检索结果-南通市图书馆

Flow Field-Flow Fractionation with Mass Spectrometry for Top-Down and Bottom-Up Lipidomics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Analysis and Testing 2017年第3期1卷 193-201页

作者： seul kee Byeon Myeong Hee Moon Department of Chemistry Yonsei UniversitySeoul 03722Korea

As lipidomics has attracted increased attention in life science,advanced mass spectrometry(MS)technologies have been combined with other separation techniques to improve and expand the branch of *** review intends to provide general knowledge of offline and online coupling of flow field-flow fractionation(FlFFF)—a technique that encompasses the separation of nano-to micro-scale biomolecules—with MS for analysis of blood plasma lipoproteins,processes that are considered bottomup and top-down approaches,*** first part of this review focuses on the bottom-up method using multiplexed hollow fiber FlFFF(MxHF5)and nanoflow liquid chromatography electrospray-ionization tandem mass spectrometry(nLC-ESI–MS/MS)for non-targeted identification of *** this protocol,plasma lipoproteins of different types are collected using MxHF5,and the lipids within the lipoproteins are then extracted and analyzed via nLC-ESI–MS/*** second part of the review describes the top-down approach,which uses online coupling of miniaturized FlFFF to ESI–MS for a fast screening of targeted ***,the separation of lipoproteins and detection of their component lipids are achieved *** both methods aim to quantify the lipids within lipoproteins,the bottom-up approach provides an extensive lipidome,whereas the top-down method is suitable for high-speed targeted lipidomic *** review discusses variants of FlFFF-ESI–MS/MS that offer effective analytical technologies for lipidomics.

关键词： Lipids Lipoproteins Flow field-flow fractionation Nanoflow liquid chromatography electrospray-ionization tandem mass spectrometry

Stabilized sub-grain and nano carbides-driven 1.2 GPa grade ultra-strong CrMnFeCoNi high-entropy alloy additively manufactured by laser powder bed fusion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第22期117卷 8-22页

作者： Young-Kyun kim kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea Korea Institute of Materials Science(kimS) Changwon 51508Republic of Korea

High-entropy alloys(HEAs)with interstitial atoms that are produced by additive manufacturing have gained intensive interest in the materials science community because of their suitability for constructing high-strength net-shape ***,a strategy to additionally enhance the strength of selective laser melted carbon-containing HEAs was *** as-built carbon-containing HEAs(C_(x)(Cr_(20)Mn_(20)Fe_(20)Co_(20)Ni_(20))_(100-x)(x=0.5 at.%,1.0 at.%,and 1.5 at.%))contain supersaturated carbon,and the extent of supersaturation increases as the carbon content *** subjected to aging treatment at 650°C for 1 h,the microstructure of the three alloys did not change at the grain ***,the microstructure at the sub-grain scale changed markedly,and these changes influenced the tensile properties and deformation *** particular,the tensile strength of aged 1.5C-HEA at 650°C was∼1.2 GPa at room temperature,which is higher than those reported for CrMnFeCoNi ***,the main deformation mechanism changed from deformation twinning to dislocation-mediated slip,resulting in much higher strain hardening capacity after the aging *** work led to the development of an alternative promising method that involves tailoring the microstructure,to enhance the mechanical properties of additively manufactured metallic materials that contain interstitial atoms.

关键词： Selective laser melting High-entropy alloy Carbon contents Aging Microstructure evolution Tensile property Deformation mechanism

Effect of carrier gas species on the microstructure and compressive deformation behaviors of ultra-strong pure copper manufactured by cold spray additive manufacturing

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第2期97卷 264-271页

作者： Young-Kyun kim kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea

Cold spray(CS)which has recently become a promising additive manufacturing(AM)technology,was used to fabricate ultra-strong pure *** addition,the effects of carrier gas species on the microstructural characteristics,mechanical properties and deformation mechanisms were systemically *** CSAM copper manufactured with N_(2) carrier gas reveals a heterogeneous bimodal microstructure consisting of ultra-fine grains at the particle interface and relatively coarse grains in inner *** He carrier gas,a homogeneous grain structure consisting of ultra-fine grains in most areas was *** tests showed that N_(2) and He carrier gasses enabled ultra-high yield strengths of 340 and415 MPa,*** values are comparable to severely plastic deformed copper,which has extremely low ductility and shape *** the other hand,both samples showed a strain-softening phenomenon that does not commonly occur at room *** deformation microstructures revealed that dynamic recovery(DRV)and dynamic recrystallization(DRX)phenomena were generated despite being deformed at room *** on the above findings,the overall deformation mechanisms according to the carrier gas species in the CSAM copper manufacturing process were ***,the work hardening and softening behaviors of CSAM Cu are predicted by using a constitutive equation.

关键词： Cold spray additive manufacturing Carrier gas Pure Cu Mechanical properties Deformation behavior

1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第2期97卷 10-19页

作者： Young-Kyun kim Min-Chul kim kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea Korea Atomic Energy Research Institute(KAERI) Daejeon 34057Republic of Korea

CrMnFeCoNi high-entropy alloys(HEAs)exhibit an excellent combination of tensile strength and ductility at cryogenic *** study led to the introduction of a new method for the development of high-performance CrMnFeCoNi HEAs at cryogenic temperatures by jointly utilizing additive manufacturing(AM)and the addition of interstitial *** interstitial oxygen present in the powder feedstock was transformed into beneficial nano-sized oxides during AM *** HEA nanocomposite fabricated using laser powder bed fusion(L-PBF)not only contains heterogeneous grains and substructures but also a high number density of nano-sized *** tensile results revealed that the L-PBF HEA nanocomposite has superior yield strengths of 0.77 GPa and 1.15 GPa,and tensile strengths of 0.92 GPa and 1.45 GPa at 298 K and 77 K,*** addition,the Charpy impact energies of the samples tested at 298 K and 77 K were measured as 176.2 J and 103.7 J,*** results indicate that the L-PBF HEA nanocomposite successfully overcomes the well-known strength-toughness *** tensile deformation microstructure contained a relatively large number of deformation twins(DTs)at cryogenic temperature,a possible consequence of the decrease in the stacking fault energy with decreasing *** the other hand,cracks were found to propagate along the grain boundaries at room temperature,whereas a transgranular crack was observed at cryogenic temperature in the specimens fractured as a result of the Charpy impact.

关键词： Laser powder bed fusion High-entropy alloy matrix nanocomposite Nano-oxide:cryogenic Tensile Impact toughness

Numerical Analysis of Secondary Cooling in Continuous Slab Casting

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2008年第3期24卷 389-390页

作者： kee-Hyeon Cho Byung-Moon kim Research Institute of Industrial Science & Technology GyeongBuk Regional Stragetic Agency for Innovation

In the present study, a numerical optimization program has been developed for predicting the optimal secondary cooling patterns in a continuous slab caster. Optimization strategy using Broydon-Fletcher-Goldfarb-Shanno （13FGS） method is carried out by determining the constant heat transfer coefficients in each spray zone, which could satisfy the casting conditions and metallurgical criteria specified by the engineer. From the present results, it is found that even a slight variation in the pouring temperature, allowable surface temperature, and casting speed could give rise to the changes in the cooling pattern throughout the spray zones.

关键词： Continuous casting Secondary cooling Optimization

Effect of post heat-treatment on the microstructure and high-temperature oxidation behavior of precipitation hardened IN738LC superalloy fabricated by selective laser melting

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2021年第17期76卷 95-103页

作者： Kyu-Sik kim Sangsun Yang Myeong-Se kim kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea Korea Institute of Materials Science Changwon51508Republic of Korea Auratech Co. Ltd.Seongnam13449Republic of Korea

The present study investigated the effect of as-built and post heat-treated microstructures of IN738LC alloy fabricated via selective laser melting process on high temperature oxidation *** as-built microstructure showed fine cell and columnar structure due to high cooling *** element segregation was observed in inter-cell/inter-columnar *** post heat-treatment,the initially-observed cell structure disappeared,instead bimodal Ni_3(Al,Ti)particles *** temperature(1273 K and 1373 K)oxidation test results showed parabolic oxidation curves regardless of temperature and initial *** as-built IN738LC fabricated via the selective laser melting process displayed oxidation resistance similar to or slightly better than that of IN738LC fabricated via wrought or cast ***-treated SLM IN738LC,although had similar oxidation weight-gain values to those of the SLM asbuilt material at 1273K,showed relatively better oxidation resistance at 1373 *** Ni_3(Al,Ti)precipitate formed in the post heat treatment changed the local chemical composition,thereby led to changes in alumina former/chromia former location and fraction on the alloy *** was concluded that in heat-treated IN738LC increased alumina former fraction was found,and this resulted in excellent oxidation resistance and relatively low weight-gain.

关键词： IN738LC Selective laser melting High temperature oxidation Post heat-treatment Oxidation mechanism

Electronic fingerprint mechanism of NO_(x) sensor based on single-material SnP_(3) logical junction

在线全文

学校读者我要写书评

暂无评论

npj Computational Materials 2022年第1期8卷 2107-2116页

作者： Muhammad S.Ramzan Agnieszka B.Kuc Han seul kim Department of Physics and Earth Sciences Jacobs University BremenCampus Ring 128759BremenGermany Institut für Physik Carl von Ossietzky Universität Oldenburg26129OldenburgGermany Helmholtz-Zentrum Dresden-Rossendorf Abteilung RessourcenökologieForschungsstelle LeipzigPermoserstr.1504318LeipzigGermany Division of National Supercomputing R&D Korea Institute of Science and Technology Information(KISTI)245 Daehak-roYuseong-guDaejeon34141Republic of Korea

An extraordinary sensing ability of the SnP3-based single-material logical junction for harmful NO_(x)gases was explored in the present work through a set of first-principles electronic structure *** a sensing platform,a metal-semiconductor-metal lateral junction composed of a single material was designed based on the metallic/semiconducting characteristics of trilayer/monolayer SnP_(3).Lacking a Schottky barrier at the electrode-channel interface,the gas-specific charge transfer between the SnP_(3) layer and gas molecules was precisely detected based on the current-voltage ***_(x)gases with strong adsorption strength and charge transfer amount on the SnP_(3)substrate were shown to be particularly well detected in this manner,in terms of either the absolute magnitude of the current or negative differential resistance(NDR)at a reasonably small bias voltage as a sensing *** work will provide a new pathway to design a Schottky barrier-free metal-semiconductor junction for highly sensitive sensor applications.

关键词： gases barrier charge

Amine functionalization on thermal and mechanical behaviors of graphite nanofibers-loaded epoxy composites

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第20期151卷 80-88页

作者： Seong-Hwang kim Sang-Jin Park seul-Yi Lee Soo-Jin Park Department of Chemistry Inha University100 InharoIncheon 22212the Republic of Korea

With the growing demand for faster and more powerful computing,effective heat dissipation is essential to ensure the longevity,reliability,and high performance of electronic *** the field of modern electronic packaging materials,there is a great need for graphitic material-loaded polymeric composites(GPCs)with excellent thermal ***,the enhancement efficiency of GPCs is hindered by the agglomeration of fillers and the interfacial thermal resistance caused by the lack of continuous thermally conductive pathways between the filler and *** the interfaces between filler and matrix is of great importance in optimizing the performances of ***,we fabricated graphite nanofibers(GNF)-loaded nanocomposites using acid-functionalized GNF(AGNF)and acidtetraethylenepentamine-functionalized(TGNF)as a filler and epoxy resin as a matrix with different GNF loading contents to explore the interfacial properties of the *** optimal GNF loading for AGNF was 0.5 wt.%,while the TGNF showed 0.75 wt.%.The highest thermal conductivity(0.51 W m^(−1) K^(−1))and fracture toughness(25.8 MPa m^(1/2))values were found in the TGNF-loaded nanocomposites with a fraction of 0.75 wt.%,representing enhancements of∼145%and∼400%,respectively,compared to those of neat *** experimental data presented herein demonstrate that the interfacial properties play a significant role in enhancing the thermal and mechanical performances of the *** present approach is expected to serve as a valuable tool in the design of conductive polymeric nanocomposites for further practical applications,such as thermal interface materials and packaging of high-power electric devices.

关键词： Graphite nanofiber Nanocomposites Interfacial interaction Thermal conductivity Fracture resistance

Recent Advances in Patterning Strategies for Full‑Color Perovskite Light‑Emitting Diodes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第3期16卷 99-137页

作者： Gwang Heon Lee Kiwook kim Yunho kim Jiwoong Yang Moon kee Choi Graduate School of Semiconductor Materials and Devices Engineering Center for Future Semiconductor Technology(FUST)Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Energy Science and Engineering Research Center Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of Materials Science and Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Center for Nanoparticle Research Institute for Basic Science(IBS)Seoul 08826Republic of Korea

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability,pure color emission with remarkably narrow bandwidths,high quantum yield,and solution *** recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes(PeLEDs)to their theoretical limits,their current fabrication using the spincoating process poses limitations for fabrication of full-color *** integrate PeLEDs into full-color display panels,it is crucial to pattern red–green–blue(RGB)perovskite pixels,while mitigating issues such as cross-contamination and reductions in luminous ***,we present state-of-the-art patterning technologies for the development of full-color ***,we highlight recent advances in the development of efficient ***,we discuss various patterning techniques of MPHs(i.e.,photolithography,inkjet printing,electron beam lithography and laserassisted lithography,electrohydrodynamic jet printing,thermal evaporation,and transfer printing)for fabrication of RGB pixelated *** patterning techniques can be classified into two distinct approaches:in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite *** review highlights advancements and limitations in patterning techniques for PeLEDs,paving the way for integrating PeLEDs into full-color panels.

关键词： Perovskite Light-emitting diode Full-color display High-resolution patterning Electroluminescence