion learning method for robotic calligraphy synthesis(Gan2CS)that can enhance the efficiency in writing complex calligraphy words and reproducing classic calligraphy *** key technologies in the proposed approach include:(1)adopting the GAN to learn the motion parameters from the robot writing operation;(2)converting the learnt motion data into the style font and realising the transition from static calligraphy images to dynamic writing demonstration;(3)reproducing high-precision calligraphy works by synthesising the writing motion data *** this study,the motion trajectories of sample calligraphy images are firstly extracted and converted into the robot *** robot performs the writing with motion planning,and the writing motion parameters of calligraphy strokes are learnt with *** the motion data of basic strokes is synthesised based on the hierarchical process of‘stroke-radicalpart-character’.And the robot re-writes the synthesised characters whose similarity with the original calligraphy characters is *** calligraphy characters have been tested in the experiments for method validation and the results validated that the robot can actualise the robotic calligraphy synthesis of writing motion data with GAN.

关键词： calligraphy synthesis generative adversarial networks Motion learning robot writing

Multipass Streaming Algorithms for Regularized Submodular Maximization

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tsinghua Science and Technology 2024年第1期29卷 76-85页

作者： Qinqin gong Suixiang Gao Fengmin wang Ruiqi Yang Beijing Institute for Scientific and Engineering Computing Beijing University of TechnologyBeijing 100124.China School of Mathematical Sciences University of Chinese Academy SciencesBeijing 100049China Beijing Jinghang Research Institute of Computing and Communication Beijing 100074China

In this work,we study a k-Cardinality Constrained Regularized Submodular Maximization(k-CCRSM)problem,in which the objective utility is expressed as the difference between a non-negative submodular and a modular *** multiplicative approximation algorithm exists for the regularized model,and most works have focused on designing weak approximation algorithms for this *** this study,we consider the k-CCRSM problem in a streaming fashion,wherein the elements are assumed to be visited individually and cannot be entirely stored in *** propose two multipass streaming algorithms with theoretical guarantees for the above problem,wherein submodular terms are monotonic and nonmonotonic.

关键词： submodular optimization regularized model streaming algorithms threshold

Large low-field reversible magnetocaloric effect in K_(3)Gd(PO_(4))_(2) at sub-Kelvin temperature

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1087-1092,I0003页

作者： Haojie wang Zhaojun Mo Jianjian gong Heng Tu Guochun Zhang Jun Shen School of Rare Earths University of Science and Technology of ChinaHefei230026China Ganjiang Innovation Academy Chinese Academy of SciencesGanzhou341119China Center for Crystal Research and Development Key Laboratory of Functional Crystals and Laser TechnologyKey Laboratory of CryogenicsTechnical Institute of Physics and ChemistryChinese Academy of SciencesBeijing100190China Department of Energy and PowerEngineering School of Mechanical EngineeringBeijing Institute of TechnologyBeijing100081China

We synthesized a potassium gadolinium phosphate K3Gd(PO_(4))_(2)with monoclinic structure(P2_(1/m))by the high-temperature solid-state reaction *** lattice constants obtained by Rietveld refinements of XRD curve are a=0.7411 nm,b=0.5624 nm,and c=0.9433 *** and magnetocaloric properties of K_(3)Gd(PO_(4))_(2)were investigated in *** magnetic phase transition temperature of K3Gd(PO_(4))2 was determined by ultra-low temperature testing to be 0.58 K.K_(3)Gd(PO_(4))2 exhibits large magnetic entropy changes(-ΔSM).The maximum-ΔSM are 20.2 and 29.4 J/(kg·K)in the magnetic field variation(ΔH)of 1 and 2 T,respectively,which are larger than that of the commercial Gd_(3)Ga_(5)O_(12)(GGG).The maximum adiabatic temperature change(ΔT_(ad))reaches 5.91 K under a magnetic field change(ΔH)of 1 T.K_(3)Gd(PO_(4))_(2)is a potential magnetic refrigeration material for obtaining sub-Kelvin temperatures.

关键词： Ultra-low temperature Magnetocaloric effect Magnetic entropy change Magnetic refrigeration Rare earths

Development of CONTHAC-3D and hydrogen distribution analysis of HPR1000

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第2期35卷 210-221页

作者： Hui wang Jing-Jing Li Yuan Chang gong-Lin Li Ming Ding China Nuclear Power Engineering Co.LTD. Beijing 100084China Fundamental Science on Nuclear Safety and Simulation Technology Laboratory Harbin 100049China

An in-house code,CONTHAC-3D,was developed to calculate and analyze thermal-hydraulic phenomena in containments during severe ***-3D is a three-dimensional computational fluid dynamics code that can be applied to predict gas flow,diffusion,and steam condensation in a containment during a severe hypothetical accident,as well as to obtain an estimate of the local hydrogen concentration in various zones of the ***-3D was developed using multiple models to simulate the features of the proprietary systems and equipment of HPR1000 and ACP100,such as the passive cooling system,passive autocatalytic recombiners and the passive air cooling *** validate CONTHAC-3D,a GX6 test was performed at the Battelle Model Containment *** hydrogen concentration and temperature monitored by the GX6 test are accurately predicted by ***,the hydrogen distribution in the HPR1000 containment during a severe accident was *** results show that the hydrogen removal rates calculated using CONTHAC-3D for different types of PARs agree well with the theoretical values,with an error of less than 1%.As the accident progresses,the hydrogen concentration in the lower compartment becomes higher than that in the large space,which implies that the lower compartment has a higher hydrogen risk than the dome and large space at a later stage of the *** amount of hydrogen removed by the PARs placed on the floor of the compartment is small;therefore,raising the installation height of these recombiners appropriately is ***,we do not recommend installing all autocatalytic recombiners at high *** study findings in regard to the hydrogen distribution in the HPR1000 containment indicate that CONTHAC-3D can be applied to the study of hydrogen risk containment.

关键词： Hydrogen risk mitigation Pressurized water reactor HPR1000 Thermal hydraulic CONTHAC-3D

Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 725-736页

作者： Hui wang Yidi Li Ming Zhang Wei gong Ruilin Lai Yunping Li State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Research Institute of Light Alloy Central South UniversityChangsha 410083China

Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five *** this work,the microstructural evolution and mechanical performance of the Al-Mg-Si alloy plate repaired by the preheating-assisted AFSD process were *** evaluate the tool rotation speed and substrate preheating for repair quality,the AFSD technique was used to additively repair 5 mm depth blind holes on 6061 aluminum alloy *** results showed that preheat-assisted AFSD repair significantly improved joint bonding and joint strength compared to the control non-preheat substrate ***,increasing rotation speed was also beneficial to improve the metallurgical bonding of the interface and avoid volume *** preheating conditions,the UTS and elongation were positively correlated with rotation *** the process parameters of preheated substrate and tool rotation speed of 1000 r/min,defect-free specimens could be obtained accompanied by tensile fracture occurring in the substrate rather than the repaired *** UTS and elongation reached the maximum values of 164.2MPa and 13.4%,which are equivalent to 99.4%and 140%of the heated substrate,respectively.

关键词： additive friction stir deposition structural repair tool rotation speed Al alloy

Treatment of multisystem inflammatory syndrome in children

在线全文

学校读者我要写书评

暂无评论

World Journal of Pediatrics 2024年第4期20卷 325-339页

作者： Tong Tong Yi-Hua Jin Min wang Fang-Qi gong Department of Cardiology Children's HospitalZhejiang University School of MedicineNational Clinical Research Center for Child HealthNo.3333 Binsheng RoadHangzhou 310052China

Background Multisystem inflammatory syndrome in children(MIS-C),a relatively uncommon but severe pediatric complication,is associated with coronavirus disease 2019(COVID-19).A variety of treatment approaches,including intravenous immunoglobulins(IVIGs),glucocorticoids(GCs)and biologic agents,such as anakinra and infliximab,have been described for the management of COVID-19-related *** therapy is also ***,a well-developed treatment system has not been established,and many issues remain *** recently published articles related to the treatment of MIS-C have been ***,in this review,we identified relevant articles published recently and summarized the treatment of MIS-C more comprehensively and *** sources We reviewed the literature on the treatment of MIS-C through 20 September *** PubMed/Medline,Web of Science,EMBASE,and Cochrane Library databases were searched with the combination of the terms"multisystem inflammatory syndrome","MIS-C","PIMS-TS","therapy","treatment","drug","IVIG","GCs","intravenous immunoglobulin","corticosteroids","biological agent",and"aspirin".Results The severity of MIS-C varies,and different treatment schemes should be used according to the specific *** research and data collection are vital to better understand the pathophysiology and optimal management of *** MIS-Cis a disease involving multiple systems and has great *** the accumulation of additional experience,we have garnered fresh insights into its treatment ***,there remains a critical need for greater standardization in treatment protocols,alongside the pressing necessity for more robust and meticulously conducted studies to deepen our understanding of these protocols.

关键词： Coronavirus disease 2019-Corticosteroids Intravenous immunoglobulin Multisystem inflammatory syndrome in children-Treatment