检索结果-南通市图书馆

Hole cleaning evaluation and installation spacing optimization of cuttings bed remover in extended-reach drilling

Petroleum Science 2024年第3期21卷 2005-2022页

作者： Shuo peng wen-Jun Huang De-Li Gao MOE Key Laboratory of Petroleum Engineering China University of Petroleum-BeijingBeijing102249China State Key Laboratory of Petroleum Resources and Engineering China University of Petroleum-BeijingBeijing102249China

In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the *** cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,and pipe stuck probably occur,which results in a lot of non-productive time and remedial *** bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring *** paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning ***,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation,and a new type of cuttings bed remover was ***,an evaluation method of hole cleaning effect of remover was *** that,the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid,rotational speed of drillpipe,rate of penetration,wellbore size,rheological property of drilling fluid,and remover eccentricity on the performance of cuttings bed remover were *** results demonstrate that the new type of remover with streamline blade performs better than conventional *** efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe,flow rate of drilling fluid,remover eccentricity,and 6 rpm Fann dial reading for drilling *** higher rate of penetration and large wellbore size result in worse hole *** findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.

关键词： Extended-reach drlling Drilling hydraulics Cuttings transport Hole cleaning Cuttings bed remover

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nonlinear metamaterial enabled aeroelastic vibration reduction of a supersonic cantilever wing plate

引用

Applied Mathematics and Mechanics(English Edition) 2024年第10期45卷 1749-1772页

作者： peng SHENG Xin FANG Dianlong YU Jihong wen Laboratory of Science and Technology on Integrated Logistics Support College of Intelligence Science and TechnologyNational University of Defense TechnologyChangsha 410073China

The violent vibration of supersonic wings threatens aircraft *** paper proposes the strongly nonlinear acoustic metamaterial(NAM)method to mitigate aeroelastic vibration in supersonic wing *** employ the cantilever plate to simulate the practical behavior of a *** aeroelastic vibration model of the NAM cantilever plate is established based on the mode superposition method and a modified third-order piston *** aerodynamic properties are systematically studied using both the timedomain integration and frequency-domain harmonic balance *** presenting the flutter and post-flutter behaviors of the NAM wing,we emphasize more on the preflutter broadband vibration that is prevalent in *** results show that the NAM method can reduce the low-frequency and broadband pre-flutter steady vibration by 50%-90%,while the post-flutter vibration is reduced by over 95%,and the critical flutter velocity is also slightly *** clarified,the significant reduction arises from the bandgap,chaotic band,and nonlinear resonances of the NAM *** reduction effect is robust across a broad range of parameters,with optimal performance achieved with only 10%attached *** work offers a novel approach for reducing aeroelastic vibration in aircraft,and it expands the study of nonlinear acoustic/elastic metamaterials.

关键词： nonlinear acoustic metamaterial(NAM) hypersonic aeroelastic vibration vibration reduction fluid-structure interaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The homogenous growth of Co-based coordination compound on graphene nanosheet for high-performance K-organic battery and its reaction mechanism

引用

Rare Metals 2024年第4期43卷 1622-1634页

作者： qian-qian peng Yi-Ting Wang Shuo Qi Yao Xiao Yong Wang Shuang-qiang Chen School of Environmental and Chemical Engineering Shanghai UniversityShanghai200444China School of Chemistry and Materials Engineering Wenzhou UniversityWenzhou325035China

Metal coordination compounds(MCCs)are gaining popularity for potassium-ion batteries(PIBs)owing to their tuneable structure,multiple reaction sites,low cost and unique ***,they are generally subjected to intrinsic features of the sluggish ionic diffusion coefficient,low electronic conductivity and slow ***,a new MCC material of cobalt-1,3,5-trioxy-2,4,6-triamino-benzo(Co-TB)coordination compound was synthesized and homogenously grown on the surface of graphene nanosheets(GNS),forming a Co-TB@GNS composite with enhanced electronic conductivity and flexible *** from the overall enhanced conductivity,high surface area and abundant activated K-storage sites,Co-TB@GNS electrodes have exhibited superior cycling performance with high reversible capacities(312 mAh·g^(-1)after 100 cycles at 100 mA·g^(-1),224 mAh·g^(-1)after 500 cycles at 1 A·g^(-1))and better rate performances compared with the pure Co-TB compound when served as PIB's ***,multiple in-situ measurement techniques have jointly confirmed that the organic functional groups(C=O,C=N and C=C of benzene rings)and Co^(2+)in Co-TB are the main reversible K-storage sites,including in-situ Fourier transform infrared spectroscopy(FTIR)and X-ray diffraction(XRD),and partial capacity contribution is originated from GNS by the apparent K-storage behavior in the in-situ XRD pattern,proving the possibility of K-storage for metal-organic materials.

关键词： Metal coordination compounds Potassiumion battery Cobalt coordination compound K-storage mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Joined AZ31B Magnesium Alloys with Ag Interlayer by Ultrasonic-Induced Transient Liquid Phase Bonding in Air

引用

Acta Metallurgica Sinica(English Letters) 2024年第7期37卷 1177-1185页

作者： qian Wang peng Yu Haoran Lin Chongzhi Guo Xiaoqiang Hu Ganjiang Innovation Academy Chinese Academy of SciencesGanzhou341119China School of Rare Earths University of Science and Technology of ChinaHefei230026China Shenyang 7D New Materials Equipment Co.LTD. Shenyang110076China Shenyang National Laboratory of Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang110016China

AZ31B magnesium alloys are commonly used in lightweight structures of automobile and aerospace *** this work,the ultrasonic-induced transient liquid phase bonding technique is deployed to joint AZ31B magnesium alloys at 490℃ with Ag interlayer in the *** effect of ultrasonic vibration on microstructure and mechanical properties of welding seam is *** vibration duration increases,the width of the welding seam increases firstly and then *** the ultrasound vibration sustained for one second,the eutectic reaction occurred in the contacting interface between Ag interlayer and the base metal AZ31B,resulting in formation of liquid phase and metallurgical *** the ultrasound vibration sustained for seven second,the width of the welding seam increased to a maximum of about 303.1μm and the average shear bond strength of the welding joint attained the peak value of about 66.87 *** the ultrasound vibration sustained over seven seconds,the liquid phase is gradually squeezed out and the width of the welding seam decreases.α-Mg and AgMg_(3) can be observed in the welding *** analysis shows thatα-Mg has a certain strengthening *** whole process of appearance,growth and integration ofα-Mg is analyzed.

关键词： Ultrasonic bonding Magnesium alloy Silver Microstructure Intermetallic compound

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Local Hamilton type Gradient Estimates and Harnack Inequalities for Nonlinear Parabolic Equations on Riemannian Manifolds

引用

Acta Mathematicae Applicatae Sinica 2024年第2期40卷 539-546页

作者： wen WANG Da-peng XIE Hui ZHOU School of Mathematics and Statistics Hefei Normal UniversityHefei 230601China

In this paper,we prove a local Hamilton type gradient estimate for positive solution of the nonlinear parabolic equation ut(x,t)=Δu(x,t)+au(x,t) ln u(x,t)+bu^(α)(x,t),on M×(-∞,∞) with α∈R,where a and b are *** ... 详细信息

关键词： nonlinear parabolic equation gradient estimate Harnack inequality

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multifunctional carbon materials from rugose rose for energy storage and water purification

引用

Frontiers of Chemical Science and Engineering 2024年第9期18卷 1-13页

作者： peng-Hui Li Hui Zhou wen-Juan Wu Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources Nanjing Forestry UniversityNanjing 210037China College of Light Industry and Food Engineering Nanjing Forestry UniversityNanjing 210037China College of Chemical Engineering East China University of Science and TechnologyShanghai 200237China State Key Laboratory of Chemical Engineering Shanghai 200237China

With the advancement of social process,the resource problem is becoming more prominent,biomass materials come into being,and it is becoming more and more important to explore and prepare efficient and multifunctional biomass materials to alleviate the problems of energy storage and water *** this paper,nitrogen-doped hierarchical porous carbon materials(NRRC)were produced by one-step carbonization of withered rose as raw material and melamine as nitrogen source with KOH-activated *** resulting nitrogen-doped porous carbon material had the most abundant pores and the best microspherical graded pore structure,with a specific surface area of up to 1393 m2·g^(-1),a pore volume of 0.68 cm3·g^(-1),and a nitrogen-doped content of 5.52%.Electrochemical tests showed that the maximum specific capacitance of NRRC in the three-electrode system was 346.4 F·g^(-1)(0.5 A·g^(-1)),which was combined with favorable capacitance retention performance and cycling *** NRRC//NRRC symmetric supercapacitors were further assembled,and the maximum energy density of a single device was 23.88 Wh·kg^(-1),which still maintains excellent capacitance retention and cyclic charging/discharging *** example,the capacitance retention rate was always close to 96.27%with almost negligible capacitance loss after 10000 consecutive charge/discharge cycles(current density:10 A·g^(-1)).Regardless of the three-electrode or two-electrode system,the super capacitive performance of NRRC porous carbon materials was comparable to the electrochemical performance of many reported biomass porous carbon materials,which showed better energy storage advantages and practical application *** addition,NRRC porous carbon materials had excellent water purification *** dye adsorption test confirmed that NRRC had a high adsorption capacity(491.47 mg·g^(-1))for methylene *** undoubtedly also showed a potential and promising avenue for high value-added utilization

关键词： rose carbon adsorption electrode material electrochemical performance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multi-Objective Optimization of Aluminum Alloy Electric Bus Frame Connectors for Enhanced Durability

引用

Computer Modeling in Engineering & Sciences 2024年第7期140卷 735-755页

作者： wenjun Zhou Mingzhi Yang qian peng Yong peng Kui Wang qiang Xiao Key Laboratory of Traffic Safety on Track Ministry of EducationSchool of Traffic&Transportation EngineeringCentral South UniversityChangsha410018China School of Mechanical and Automotive Engineering Xiamen University of TechnologyXiamen361024China

The widespread adoption of aluminumalloy electric buses,known for their energy efficiency and eco-friendliness,faces a challenge due to the aluminum frame’s susceptibility to deformation compared to *** issue is further exacerbated by the stringent requirements imposed by the flammability and explosiveness of batteries,necessitating robust frame *** study aims to optimize the connectors of aluminum alloy bus frames,emphasizing durability,energy efficiency,and *** research delves into Multi-Objective Coordinated Optimization(MCO)techniques for lightweight design in aluminum alloy bus body *** goal is to enhance lightweighting,reinforce energy absorption,and improve deformation resistance in connector *** typical aluminum alloy connectors were selected and a design optimization platform was built for their MCO using a variety of software and ***,through three-point bending experiments and finite element analysis on three types of connector components,we identified optimized design parameters based on deformation ***,employing Optimal Latin hypercube design(OLHD),parametric modeling,and neural network approximation,we developed high-precision approximate models for the design parameters of each connector component,targeting energy absorption,mass,and logarithmic ***,utilizing the Archive-based Micro Genetic Algorithm(AMGA),Multi-Objective Particle Swarm Optimization(MOPSO),and Non-dominated SortingGenetic Algorithm(NSGA2),we explored optimized design solutions for these joint ***,we simulated joint assembly buckling during bus rollover crash scenarios to verify and analyze the optimized solutions in three-point bending *** joint component showcased a remarkable 30%–40%mass reduction while boosting energy *** design optimization method exhibits high efficiency and *** contemporary automation technology,the design optimiza

关键词： Aluminum connectors three-point bending simulation parametric design model multi-objective collaborative optimization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A large language model-powered literature review for high-angle annular dark field imaging

引用

Chinese Physics B 2024年第9期33卷 76-81页

作者： wenhao Yuan Cheng peng qian He Department of Material Science and Engineering College of Design and EngineeringNational University of Singapore9 Engineering Drive 1EA#03-09117575Singapore Centre for Hydrogen Innovations National University of SingaporeE81 Engineering Drive 3117580Singapore

High-angle annular dark field(HAADF)imaging in scanning transmission electron microscopy(STEM)has become an indispensable tool in materials science due to its ability to offer sub-°A resolution and provide chemical information through *** study leverages large language models(LLMs)to conduct a comprehensive bibliometric analysis of a large amount of HAADF-related literature(more than 41000 papers).By using LLMs,specifically ChatGPT,we were able to extract detailed information on applications,sample preparation methods,instruments used,and study *** findings highlight the capability of LLMs to provide a new perspective into HAADF imaging,underscoring its increasingly important role in materials ***,the rich information extracted from these publications can be harnessed to develop AI models that enhance the automation and intelligence of electron microscopes.

关键词： large language models high-angle annular dark field imaging deep learning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Tuning heterogeneous microstructures to enhance mechanical properties of nano-TiN particle reinforced Haynes 230 composites by laser powder bed fusion

引用

Rare Metals 2024年第9期43卷 4548-4565页

作者： wen-Jie Liu Hui Li qian-Xing Yin He-Jun Du School of Power and Mechanical Engineering Wuhan UniversityWuhan 430072China The Institute of Technological Sciences Wuhan UniversityWuhan 430072China School of Mechanical&Aerospace Engineering Nanyang Technological UniversitySingapore 639798Singapore

Laser powder bed fusion(LPBF)is considered to be one of the most promising additive manufacturing technologies for producing components with geometries and high geometrical precision that are unattainable by traditional *** superalloy exhibits exceptional mechanical and high-temperature performances,rendering it a prime candidate for advanced aero-engine *** the high demand for LPBF-manufactured superalloys,the superalloy is one of the materials manufactured difficultly by LPBF due to their large laser absorptivity fluctuation,poor molten pool stability and sharp temperature ***,superalloys are characterized by severe pores,undesirable coarse columnar grains and poor mechanical *** this work,the effect of nano-TiN particles on defects,molten pool characteristics and microstructure and performance of the composites were *** 4.5 wt%TiN/Haynes230 samples exhibited exceptional nanohardness and elastic modulus with maximum values reaching 5.53 GPa and 240.03 GPa,*** superior mechanical properties were attributed to the combined effects of spatter and gas pore inhibition,grain refinement and duplex nanophases ***,the stability of molten pool was enhanced,and spatter was effectively suppressed by adding nano-TiN particles,while grain refinement and columnar to equiaxed transitions were ***,the matrix exhibited a high dislocation density due to a significant hindrance of dislocation movement caused by massive nano-phases(e.g.,TiN and M_(23)C_(6)),resulting in the formation of extensive dislocation tangles and *** work offers novel insights into the role of nanoparticles reinforced superalloy composites by LPBF.

关键词： Composites Laser powder bed fusion Molten pool characteristics Microstructure Mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical properties and fracture surface roughness of thermally damaged granite under dynamic splitting

引用

Deep Underground Science and Engineering 2024年第1期3卷 103-116页

作者： Yijin qian peng Jia Songze Mao Jialiang Lu School of Resources and Civil Engineering Northeastern UniversityShenyangChina

In order to understand the mechanical properties and the fracture surface roughness characteristics of thermally damaged granite under dynamic splitting,dynamic Brazilian splitting tests were conducted on granite samples after thermal treatment at 25,200,400,and 600℃.Results show that the dynamic peak splitting strength of thermally damaged granite samples increases with increasing strain rate,showing obvious strain‐rate *** increasing temperature,thermally induced cracks in granite transform from intergranular cracks to intragranular cracks,and to a transgranular crack *** induced damages reduce the dynamic peak splitting strength and the maximum absorbed energy while increasing the peak radial *** fracture mode of the thermally damaged granite under dynamic loads is mode Ⅱ splitting *** using the axial roughness index Z2 a,the distribution ranges of the wedge‐shaped failure zones and the tensile failure zones in the fracture surfaces under dynamic Brazilian splitting can be effectively *** radial roughness index Z_(2)^(r)is sensitive to the strain rate and *** shows a linear correlation with the peak splitting strength and the maximum absorbed energy and a linear negative correlation with the peak radial strain.Z_(2)^(r)can be used to quantitatively estimate the dynamic parameters based on the models proposed.

关键词： dynamic splitting fracture surface roughness granite strain rate thermal treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：