检索结果-南通市图书馆

Physical,Thermal and Partial Discharge Evaluation of Nano Alumina Filled Silicone Rubber in an Inclined Plane Test

CSEE Journal of Power and Energy Systems 2022年第4期8卷 1242-1249页

作者： M.Tariq Nazir Faizan Tahir Butt Haider Hussain B.Toan Phung shakeel Akram M.Shoaib Bhutta Ghulam Yasin School of Engineering RMIT UniversityMelbourneVIC 3000Australiaand the School of Mechanical and Manufacturing EngineeringUniversity of New South Wales SydneyNSW 2052Australia School of Electrical Engineering and Telecommunications University of New South Wales SydneyNSW 2052Australia Institut d'Electronique et des Systès(IES) UMR 5214CNRSUniversitéde Montpellier34095 MontpellierFrance State Key Laboratory of Power Transmission Equipment and System Security and New Technology Chongqing UniversityChonging 400044China State Key Laboratory of Chemical Resource Engineering College of EnergyBeijing University of Chemical TechnologyBeijing 100029China

Silicone rubber(SiR)composite material is a modern-day insulator for high voltage outdoor applications.The imperfection attributed to SiR is its weak resistance to tracking and erosion when exposed to an outdoor polluted environment which reduces its operational lifetime.This paper investigates the performance of SiR with the addition of 0,1,2.5,5,10 and 20%by weight contents of nano alumina(Al_(2)O_(3)).Inclined plane tests are performed according to IEC 60587 using the step up tracking voltage method with an initial voltage of 3.0 kV and the contaminant solution flow rate is maintained at 0.3 ml/min using a peristaltic pump.The applied voltage level is increased at a rate of 0.25 kV/h.Results suggest that physical tracking,erosion,RMS leakage current and surface partial discharge(PD)performance of samples is improved with the addition of nano alumina.The tracking length,eroded mass,RMS leakage current and average PD magnitude are measured 22%,79%,30%and 52%lesser in 20 wt%relative to 0 wt%,respectively.A thermal distribution analysis is undertaken with infrared camera and it is discovered that heat is accumulated in the discharge area of the liquid flow.The maximum temperature on the insulating specimen is decreased with increasing nanofiller contents.The above promising findings can be due to better thermal stability with low chain mobility at the interaction zone of SiR and alumina.Moreover,less liquid evaporation due to better thermal conduction and improved physical bonding between SiR and nano alumina are possible reasons behind the excellent performance of nanocomposites.

关键词： Alumina(Al_(2)O_(3)) dry band arcing(DBA) inclined plane test(IPT) infrared thermal analysis leakage current partial discharge(PD) silicone rubber(SiR) thermal properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Pulse width modulation voltage source deadtime effect on partial discharge and lifetime of inverter‐fed motor insulation

引用

High Voltage 2022年第6期7卷 1185-1193页

作者： shakeel Akram Peng Wang Pengfei Meng Gian Carlo Montanari Farhan Hameed Malik College of Electrical Engineering Sichuan UniversityChengduChina Center for Advanced Power Systems Florida State UniversityTallahasseeFloridaUSA Department of Electromechanical Engineering Abu Dhabi PolytechnicAbu DhabiUnited Arab Emirates

This paper analyses the impact of square wave pulse voltage deadtime on the partial discharge(PD)and the lifetime of turn-to-turn insulation.A bipolar repetitive pulse voltage with a deadtime of 0–10μs is produced using double half-bridge solid-state switches having push–pull technology controlled by a field-programmable gate array.The mechanism of the discharge process at rising and falling edges of the pulse voltage before and after deadtime is analysed in detail.The discharge amplitude and PD probability at the rising/falling edges of the voltage waveform increase as the deadtime increases from 0 to 10μs due to the remanent charges.The number of PD and their intensity is higher at the first rising/falling edges of pulse voltage as compared to the second rising/falling edges for all deadtimes 0–10μs.As the deadtime increases beyond 2μs,the number of PDs increases and concentrates at a specific phase angle of rising/falling edges.These localise discharges degrade the insulation material and reduce its lifetime.This study helps to identify the inverter-fed motor insulation faults due to deadtime.It can provide guidelines to motor insulation designers to determine the limit value of deadtime to compensate PD and ensure the safer operation of such motors.

关键词： dead insulation inverter

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Unified Computational Modelling for Healthcare Device Security Assessment

引用

Computer Systems Science & Engineering 2021年第4期37卷 1-18页

作者： shakeel Ahmed Abdulaziz Alhumam Department of Computer Science College of Computer Sciences and Information Technology King Faisal UniversityAl-Ahsa31982Kingdom of Saudi Arabia

This article evaluates the security techniques that are used to maintainthe healthcare devices, and proposes a mathematical model to list these in theorder of priority and preference. To accomplish the stated objective, the articleuses the Fuzzy Analytic Network Process (ANP) integrated with Technical forOrder Preference by Similarities to Ideal Solution (TOPSIS) to find the suitablealternatives of the security techniques for securing the healthcare devices fromtrespassing. The methodology is enlisted to rank the alternatives/ techniquesbased on their weights’ satisfaction degree. Thereafter, the ranks of the alternatives determine the order of priority for the techniques used in healthcare security.The findings of our analysis cite that Machine Learning (ML) based healthcaredevices obtained the highest priority among all the other security techniques.Hence the developers, manufacturers and researchers should focus on the MLtechniques for securing the healthcare devices. The results drawn through theaid of the suggested mathematical model would be a corroborative referencefor the developers and the manufacturers in assessing the security techniques ofthe healthcare devices.

关键词： Medical devices fuzzy-ANP.TOPSIS security techniques machine learning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Electrical Tracking,Erosion and Fire Retardancy Performance of Silicone Rubber Insulation Containing Aluminum Trihydrate,Graphene and Glass Fiber Additives

引用

CSEE Journal of Power and Energy Systems 2023年第5期9卷 1918-1925页

作者： M.Tariq Nazir Arslan Khalid B.Toan Phung Arup K.Das Peter Cheetham Ashish Paramane shakeel Akram Khoi Loon Wong School of Engineering RMIT UniversityMelbourneVIC 3000Australia. the Center for Advanced Power Systems(CAPS) Florida State UniversityFL 32310USA the Flame Security International Pty Limited Australia the School of Electrical Engineering and Telecommunications University of New South Wales SydneyNSW 2052Australia Department of Electrical Engineering National Institute of TechnologySilcharAssam 788010India the College of Electrical Engineering and Control Science Nanjing Tech UniversityNanjingJiangsu 211816China

Silicone rubber composite is a priority electrical insulating material used in high-voltage outdoor insulation applications.Low electrical tracking/erosion and poor flame resistance performance of silicone rubber once ignited,substantially reduce its working life.This paper attempts to investigate tracking/erosion performance of room temperature vulcanized(RTV)silicone rubber along with flame retardant parameters using aluminum trihydrate(ATH),graphene nanosheets(GN)and milled glass fiber(GF)additives.The inclined plane test(IPT)was performed in line with criteria defined in IEC 60587 using step-up tracking voltage method while flame retardancy is evaluated according to ASTM E 1354.0 using a cone calorimeter.Results suggest 30% of ATH assists in improving physical tracking/erosion resistance of pristine silicone elastomer rubber by impeding development of leakage current and a great reduction in maximum average temperatures on the surface of RTV2.Further improvement in performance of RTV2 is achieved through introduction of 1%of GN and 5% of GF as seen in RTV4.Moreover,30% of ATH reduces heat release rate and smoke production rate,and this trend is improved with the introduction of GN/GF.RTV4 has pop up as the most promising silicone rubber composite with excellent electrical tracking,erosion,and flame resistance performance relative to its counterparts in this study.

关键词： Dry band arcing electrical tracking heat release rate leakage current silicone rubber smoke production rate

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Measurement and correlation of solubility of diosmin in four pure solvents and β-cyclodextrin solution at 298.15K to 333.15K

引用

Chinese Journal of Chemical Engineering 2015年第5期23卷 812-815页

作者： Md Khalid Anwer Faiyaz shakeel Department of Pharmaceutics College of Pharmacy Salman Bin Abdulaziz University Center of Excellence in Biotechnology Research King Saud University Department of Pharmaceutics College of Pharmacy King Saud University

The aim of present study was to measure and correlate the solubility of poorly water-soluble flavonoid diosmin in water, ethanol, isopropyl alcohol(IPA), polyethylene glycol-400(PEG-400) and β-cyclodextrin(β-CD) aqueous solution(0.02 mol·L-1). The solubility of diosmin was measured using the shake flask method from(298.15 to333.15) K at atmospheric pressure. The experimental solubilities of diosmin were regressed by the modified Apelblat model with a relative deviation in the range of 0.048% to 5.940%. The correlation coefficients were observed in the range of 0.9957 to 0.9995. The solubility of diosmin was found to be increased with temperature in all sample matrices investigated. The mole fraction solubility of diosmin was found to be higher in β-CD aqueous solution and PEG-400 as compared to water, ethanol and IPA. Based on solubility data of present study, diosmin was considered as practically insoluble in water, insoluble in ethanol & IPA and soluble in PEG-400 and β-CD aqueous solution.

关键词：溶解度数据水溶液环糊精测量 PEG-400 聚乙二醇-400 溶剂摩尔分数

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Genetic variability predicting breeding potential of upland cotton(Gossypium hirsutum L.)for high temperature tolerance

引用

Journal of Cotton Research 2023年第2期6卷 81-97页

作者： FAROOQ Amjad shakeel Amir SAEED Asif FAROOQ Jehanzeb RIZWAN Muhammad CHATTHA Waqas Shafqat SARWAR Ghulam RAMZAN Yasir Cotton Research Station Ayub Agricultural Research InstituteFaisalabad 38000Pakistan Department of Plant Breeding and Genetics University of AgricultureFaisalabad 38040Pakistan

Background High temperature stress at peak flowering stage of cotton is a major hindrance for crop potential.This study aimed to increase genetic divergence regarding heat tolerance in newly developed cultivars and hybrids.Fifty cotton genotypes and 40 F1(hybrids)were tested under field conditions following the treatments,viz.,high temperature stress and control at peak flowering stage in August and October under April and June sowing,respectively.Results The mean squares revealed significant differences among genotypes,treatments,genotype×treatment for relative cell injury,chlorophyll contents,canopy temperature,boll retention and seed cotton yield per plant.The genetic diversity among 50 genotypes was analyzed through cluster analysis and heat susceptibility index(HSI).The heat tolerant genotypes including FH-Noor,NIAB-545,FH-466,FH-Lalazar,FH-458,NIAB-878,IR-NIBGE-8,Weal-AGShahkar,and heat sensitive,i.e.,CIM-602,Silky-3,FH-326,SLH-12 and FH-442 were hybridized in line×tester fashion to produce F1 populations.The breeding materials’populations(40 F1)revealed higher specific combining ability variances along with dominance variances,decided the non-additive type gene action for all the traits.The best general combining ability effects for most of the traits were displayed by the lines,i.e.,FH-Lalazar,NIAB-878 along with testers FH-326 and Silky-3.Specific combining ability effects and better-parent heterosis were showed by the crosses,viz.,FH-Lalazar×Silky-3,FH-Lalazar×FH-326,NIAB-878×Silky-3,and NIAB-878×FH-326 for seed cotton yield and yield contributing traits under high temperature stress.Conclusion Heterosis breeding should be carried out in the presence of non-additive type gene action for all the studied traits.The best combiner parents with better-parent heterosis may be used in crossing program to develop high yielding cultivars,and hybrids for high temperature stress tolerance.

关键词： High temperature Upland cotton Peak flowering Heterosis Gene action Combining ability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study of pure and semileptonic decays of D_s meson within R-parity violating supersymmetric model

引用

Chinese Physics C 2014年第12期38卷 1-10页

作者： Farida Tahir Azeem Mir shakeel Mahmood COMSATS Institutte of Information Technology Physics Department Islamabad Pakistan COMSATS Institutte of Information Technology Physics Department Lahore Pakistan

We present the comaprative study of semileptonic and leptonic decays of Ds, D±and D0meson（D →M l＋-αl-β, D → l＋αlβ, D → l＋αvα;α,β=e,μ） within the framework of R-parity violating the（ Rp） Minimal Supersymmetric Standard Model（MSSM）. The comparison shows that combination and product couplings,（λβiα λ＊ ij qor λβqkλ＊αj k）contribution to the branching fractions of the said processes（under consideration） is consistent with or comparable to the experimental measurements in most of the cases. However, some cases exist where these contributions are highly suppressed. We identify such cases in our analysis and single out the important ones suitable for exploring in the future and current experiments.

关键词： supersymmtery R-parity violating MSSM leptonic decays pseudo-scalar meson

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A comparative analysis of radon (^(222)Rn) concentration in the different water sources of Ganderbal, Jammu and Kashmir

引用

Radiation Detection Technology and Methods 2023年第4期7卷 627-635页

作者： Mehak Mohi u Din shakeel Simnani Salik Nazir Sajad Masood Mohammad Rafiq Chakan Supriya Rani Amit Kumar Singla Shahid Saleem Department of Physics University of KashmirSrinagarJ&K190006India Department of Physics Maharaja Ranjit Singh Punjab Technical UniversityBathindaPunjab151001India Department of Geography and Disaster Management University of KashmirSrinagarJ&K190006India

Introduction Radon,a known carcinogen,is the second largest cause of lung carcinoma as per the World Health Organisation.The primary purpose of the present research is to examine and compare the concentrations of radon gas(^(222)Rn)in different sources of water in the Lar and Ganderbal tehsils of the district of Ganderbal,Jammu and Kashmir.Higher groundwater ^(222)Rn concentrations indicate higher indoor radon concentrations and long-term radon exposure is extremely harmful to human health as it increases the risk of developing lung cancer.Method A scintillation-based radon monitor called the smart RnDuo was used to quantify the amount of radon activity present in water samples collected from different locations of Lar and Ganderbal regions of district Ganderbal.Results Average radon(^(222)Rn)concentration of 1.84 BqL^(−1) was found in tap waters,3.73 BqL^(−1) in surface waters,16.56 BqL^(−1) in borewells,and 20.82 BqL^(−1) in springs.The higher radon concentration in groundwater is because of the direct and prolonged interaction of uranium-rich rocks and soil with the water.Hence,monitoring and regulating radon levels in these water sources is crucial to ensure public health and safety.

关键词： Groundwater quality Ganderbal ^(222)Rn detection Scintilation detector

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The effect of pulse voltage rise rate on the polypropylene surface hydrophilic modification by ns pulsed nitrogen DBD

引用

Plasma Science and Technology 2023年第10期25卷 6-14页

作者：刘峰李舒豪赵昱雷 shakeel AKRAM 张丽方志 College of Electrical Engineering and Control Science Nanjing Tech UniversityNanjing 211816People's Republic of China

The nanosecond(ns) pulsed nitrogen dielectric barrier discharge(DBD) is employed to enhance the hydrophilicity of polypropylene(PP) surface and improve its application effect.The discharge characteristics of the ns pulsed nitrogen DBD with different pulse rise times(from 50to 500 ns) are investigated by electrical and optical diagnostic methods and the discharge uniformity is quantitatively analyzed by image processing method.To characterize the surface hydrophilicity,the water contact angle(WCA) is measured,and the physical morphology and chemical composition of PP before and after modification are analyzed to explore the effect of plasma on PP surface.It is found that with increasing pulse rise time from 50 to 500 ns,DBD uniformity becomes worse,energy efficiency decreases from 20% to 10.8%,and electron density decrease from 6.6 × 10^(11)to 5.5 × 10^(11)cm^(-3).The tendency of electron temperature is characterized with the intensity ratio of N_(2)/N_(2)^(+)emission spectrum,which decreases from 17.4 to15.9 indicating the decreasing of T_(e) with increasing pulse rise time from 50 to 500 ns.The PP surface treated with 50 ns pulse rise time DBD has a lower WCA(~47°),while the WCA of PP treated with 100 to 500 ns pulse rise time DBD expands gradually(~50°–57°).According to the study of the fixed-point WCA values,the DBD-treated PP surface has superior uniformity under50 ns pulse rise time(3° variation) than under 300 ns pulse rise time(8° variation).After DBD treatment,the increased surface roughness from 2.0 to 9.8 nm and hydrophilic oxygencontaining groups on the surface,i.***.hydroxyl(-OH) and carbonyl(C=O) have played the significant role to improve the sample’s surface hydrophilicity.The short pulse voltage rise time enhances the reduced electric field strength(E/n) in the discharge space and improves the discharge uniformity,which makes relatively sufficient physical and chemical reactions have taken place on the PP surface,resulting in better treatment uniformity.

关键词： dielectric barrier discharge pulse rise time material surface modification polypropylene uniformity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advancements in the Development of Various Types of Dye-Sensitized Solar Cells:A Comparative Review

引用

Energy Engineering 2021年第4期118卷 737-759页

作者： Sandhia Bai A.K.Amirruddin A.K.Pandey M.Samykano Muhammad shakeel ahmad Kamal Sharma V.V.Tyagi Department of Mechanical Engineering College of EngineeringUniversity Malaysia PahangPahang26300Malaysia Research Centre for Nano-Materials and Energy Technology School of Engineering and TechnologySunway UniversitySelangor47500Malaysia Higher Institution Centre of Excellence UM Power Energy Dedicated Advanced CentreUniversity of MalayaKuala Lumpur59990Malaysia Department of Mechanical Engineering Institute of Engineering and TechnologyGLA UniversityMathura281406India School of Energy Management Shri Mata Vaishno Devi UniversityKatraJammu and Kashmir182320India

The global increase in energy demand has resulted in the depletion of non-renewable resources and caused environmental degradation.Consequently,emerging renewable technologies are a potential solution to fulfil energy demand and mitigate the effect of global warming.Low-cost solar energy harvesting technologies are most feasible technologies.Various solar cells technologies have been developed with improved overall performance and conversion effi-ciency.However,due to low cost and a wide range of applications,dye-sensitized solar cells(DSSCs)have been immensely focused on one of the most promising third-generation solar cells.The highest conversion efficiency of DSSC achieved after three decades of research is more than 14%,but the commercialization of this technology is still a challenge.In this review paper,an attempt has been made to present the comparison of different articles published,that gives the in-depth study of recent developments in various types of DSSCs based on architectural assembly and physical appearance.An overview of the limitations and challenges with their possible improvement strategies have also been discussed.This review paper concludes that appropriate selection of electrolytes dramatically affects the performance of DSSC,and quasi-solid-state electrolyte proves to be a better option.Besides,it also concludes that tandem structures are widely agreed with the approach to expand light utilization spectrum for an overall increase in its performance.However,still,the research is required,which could efficiently widen the applications of the DSSCs.

关键词： Dye-sensitized solar cells solar energy architectural assembly quasi-solid electrolyte tandem structures

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：