检索结果-南通市图书馆

Genes & Diseases 2024年第2期11卷 546-549页

作者： Fei Chen Yan Zhang Pai Peng Xiao-Ting Huang Zi-Han Qiu Bao-cheng Liu tie-Lin Yang Bo Yang Yan guo Key Laboratory of Biomedical Information Engineering of Ministry of Education Biomedical Informatics & Genomics CenterSchool of Life Science and TechnologyXi'an Jiaotong UniversityXi'anShaanxi 710049China Department of Orthopaedics Shannxi Provincial People's Hospital (The Third Affiliated Hospital of Xi'an Jiaotong University)Xi'anShaanxi 710068China

Osteoblasts are essential in the maintenance of human bone homeostasis.1 The abnormal formation and impaired differentiation ability of osteoblasts are pivotal factors leading to bone-related diseases,suggesting that an indepth study of osteoblasts can provide novel treatment strategies for these diseases.2 Human primary osteoblasts are precious experimental models in bone-related research.3 However,the isolation and culture of human primary osteoblasts still have some difficulties and limitations.Here,we refined a method to isolate and culture human primary osteoblasts by taking cancellous bone through a bone tissue sampler and pre-digesting it with pancreatin,which makes the process easier,cheaper,and more efficient.Furthermore,we compared the effects of the subtle changes in isolation and culture methods on the phenotype of human primary osteoblasts and examined the differences in morphology,proliferation,and differentiation between micro-explants cultured osteoblasts(MECOBs)and explants cultured osteoblasts(EC-OBs).

关键词： impaired culture details

Mesenchymal stem cell-derived exosomes as a new drug carrier for the treatment of spinal cord injury:A review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Traumatology 2024年第3期27卷 134-146页

作者： Lin-Fei cheng Chao-Qun You cheng Peng Jjia-ji Ren Kai guo tie-Long Liu Medical Collge.Anhui University of Science and Technology Huainan232000Anhui provinceChina Department of Orthopaedic Oncology Changzheng HospitalNavy Medical UniversityShanghai200003China Department of Orthopaedics The Central Hospital of Shanghai Putuo DistrictShanghai200333China

Spinal cord injury(SCI)is a devastating traumatic disease seriously impairing the quality of life in patients.Expectations to allow the hopeless central nervous system to repair itself after injury are unfeasible.Developing new approaches to regenerate the central nervous system is still the priority.Exosomes derived from mesenchymal stem cells(MSC-Exo)have been proven to robustly quench the inflammatory response or oxidative stress and curb neuronal apoptosis and autophagy following SCI,which are the key processes to rescue damaged spinal cord neurons and restore their functions.Nonetheless,MSC-Exo in SCI received scant attention.In this review,we reviewed our previous work and other studies to summarize the roles of MSC-Exo in SCI and its underlying mechanisms.Furthermore,we also focus on the application of exosomes as drug carrier in SCI.In particular,it combs the advantages of exosomes as a drug carrier for SCI,imaging advantages,drug types,loading methods,etc.,which provides the latest progress for exosomes in the treatment of SCI,especially drug carrier.

关键词： Spinal cord injury Mesenchymal stem cell Exosomes Mechanism Drug carrier

Effect of Al_(2)O_(3)/SiO_(2) mass ratio and CaO content on viscosity and structure of slag for pyrometallurgical processing of spent automotive catalysts

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第3期31卷 608-621页

作者： Zhe Wang Qi-long Wei cheng-bin Shi Zhan-cheng guo State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

The effect of Al_(2)O_(3)/SiO_(2) mass ratio and CaO content on the viscosity and structure of the CaO-Al_(2)O_(3)-SiO_(2)-6MgO-1.5ZrO_(2)-1.5CeO_(2) slag was investigated.The results show that with the increase in Al_(2)O_(3)/SiO_(2) mass ratio,the viscous flow units within the slag gradually change from Si-O-Si to Al-O-Al and Al-O-Si.Furthermore,the substitution of Al_(2)O_(3) for SiO_(2) leads to the transformation of Si-O bonds towards weaker Al-O bonds,which weaken the bond strength of the aluminosilicate networks,thus leading to a decrease in the viscosity of slag.The increase in CaO content effectively promotes the depolymerization of the aluminosilicate networks,resulting in a significant decrease in the viscosity of the slag.The slag with Al_(2)O_(3)/SiO_(2) of 0.7-1.5 and CaO of 30 wt.%shows promise as the reference slag system for the Fe-collection smelting of spent automotive catalysts due to its good comprehensive performance.

关键词： Aluminosilicate slag Al_(2)O_(3)/SiO_(2)mass ratio CaO content Viscosity Slag structure

Adaptive Sparse Grid Discontinuous Galerkin Method:Review and Software Implementation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Communications on Applied Mathematics and Computation 2024年第1期6卷 501-532页

作者： Juntao Huang Wei guo Yingda cheng Department of Mathematics and Statistics Texas Tech UniversityLubbockTX79409USA Department of Computational Mathematics Science and EngineeringMichigan State UniversityEast LansingMI48824USA Department of Mathematics Michigan State UniversityEast LansingMI48824USA

This paper reviews the adaptive sparse grid discontinuous Galerkin(aSG-DG)method for computing high dimensional partial differential equations(PDEs)and its software implementation.The C++software package called AdaM-DG,implementing the aSG-DG method,is available on GitHub at https://***/JuntaoHuang/adaptive-multiresolution-DG.The package is capable of treating a large class of high dimensional linear and nonlinear PDEs.We review the essential components of the algorithm and the functionality of the software,including the multiwavelets used,assembling of bilinear operators,fast matrix-vector product for data with hierarchical structures.We further demonstrate the performance of the package by reporting the numerical error and the CPU cost for several benchmark tests,including linear transport equations,wave equations,and Hamilton-Jacobi(HJ)equations.

关键词： Adaptive sparse grid Discontinuous Galerkin High dimensional partial differential equation Software development

Cosmological interpretation for the stochastic signal in pulsar timing arrays

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第4期67卷 43-50页

作者： Yu-Mei Wu Zu-cheng Chen Qing-guo Huang School of Fundamental Physics and Mathematical Sciences Hangzhou Institute for Advanced StudyUniversity of Chinese Academy of SciencesHangzhou 310024China School of Physical Sciences University of Chinese Academy of SciencesBeijing 100049China Department of Astronomy Beijing Normal UniversityBeijing 100875China Advanced Institute of Natural Sciences Beijing Normal UniversityZhuhai 519087China Department of Physics and Synergistic Innovation Center for Quantum Effects and Applications Hunan Normal UniversityChangsha 410081China CAS Key Laboratory of Theoretical Physics Institute of Theoretical PhysicsChinese Academy of SciencesBeijing 100190China

The pulsar timing array(PTA)collaborations have recently reported compelling evidence for a stochastic signal consistent with a gravitational-wave background.In this paper,we combine the latest data sets from NANOGrav,PPTA,and EPTA to explore cosmological interpretations for the PTA signal from first-order phase transitions,domain walls,and cosmic strings,respectively.We find that the domain wall model is strongly disfavored with the Bayes factors compared with the first-order phase transitions and cosmic strings being 1/90 and 1/189,respectively,breaking the degeneracy among these models in individual data set.We also find that:(1)a strong phase transition at temperatures below the electroweak scale is favored,and the bubble collisions make the dominant contribution to the energy density spectrum;(2)a small reconnection probability p<1.55×10^(-1)allowed by strings in(super)string theory is favored at the 95%confidence level,and ground-based detectors can further constrain the parameter space.

关键词： puslar timing arrays gravitational-wave background first-order phase transitions domain walls cosmic strings

Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第3期31卷 688-699页

作者： Wen-quan Sun Sheng-yi Yong tie-heng Yuan Ting-song Yang An-rui He Chao Liu Rui-chun guo National Engineering Research Center for Advanced Rolling and Intelligent Manufacturing University of Science and Technology BeijingBeijing 100083China

The slow phase transformation of microalloyed dual phase steel makes the nonuniform stress and temperature fields during the post rolling cooling process have a significant impact on the phase transformation process.Given the relatively slow phase transformation of DP780 steel within the microalloyed dual phase steel series,the influence of stress on the phase transformation behavior of DP780 steel was investigated.To quantify the nonuniform thermal and stress conditions in the steel coil,a thermo-mechanical coupled finite element model of the hot-rolled strip cooling process was established.Based on the simulation data,DP780 steel was chosen as the research material,and Gleeble 3500 thermal simulation equipment was used for experimental validation.The thermal expansion curves were analyzed through regression to establish the dynamic model of DP780 steel phase transformation under stress.Subsequently,metallographic analysis was conducted to determine phase transformation type and grain size of DP780 steel.The results confirmed that the stress promotes the occurrence of semi-diffusion-type bainite transformation.Furthermore,an appropriate level of stress facilitates the growth of bainitic grains,while the increased stress inhibits the growth of ferritic grains.

关键词： Microalloyed dual phase steel Stress Bainitic transformation Grain Finite element method

{1012}twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1529-1539页

作者： Bin-Jiang Lv Sen Wang Fu-Hao Gao Ning Cui Yi-Nan Li tie-Wei Xu Feng guo School of Mechanical and Automotive Engineering Qingdao University of Technology266520China Key Lab of industrial Fluid Energy Conservation and Pollution Control Qingdao University of Technology266520China

This study investigated the formation mechanism of new grains due to twin–twin intersections in a coarse-grained Mg–6Al–3Sn–2Zn alloy during different strain rates of an isothermal compression.The results of electron backscattered diffraction investigations showed that the activated twins were primarily{1012}tension twins,and 60°boundaries formed due to twin–twin intersections under different strain rates.Isolated twin variants with 60°boundaries transformed into new grains through lattice rotations at a low strain rate(0.01 s^(−1)).At a high strain rate(10 s^(−1)),the regions surrounded by subgrain boundaries through high-density dislocation arrangement and the 60°boundaries transformed into new grains via dynamic recrystallization.

关键词： Mg alloy Twin-twin intersection Lattice rotation Dynamic recrystallization

Multi-objective optimization and evaluation of supercritical CO_(2) Brayton cycle for nuclear power generation

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第2期35卷 183-209页

作者： guo-Peng Yu Yong-Feng cheng Na Zhang Ping-Jian Ming Sino-French Institute of Nuclear Engineering and Technology Sun Yat-Sen UniversityZhuhai 519082China School of Civil Engineering and Architecture East China Jiaotong UniversityNanchang 330013China

The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.

关键词： Supercritical CO_(2)Brayton cycle Nuclear power generation Thermo-economic analysis Multi-objective optimization Decision-making methods

Mechanism and control of nonuniform phase transformation of microalloyed dual-phase steel during cooling process after hot rolling

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第2期31卷 428-441页

作者： Wen-quan Sun Sheng-yi Yong tie-heng Yuan Chao Liu San-bao Zhou Rui-chun guo Meng-xia Tang National Engineering Research Center for Advanced Rolling and Intelligent Manufacturing University of Science and Technology BeijingBeijing100083China Strip Production Plant Xichang Steel and Vanadium Corporation of Pangang GroupXichang615000SichuanChina

After cooling in the hot rolling process,the metallographic structure of microalloyed dual-phase steel is nonuniform along the rolling direction,while the thickness fluctuation of microalloyed dual-phase steel with a nonuniform metallographic structure will occur during cold rolling.The mechanism of nonuniform phase transformation of microalloyed dual-phase steels was studied during the cooling process after hot rolling,and the nonuniform phase transformation of microalloyed dual-phase steel was regulated during the cooling process after hot rolling through process optimization.First,the empirical equation of phase transformation temperature was measured by a dilatometer considering thermal expansion.Then,the phase field and temperature field of laminar cooling process were calculated to provide initial boundary conditions for the finite element model.After that,the coupling finite element model of the temperature phase transformation of the strip steel in coiling transportation process was established.The simulation results show that the different thermal contact conditions of the microalloyed dual-phase steel during coil transportation lead to uneven cooling of the coil,which leads to nonuniform transformation of the coil along the rolling direction.In addition,by prolonging the time interval from coiling to unloading,the phenomenon of nonuniform phase transformation of microalloyed dual-phase steel can be effectively controlled.The simulation results are applied to industrial production.The application results show that prolonging the time interval from coiling to unloading can effectively improve the nonuniform phase transformation of microalloyed dual-phase steel in the cooling process after hot rolling.

关键词： Microalloyed dual-phase steel Thickness fluctuation Cooling Heat conduction Nonuniform phase transition Finite element method

Portal vein embolization combined with ex vivo liver resection and autotransplantation: A novel treatment strategy for end-stage and metastatic hepatic alveolar echinococcosis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第2期23卷 210-216页

作者： Qiang guo Mao-Lin Wang Kai Zhong Jia-Long Li tie-Min Jiang Hao Wen Tuerganaili Aji Ying-Mei Shao Department of Hepatobiliary and Echinococcosis Surgery Digestive and Vascular Surgery CenterFirst Affiliated Hospital of Xinjiang Medical UniversityUrumqi 830054China Clinical Medical Research Center of Echinococcosis and Hepatobiliary Disease of Xinjiang Uygur Autonomous Region Urumqi 830054China State Key Laboratory of Pathogenesis Prevention and Treatment of High Incidence Diseases in Central AsiaXinjiang Medical UniversityUrumqi 830054China

Alveolar echinococcosis(AE)is a lethal parasitic disease caused by Echinococcus multilocularis larvae,and more than 90%of pri-mary AE lesions occur in the liver.Most of the affected individ-uals remain asymptomatic and the disease is often diagnosed at an advanced stage.The infection may spread to organs adjacent to the liver or distant locations,eventually causing end-stage multi-ple organ AE.Brain metastasis of AE is the most fatal with an inci-dence rate of 0.2%[1].

关键词： organs echinococcosis metastasis