检索结果-南通市图书馆

Improving flangeability of multiphase steel by increasing microstructural homogeneity

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1736-1745页

作者： Xiao-yu Yang Yong-gang Yang Xing Fang Han-long zhang Zhen-li Mi Beijing Advanced Innovation Center for Materials Genome Engineering Institute of Engineering TechnologyUniversity of Science and Technology BeijingBeijing 100083China Shanghai Baosteel Group Corp.Technology Center Shanghai 201900China

Multiphase microstructure significantly increases the strength,usually at the expense of flangeability because of lacking microstructure *** further improve the strength-flangeability of multiphase steel,the microstructural homogeneity was advanced by adjusting the hard martensite/austenite(M/A)*** strength-flangeability was measured via uniaxial tensile tests and hole expansion *** microstructures were characterized using a scanning electron microscope equipped with an electron backscatter diffraction detector and a transmission electron *** tests were supplementally used to quantitatively reveal the microstructural homogeneity of the *** show that the adjusted multiphase steel achieves an excellent ultimate tensile strength(~800 MPa)and flangeability(~135%hole expansion ratio).A promising homogeneous multiphase microstructure was obtained by controlling undercooled austenite transformed at about 600℃.This microstructure consists of soft polygonal ferrite,blocky bainitic ferrite,and hard M/A *** volume fraction of M/A islands is around 5%,and the average size is less than l *** nanoindentation analysis indicated that the participation of M/A islands impressively influenced the microstructural *** strain partition and better mechanical compatibility were present in the adjusted multiphase steel since the plasticity initiation started late,which resulted in a positive ***,avoiding M/A islands distributed in the chain along the rolling direction on the matrix hindered the possibility of voids coalescing into cracks and stabilized the flanging performance.

关键词： Multiphase steel Flangeability Martensite/austenite island-Microstructural homogeneity-Microstructure Compact strip production process

Numerical study on influence of protrusion heights on Reynolds stress and viscous stress variations in turbulent vortical structures

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第9期37卷 59-71页

作者： Zhiping LI Long HE Jingsai ZHOU Yueren ZUO Yao YIN Peng zhang Bo MENG Research Institute of Aero-Engine Beihang UniversityBeijing 100191China School of Energy and Power Engineering Beihang UniversityBejing 100191China Institute of Acoustics Chinese Academy of SciencesBeijing 100190China College of Aeronautical Engineering Civil Aviation University of ChinaTianjin 300300China AECC Hunan Aviation Powerplant Research Institute Zhuzhou 412002China

Analysing the infuence mechanism of the riblet protrusion height on turbulent drag components is more beneficial in organising the vortical structure over the riblet ***,the Large Eddy Simulation(LES)is used to investigate the vortex structure over the rib-let surface with different protrusion ***,the variations of Reynolds stress and viscous shear stress in a turbulent channel are *** a result,the drag reduction rate increases from 3.4%when the riblets are completely submerged in the turbulent boundary layer to 7.9%when the protrusion height is *** analysis shows that the protrusion height affects the streamwise vortices and the normal diffusivity of spanwise and normal vortices,thus driving the variation of Reynolds *** with the smooth surface,the vorticity strength and the number of streamwise vortices are weakened near the wall but increase in the logarithmic layer with increased protrusion ***,the normal diffusivity of spanwise vorticity decreases with the increase of protrusion height,and the normal diffusivity of normal vorticity is the smallest when the protrusion height is ***,the protrusion height affects the velocity gradient of the riblet tip and riblet valley,thus driving the variation of viscous shear *** the increase of protrusion height,the velocity gradient of the riblet tip increases dramatically but decreases in the riblet valley.

关键词： Riblet Dragreduction Protrusion height Vortical structure Vortexdiffusivity Reynolds stress Viscous stress

An Improved Chromosome-Level Genome Assembly and Annotation of Belted Beard Grunt(Hapalogenys analis)

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Ocean University of China 2024年第4期23卷 1026-1034页

作者： GAO Tianxiang WANG Yiting SHI Huilai PING Hongling LIU Qi zhang Yang Fishery College Zhejiang Ocean UniversityZhoushan 316022China Zhejiang Province Key Laboratory of Mariculture and Enhancement Zhejiang Marine Fisheries Research InstituteZhoushan 316021China Wuhan Onemore-Tech Co. Ltd.Wuhan 430076China Shenzhen Institute of Quality&Safety Inspection and Research Shenzhen 518000China

Hapalogenys analis(order Lobotiformes)is an economically and ecologically significant fish *** is a typical sedentary rocky reef fish and is primarily found in the northern Pacific ***,we used Hi-C and PacBio sequencing technique to assemble a high-quality,chromosome-level genome for this *** 539 Mb genome had a contig N50 with a size of 3.43 Mb,while 755 contigs clustered into 24 chromosomal groups with an anchoring rate of 99.02%.Of the total genomic sequence,132.74Mb(24.39%)were annotated as repeat elements.A total of 21360 protein-coding genes were identified,of which 20787 genes(97.32%)were successfully annotated to public *** BUSCO evaluation indicated that 96.90%of the total orthologous genes were *** phylogenetic tree representing *** and 14 other bony fish species indicated that the *** genome contained 364 expanded gene families related to olfactory receptor activity,compared with the common ancestor of *** and *** genomic analysis further identified 3584 contracted gene ***-site modeling identified 277 genes experiencing positive selection,which may facilitate the adaptation to rocky reef *** genome reported here is helpful for ecological and evolutionary studies of ***.

关键词： Hapalogenys analis de novo assembly PacBio comparative genomics

Retrieval of Antarctic sea ice freeboard and thickness from HY-2B satellite altimeter data

在线全文

学校读者我要写书评

暂无评论

Acta Oceanologica Sinica 2024年第3期43卷 87-101页

作者： Yizhuo Chen Xiaoping Pang Qing Ji Zhongnan Yan Zeyu Liang Chenlei zhang Chinese Antarctic Center of Surveying and Mapping Wuhan UniversityWuhan 430079China Key Laboratory of Polar Surveying and Mapping Science Ministry of Natural ResourcesWuhan 430079China Key Laboratory of Polar Environment Monitoring and Public Governance Ministry of EducationWuhan 430079China 4 School of Geography and Tourism Anhui Normal UniversityWuhu 241002China

Antarctic sea ice is an important part of the Earth’s atmospheric system,and satellite remote sensing is an important technology for observing Antarctic sea *** Chinese Haiyang-2B(HY-2B)satellite altimeter data could be used to estimate sea ice freeboard and provide alternative Antarctic sea ice thickness information with a high precision and long time series,as other radar altimetry satellites can,needs further *** paper proposed an algorithm to discriminate leads and then retrieve sea ice freeboard and thickness from HY-2B radar altimeter *** first collected the Moderate-resolution Imaging Spectroradiometer ice surface temperature(IST)product from the National Aeronautics and Space Administration to extract leads from the Antarctic waters and verified their accuracy through Sentinel-1 Synthetic Aperture Radar ***,a surface classification decision tree was generated for HY-2B satellite altimeter measurements of the Antarctic waters to extract leads and calculate local sea surface *** then estimated the Antarctic sea ice freeboard and thickness based on local sea surface heights and the static equilibrium ***,the retrieved HY-2B Antarctic sea ice thickness was compared with the CryoSat-2 sea ice thickness and the Antarctic Sea Ice Processes and Climate(ASPeCt)ship-based observed sea ice *** results indicate that our classification decision tree constructed for HY-2B satellite altimeter measurements was reasonable,and the root mean square error of the obtained sea ice thickness compared to the ship measurements was 0.62 *** proposed sea ice thickness algorithm for the HY-2B radar satellite fills a gap in this application domain for the HY-series satellites and can be a complement to existing Antarctic sea ice thickness products;this algorithm could provide long-time-series and large-scale sea ice thickness data that contribute to research on global climate change.

关键词： HY-2B satellite altimeter classification decision tree sea ice freeboard and thickness Antarctic waters

Binding SnO2 Nanoparticles with MoS2 Nanosheets Toward Highly Reversible and Cycle-Stable Lithium/Sodium Storage

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第4期7卷 135-142页

作者： Deliang Cheng Wenbiao zhang Yi Tang Qingsheng Gao Renzong Hu Lichun Yang Min Zhu Institute of Advanced Materials Jiangxi Normal University School of Materials Science and Engineering Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials South China University of Technology College of Chemistry and Materials Science Guangdong Provincial Key Laboratory of Functional Supramolecular Coordination Materials and Applications Jinan University Department of Chemistry Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Laboratory of Advanced Materials and Collaborative Innovation Center of Chemistry for Energy Materials Fudan University

SnO2,with its high theoretical capacity,abundant resources,and environmental friendliness,is widely regarded as a potential anode material for lithium-ion batteries （LIBs）.Nevertheless,the coarsening of the Sn nanop... 详细信息

关键词： 1 T-MoS2 heterostructure lithium-ion batteries Sn coarsening SnO2

Microstructure,mechanical and fracture properties of friction stir welded 2195 Al-Li alloy joints

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第1期37卷 345-361页

作者： Guangda SUN Weizhao SUN Li ZHOU Sanfeng LUO Zili zhang Debo LIU Huiqiang WU State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China Shandong Provincial Key Laboratory of Special Welding Technology Harbin Institute of Technology(Weihai)Weihai 264209China Beijing Institute of Astronautical Systems Engineering Beijing 100076China

The 8 mm-thick 2195 Al-Li alloy joints were achieved by Friction Stir Welding(FSW).The microstructural evolution,temperature-dependent mechanical properties,and fracture properties were *** T1,δ’/β’and θ’precipitates were observed in the Base Metal(BM)and the Heat Affected Zone(HAZ).Most of the precipitates,except for re-precipitated δ’/β’phases,were dissolved in the Nugget Zone(NZ).The tensile specimens that failed at cryogenic temperatures(-196℃)had the maximum Ultimate Tensile Strength(UTS),and the fracture surface showed the inter-granular fracture *** to those at room temperature(25℃),the decreasing tensile properties at high temperature(180℃)were related to microstructure and strain hardening *** NZ presented the optimal fracture toughness,and the Crack Tip Opening Displacement(CTOD)was mutually dominated by microhardness and grain *** on Fatigue Crack Growth(FCG)rates indicates that the Thermal-Mechanically Affected Zone(TMAZ)exhibited the most superior fatigue resistance performance at stress intensity range below17 MPa.m1/2due to compressive residual stress and the crack closure *** fatigue fracture surfaces reveal that the crack propagation zone was characterized by the striations and secondary ***,inter-granular fracture behavior was responsible for the fastest FCG rates in the NZ.

关键词： Aluminum alloys Friction stir welding Microstructural evolution Mechanical properties Fracture mechanism

B-COPNA resin formation from ethylene tar light fractions:Process development and mechanical exploration by molecular simulation

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第6期70卷 118-129页

作者： Hongyan Shen Lingrui Cui Xingguo Wei Yuanqin zhang Lian Cen Jun Xu Fahai Cao Engineering Research Center of Large Scale Reactor East China University of Science and TechnologyShanghai 200237China

An efficient utilization strategy of ethylene tar(ET),the main by-product of the ethylene cracking unit,is urgently required to meet demands for modern petrochemical *** the other hand,condensed polynuclear aromatic resin of moderate condensation degree(B-COPNA)is a widely used carbon material due to its superb processability,the production of which is,however,seriously limited by the high cost of raw *** such context,an interesting strategy was proposed in this study for producing B-COPNA resin using crosslinked light fractions of ethylene tar(ETLF,boiling pointbenzenedimethanol(PXG)was first selected as the crosslinking agent according to the findings of molecular *** effects of operating conditions,including reactions temperature,crosslinking agent,and catalyst content on the softening point and yield of B-COPNA resin products were then investigated to optimize the *** reaction mechanism of resin production was studied by analyzing the molecular structure and transition state of ETLF and crosslinking *** was shown that PXG exhibited a superior capacity of withdrawing electrons and a higher electrophilic reactivity than other crosslinking *** addition to the highest yield and greatest heat properties,PXG-prepared resin contained the most condensed *** corresponding optimized conditions of resin preparation were 180℃,1:1.9(PXG:ETLF),and 3%(mass)of catalyst content with a resin yield of 78.57%.It was the electrophilic substitution reaction that occurred between the ETLF and crosslinking agent molecules that were responsible for the resin formation,according to the experimental characterization and molecular ***,it was confirmed that the proposed strategy and demonstrated process can achieve a clean and high value-added utilization of ETLF via B-COPNA resin preparation,bringing huge economic value to the current petrochemical industry.

关键词： Ethylene tar Crosslinking COPNA resin Molecular simulation Transient state

Mechanism of Diabatic Heating on Precipitation and the Track of a Tibetan Plateau Vortex over the Eastern Slope of the Tibetan Plateau

在线全文

学校读者我要写书评

暂无评论

Advances in Atmospheric Sciences 2024年第1期41卷 155-172页

作者： Yuanchang DONG Guoping LI Xiaolin XIE Long YANG Peiwen zhang Bo ZENG Institute of Plateau Meteorology China Meteorological Administration(CMA)/Heavy Rain and Drought-Flood Disaster in Plateau and Basin Key Laboratory of Sichuan ProvinceChengdu 610072China School of Atmospheric Sciences Chengdu University of Information TechnologyChengdu 610225China Meteorological Observation Data Center of Sichuan Province Chengdu 610072China Sichuan Branch of Meteorologist Training Institute CMAChengdu 610072China

Existing studies contend that latent heating(LH)will replace sensible heating(SH)to become the dominant factor affecting the development of the Tibetan Plateau vortex(TPV)after it moves off the Tibetan Plateau(TP).However,in the process of the TPV moving off the TP requires that the airmass traverse the eastern slope of the Tibetan Plateau(ESTP)where the topography and diabatic heating(DH)conditions rapidly *** LH gradually replaces SH to become the dominant factor in the development of the TPV over the ESTP is still not very *** this paper,an analysis of a typical case of a TPV with a long life history over the ESTP is performed by using multi-sourced meteorological data and model *** results show that SH from the TP surface can change the TPV-associated precipitation distribution by temperature advection after the TPV moves off the *** LH can then directly promote the development of the TPV and has a certain guiding effect on the track of the *** SH can control the active area of LH by changing the falling area of the TPV-associated precipitation,so it still plays a key role in the development and tracking of the TPV even though it has moved out of the main body of the TP.

关键词： eastern slope of the Tibetan Plateau diabatic heating Tibetan Plateau vortex precipitation distribution track

Effect of wall-disruption on nutrient composition and in vitro digestion of camellia and lotus bee pollens

在线全文

学校读者我要写书评

暂无评论

Food Science and Human Wellness 2024年第3期13卷 1567-1577页

作者： Yuan Yuan Shun Zhong Zeyuan Deng Guangyan Li Jinwu zhang Hongyan Li State Key Laboratory of Food Science and Resources Nanchang UniversityNanchang 330047China Nanchang Tongxin Zichao Biological Engineering Co. Ltd.Nanchang 330052China

The nutrient digestion,absorption and biological activity of bee pollen may be limited due to the complex pollen ***,the effect of superfine grinding technology on the release of nutrients from bee pollen were investigated,and their antioxidant activities and in vitro digestion were explored in this *** showed that the content of nutrients in bee pollen increased after wall *** them,fat content increased by 22.55%-8.31%,protein content increased by 0.54%-4.91%,starch content increased by 36.31%-48.64%,soluble sugar content increased by 20.57%-29.67%,total phenolic acid content increased by 11.73%-86.98%and total flavonoids content increased by 14.29%-24.79%.At the same time,the antioxidant activity increased by 14.84%-46.00%.Furthermore,the active components such as phenolic compounds in the wall-disruption bee pollen were more readily to be released during the in vitro digestion,and easier to be absorbed because of their higher *** activities during in vitro digestion were also improved in walldisruption bee *** findings provide evidence that bee pollen wall disruption was suggested,thus,it is more conducive to exerting the value of bee pollen in functional foods.

关键词： Bee pollen Nutrients Wall disruption Phenolic compounds In vitro digestion