检索结果-南通市图书馆

A Comparative Study of the Electrodes Gels’Electrical Properties in the Measurement Issues of Intrabody Communication

在线全文

学校读者我要写书评

暂无评论

Journal of Beijing Institute of Technology 2022年第1期31卷 71-80页

作者： Fengjie Lin Ziliang Wei Jiejie Yang Yangrong Wen Yueming Gao sio hang pun Mang I Vai Min Du College of Physics and Information Engineering Key Laboratory of Medical Instrumentation&Pharmaceutical Technology of Fujian ProvinceFuzhou UniversityFuzhou 350108China State Key Laboratory of Analog and Mixed-Signal VLSI University of MacaoTaipaMO 999078China

Intrabody communication(IBC)technology is becoming progressively more standard-ized due to its low power consumption and high security features incorporated into the third phys-ical layer of the IEEE 802.15.6 *** then,there are still many challenges in normalizing the measurement issues of IBC.A major concern that should not be overlooked is the electrodes in the IBC,especially the popular use of gel *** the channel measurements,gel electrodes are commonly employed to improve the signal-to-noise ratio and prevent electrodes from falling *** this paper,a comparative study of the electrical properties of gel was investigated during the measurement of human channel characteristics and to clarify the differences of ***,the basis of electrostatic field pole plate measurements and electromagnetic theory were introduced to interpretate how the relative permittivity and conductivity of different gels will influence the meas-urement *** the in vivo experiments with different gel or dry electrodes were performed to compare the differences induced by the *** results indicate that the influence of the gel on the human channel measurement is mainly concentrated below 400 kHz(the attenuation is re-duced by 16.7 dB on average),and the stability of the permittivity and conductivity of the gel has a direct impact on the stability of its measurement of the human *** result may provide a meaningful reference for the standardization of electrode usage in IBC.

关键词： intrabody communication channel characteristic measurement gel electrodes permit-tivity conductivity

Electro Optic Methods in Intra-body Communication System

在线全文

学校读者我要写书评

暂无评论

Electro Optic Methods in Intra-body Communication System

WavEnhancer: Unifying Wavelet and Transformer for Image Enhancement

第二届国际计算科学与工程国际学术研讨会

作者： Jian Li Shuang Zhang Peng Un Mak sio hang pun Mang I Vai Engineering and Technical College of Chengdu University of Technology College of computer science Neijiang Normal University Biomedicine Department of Electrical and Electronics Engineering Faculty of Science and Technology University of Macau

This paper briefly presents the history of development of the TRIZ namely the Theory of the Solution of Inventive Problems, introduces the current situation of the theoretical research and the application of the TRIZ, and propounds the emphasis and direction of the research and application of the TRIZ in China, which will contribute to the enhance the efficiency and benefits in ComputerAided Manufacturing.

关键词： TRIZ Inventive Problems CAM Artificial Intelligence Expert System

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Journal of Computer Science & Technology 2024年第2期39卷 336-345页

作者：李梓诺陈绪行郭淑娜王书强潘治文 Department of Computer and Information Science University of MacaoMacao 999078China Research Center for Biomedical Information Technology Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Image enhancement is a widely used technique in digital image processing that aims to improve image aesthetics and visual quality. However, traditional methods of enhancement based on pixel-level or global-level modifications have limited effectiveness. Recently, as learning-based techniques gain popularity, various studies are now focusing on utilizing networks for image enhancement. However, these techniques often fail to optimize image frequency domains. This study addresses this gap by introducing a transformer-based model for improving images in the wavelet domain. The proposed model refines various frequency bands of an image and prioritizes local details and high-level features. Consequently, the proposed technique produces superior enhancement results. The proposed model’s performance was assessed through comprehensive benchmark evaluations, and the results suggest it outperforms the state-of-the-art techniques.

关键词： transformer wavelet transform image enhancement

Effect of Cr_(2)O_(3) on properties of CaO-sio_(2)-Fe_(t)O-MgO system and dissolution behavior of lime

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 870-881页

作者： Shan-nan Li Jian-li Li Yue Yu hang-yu Zhu The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The productivity of the chrome-containing semi-steel converter smelting process is directly affected by the slag-forming speed during the converter preliminary *** effects of Cr_(2)O_(3) content on the physicochemical properties of the CaO-sio_(2)-Fe_(t)O-MgO system,such as melting temperature,solidification behavior,mineral composition,and lime dissolution rate,were *** results showed that the slag was an amorphous phase at 1500℃.When Cr_(2)O_(3) was added,Ca(Fe,Mg)Si_(2)O_(6) and spinel were formed in the *** the increase in Cr_(2)O_(3) content,the amount of spinel precipitation increased,and the dendritic FegO_(4) crystal gradually changed into the granular(Fe,Mg)(Fe,Cr)2O_(4) *** the Cr_(2)O_(3) content increased from O to 2.91 wt.%,the melting temperature of the slag rose,and the melting range of the slag expanded slightly,but the lime dissolution rate did not *** the Cr_(2)O_(3) content further increased to 9.09 wt.%,the melting temperature continued to rise,the melting range rapidly expanded,and the lime dissolution rate decreased.

关键词： Cr_(2)O_(3) Vanadium-titanium magnetite Converter Slag Lime dissolution

Evolution of MnO–sio2–Al_(2)O_(3)–MgO inclusions during heat treatment at 1100℃

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1221-1231页

作者： Xu-bo Lei Jian-li Li Qiang Zeng hang-yu Zhu Yue Yu The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan430081HubeiChina

To investigate the evolutionary behavior of the MnO–sio_(2)–Al_(2)O_(3)–MgO inclusions during heat treatment,water quenched samples were isothermally held at 1100°C for 120 min in Ar and air atmosphere,and the obtaining samples were analyzed by X-ray diffraction,scanning electron microscopy and energy dispersive *** showed that 3MnO·Al_(2)O_(3)·3sio_(2)and MnO·sio_(2)were detected in the 5 wt.%MgO system after isothermal holding in Ar atmosphere,while MgO·Al_(2)O_(3),MnO·sio_(2)and Mn7O8·sio4 were detected in air *** evolutionary behavior of the 10,15 and 20 wt.%MgO systems after isothermal holding in different atmosphere were *** affected the solid phase transformation of the low MgO content *** calculation results of FactSage 8.1 showed that MgO·Al_(2)O_(3)was formed in the 5 wt.%MgO system with air *** solid phase transformation was accompanied by grain coarsening during the isothermal holding *** differences in the solid phase transformation in different atmosphere of the 5 wt.%MgO system indicated that it was a gas-phase transport grain coarsening *** enrichment of Al element in the liquid phase region at the grain edges,the homogeneous distribution of Mg element and the disappearance of the liquid phase within the crystal revealed that other MgO content systems were liquid–solid transport grain coarsening mechanism.

关键词： Evolution Glassy phase Inclusion Heat treatment MgO·Al_(2)O_(3)

Preparation, Crystallization and Mechanical Properties of Potassium Aluminosilicate Glass-ceramics

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第3期39卷 587-595页

作者：郑伟宏黄猛 GAO Zipeng Zhang hang YUAN Jian TIAN Peijing PENG Zhigang State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan 430070China Shahe Research Institute of Glass Technology Shahe 054100China

In this study,transparent K_(2)O-Al_(2)O_(3)-sio_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat *** effects of sio_(2)/Al_(2)O_(3) ratio and heat treatment on crystallization and mechanical properties were *** crystallization kinetics and X-Ray Diffraction(XRD)results showed that sio_(2)/Al_(2)O_(3) ratio and heat treatment system had a direct impact on the crystallization behavior of potassium aluminosilicate *** heat-treated at 680℃/2 h and 780℃/1 h,cracks generated on the surface of the sample with the addition of sio_(2)/Al_(2)O_(3)=4.8(in mol)due to the huge difference in the coefficient of thermal expansion between glass matrix and *** the addition of sio_(2)/Al_(2)O_(3)(in mol)was 4,the sample with leucite as the main crystalline phase showed an excellent fracture toughness(1.46 MPa·m^(0.5))after the heat treatment of 680℃/2 h and 780℃/5 *** there was a phase transformation from kaliophilite to *** crystalline phases of the sample heat-treated at 680℃/8 h and 780℃/1 h were leucite and kaliophilite,which resulted in the visible light transmittance of 63%and the fracture toughness of 0.91 MPa·m^(0.5).Furthermore,after the heat treatment of 680℃/2 h and 780℃/5 h,the main crystalline phase of the sample with sio_(2)/Al_(2)O_(3)=3.2(in mol)was still *** leucite only grows on the surface of the sample and is hard to grow inward,it is hard to achieve the bulk crystallization of leucite in the sample with sio_(2)/Al_(2)O_(3)=3.2(in mol).

关键词： leucite glass-ceramic kaliophilite crystallization kinetics

Highly crystalline Y3Al5O12:Ce3+ phosphor-in-silica glass ceramics for high-power solid-state lighting

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第11期42卷 2051-2057页

作者： Shisheng Lin hang Lin Hongyi Yang Pengfei Wang Ping Sui Ju Xu Yao Cheng Yuansheng Wang Key Laboratory of Optoelectronic Materials Chemistry and Physics Fujian Institute of Research on the Structure of MatterChinese Academy of Sciences Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China Xiamen Institute of Rare-earth Materials Haixi InstitutesChinese Academy of Sciences College of Chemistry and Materials Science Fujian Normal University

The pursuit of high-brightness solid-state lighting（SSL） stimulates the development of all-inorganic color converters with high *** is required that the fluorescent material is able to cope with the extreme condition generated from the irradiation of high-power-density excitation *** such,in this work,we developed a new composite color converter,i,e.,Y3Al5O12:Ce3+phosphor-in-silica glass ceramic(YAG:Ce3+PiSGC).Remarkably,the amorphous sio2matrix spontaneously transforms into tetragonal sio2crystallites during co-sintering with crystallization fraction reaching up to>90%（almost full ceramization）.The activation energy for crystallization Ecand Avrami index n of amorphous silica oxide are 298.5 kJ/mol and 1.71,indicating the diffusion-controlled glass crystallization *** fabricated prototype high-power phosphor-converted white light-emitting diode（pc-wLED） and phosphor-converted white laser diode（pc-wLD） based on YAG:Ce3+PiSGC show satisfactory photometric/colorimetric *** developed color co nverters have combined merits of environmental protection property,cost-effective manufacturing,good luminescent performance,and easy *** study highlights a new kind of opto-functional composite material and its application as an efficient color converter in high-power solid-state lightings.

关键词： Glass ceramics Laser-driven white light Rare earths White light-emitting diode Y3Al5O12:Ce3+

Preparation and characteristic study of Schottky diodes based on Ga_(2)O_(3)thin films

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

The Journal of China Universities of Posts and Telecommunications 2024年第2期31卷 28-37页

作者： Zhang Xuhui Chen Haifeng Liu Xiangtai Lu Qin Wang Zhan Cheng hang Che Lujie Guan Youyou Han Xiaocong School of Electronic Engineering Xi'an University of Posts and TelecommunicationsXi'an 710121China

This study uses atomic layer deposition(ALD)to grow Ga_(2)O_(3)films on sio_(2)substrates and investigates the influence of film thickness and annealing temperature on film *** diode devices are fabricated based on the grown Ga_(2)O_(3)films,and the effects of annealing temperature,electrode size,and electrode spacing on the electrical characteristics of the devices are *** results show that as the film thickness increases,the breakdown voltage of the fabricated devices also increases.A Schottky diode with a thickness of 240 nm can achieve a reverse breakdown voltage of 300 *** film quality significantly improves as the annealing temperature of the film *** a voltage of 5 V,the current of the film annealed at 900℃is 64 times that of the film annealed at 700℃.The optimum annealing temperature for Ohmic contact electrodes is 450℃.At 550℃,the Ohmic contact metal tends to burn,and the performance of the device is *** the electrode spacing increases the forward current of the device but decreases the reverse breakdown *** the Schottky contact electrode size increases the forward current,but the change is not significant,and there is no significant change in the reverse breakdown *** device also performs well at high temperatures,with a reverse breakdown voltage of 220 V at 125℃.

关键词： atomic layer deposition(ALD) Ga_(2)O_(3)film Schottky diode annealing temperature

Performance study of vertical MSM solar-blind photodetectorsbased onβ-Ga_(2)O_(3)thin film

在线全文

学校读者我要写书评

暂无评论

The Journal of China Universities of Posts and Telecommunications 2024年第2期31卷 17-27页

作者： Chen Haifeng Che Lujie Lu Qin Wang Shaoqing Liu Xiangtai Liu Zhanhang Guan Youyou Zhao Xu Cheng hang Han Xiaocong Zhang Xuhui School of Electronic Engineering Xi'an University of Posts and TelecommunicationsXi'an 710121China

In this work,β-Ga_(2)O_(3)thin films were grown on sio_(2)substrate by atomic layer deposition(ALD)and annealed in N_(2)atmosphere to enhance the crystallization quality of the thin films,which were verified from X-rays diffraction(XRD).Based on the grownβ-Ga_(2)O_(3)thin films,vertical metal-semiconductor-metal(MSM)interdigital photodetectors(PDs)were fabricated and *** PDs have an ultralow dark current of 1.92 pA,ultra-high photo-to-dark current ratio(PDCR)of 1.7×10^(6),and ultra-high detectivity of 4.25×10^(14)Jones at a bias voltage of 10 V under 254 nm deep ultraviolet(DUV).Compared with the horizontal MSM PDs under the same process,the PDCR and detectivity of the fabricated vertical PDs are increased by 1000 times and 100 times,*** addition,the vertical PDs possess a high responsivity of 34.24 A/W and an external quantum efficiency of 1.67×10^(4)%,and also exhibit robustness and repeatability,which indicate excellent *** the effects of electrode size and external irradiation conditions on the performance of the vertical PDs continued to be investigated.

关键词： Ga_(2)O_(3) atomic layer deposition(ALD) annealing vertical metal-semiconductor-metal(MSM)interdigital photodetectors